132,802 used machines on RESALE, but how to find them? Machine Search
A Memmert universal oven and a Binder climate chamber are available. 1) Memmert UM 500, temperature range: 30°C-200°C, volume: 108l, internal dimensions X/Y/Z: 560mm/480mm/400mm, external dimensions X/Y/Z: 710mm/760mm/550mm. 2) Binder KBF 240, temperature range: 0°C-100°C, volume: 240l, output: 2.2kW, max. operating pressure: 15bar, refrigerant: R134a, internal dimensions X/Y/Z: 800mm/600mm/500mm, external dimensions X/Y/Z: approx. 1050mm/1150mm/750mm. Documentation available. On-site inspection is possible.
A complete material conveyor system for plastic granulate is available. Components: Control system for 10 end devices, side channel compactor with filter and six color dosing devices for direct coloring, six material conveying pots. On-site inspection is possible.
A Kuttler automatic handling machine that moves workpieces or material blanks on a production line is available. Infeed height: 1050mm, outfeed height: 900mm, cutting and turning range: 90°, workpiece lowering: 150mm, machine dimensions X/Y/Z: approx. 14500mm/1000mm/2100mm, weight: approx. 750kg. Documentation available. On-site inspection is possible.
roll diameter: 800 mm throat: 765 mm workpiece height: ? mm total power requirement: ? kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 2 x 1 x 2,6 m No. 1548 Vertical band saw KÖLLE BG-80 Working area: Table, tiltable 1200 x 800 Passage saw blade machine stand 765 mm IDEAL saw blade welding and grinding device Roller diameter 800 mm. Space requirement approx. 2 x 1 x 2.6 m Weight approx. 900 kgm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: - mm stroke: 8 - 116 mm total power requirement: 8 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: ca. 2,5 x 2,5 x 3,5 m No. 0778 Single-column eccentric press 1000 kN Stroke adjustment 8-116 mm, stroke rate 65/min, ram adjustment 80mm, Space requirement2.1x 1.7 x 3.1 m, Weight approx. 7500 kg Stand tiltable, 10°/20°/30° Working area: table 800 x 560 Drive: 8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working area L-W-H: 10001150850 mm manual operated rotary table: Ø accessories and equipment:: Absaugung Number of working hours: 600 h voltage: 400 V total power requirement: 0,4 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 222,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diamter spiral cutter: 70 - 250 mm spiral lenght: 20.000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bearing diameter: Ø 380 - 1030 mm weight max. in kg: 1400 kg Dimensions (L/W/H): 3000 3000 mm weight: 1500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 200 - 280 mm band length: 400 - 500 mm stroke: - mm total power requirement: 2 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3 LM m Package 5 x hacksaw / hacksaw machine / untested - partly in need of repair / spare parts carrier - 0278: RUCOCO RBS 280 A / Ø 280mm - automatic machine - 0664: SILISTRA HN 25 M / Ø 250 mm / saw blade 500 mm - 2395: BEHRINGER Super A-275 / Ø 275 / saw blade 450 mm / automatic machine - 3674: BEHRINGER Super 215 PU 2 / Ø 215 / saw blade 400 mm - 5708: KLAEGER / Ø approx. 210 / saw blade 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length in total: 3850 mm band width: 280 mm conveying height: Abwurfhöhe 1200 total power requirement: Förderer 0,15 + Pumpe 1 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 4 x 1,3 (0,4) x 1,7 m No. 5530 1 used Scraper belt conveyor KNOLL KNOLL 370 K-2 Insertion / feeding area approx. 370 x 2050 x 285 mm Tank approx. 250 l plus belt volume (approx. 250 l) Pump approx. 228 l / 1 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: Ø 340 / 340290 mm band length: 600 52 2,5 mm cutting lenght max.: x 600 mm total power requirement: 6 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,52,51,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 660 mm turning length: 1500 mm control: FAGOR centre height: 330 mm spindle passage: 82 mm number of spindle speeds: 30-2000 U/min bed width: 390 mm rapid speed: X/Z 4 - 8 m/min tailstock quill diameter: 75 mm Main spindle capacity: 15 kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: 3800 x 1800 x 2150 m First commissioned in 2015, very good condition - FANUC Series 18i TB Control, Manual Guide i Function - Central control panel for machine and CNC control on the pedal arm 45 ° swiveling - 12-fold tool turret - Fanuc drive with 30 kW (50% ED) - Chip conveyor - Bezel - 3 jaw chucks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 480/500 mm y-travel: 230/250 mm z-travel: 380/400 mm speeds: 45 - 2240 U/min table surface area: 1000 x 250 mm tool taper: SK 40 control: HEIDENHAIN TNC 124 total power requirement: 3 kW weight of the machine ca.: 1550 kg dimensions of the machine ca.: 2600 x 2200 x 1800 mm - horizontal + vertical milling spindle - Cooling device - swiveling table - Chip tray - Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min - Rapid traverse X/Y/Z - axis 4000 mm/min - Control HEIDENHAIN TNC 124 - Operating hours: 4764 hours - Machine light - Machine feet - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: 175 mm centre distance: 1000 mm grinding wheel dia. x width: 400 x 50 / 225 x 20 mm grinding wheel hole diameter: 127 / 76.2 mm grinding wheel turining speeds: 1500-2200 U/min cross slide - travel: 245 mm workpiece spindle head:: turning speed range - stepless: 6-600 U/min spindle cone MT: 5 tailstock quill taper MT: 3 max. angular position of the table: +/- 8 ° weight of the machine ca.: 3.1 t dimensions of the machine ca.: 2.85 x 1.75 x 1.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1700 mm y-travel: 1200 mm z-travel: 1600 mm table surface area: 1700x1200 mm turning speeds: 35-1800 U/min feed: 20-1550 m/min Spindle: 300 mm throat: 1200 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pulling force - max.: 25 t max. ram stroke: 1500 mm max. workpiece diameter: 630 mm cutting speed: 1,5 - 7 m/min return speed: 7 - 25 m/min workpiece height max.: 360 mm tool diameter: 130 mm Shank diameter: 70 mm table surface area: 600 x 600 mm Control: distance between columns: 635 mm total power requirement: 18,5 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 1,1 x 1,7 x 5,2 m Machine was hardly ever used, not even in single-shift operation. - 3 broaching positions, can also be used individually - Hydraulic drive - without tools or other accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cooling unit (chiller) - E.Braun GmbH UC 14.K1W.LT Year of construction: Description: Cooling capacity approx. 20 kW Refrigerant R407C The device has: -Compressor - Separate container for medium -Circulating pump -Heat exchanger -Radiator -Fan The unit after maintenance, fully functional with new refrigerant 3-month operation warranty in Poland All offered peripherals are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Edge banding machine Type: KDF 440 Manufacturer: Brandt Year: 2010 In good condition, under power Find more here - / Contact us at -
thread splicer machine for veneer model KUPER FW 1150 second hand machine volt. 380/50
Key data: 125 mm
KESEL ARNO Vise 125mm Type 04.11.125.000.9 New in the packaging, unused and complete
Max. bar length 1,500 mm Bar diameter 4 – 85 mm Weight approx. 400 kg UNUSED!
Key data: 36 KW, 45 kVA, 400 V
Power Generator Specifications: Model No.: EQ-I4536 Prime Rating: 45 kVA / 36 kW Standby Rating: 50 kVA / 40 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: NEF45AM1A Bore x Stroke (mm): 104 x 132 Displacement (L): 4.5 Compression Ratio: 17.5:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2220 mm Width: 960 mm Height: 1258 mm Weight open: 1045 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically paint-coated, welded steel chassis Fuel tank integrated into the chassis Industrial sil ...
Key data: 48 KW, 60 kVA
Number 007 Generator sets Type: K0363 Engine Iveco Generator LeRoy Somer Power: 60 KVA / 48 KW Hz 50 RPM 1500 IP 21 AVR controller RS 437 Year of manufacture 1989 Hours 237 Accessories: Control cabinet Metrics: L: 2.25m H: 1.50m B: 0.70m You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
sheet width: 1350 mm plate thickness: 3 mm cutting angle: 1° 30 no. of strokes: 35 Hub/min table height: 850 mm rear stop: 450 weight of the machine ca.: 1200 kg dimensions: ca. 1700 x 1650 x 2000 mm manually operated back gauge 450 mm working lifght included safety gate included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 36 KW, 50 kVA, 400 V
Made in EU 30 months warranty Stamford Alternator ComAp Control Power Generator Specifications: Model No.: EQ-I5048 Prime Rating: 50 kVA / 48 kW Standby Rating: 55 kVA / 53 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: NEF45AM2 Bore x Stroke (mm): 104 x 132 Displacement (L): 4.5 Compression Ratio: 17.5:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2430 mm Width: 1056 mm Height: 1700 mm Weight open: 1040 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically paint-coated, weld ...
Pressure total: 400 ton Ram stroke: 500 mm Slide adjustment: 350 mm Daylight: 1250 mm Table surface area : 2500 x 1500 mm Slide area: 2500 x 1500 mm Number of strokes: 15 - 30 s.p.m. Die weight at the ram max.: 4000 kg Required power: 70 kW Height over floor approx.: 8000 mm Weight of machine approx.: 150 ton
Offer 25101 Specifications: - Cutting range at 90° around 400 mm - flat W 400 x H 400 mm - Cutting area at 45° flat W 320 x H 320 mm - Cutting area at 60° flat W 210 x H 320 mm - Material support height approx. 700 mm - Saw blade dimensions 5090 x 34 x 1.1 mm - Cutting speed infinitely variable 17 - 90 m/min - hydr. Lifting – lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 3.5 kW - Coolant device - Roller conveyor feeder 7000 mm - Discharge – roller conveyor with stop + digital display 4000 mm - Space requirement approx. W 2000 x H 1400 x D 2800 mm - Weight approx. 1200 kg
Pressure total: 400 ton Ram stroke: 500 mm Slide adjustment: 350 mm Daylight: 1250 mm Table surface area : 2500 x 1500 mm Slide area: 2500 x 1500 mm Die cushion capacity in table: 80 ton Die cushion stroke: 250 mm Number of strokes: 15 - 30 s.p.m. Die weight at the ram max.: 4000 kg Required power: 70 kW Height over floor approx.: 8000 mm Weight of machine approx.: 150 ton
Various metalworking machines are available. 1) Larger BBM guillotine shears, year of manufacture: 1995. 2) Nimak spot welding machine, year of manufacture: 1990s. 3) Roundel machine Schwartmanns, year of manufacture: 1987. 4) Smaller lathe Weiler, year of manufacture: 1966. 5) Table-top stud welder Soyer, year of manufacture: 2000s. 6) Freestanding grinding motor. 7) KSM deburring machine, year of manufacture: 1980s. 8) Larger Tox hydraulic stamping press, year of manufacture: 1990. 9) TES 15 hydraulic press, year of manufacture: 1972. 10) Single-column table press, year of manufacture: 1955. 11) Landert honing machine. On-site inspection is possible.
Guowang Cutting Machine K137CL (2008) Well-maintained cutting machine by Guowang, model K137CL, year of manufacture 2008. This machine has served us reliably for many years and is still in very good condition. Specifications and extras: • Includes 2 Widia cutting knives, only sharpened twice • Software is up to date • Always professionally serviced with annual maintenance by a certified technician • Fully compliant with all current safety inspections • Comes with various spare parts, manuals, and electrical schematics • Equipped with high-quality, European components from brands like Omron, Moeller, and Leuze
Used bread roll line KÖNIG, type: Combiline - Head machine KÖNIG Basic Rex - 5 rows - Long rolling station - Pre-proofer - Punching station - Settlement on sheet metal - Weight range: approx. 40 - 120 g - Output: maximum approx. 5,000 pcs./h The plant is still in operation and can be visited. We will be happy to send you further photos and technical data on request.
Key data: 250 mm
Kitagawa TT 250 HMM03 NC Rotary Tables Table diameter 250 mm Spindle bore Ø 70 mm Weight 260 kg If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
Digital Grinding diameter 250 mm Grinding length 650 mm Accessories
Eddy current screening machine with belt drive Manufacturer: Kemutec KEK Type K 800 C Version - ATEX 2/3 D
For sale is a good used Keyence digital measurement projector of the type IM-6025. The measuring device is sold including the IM-7500 control unit. Prior sale and errors excepted.
pressure: 40 t throat: 225 mm stroke: mm total power requirement: 4,7 kW weight of the machine ca.: 3,45 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 05394 Specifications: - BIA tested sweat extraction device - Joint extraction arm 3000 mm - Air volume flow approx. 1000 m³/h - max. static pressure 2700 pa - Filter area approx. m² - Filter control - light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg
degree: 700 Grad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. grinding diameter: / mm grinding length: / mm workpiece length: / mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
round bar steel: div mm square edge steel: div mm L-beam: div mm No. 2984: 1 used plate, profile and bar shear with notcher 50 to manufactured by PEDDINGHAUS, type 210 / 13 Standard, built 1965 No. 3418: 1 used combined section shear 80 tonnes manufactured by PEDDINGHAUS, type 210 Super 16, built ca85 Cuonnbjt0a No. 3668: 1 used steel section shear + punching machine 95 to PEDDINGHAUS, type 210 Super 20, year of construction 1978 Space requirement 2.20 x 1.00 x 2.35 m, weight approx. 4.5 tonnes No. 3286: 1 used steel profile shear 65 to MUBEA / MUHR & BENDER, type KBL 16 N No. 1096 1 used hole punch 26 to EDEL SMO 26, various accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pulling force - max.: 16 t broaching length max.: 1250 mm table width: 400 mm broaching speed: 1...6,4 m/min return speed: 19,5 m/min tool length - max.: 1500 mm total power requirement: 42 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m - Specification: 2- jobs broaching right or left / right and left at the sametime The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 25 mm throat: 255 mm bore stroke: 135 mm spindle turning speed range: 8, von 105-2900 U/min table-size: 500 x 350 mm column diameter: 100 mm spindle taper: MK 3 total power requirement: 0,65 / 0,9 kW weight of the machine ca.: 190 kg dimensions of the machine ca.: 0,5 x 0,5 x 1,7 m Electric 380 Volt: Drill chuck: Unused exhibition machine at a special price: New gear machine, 2-stage right/left rotation, height-adjustable drilling head, Construction principle Arboga - Sweden, maintenance-free gearbox with helical teeth Wheels, drill head and table are adjustable 360 degrees around the column,chip protection with electr. Switch, drilling depth indicator. This is a exhibition machine at a special price, so we are selling it without any warranty. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software so ...
bore capacity in steel (diameter): 60 mm / MK5 arm length: 1600 mm quill stroke: 310 mm spindle speed:: 28...2500 U / min table-size: 1470 x 986 mm total power requirement: 4 kW weight of the machine ca.: 4,6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8441 Type: KOMBI 1000 Producer: Reckermann Generated: Parameters: Work table length: 1370 mm Work table width: 400 mm X-axis travel: 1000 mm Y-axis travel: 350 mm Travel Z axis: 450 mm
Sensitivity: ferrous metals: 2mm, non-ferrous metals: 3mm, non-magnetic stainless steel: 3.5mm. min. product dimensions X/Y/Z: 170mm/110mm/20mm, max. product dimensions X/Y/Z: 270mm/260mm/150mm, product weight min./max.: 100g/3000g, product distance: 300mm, speed: 20m/min, throughput: approx. 50 pieces/min. Machine dimensions X/Y/Z: approx. 1700mm/1500mm/1000mm, weight: approx. 100kg. Including discharge by air. On-site inspection is possible.
A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 20 ...
x-travel: 1000 mm y-travel: 600 mm z-travel: mm total power requirement: 2,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
IDM manual edgebanding machine for shapes model KOMPACT according to CE standards
SPECIFICATIONS: Working width: 420 mm Feed speed: 6 m/min Voltage: 230 V
Specifications Maximum pressure: 75 tons Year of Make: 1999 Press force: 90.9 t/m² Number of bindings: 4 vertical Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1550 mm Bale weight: 500-750 kg Weight: approx. 25 tons Power connection: 400 V Bale tying: automatic Motor: 75 kW (possibility of switching to 55 or 45 kW) Press capacity at idle: max 750 m³ / hour Press capacity under operating conditions: max 350 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 12 tons/hour Theoretical throughput to density 60 kg/m3: approx. 21 tons/hour Theoretical throughput to density 100 kg/m3: approx. 33 tons/hour Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Cho ...
maximum number of results exceeded
please refine your search
