70 k used for sale

SPECIFICATIONS: Working width: 420 mm Feed speed: 6 m/min Voltage: 230 V

Specifications Maximum pressure: 75 tons Year of Make: 1999 Press force: 90.9 t/m² Number of bindings: 4 vertical Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1550 mm Bale weight: 500-750 kg Weight: approx. 25 tons Power connection: 400 V Bale tying: automatic Motor: 75 kW (possibility of switching to 55 or 45 kW) Press capacity at idle: max 750 m³ / hour Press capacity under operating conditions: max 350 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 12 tons/hour Theoretical throughput to density 60 kg/m3: approx. 21 tons/hour Theoretical throughput to density 100 kg/m3: approx. 33 tons/hour Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Cho ...

Düperthal Safety Cabinet Type 90 W x D x H 120 x 60 x 206 cm Price incl. VAT You will receive an invoice with VAT. Shipping possible !

Knapp roller conveyor accumulation roller conveyor 2690-710-650 RA1952 Brand: Knapp Running direction: both directions Roller width (RB): 650 mm Nominal/outer width (NB): 710 mm length: 2690 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: belt, not included Stowage spaces without drive: 5 Frame height: 90 mm Conveyor speed: motor station dependent, please contact us for details Scope of delivery: without supports, without side guide, without drive station, with light barriers and accumulation mechanism Optionally available: Supports Side guide on one side and on both sides Motor station Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: very good (used) scope of delivery: without supports and side guides Nominal / outside width in mm: 710 nominal voltage: 24V Roll division in mm: 90 Stowage spaces: 5 Stauplätze ...

Combined cooling system Year of manufacture 2021 If you have any questions, write

Microcutter FD 112 Karl Schnell Stainless steel Dimensions: 1150x1200x1700mm Voltage: 400V / 50Hz / 3N Up to 3500kg/h Electric power: 51kW

Fully Automatic Slicer Packaging Line Cutting / Depositing / Packaging KUCHLER S.A.M. P2 Specifications: Slicer type: SAM P310 f v Type Foil Dispenser: SAM KP 21 Airless Type Packer: SAM IL - 4 - 220 Airless Type Labeler: Mettler Toledo UC-GTT-M 400 Volt / 50 Hz / 3.79 A Year of Make: 2014 Foil size: 21 x 26 & 21 x 21 cm several layers on top of each other can be welded Output up to 150 parcels per hour Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife, Teflon-coated New price in this version approx. EUR 55,000 Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.

(showroom machine) Main Technical Data Number of Spindles: 4 spindles Gundrilling Diameter Range: 4 - 20mm Working Method of Tool: Rotating Working Method of workpiece: Rotating Clamping Method: Clamping Cone Max. Drilling Depth: 800mm Workpiece Max.Outer Diameter: 300mm Drilling Feedrate: 1-180mm/min Spindle Center Height: 220mm Spindle Distance: 158.75mm Control System: SIEMENS 828Dsl A.C. Spindle Motor Power: 2×15 kW Spindle Speed (Infinitely Variable): Max.5000 RPM Tailstock Spindle Speed: 70rpm Rapid Traverse Speed: 6000mm/min High Pressure Pump Motor Power: 4×7.5 kW Coolant Flow Rate: 4×46 L/min Filter accuracy: 20µm Max.Coolant Pressure: 100 bar Oil Tank: 1200L Weight of Machine: 10000 Kg. Electrical Supply:  ...

Clamping force: 1250 kN Ø worm: 35 mm Column spacing: 470 mm Injection weight: 142g Min. mould height: 300 mm Total weight: approx. 6,000kg

Efficient filling line for beer and non-alcoholic beverages Manufacturer: Krones Model: Krones Block – Mecafill – Starmatic Capacity: up to 30,000 bottles per hour This used Krones machine is ideally suited for breweries and beverage producers looking for a reliable and high-performance filling line for beer and soft drinks. Filler – Mecafill • Products: Beer, soft drinks (e.g. soda, water, soft drinks) • Closures: Crown cap (KK) & screw cap (SV) • Running Direction: Left to Right (clockwise) Labeling Machine – Starmatic • 2 labeling units for: o Front label o Chest label o Back label Availability: Available from February 2026 Technical highlights: • Robust construction "Made in Germany" • Ideal for medium to large productions • Proven Krones quality – reliable and easy to maintain

Code: 0134 Brand: BRANDT - GERMANY Model: KTD 53 Automatic edge bander for wood, pvc, veneer, furniture, custom furniture, joinery and various Technical data: Min/max panel height mm 10/40 Edge thickness min/max 0,4 - 1,5 mm Feed speed 7 mt/min on motorized roller conveyor Min panel width mm 65 Composition: Gluing unit Cutting shear unit End cutting unit Upper/lower trimming unit Wheels on base for easy handling Volt 380/50 Total power Kw 4,5 Compressed air 6 bar Overall dimensions mm 1800 x 615 x 1170 h Weight kg 280

Key data: 2580 mm, 150 mm

BOERE KSM 1 Edge Grinding Machine Brand: BOERE Type: KSM-1 M-No.: Year of Make: 2006 Data: Length of work tables: 900mm Width of work tables: 400mm Table level: Height adjustable Dimensions: 1,7007501,250mm Scjhleifa unit inclination: 0-60° Abrasive belt: 2580150mm Grinding spindle: ø mm Main drive: 2.2 KW Oscillatation sanding belt: 0 - 25 mm - 0.37 KW Weight: 260 KG Press: 6 bar

Vacuum pump Becker Rotary Vane Vacuum Pump Type KVT 3.100 Item no. B.153231g Built in 1999 Motor 3.0/3.6 kW Speed 1420 / 1700 rpm Pumping speed 100/120 m³/h Suction pressure/vacuum -900 mbar Dimensions 1000 mm x 450 mm x H 500 mm Shipping Dimensions 1200 mm x 800 mm x H 700 mm Weight with pallet 120 kg

Offer 25979 Operating hours 16550 h - Operating pressure 10 bar - Delivery rate 15.9 l/sec - Drive 400 V / 7.5 kW - Motor speed 3000 rpm - Air tank 250 L - Space requirement approx. W 700 x H 1830 x D 1050 mm - Weight approx. 250 kg

A total of seven circular metal saws from Kaltenbach and Adige are available. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. On-site inspection is possible.

Used semi-automatic tablet/capsule counter, produkcji firmy Kwang Dah z Tajwanu, model KDC-101. New: 2012 Capsules or tablets are counted in the machine by a sensor measuring the filling of the bottles. The sensor ensures accurate counting and dosing of tablets, lozenges, pills or transparent capsules. The machine is equipped with a compensator and a sensor that provides automatic adjustment according to the collected powder in the sensor window. Power supply: AC 110V/230V, 50Hz, single-phase, 5A Machine weight: 70kg Machine dimensions: 88 x 76 x 70 cm（length x width x height）

An unused Kemper extraction system for room ventilation in the production area is available. Filter class: H10, Filter method: Storage filter, Filter material: Nano-Cellulose, Separation efficiency: 99.9%, Dust class: M, Volume flow: 5000m³/h, Motor power: 3.35kW, Filter area: 50m². Machine diameter: approx. 1200mm, machine height: approx. 2700mm, weight: approx. 420kg, operating hours: 1h. Documentation available. On-site inspection is possible.

max. wheel diameter: 5500 mm gear width: 1500 mm max. module: 32 faceplate diameter: 3740 mm swing diameter: 6200 mm turning height: 1200 mm control: FANUC 31i MODEL B : 1250 mm cross rail - adjustment: 3000 mm turning speeds: 3-15 U/min spindle turning speed - stepless: 15 - 1500 U/min workpiece weight: 39,4 t max. dia. of teeth cutting: 5500 mm tooth width: 550 mm module: 32 cutter speeds: 10 -150 U/min milling cutter dia. x width: 450 x 110 mm milling head axial adjustable: 2060 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m Complex TurnMill & Gear Cutting Machine - CNC control FANUC 31i B - Turning and Milling Function - ATC - Angular Milling Head - Gear Hobbing (internal and external) - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data according to the nameplate: Manufacturer: EMK / Sondermeier Elektromotoren Handels GmbH Type: KHL1G315M-4B3E3KR Engine Number: 71500846002 Power: 132 kW Voltage: 400 V (delta Δ) Current consumption: 241 A Frequency: 50 Hz Speed: 1435 rpm Design: B3 (foot mounting) Degree of protection: IP55 Insulation class: F COS φ: 0.89 Date of manufacture: 08/2022 Place of manufacture: Rain / Germany

Edge banding machine Type: KDF 660 Manufacturer: Brandt Year: 2014 Touch screen, servo motor adjustment Automatic lubrication of the feed belt 2x Dia preload height 60 mm Glue application with aggregate + tank, second aggregate possibility of gluing Eva/Pur, third aggregate Airtec hot air edging Cutting with saws Milling aggregate for plane and with R1 Split milling R2 and corners Grooving aggregate (half groove, groove, also for impact handles) 4x radius filter R1/R2 flat filter brushing brushes sprayers +Accessories Machine in good condition, under power Find more here - / Contact us at -

Pressure press Korrex Berlin No. 1, working width 50 x 65 cm, machine number 4061, in good condition, immediately available We have several pressure presses in stock from different manufacturers. If you are interested, we will also be happy to inform you about other machines in our company. Iajbr Sbovrcxne Ta Eju You are welcome to visit the machine in our house by prior appointment.

measuring range X-axis: 330 mm measuring range Y-axis: 400 mm spindle taper: SK 40/50 dimensions of the machine ca.: 1080 x 660 x 1080 mmxmmxmm weight: 175 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tränklein banding machine ZW-D 500, with cardboard device, machine number 2967, year of construction 1986, machine is in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. Iobr Sbsvvirij Ta Ejau You are welcome to visit the machine in our house by prior appointment.

HF welding machine with sliding table - 1.1 KW

Tränklein double corner round machine, machine is in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. Isbovvi Epjr Sb Ta Esau You are welcome to visit the machine in our house by prior appointment.

Kiefel Roller Sheeter

KUKA robot for fully automatic crate handling Palletizing plastic crates, cardboard boxes or containers with different surfaces and weights. Palletizes up to 300 crates per hour, ideal for high production volumes. Safe crate handle: The clamping gripper adapts flexibly to different crate formats and ensures stable and damage-free transport.

Fully automatic timber feed with feed roller conveyor Extension of the feed cross conveyor and feed roller conveyor for timber lengths up to 13 m Feed and feed cross conveyors Under-table swivel cross-cut saw Universal milling unit 4-axis (UF4) Combined support for vertical tools Drilling rig 2.2 kW Combined support for horizontally working tools Drilling rig 2.2 kW Longitudinal and transverse groove milling machine Rear marking device (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Electronic control with EKP software Roller conveyor for timber conveying incl. extension (without drive) Component ejectors Wooden shelf 5-arm Safety devices and enclosures

14 used pistons for WP Multimatic# 4 are originally packaged Unit price

Manufacturer: Kettner Type of Machine: Fully automatic bottle pallet remover Find more here - / Contact us at -

An old rectangular ball mill for barrel and dip finishing of mass-produced articles is available. Process: Deslagging/deburring, filling weight range: approx. 30kg-50kg, drive: belt-driven, machine length: approx. 1200mm. On-site inspection is possible.

cutting diameter: 15 - 560 mm : 560 x 630 mm dimensions of saw-band: 7.400 x 54 x 1,60 mm Control: KASTO material feed - single: 900 mm multiple feeding length: max. 9.999 mm cutting length min.: 6,00 mm sawing motor: 5,50 kW cutting speed: 13 - 127 m/min height of material-table: 700 mm total power requirement: 12,00 kW weight of the machine ca.: 6,00 t dimensions of the machine ca.: 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control, frequency-controlled saw band drive, chip conveyor, infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m, Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 275 mm max. module: 6 min. module: 1,5 Control: SINUMERIK 840 C tooth width: 5,5 mm spiral angle: min. 0 / max. 60 ° max. number of teeth: 120 min. number of teeth: 5 ratio of transmission: 1:10 min. ratio of transmission: 1:1 work piece spindle speed: max. 110 U/min blade head turning speeds: 20 - 110 U/min total power requirement: 100 kW weight of the machine ca.: 16,7 t dimensions of the machine ca.: 5,20 x 2,30 x 2,40 m Internal deburring device U axis / Q spindle chip conveyor coolant device Electrostatic air purifier ELBARON no tools No workpiece clamping device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Krones Air Conveyor diverter from 1 to 2 for PET air transport

Manufacturer: Klaaßen Model: SDM15-5 Year of Manufacture: 2019 Type of Machine : Turning Machining Center - Turning Diameter: 1,500 mm - Center Distance: 4,500 mm Key Features: - 4-guideway bed machine - High-performance spindle box with backlash-free C-axis - Full-featured 3-axis milling (Y-axis travel = 340 mm) - Direct measuring system in each CNC axis - Infinitely adjustable motor milling spindle - Klaaßen motor milling spindle: 37 kW / 4000 rpm / 330 Nm (S1) - Automatic tool changer for turning and milling tools - Steady rests and tailstock fully traversable - Internal milling heads - Grinding support - Extensive accessories available Find more here - / Contact us at -

PART NUMBER: 7679 SPECIFICATIONS - max planing width 610mm - max planing height on both sides 200mm - electric top, up/down adjustment - max planing height on four sides 100mm –in advance: - Pulling insertion shaft, toothed - Flingers -Pressure - 2 pulling shafts, toothed -Pressure - planer shaft 610mm, 4-knife 7.5kW -Pressure - pulling shaft, smooth, outfeed – from below: - guide strip - pulling roller, toothed - planer shaft 610mm, 4-knife 5.5kW - 2 smooth, pulling shafts –behind: - 2 side spindles + clamp 1) Vertical right 100mm 4kW 2) Vertical left 100mm 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - Manual planing width setting - 6 types of feed speeds: 7/9/11.5/14/18/23m/min - feed motor 3.1kW - dimensions length/width/height 2500x1800x600mm - weight about 3000kg ADVANTAGES – ideal for processin ...

Part Number 7668 SPECIFICATIONS - Track width 250mm - shaft width 450mm - max blade diameter for multi-rip blade 350mm - max blade diameter for the edger 350mm - blade bore diameter 80mm - max cutting height for multi-rip saw 120mm - max cutting height for the edger 100mm - table top width with clearance 900mm - table top length 1770mm -in advance: - Flingers - roller, pressure, slip, metal, smooth - Flingers - pressure roller, slip roller - shaft with saws - pressure roller, slip, metal 2 pcs - from below: - guide strip - Flingers -caterpillar - central lubrication - Infinitely variable feed speed - feed motor 1.1kW - main motor 22kW - total dimensions length/width/height 2200x1600x1800mm – weight 1900kg – made in Germany – roller with a floating disc for edging – used multirip saw, very good condition Net price: 54900 PLN Net pric ...

Part Number 7670 SPECIFICATIONS - Track width 340mm - shaft width 400mm - max blade diameter for multi-rip blade 350mm - blade bore diameter 80mm - max cutting height for the edger 100mm - max cutting height for multi-rip saw 120mm - table top width with clearance 900mm - table top length 1780mm -in advance: - Flingers - roller, pressure, slip, metal, - Flingers - pressure roller, slip roller - shaft with saws - pressure roller, slip roller - metal slip shaft, pressure shaft - from below: - guide strip - Flingers -caterpillar - central lubrication - Infinitely variable feed speed - electric shaft lifting with saws 0.75kW + body 1.1kW - feed motor 1.5kW - main motor 22kW - floating saw travel 0.55kW - lasers (not working, to be reviewed) - extraction spigot diameter 210mm - total dimensions length/width/height 2200x1450x2000mm - weight  ...

Manufacturer: Kraintek Model: HX360-W2/OT/LT+VT1/800x1150x850 Year of Manufacture: 2020 Commissioned on 01.11.2020, and was decommissioned in 2022 Technical Specifications: - Overall Dimensions: - Length: 8277 mm - Width: 11,640 mm - Height: 3450 mm - Machine Weight: 15,000 kg - Basket (container) Dimensions: - External: 470 × 850 × 310 mm - Max Load Capacity: 70 kg - Electrical Requirements: - Power Supply: 3-phase + PE, 50 Hz, 400/230 V, TN-S - Max Power Input: 260 kW - Operating Power: 171 kW - Control Voltage: 24 V - Distribution Box Protection: IP55 - Air Pressure Requirement: 0.4 – 0.6 MPa - Steam Extraction: Connect to central exhaust line - Safety Standards: - STN EN 60204-1: 2007-06 - ČSN EN 60204-1 ed.2 Find more here - / Contact us at -

Manufacturer: Kraintek Model: HX360-W3/LT1+VT1/800x1150x650 Year of Manufacture: 2020 Commissioned on 01.11.2020, and was decommissioned in 2022. Technical Specifications: - Overall Dimensions of the Machine: - Length: 8277 mm - Width: 11,640 mm - Height: 3450 mm - Machine Weight: 15,000 kg - Basket Dimensions: 470 × 850 × 310 mm - Maximum Basket Load: 70 kg - Electrical Data: - Power Supply: 3~N+PE, 50 Hz, 400/230 V, TN-S - Maximum Power Consumption: 260 kW - Control Voltage: 24 V - Current: 396 A - Protection (Electrical Cabinet): IP55 - Compressed Air Connection: 0.4 – 0.6 MPa - Steam Exhaust: Connect to central steam exhaust system - Compliance Standards: - STN EN 60204-1: 2007-06 - ČSN EN 60204-1 ed.2 Find more here - / Contact us at -

Working widths: 4600 mm Roller width: 4800 mm Number of rollers: 2 x S-Walze Stück Swimming roll - dia: 350 mm Roller covering - soft rubber: 75 Grad shore Pressure line: 50 N / mm Pressure total: 24 to Liquor trough with guide roll: Capacity of dye tub: ca.130 Liter Cloth guiding system for woven goods: geb. Breithalter vor Fuge Hydraulic unit for separately pressure: Drive shaft: ohne Antrieb • Dyeing padder with two Swimming Rolls, horizontally arranged, • with liquor trough with guide roll and displacer, • Machine will be completely overhauled before delivery. We supply with guarantee. (Photo shows a similar machine after overhauling) • New drive can be designed according to case of operation, • extra charges: EUR 10,000.00 to 12,000.00 • Guarantee period: 6 months The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working widths: 4200 mm Roller width: 4400 mm Number of rollers: 2 x S-Walze Stück Swimming roll - dia: 350 mm Roller covering - soft rubber: 75 Grad shore Pressure line: 50 N / mm Pressure total: 22 to Liquor trough with guide roll: Capacity of dye tub: ca.130 Liter Cloth guiding system for woven goods: geb. Breithalter vor Fuge Hydraulic unit for separately pressure: Drive shaft: ohne Antrieb • Dyeing padder with two Swimming Rolls, horizontally arranged, • with liquor trough with guide roll and displacer, • Machine will be completely new. We supply with guarantee. (Photo shows a similar machine after delivery) • New drive can be designed according to case of operation, • extra charges: EUR 22.000 • Guarantee period: 7 months The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1020 mm y-travel: 520 mm z-travel: 550 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Sinumerik 828D 24-fold automatic tool changer chip conveyor coolant through spindle device measuring feeler Technische Daten / technical details: Verfahrweg X / X-Travel 1020 mm Verfahrweg Y / Y-Travel 520 mm Verfahrweg Z / Z-Travel 550 mm Tischgröße / table size 1100x500 mm Drehzahlbereich / spindle speed 10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in changer 24 fach Antriebsleistung Spindel / drive capacity spindle 9/22 kW Gewicht der Maschine ca. / weight 5500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

Welding current at 25% ED max.: 250 A Welding current at 100% ED: 110 A Welding current step-by-step. Adjustable: 5 - 250 A electr. Connection: 380 V Space requirement: 650 x 600 x 1100/1500 mm high Weight: 55 kg

Milling axes, dividers, grinding wheels, High: 1765 mm, Tall: 1765 mm, Weight: 2500 Kg, Width: 1100 mm, Long: 2570 mm, Ø tool: 250 mm, Total power: 7.5 kva., Ø of the grinding wheel: 250 mm, Travel of table: 400 mm, Height of points: 125 mm, Height of centers: 125 mm, Max. Ø to be sharpened: 250 mm, Power wheel motor: 3 Kv., Manufacturing number: 1905.04, Ø max to sharpen: 250 mm, Grinding wheel motor power: 3 Kv., Distance between points: 635 mm, Table tour: 400 mm, Revolutions of the wheel: 1750/2150/2850 mm, Length between points: 635 mm, Maximum length to sharpen: 400 mm, Revolutions of the grinding wheel: 1750 / 2150 / 2850 mm, Radial travel axis wheelhead: +35 / -65 mm, Maximum length to be sharpened: 400 mm, Vertical travel of the wheel: 175 mm, Vertical travel of the grinding wheel: 175 mm, Radial travel of the grinding wheel shaft: +35 / -65 mm, Cone holder shaft clamping pi ...

Optical 3D coordinate measuring machine consisting of control unit VL-350, measuring head VL-370 and base VL-360. The meter was rarely used and is in very good condition., software: Version 1.3.0.235

Kallfass tilthoist with transport belt

cutting diameter: 520 mm saw band length: 7239 mm cutting width: 1,3 mm Control: POSIMOD cutting range - square -: 520 x 520 mm feed length: 500 mm feed length: multiple: 4500 mm min. cut-off length: 6 mm length of rest piece min/max: 10 / 100 mm cutting speed: 20 - 130 m/min dimensions of saw-band: 7239 x 50 x 1,3 mm sawing motor: 5,5 kW total power requirement: 10,0 kW weight of the machine ca.: 3,8 t dimensions of machine L x W x H: 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.