132,109 used machines on RESALE, but how to find them? Machine Search
punching pressure: 45.0 t punch diameter: 22 in 15.0 mm punch diameter: 38 in 8.0 mm round bar steel: 30.0 mm square edge steel: 25.0 L-beam: 100 x 10.0 mm shear: flat material: 300 x 12.0 mm adjustment of stroke: 0 - 55 mm work height max.: 940 / 1140 mm strokes per minute: 34 punch diameter: max. 110 mm voltage: 400 V total power requirement: 4.5 kW weight: 1245 kg dimensions: 1520 x 590 x 1700 mm In good condition () New price ~ 13.000 Euro Special price upon request Features: - Robust electro-hydraulic profile steel shear - With multiple workstations: Punching station Flat steel shear Angle/profile steel shear Notching station - Continuously adjustable stroke - Very compact design - Support table at the notching and punching station - Side support surfaces - 1x freely movable foot switch - Central lubrication system - Connection cable + connector The data for this ad was cre ...
pressure: 30.0 t punching cross-cut in cmm: 30.0 in 9.0 mm stroke: ca. 35 Hub/min throat: 610 mm stroke - stepless adjustable: 0 - 28.0 mm oil volume: 35.0 l work height max.: 1010 mm total power requirement: 4.0 kW weight of the machine ca.: 1200 kg. range L-W-H: 1400 x 700 x 1600 mm good condition () with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel The data for this ad was created with ModulMWS - the softwar ...
: 4.0 mm : 3.0 mm : 30 - 120 Grad blade length: 150 x 150 mm work height max.: 900 mm table:: 1000 x 650 mm engine output: 3.0 kW weight: 850 kg range L-W-H: 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, ...
power capacity: 0,75 kW degree: 45° Grad turning speeds: 10.000 U/min milling height: 4,0 mm motor: 400 Volt range L-W-H: 560 x 300 x 450 mm weight: 44,0 kg Description : - Advantage of the sliding guide rail: the workpiece is not moved and therefore cannot be scratched - Ideally suited for deburring and chamfering (visible edges) of various - Materials e.g .: steel, aluminum, non-ferrous materials, plastics, etc. - Ideal for producing visible edges with excellent surface quality - High dead weight for vibration-free work scope of delivery - Slidable guide rail 500 mm - milling head - HM indexable inserts - Operating tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 4000 mm turning diameter: 850 mm turning dia. in gap: 1150 mm turning diameter over slide: 520 mm turning speeds: 5.0 - 630 U/min quill:: 6 MK quill travel: 250 mm spindle bore: 100 mm workpiece weight: max. 4000 kg bed width: 600 mm travel -x axis: 500 mm travel -z axis: 3700 mm rapid traverse: X 1800 mm/min rapid traverse: Z 3640 mm/min feeds: X : 0.04 - 4.8 mm/min feeds: Z : 0.08 - 9.6 mm/min feeds: Z1 : 0.02 - 2.4 mm/min engine output: 20.0 kW weight of the machine ca.: 6800 kg. dimensions: 6150 x 1500 x 1500 mm good / well-maintained condition () original price at the time approx. 65.000 euros special price on request Description: - particularly heavy, heavily ribbed and wide machine bed - in a rigid one-piece monoblock design - induction-hardened and ground guide prisms - guarantee long-term accuracy and minimal wear - solid headstock - with high-precision, taper ...
Height=1.63 m, Overall length= 1.02 m, Overall width= 0.75 m, Net weight= 505 kg,
A small tunnel oven for pizza production is available. Heating capacity: 10kW, temperature range: 120°C-300°C, conveyor time: 90s-20min, conveyor belt dimensions X/Y: 460mm/1320mm, baking area X/Y: 460mm/610mm, production capacity for 26cm pizzas: approx. 70 pieces/h, machine dimensions X/Y/Z: approx. 1450mm/1000mm/450mm, weight: approx. 170kg. An on-site inspection is possible.
Height=1.63 m, Overall length= 1.02 m, Overall width= 0.75 m, Net weight= 350 kg,
Our KVK 2A is a semi-automatic stretch wrapper with a cut-out for driving at ground level. The KVK 2A model is equipped with a pre-stretch system for 250% elongation. Thanks to the pre-stretching system, you can produce up to 3.5 metres of film on the pallet from 1 metre of film on the roll and reduce your material consumption enormously. In addition, this system creates only a minimal application tension, so that even light packaged goods are not pulled from the turntable. With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 2A has a 1500 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and foil slide, as well as a power stretch unit that can be controlled via potentiometer, you can adapt the automated winding perfectly to your product. Automatic recognition of your pallets ( ...
The KVK 600 is ideal if you are looking for a mobile solution to stretch your packaged goods. Or have packaged goods that are too large or too heavy for a pallet wrapper with a turntable. With the electric steering, the KVK 600 can be easily moved to any corner of your warehouse. Its battery is designed for 8 hours of continuous use. The KVK 600 has a power stretch system with up to 300% elongation. This significantly reduces your film consumption, because 1 meter on the roll becomes 4 meters on the pallet. In addition, this system creates only a minimum application tension, so that even light packaged goods can be wrapped well. For the KVK 600, up to 10 individual programs can also be stored, in which you can specify for each step (foot windings, windings ascent, head windings and windings descent) how fast and with what foil tension they should be executed. This allows you to sto ...
Our KVK 5 is a semi-automatic rotary arm wrapper that, compared to our turntable wrappers, has the advantage that your pallets can be placed at ground level for the wrapping process. It is equally ideal for light and unstable as well as heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity has to be observed. In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. With this pre-stretching system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. With the KVK 5, there is only a minimum application tension, so that even light packaged goods are not pulled off the pallet. Only the application and separation of the film has to be done manually with this wrapper. The machine weight of almost 1000 kg shows how solid and stable this winder is. ...
Inv. Num. : 8639 Type: TZS 1-2,5/1100-N Producer: Kovo Staněk Created: 2017 Parameters: Weight: 2500 kg
Height=1.52 m, Overall length= 3.85 m, Overall width= 0.95 m, Net weight= 600 kg,
KEK Kibbler Serial: 11818KIB Stainless, Kek Kibbler pre breaker mill, ideal for coarse grinding, mounted on stainless frame, 7.5Kw motor, 80Kg stainless hopper, variable speed, comes with wheels, 3Ph
Knapp transfer roller conveyor Toothed belt slider 90° 525-690-625 RA1890 Make: Knapp Running direction: both directions Roller width (RB): 625 mm Nominal/outer width (NB): 690 mm Length: 525 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic lifting of the transfer belt Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 525 Nominal / outside width in mm: 690 Roll width in mm: 625 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: 0,25 Überschieber Con ...
grinding diameter: 360 mm grinding length: 1000 mm centre height: 180 mm max. workpiece weight between centres: 250 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine mit sehr wenigen Betriebsstunden nach Überholung beim Karstens Fachbetrieb. Zustellsteuerung Jetter Digitalanzeige Innenschleifvorrichtung Reitstock mit Zylindrizitätsfeinverstellung Hydraulische Reitstockpinole Etc... Luftkissenschnellverstellung Schleifspindelstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 250,350,450 mm grinding length: 1500 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 5,6 x 2,0 m Overhauled with geometric KELLENBERGER protocoll. Pictures of a similar 1000mm machine. Standard with: -New electric cabinet -New motor for the workpiecespindlehead -2-axis DRO Fotos of a delivered (1000U) machine with following optiones against extra ch ...
Technical Data – Heraeus UT 20 1. Basic data • Model: UT 20 (convection drying oven, Function Line) • Usable volume: 210 litres • External dimensions (W × D × H): approx. 754 × 910 × 720 mm • Internal dimensions (W × D × H): approx. 610 × 672 × 514 mm 2. Temperature range • Working temperature: ambient temperature +20 °C to max. 250 °C 3. Temperature constancy according to DIN 12880 • Deviation at 150 °C (spatial): ± 3 K • Deviation at 150 °C (temporary): ± 0.3 K 4. Electrical data • Power supply: 230 V, 50/60 Hz • Rated power: 2320 W (2.32 kW) • Weight: approx. 100 kg 5. Equipment and construction • Standard: 2 shelves, expandable up to 16 • Stainless steel interior, easy to clean (removable straps, rounded corners) • Circulating air system for even temperature distribution • Microprocessor temperature control (optional: P v ...
Width 72 cm Year of construction 1992 Pallet feeder with suction head 4 fold pockets in the parallel fold section 2 folding swords in the crossfold section 1 more fold pocket after the 1st cross break Noise Insulation Hood Downstream knife shaft Shed display Delivery date: immediately from stock Price on request. We supply and install worldwide.
grinding diameter: 400 mm grinding length: 1000 mm centre height: 200 mm control: Fanuc 0i-F workpiece weight: 100 kg travel -z axis: 1150 mm measuring system resolution capability: 0,0001 mm rapid traverse: 20 m/min travel -x axis: 365 mm rapid traverse: 20 m/min grinding wheel size: 500 x 80 mm b-axis indexing accuracy +/-: 1 ° spindle motor: 7,5 kW workpiece turning speeds: 1 - 100 U/min grinding head swivelling: 240 Grad tail stock: taper in tailstock MT: 4 tailstock quill stroke: 49 mm total power requirement: - kW weight of the machine ca.: 4,1 t dimensions of the machine ca.: 3,4 x 2,2 m 3-axis cylindrical grinding machine equipped with: - CNC control Fanuc 0iF - B-axis - Coolant belt filter system - Tail stock - UR grinding head for internal, external and surface grinding The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1020 mm plate thickness: 1,5 mm daylight opening: max. 85 mm weight of the machine ca.: 240 kg dimensions of the machine ca.: m Smallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness s Lowering capability of the lower and bending beams 20 mm On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring. The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned. The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)! The data for this ad was created with ModulMWS - the s ...
Our KVK 3 is a semi-automatic stretch wrapper with turntable, which is equipped with a pre-stretch system for 250% elongation compared to the KVK 2 (MA). Thanks to the pre-stretching system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. In addition, this system creates only a minimal application tension, so that even light packaged goods are not pulled from the turntable. Only the application and separation of the film has to be done manually with this wrapper. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 3 has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and foil slide, as well as a power stretch unit that can be controlled via potentiometer, you can adapt the automated winding perfectly to your ...
3-deck swashscreen in stainless steel design (polished surfaces) with a screening area of 2.60 m² per deck, drive 4.0 kW via V-belts, equipped with sight glasses for screening material observation. Including 3 screen inserts (various mesh sizes available); Ball knocking devices and balls are available for an extra charge.
CONTROLS PLC SIEMENS S7 OVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 260 mm sheet thickness max.: 6.5 mm coil weight max.: 3 to feed velocity max.: 20 m/min feedstock transport direction: right to left COIL CHAIR coil weight max.: 3 to DECOILER design: single reel, traversable sheet width max.: 260 mm coil weight max.: 3 to mandrel expansion range from: 460 mm mandrel expansion range up to: 530 mm LEVELLER UNIT sheet thickness max.: 6.5 mm material cross section max. (450 N/mm2): 1500 mm² number of leveller rolls: 21 diameter of leveller rolls: 50 mm loop controls: yes decoiler KOHLER, type 3000.1 with coil-chairstraightening machine KOHLER, type KRM 50.260/2 transfer bridge 6970 mm, hydraulic operated
x-travel: 400 mm y-travel: 300 mm z-travel: 400 mm spindle taper ISO: 40 spindle turning speed range: 40 - 2.000 U/min table-size: 750 x 320 mm feeds -stepless-: 10 - 380 mm/min rapid traverse: 1.200 mm/min power capacity: 2,2 kW quill stroke: 80 mm coolant: voltage: 400 V total power requirement: 4,7 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,15 x 1,40 x 1,85 m - Serial-No.: 148373 - 3-axis digital display - Horizontal milling device - Milling head swivels ±45° - Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 430 mm saw band length: 6830 mm cutting range: 430 x 430 mm control: Siemens Simatic HMI cutting speed: 80 m/min height of material-table: 700 mm dimensions of the machine ca.: 5,36 x 6,83 x 2,41 m total power requirement: 25 kW weight of the machine ca.: 4920 kg Equipment/accessories: - Infinitely variable cutting feed rate - Pump capacity 75 l/min - Roller conveyor - Chip conveyor - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 320 mm saw band length: 6300 mm cutting range: 420 x 320 mm control: Siemens Simatic HMI cutting speed: 20 - 130 m/min height of material-table: 950 mm total power requirement: 15 kW weight of the machine ca.: 2920 kg dimensions of the machine ca.: 6,35 x 6,76 x 2,41 m Machine overhauled by Kasto in 2016 Equipment/accessories: - Cutting feed continuously adjustable - Pneumatic connection 6 bar - Coolant 75 l - Pump capacity 40 l - Roller conveyor - Chip conveyor - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Our KVK 3 Slim Line is a semi-automatic stretch wrapper with turntable. It is equipped with a pre-stretch system for 250% elongation. Thanks to the pre-stretching system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. In addition, this system creates only a minimal application tension, so that even light packaged goods are not pulled from the turntable. With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 3 Slim Line has a 1500 mm turntable and can wrap pallets up to 2250 mm high as standard. With adjustable speeds of the turntable and foil slide, as well as a power stretch unit that can be controlled via potentiometer, you can adapt the automated winding perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter ...
Type: PR400 Serial number: 134 Belt width: 400 mm Power: 3 x 380V, 50Hz, 0.9kW Dimensions: 2050 x 650 x 2050 mm Weight: 185 kg
Type: 750 Serial number: 13909 Year of construction: 2005 Mixer: double shaft paddle mixer Capacity: 2000 liter, up to 1000 kg Speeds: 15 / 30 RPM Infeed height: 2200 mm Outfeed height: 800 mm Vacuumpump: liquid ring SIHI LEMB 161 Water: 800 liter/hr Air pressure: 6 Bar Power: 3 x 400V, 50Hz, 13kW Dimensions: 2800 x 2300 x 2400 mm Weight: 2500 kg
740 x 1,050 mm max. / 330 x 480 min. Size MABEG Scale Layer Flatbed die-cutter Punching force 1.8 MN / approx. 182 t HFS Hot Foil System Feeder stack 115 cm Display stack 85 cm Total meter approx. 12 million
used
1 of used high-seeed film-only shrinkwrapper / multipacker, make KHS/Kisters, type Innopack SP A-H, new 2013. Operating side: left. Used for beverage cans diameter 66 and 58 mm in various collations. Siemens S7 PLC with MI-servo controls. Gas-fired shrinktunnel (can be converted to electrical).
used
1 of used high-seeed film-only shrinkwrapper / multipacker, make KHS/Kisters, type Innopack SP A-H, new 2013. Operating side: right. Used for beverage cans diameter 66 and 58 mm in various collations. Siemens S7 PLC with MI-servo controls. Gas-fired shrinktunnel (can be converted to electrical).
1 of used medium-speed film-only shrinkwrapper / multipacker, make KHS/Kisters, type Innopack SP A-M, new 2013. Operating side: left. Used for 500 ml PET bottles in various collations at a maximum speed of 70 cycles per minute (depending on format). Siemens S7 PLC with MI-servo controls. Electrically heated shrinktunnel.
Rafamet KCFB-320 Vertical Boring Mill 125.98” Table Diameter, 137.79” Max. Turning Diameter, (2) Swiveling Ram Heads, 39.4” Ram Stroke, +/- 30 Degrees Ram Swivel, 98.4” Height Under Rail, 0.8-40 RPM Table Speeds, 55,000 Lbs. Table Capacity, Pendant Controls, 2-Axis Quadra Check Digital Readouts, Side Head, Threading & Taper Turning, 75 HP Table Motor, S/N 126240
Rafamet KCFB-320 Vertical Boring Mill 125.98” Table Diameter, 137.79” Max. Turning Diameter, (2) Swiveling Ram Heads, 39.4” Ram Stroke, +/- 30 Degrees Ram Swivel, 98.4” Height Under Rail, 0.8-40 RPM Table Speeds, 55,000 Lbs. Table Capacity, Pendant Controls, 2-Axis Quadra Check Digital Readouts, Side Head, Threading & Taper Turning, 75 HP Table Motor, S/N 126240
Max. load capacity: 2t, tilting angle: 180°, voltage: 400V, connected load: 4.25kW, compressed air connection: 6bar, CE marking: available. Tilting mechanism: chain-driven with large drive sprocket, hydraulically assisted for safe and controlled tilting process, designed for complete turning of containers (180°). Receiving container: yellow container, specially secured with retaining brackets and locks. Operation: electrically controlled with safety interlock. With documentation. An on-site inspection is possible.
approx. 221 pieces corlettes / multi-box, width 2m/ 2.50m / 2.70m, partly stackable - used - : Prices (net) per piece from location: 149.-€ Price (net) Type 3 – stackable: 169.-€, per piece ex location! Manufacturer: Cordes und Koch Type: Corlette / Multi Box Dimensions (L × W × H in cm) Type 1 = 13 pieces (complete sale only) 250 x 115 x 180 Color: Blue Type 2 = 2 pieces 270 x 115 x 240 Colour: green Type 3 = 192 pieces, of which approx. 62 pieces can be stacked Minimum order: 10 pieces 200 x 115 x 180 Colour: blue Type 4 = 14 pieces (complete sale only) 270 x 115 x 188 Colour: green Condition: good Available: immediately Location: 63128 Dietzenbach
Injection moulding machine Krauss Maffei KM 50/90 C2 BJ 2001
Inspektor Linatronic along with contour detecion module: • Type: Krones Linatronic K735 • Manufacture year: 2012 • Capacity: max. 60 000 bottles/h. • Direction of operation: from left to right Possible detection: • Residual liquid (infrared) • Double check of residual sodium (high frequency) • Inspection of neck damage • Side wall control modules - 4 modules • Rejection of damaged bottles • Separate rejection of dirty bottles • Bottle contour detection • Bottle color detection • Separate rejection of bottle with wrong contour or color The Inspection unit contains the conveyor which separates bottles before the entry to the Inspector and the Ejector table after. Total lenght of the Unit: 11300 mm
- Range off edge radius Manual 20 - 500 - Range off edge radius Automatic 150 - 500 - Hydraulic Controllable forming roll drive - Hydraulic displacement drive - Clamping device without hole - Max. pressure manipulator 2000 Psi / 140 bar - Max. pressure press 5700 Psi / 400 bar - Max. speed forming roll 170 M/Min - Basket bottem - Knocker bottom - Pressure vessel bottom - Boiler bottoms - Flat floor - Plate base - diffuser bottom - Tank bottom - Tank bottom - Radar reflectors - Engine parts - Dispense air - Silo hoppers - Cooker hoods - Container parts - Hemispheres
x-travel: 450 mm y-travel: 200 mm z-travel: 465 mm total power requirement: 2,6 kW weight of the machine ca.: 1.2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Knorr Stacker SL - 3, working surface 75x105cm, paper height sensor, year of construction 1998, machine number 6852139, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment
Height=1.67 m, Overall length= 3.65 m, Overall width= 0.96 m, Net weight= 365 kg,
Manufacturer: KKK Model: AFA4 / AFA6 TWIN Year of Manufacture: 1997 Output Power: 1822 kW (maximum) Inlet Steam Pressure: 22.9 bar (minimum), 25.5 bar (normal), 28.1 bar (maximum) Outlet Steam Pressure: -0.5 bar (normal), 0.2 bar (maximum) Inlet Steam Temperature: 355 °C (minimum), 405 °C (normal), 415 °C (maximum) Outlet Steam Temperature: 275 °C (maximum) Generator Specifications: Brand: AEM Generator Type: SE 500 M4 Power: 2203 KVA (400 V, 3180 A, 50 Hz) Find more here - / Contact us at -
Manufacturer: KKK Model: CF 5 G Year of Manufacture: 1986 Output Power: 412 kW Inlet Steam Pressure: 19 bar (Normal) Outlet Steam Pressure: 3 bar (Normal) Inlet Steam Temperature: 300°C (Normal) Alternator Features: Brand: AVK Alternator Type: DKBN80/500-4TS Power: 482 KVA (400 V, 696 A, 50 Hz) Year of Manufacture: 1986
- Spindle speed 10.000 Rpm - Coolant tank with IKZ 20 bar - Chip conveyor
Kodak Trndsetter Q800 with developer year 2016. Model TJ1903 developer EL125T In production X speed, 42 plates per hour software
maximum number of results exceeded
please refine your search
