70 k used for sale

General SKU366W1294 LocationBarneveld MakeKHS TypeEFA 60.125CW12 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Number of horizontal pressure tanks1 Main Features MaterialStainless steel Volume150 Ltr. Pressure6 Bar Surface0.28 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface0,28m² Capacity150l Vessel sizesDia. 600x600 mm Plate sizesDia. 600MM Top connectionscheck DN25 Liquid outletcheck DN25 With jacketcheck Max. temperature-25°C/+200°C Nutsche filters Capacity150 l. MaterialStainless steel 1.4435 (316L), Stainless steel 1.4571 (316Ti) Information No.963182 Mach.No.963182 Year of construction2000 Mounted on legscheck Floorspace1,20x1,15 m Total height1,90 m Weight860 KG Extra Specificationsthe bottom can be opened hydraulically by hand pump Technical specs Ex ...

General SKU405W1265 MakeWAB Bachhofen TypeKD15 LocationBarneveld Main Features MaterialStainless steel Volume15 Ltr. Motor17.5 KW Specified Features - Sand mill MaterialStainless steel 1.4000 (410S) Sand mills Ball millcheck Capacity15 l., (12,5l.) Drum sizesdia. 200x410mm InletDia. 35mm Outletcheck Motor17,5 kW, 380 volt, 1450 rpm (EX) With variable speed drive1305 rpm Speed13 m/sek Information No.890289 Year of construction1989 With switchcheck Floorspace1,150x0,70 m Total height1,60 m Weight560 kg ATEX compatiblecheckSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU331W744 LocationBarneveld CEcheck MakeGWK Pressure Working pressure19 Bar Main Features Heating (medium)Electric Capacity46 KW Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Heating medium:R404A (cooling) Electric capacity64 kW With coolingcheck Capacity46 kW Temperature-25°C Tank capacity800 With pumpcheck Capacity16 m³/h Motor4 kW, 400/230 volt With temperature controllercheck Information TypeKCL100/46AZ Mach.No.20 7515 04-01 Year of construction2005 With switchcheck Floorspace3,80 x 1,75 m Total height2,35 m Weight2000 kgTemperature control unitsGWKHeat exchangers > Temperature control unitsBrand > GWK What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machi ...

General SKU237W266 LocationBarneveld CEcheck MakePhartec Krause Main Features MaterialStainless steel Motor4 KW Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Miscellaneous filters CapacityPermeability 700 l/h CapacityConcentrate discard 300 l/h Information TypePhartec RO600-2 St Year of construction2001 Floor space2,0 x 0,80 m Total height1,75 m Weight650 kg Extra Specifications- water quality 3,0 µS - control cabinet as is - Grundfos water pumps, type CRN 3, cap. 3 m3/h, 2,20 kW - Grundfos water pumps, type CRN 2, cap. 2,5 m3/h, 1,50 kW, - 2 filters -6 pressure pipes Miscellaneous filtersPhartec KrauseFilters > Miscellaneous filtersBrand > Phartec Krause What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...

General SKU252W328 MakeFryma Koruma LocationBarneveld CEcheck TypeVME-120/C Pressure Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume120 Ltr. Motor15 KW Specified Features - Processing vessel MaterialStainless steel 1.4435 (316L) Closed stirring vesselcheck Capacity226 Ltr. (netto 120 Ltr.) Vessel sizesDia. 900x650 mm Dished bottomcheck Hollow bottomcheck Flat top sidecheck With covercheck Top connectionscheck Outlet2x 40 mm, 1x 80 mm With jacketcheck Volume 28 ltr. Max. temperature140°C With anchor stirrercheck Motor3,0 kW, 400 volt, 1410 rpm Speed mixing shaft27 rpm With homogenisercheck Motor15 kW, 1460 rpm Information No.100497 Year of construction2002 Mounted on legscheck With switchgearcheck (as is) Floorspace3,45x1,50 m Total height2,10 m Weight2000 kg Extra Specifications- With hydraulic unit.  ...

General SKU292W525 MakeDynomill LocationBarneveld TypeKD45 CN Main Features MaterialStainless steel Volume49 Ltr. Motor44 KW Specified Features - Sand mill MaterialStainless steel Horizontal sand millcheck Capacity46 Ltr. Motor44 kW, 380 volt. 1475 rpm Rotor speed1170/995/750 tpm CapacityCap. 450-1350 l, theori cap. 350-450 kg/h Information No.860411 Year of construction1986 With switchcheck Floorspace1,5 x 0,80 m Total height1,70 m Weight1250 kg ATEX compatiblecheck Extra Specifications- Grinding media filling 37-39 l. : : - Peripheral speeds of agitator discs 16/13/10 m/s Sand millsDynomillMills > Sand millsBrand > Dynomill What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vis ...

General SKU300U575 MakeFeutron Klimasimulation GmbH TypeKlimaprüfkammer KPK 400 No.003 Year of construction2002 LocationBarneveld Main Features MaterialStainless steel Volume400 Ltr. Max.temp.100 °C Specified Features - Drying oven Drying ovencheck Climate boxcheck Max. temperature+5/100 °C Capacity400 Ltr. Internal width720 mm Internal depth620mm Internal height860 mm Electric heatingcheck Electric capacity6,3 kW Number of doors:1 With air circulationcheck With fancheck Motor0,18 kW 220/230 Volt With air humidificationcheck With cooling compressorcheck With trayscheck (3x) MaterialStainless steel 1.4301 (304) Information With switchcheck Floorspace1,2x1,4 m Total height2,3 m Weight600 kg CEcheck Extra SpecificationsClimate Range: 10…95 °CTemperature Tolerance: (0.2…0.5)KHumidity Range: 10…98% relative humidityHumidity Tolerance: (2…3)% rel ...

General SKU354T975 LocationBarneveld MakeK-tron Main Features MaterialStainless steel Motor0.37 KW Inlet diameter145 mm Specified Features - Metering screw MaterialStainless steel Metering screws Metering screwcheck Screw diameterdia. 35 mm Screw length2x 240 mm With hoppercheck Capacity± 165 Ltr. Hopper sizesdia. 650/200x1070 mm Inlet145 mm Outletdia. 70x40 mm With motor0,37 kW, 200 volt With DC motorcheck Without controlcheck(as is) Screw speed2000 rpm With breaking/mixing shaftcheck With vibro motorcheck Information TypeK2M-T35 No.10224295/263120 Year of constructionUnknown Mounted on framecheck Floorspace1,3x1,1 m Total height1,8 m Weight420 kgMetering screwsK-tronDosing units > Metering screwsBrand > K-tron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinatio ...

General SKU245U288 MakeKrauss Maffei TypeSZ 51-8 No.11468 Year of construction1995 Mounted on framecheck Main Features MaterialStainless steel Motor18.5 KW Inlet diameter70 mm Specified Features - Pusher centrifuge Pusher centrifugecheck Basket diameterdia. 604 mm Basket width675 mm Wall thickness20 mm Max. loading weight53,6 kg Motor18,5 kW, 1470 rpm Max. basket speed665 rpm Hydraulic operated pushercheck With hydraulic unitcheck Motor11 kW Inletdia. 70 mm Solids outlet300x80 mm Liquid outlet430x110 mm MaterialStainless steel 1.4539 (904L) Information LocationBarneveld Floorspace2,58x1,20 m Total height1,3 m Weight2450 kg CEcheck Extra SpecificationsTemerature range 10-110°, adm. density 1060 kg/m3 :  :Pusher centrifugesKrauss MaffeiCentrifuges > Pusher centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition ...

General SKU212T101 MakeKuehni TypeMixer setler column No.2046 Year of construction2001 LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume6380 Ltr. Motor2.2 KW Specified Features - Extraction Extractorcheck Capacity6380 Ltr. Diameter910 mm Length10175 Max. temperature-10/200°C With rotorcheck Motor2,2kW, 230/400 Volt, 1420 rpm( EX) Rotor speed42 rpm MaterialStainless steel 1.4571 (316Ti) Information Floorspace1.6x1.6 m Total height11.85 m Weight2920 kg ATEX compatiblecheckExtractionKuehniColumns > ExtractionBrand > Kuehni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machi ...

pressure: 40.0 t chamfer lenght: 1600 mm distance between columns: 1100 mm stroke of upper beam: 100 mm throat: 195 mm working feed: 10.0 mm/sec return speed: 70.0 mm/sec : 180 bar work height max.: 840 mm table width: 110 mm dayligth: 295 mm Control: ATL 550 total power requirement: 5.5 kW weight: 2500 kg range L-W-H: 2100 x 1200 x 1800 mm Equipment: - NC-controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control - model ATL 550 Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1 Y2 axis) Possibility of programming different programs Memory capacity max. 200 programs - max. 400 blocks Swivel control panel, left front - Electro-motorized backgauge (X axis) with 2x stop fingers, manually adjustable (R Z axis) - Tool holder system A - with top wedge crowning - Split insert/bending tools - Lateral safety guards - rear safety guard - 1x fr ...

voltage: 220 V collets: 8mm Motor output: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1500 mm, 4500 mm

Versatile turning/machining center for full-fledged turning and complex drilling and milling. Turning diameter 1500 mm Center width 4500 mm X Travel 1000 mm Y Travel 350 mm Z Travel 5000 mm - 4 Sheet bed machine - Powerful spindle box with backlash-free C-axis - Full-fledged milling in 3 axes (Y-axis = 340 mm) - Direct measuring system in each CNC axis - Infinitely adjustable motor milling spindle - Klaaßen motor milling spindle 37kW/4000 1/min/330 Nm (S1) - Automatic tool change for turning and milling tools - Steady rests and tailstock can be completely driven over - Internal milling head - Grinding support - Extensive range of accessories available The machine has been regularly serviced and is in very good technical condition. There are technical drawings and parts lists for the components and assemblies of the machine. Documentation and technical data ...

Inv. Num. : 8966 Type: Optimat KAL 210/A3/S Producer: HOMAG Created: 2008 Parameters: Control System: Power Control PC 22 Binding height: 950 mm Edge thickness: 0.3-3 mm Part thickness: 12-40mm Feed speed: 18-25 m/min Minimum. Material width: 60 mm Machine dimensions: 8300 × 1300 × 1800 mm

Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-s ...

sheet width - max.: 1020 mm plate thickness: 1,5 mm cutting length: 1020 mm weight: ca. 300 kg dimensions of the machine ca.: 1,3 x 0,8 m Condition: good, demo machine: Side stop: 600 mm Material place of deposit: ausziehbar Hand lever shears with counterweight, length stop, blank holder with Quick clamping, mm scale on the table, pull-out sheet metal support. Demonstration machine at a special price. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: / mm turning length: / mm workpiece length: / mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

deal for mozzarella sticks up to 27 cm long and a diameter of 5 cm. Completely in stainless steel

KAMAZ 53213 (KO-505A) Box: Cistern Color: orange Motor: 10850 cm³ Motor power: 154 kW Top: Diesel Dimensions Length 8300 mm Width 2500 mm Height 2830 mm Trek - Masses Gross Weight 20500 kg Registration weight 20500 kg Empty weight 10140 kg Load capacity 10360 kg

Demonstration device Hand punch incl. 4-piece haulm divider and haulm plate DIMENSIONS Length 840 mm Width 585 mm Height 1120 mm Weight 42 kg

Have for sale new bearing bush for Fryma Koruma corundum disc mill T5 and MK320

A high-performance Homag Edgebanding Line paired with a Ligmatech Automatic Return System. This combination allows for a "one-man operation," where the machine applies the edges and then automatically sends the panels back to the operator for the next pass. Below is a professional draft for an online listing. --------------------------------------------------------------- For Sale: 2007 Homag Optimat Edgebanding Cell Featuring: Homag KAL 310 Edgebander & Ligmatech ZHR 05 Return System This is a complete, industrial-grade edgebanding solution manufactured in Germany. The set consists of a high-speed Homag KAL 310 single-sided edgebander and a Ligmatech ZHR 05 Boomerang return conveyor. This setup is designed for high-volume production, significantly reducing labor costs by allowing a single operator to manage the entire infeed and outfeed process. Machine 1: Homag Optimat KAL 310/10/ ...

Feed rate: 50-1000 mm/min, operating voltage: 3x 400 V, control voltage: 24 V, rated current: 12 A. On-site viewing is possible.

workpiece weight: - kg workpiece length: - mm diameter: - mm documentation: vorhanden dimensions of the machine ca.: 4,10 × 1,20 × 1,40 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hobbing length: 1750 mm milling width: 260 mm max. module: 10 mm table size incl. water gutter: 460 x 2100 mm table clamping surface:: 250 x 1850 mm cutter width - max.: 100 mm feed of the milling slide, stepless: 0 - 500 mm/min. rapid traverse feeds: 3000 mm/min milling head -swivable +/-: 30 ° Rotation speed range of milling head, in 9 steps: 29 - 178 rpm Milling head swivable 2 sides helical gearcutting: 30 ° total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: 4 x 1,85 x 1,85 m Equipment/accessories - 7 vices - change wheels - Clamping devices - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heidelberg Stahlfolder KD78.1/4 KTL-PD, Year 2002 Palletfeeder 4 pockets 2 knives Delivery SB-66/MP. D Stream delivery Gate-fold unit Etc. Available: immediately

Standard equipment: machine - Coordinate guidance for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamping claws - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for closing the claws - Ball tables - 2 parts flaps 500 mm x 500 mm - FocusLine - Nitro Line - FastLine - Express cylinder laser parts - Cinder cone detection TRUMP Lasers - Solid-state laser TruDisk 3001 with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - Laser control TruControl 1000 - Cooling unit - Laser logbook function cutting head - Solid state laser compact cutting unit - Control Line punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / r ...

cooling capacity: 1,25 kW : 6,2 m³/min : 16 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Varidamp dampening Ink unit temperature control Full automatic plate changer (FAPC) Cooling and recirculation (Technotrans Beta.c 280G) Non-stop Delivery Perfecting 8:0/4:4 Non-stop feeder Powder exhauster Antistatic feeder Powder sprayer (Eltosch PowderMax) SIS-Sensoric Infeed System Ergotronic console (+ Wallscreen) Drivetronic SPC (Simultaneous Plate Change) Plate Ident ErgoTronic ColorControl QualiTronic ColorControl (+ Colorview) Water cooled peripherals CleanTronic Synchro - Parallel washing of rollers and blanket ErgoTronic LAB

Industrial drying oven / heating oven: Maximum operating temperature: 160°C, power: 20.6kW, double-door model, recirculating air / fresh air system, digital PID temperature controller, digital timer / process control, digital recording device / chart recorder (TE Direct), internal dimensions (W x H x D): approx. 1000mm x 1500mm x 800mm (approx. 1200l volume), external dimensions (W x H x D): approx. 1600mm x 2100mm x 1200mm, total weight: 580kg. Inspection possible by arrangement.

feed pressure: 11 bar : 7,2 m³/min Number of working hours: 33.245 h total power requirement: 37 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dowel vending machine Koch with a very good condition Incl. window tools IV 68- IV 72- IV-86 as good as new 13,000 EURO Furniture processing is possible: minimum size 30 mm The system is available for immediate delivery PS.: Technical data on request!

This KERF RUM 2500P plasma cutting machine was manufactured in 2018. It features a large cutting area of 15000mm x 2000mm and is equipped with two bridges, each with 275amp plasma. Full history from the manufacturer is available. Contact us for more information about this machine.

This 7-axis KMT Speedmaster 104260-H was manufactured in 2001. It features a spindle speed of 8,000 rpm, chuck size of 20 mm, and bar capacity of 20 mm. The machine includes two turrets, each holding 8 tools, and is compatible with steel and aluminum. Consider the opportunity to buy this KMT Speedmaster 104260-H swiss type turning machine. Contact us for more information.

This KEYENCE Agilista-3200W was manufactured in 2016. It includes Modeling Studio software, printer setup materials, side covers, and an AC power cable. Ideal for those looking to enhance their 3D printing capabilities. Contact us for more information.

This 3-axis KOVOSVIT MAS MCV 800 QUICK was manufactured in 2018. It features an X-axis travel of 800 mm, Y-axis travel of 500 mm, and Z-axis travel of 550 mm. The machine includes a robust table size of 1000 x 500 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the KOVOSVIT MAS MCV 800 QUICK vertical machining centre we have for sale. Contact us for further details.

Edgebander manufactured in 2009. This HOMAG PROFI KAR310/11/A20/S2 features a work piece return system BARBARIC. Consider the opportunity to buy this HOMAG PROFI KAR310/11/A20/S2 edgebander. Contact us for further details.

This 5-axis KERN HSPC EVO was manufactured in 2005. It features a spindle speed of 50,000 RPM, a tool magazine with 95 pieces, and a workpiece magazine with 24 pieces. The machine includes a Heidenhain iTNC530 control system and HSK 25 special holder. Note: the changer arm requires repair. If you are looking to get high-quality milling capabilities, consider the KERN HSPC EVO machine we have for sale. Contact us for more information.

This KUKA KR 16 L8 arc HW was manufactured in 2016. It features a robot range of 2015 mm and a maximum load capacity of 8 kg. Equipped with a KR C4 control unit and a FRONIUS TPS 400I welding unit from 2017. Contact us for more information.

This 3-axis KNUTH XMILL 640 was manufactured in 2015. It features a Siemens 828 control, a spindle speed of 8,000 rpm, and a BT40 spindle taper. The table size is 750 × 360 mm, and it includes an 18-tool changer. If you are looking to get high-quality milling capabilities, consider the KNUTH XMILL 640 machine we have for sale. Contact us for more information.

Manufacturer: Paal Model : Konti 275 G Year of Manufacture : 2010 Find more here - / Contact us at -

This 5-axis Breton Matrix k16 was manufactured in 2002. It features a working area of 2000 × 1600 × 800 mm with vertical spindle and a tool magazine with a 30-position capacity. The machine offers rapid traverse rates up to 40 m/min and a maximum spindle speed of 24,000 rpm. If you are looking to get high-quality milling capabilities, consider the Breton Matrix k16 machine we have for sale. Contact us for more information.

Manufacturer: Keyence Model: IM 8020 Year of Manufacture: 2023 Find more here - / Contact us at -

This 4s Kitamura Hx400ig horizontal machining centre was manufactured in 2018. It features impressive X, Y, and Z axis travels of 610 mm, a spindle speed range of 40 – 15,000 rpm, and rapid traverse speeds of 60 m/min. The machine is equipped with box ways for maximum rigidity and offers optional features such as a continuous 4th axis and automatic door opening. Consider the opportunity to buy this Kitamura Hx400ig horizontal machining centre. Contact us for further details.

Manufacturer:Keyence Model: IM6025 Year of Manufacture: 2016 Find more here - / Contact us at -

This Kent KGS 615 WMA1 surface grinding machine was manufactured in 2008. It features a robust table clamping area of 1500 x 600 mm, supporting a maximum load of 1300 kg. The machine is equipped with a powerful grinding spindle motor of 7.5 kW and a standard grinding wheel size of 355 x 50.8 x 127 mm. Consider the opportunity to buy this Kent KGS 615 WMA1 surface grinding machine. Contact us for more information about this machine.

Circular Metal Saw manufactured in 2004. This KALTENBACH SKL450NA features a saw blade diameter of 450 mm and a cutting capacity of 150 mm for round materials. With a weight of approximately 1.5 tons, it includes a loading magazine for enhanced efficiency. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH SKL450NA machine we have for sale. Contact us for further details.

General SKU201P121 LocationBarneveld MakeTAN/ Konutherm BV (NL) TypeA80 No.175/12/11 Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialMild steel Volume2850 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialMild steel Notified bodytuv Capacity2850 Ltr Vessel sizesdia. 1250mm x2200mm Dished frontscheck Manholedia.600mm Top connectionsDN25, (2x)DN50, DN150,DN20 Outlet(2x)DN100, DN50 Max. temperature330 gr.C. Information Year of construction2013 Mounted on legscheck Floorspace3,0x1,5 M Total height1,7 MPressure vesselsKonutherrmTanks > Pressure vesselsBrand > Konutherrm What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit u ...

General SKU201P051 MakeAPI Schmidt-Bretten GmbH & Co, KG TypeSIGMA K 52 SCL Year of construction2012 LocationBarneveld Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface96.3 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 (316L) Plate heat exchangerscheck Heating surface96,3 m2 Capacity245+242 Ltr Number of platens168 Connections(4x) DN100 Max. temperature110 degr.C. Information Floorspace2,7x0,6 M Total height1,7 M Weight2500 KGPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more mach ...

This Kocevar & Sons R-94-K0LQ-320/750-DD160 was manufactured in 2014. It features a rotary table with NC-controlled indexing and direct drive, motorized spindles for operations like drilling and milling, and an automatic loading/unloading system. Ideal for high-volume serial production of automotive or industrial components. For more information about this machine, please reach out to us.