127,902 used machines on RESALE, but how to find them? Machine Search
Manufacturer: Bürkle, Type: SLC 700, Year: 2009, Control: Bürkle, Work piece width min-max mm: 700, Operating side: rechts, Year :2009
Manufacturer: Rippert, Type: DTK 7000, Year: 1995, Work piece width min-max mm: 1300, Channel length in mm: 15.000, Kanaltemperatur Grad: 56 / 70, Umluftleistung m³/h: 2 x 8.650, Abluftleistung m³/h: 2 x 780, Raumluft m³/h: 2 x 780, Mischluftventilator kW: 2 x 7,5, Thermal output: 2 x 36, Belt conveyor: yes, Air speed in jets: 25, Max. air temperature: 56 / 70, Heated by: Wasser, Damper register - items: 2, Solvent quantity g/min: 2 x 12.390, Year :1995
Manufacturer: Comil, Type: Astro 700, Year: ca.1990, Hochschränke und Hänger: 680, Work piece width min-max mm: 300 - 2500, Min.-max. workpiece length in mm: 300 - 1300, Min.-max. workpiece height in mm: 800, Working width min min mm: yes, Hydraulical/pneumatical: yes, Min.-max. pressing length in mm: 1300, Cylinder horizontally: no, Pre-assembling conveyor: 22,5, Feeding speed continous adjustable: jyes, Discharge belt roller conveyor height: 7, Machine rigging: 2860, Press power kg /cm²: 7500, Year :ca.1990
Manufacturer: Comil, Type: Astro 700, Year: 1990, Work piece width min-max mm: 680, Min.-max. workpiece length in mm: 300 - 2500, Min.-max. workpiece height in mm: 300 - 1300, Working widht max mm: 800, Hydraulical/pneumatical: yes, High / low pressure: yes, Min.-max. pressing height in mm: 1300, Pre-assembling conveyor: no, Feeding speed max m/min: 22,5, Glazing tape: jyes, Connected load in kW: 7, Machine height mm: 2860, Machine width mm: 7500, Year :1990
Manufacturer: Signode, Type: MDGW 700, Control: Fusspedal, Belt width mm: 8, Bandabroller : yes, Bandspannung einstellbar : yes, Feeding belt control: ka, Funktionswiederholung : yes, Ausstattung Fahrrollen : yes, Rollendurchmesser mm : 600, Box dimensions max. L x W x H mm: 600 x 800,
x-travel: 7.000 mm y-travel: 2.000 mm z-travel: 1.250 mm Control: Heidenhain iTNC 530 Internal cooling system: 15 bar milling head: Automatisch 0,001 spindle turning speed range: 4.500 U/min spindle drive: 37 kW taper ISO: 50 tool change unit: 60 Chip coveyor: Inkl. rapid traverse: 20/10 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m -CTS 15 bars -Controlled milling head (pos. Accuracy 0,001) -60 tools -37 kw spindle motor -rapid 20/10 m min -4500 rpm -iso50 -Renishaw RPM60 -chip conveyor -extra milling head (spare) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data of the pallet rack crossbar: Shelving system: Nedcon Type: NS The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Box profile: 130 x 50 mm Clasp: 7 HK (hooks) Clear width: 3,700 mm Max. load per pair of trusses 3,000 kg at the same weight. Distributed load 02x Locking pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Year of construction 2000 Mobile stacking delivery for marking-free laying Banding display with max. 3 panels Computer control with digital display Bundling with paper or plastic tape Mobile substructure Delivery date: immediately Price on request. We supply and install worldwide.
3000w Year: 2018 5 Axis Fiber Laser 3000w Y Axis: 1500mm Twin Cell Machine
used
With C and Y axis Max. workpiece diameter 366 mm Max. workpiece length 708 mm Max. bar capacity diameter 105 mm Max. X-axis stroke 260 mm Max. Y-axis stroke 120 mm Max. Z-axis stroke 795 mm Controller Siemens
Technical data of the pallet rack crossbar: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 5010 Gentian Blue Box profile: 120 x 50 mm Truss Type: TRV1-270-125-30 CE Clear width: 2,700 mm Agraffe: 5 HK (hooks) Max. load per pair of trusses 3,300 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery can be queried from us
Technical data of the pallet rack crossbar: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 5010 Gentian Blue Box profile: 160 x 50 mm Truss Type: TRV1-270-160-30 CE Clear width: 2,700 mm Agraffe: 5 HK (hooks) Max. load per pair of trusses 3,400 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery with us
Technical data of the pallet rack crossbar: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: yellow Box profile: 116 x 40 mm Truss Type: GNA116x40|SEG5 Agraffe: 5 hooks Clear width: 2,707 mm max. load per pair of trusses 2,400 kg, with the same. distributed load. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.
Vötsch VTSR 7034/S Climate Test Chamber -70 to +180°C Manufacturer: Vötsch Type: VTSR 7034/S Test chamber capacity: 335 litres Climatic test chamber Temp. range: -70 to +180°C Mains voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated current: 22 A Rated power: 12.5 kW Refrigerant VK: R 404 A Refrigerant TK: R 23 Test Chamber Dimensions: Width 580mm Depth 765mm Height 750mm Exterior Dimensions: Width 870mm Depth 1595mm Height 1775mm Year of Make: 2002 TK-11 More items - new and used - can be found in our shop! International shipping costs on request!
Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Item No.: 60885637 Temperature cabinet Temp. range: -70°C to +180°C Mains voltage:400V Rated Current:24A Rated power: 9.5 kW Refrigerant VK: R 404 A Refrigerant TK: R 23 Year of Make: 1998 TK 09 More items - new and used - can be found in our shop! International shipping costs on request!
Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Item No.: 60885637 Temperature cabinet Temp. range: -70°C to +180°C Mains voltage:400V Rated Current:24A Rated power: 9.5 kW Refrigerant VK: R 404 A Refrigerant TK: R 23 Year of Make: 1997 TK 08 More items - new and used - can be found in our shop! International shipping costs on request!
Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Item No.: 60885637 Temperature cabinet Temp. range: -70°C to +180°C Mains voltage:400V Rated Current:24A Rated power: 9.5 kW Refrigerant VK: R 404 A Refrigerant TK: R 23 Year of Make: 1996 TK 07 More items - new and used - can be found in our shop! International shipping costs on request!
Key data: 1000 mm, 3000 mm
achine details Stock-No. 1105-04069 Type of machine CNC Turning- and Milling Center Make DOOSAN DAEWOO Type PUMA 700 LM b Year of manufacture 2006 Type of control CNC Storage location FRANCE Country of origin KORREA Delivery time IMMEDIATELY Freight basis EX WORK Price Technical details turning diameter 900 mm turning length 3050 mm control FANUC 21 i TB swing dia. 1030 mm Standard Turning Diameter 750 mm Bar Material Dia. 165 mm Spindle bore 110 mm Travel -X Axis 471 mm Travel -Z AXIS 2100 mm Rapid Travel - Longitudinal/Face 15/ 20 m/min Spindle RPM 3000 1/min spindle drive 45 kW turret stations / rotary tool stations 12 / 6 BMT 85 speed of driven tools 3000 1/min total power requirement 62.2 kVA Weight of the machine approx. 22.2 t dimensions of the machine approx. 6.1 x 2.2 x 2.2 m Accessories Chip conveyor YES Parts and total counter Tool holders ...
HWS 702S Rocking circular saw Saw blade diameter 700mm Cutting capacity round timber max. 240mm Logs max. 370 x 240mm Speed 1400 rpm Motor 7.5kW 400V 50Hz LxWxH 1270 x 730 x 1130mm Weight 128kg G&STÜ-5963710
Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 120 x 50 mm Truss type: BX 120|50|13 Agraffe: 5 HK Clear width: 2,700 mm max. load per pair of trusses 3,150 kg, with the same. distributed load. (Note bay load) 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Key data: 7000 kN, 40 mm
Engel E-DUO 740H/740L/700 combi BJ./YEAR 2017 approx. 3871 hrs/h Machine overview: Clamping force: 7000 kN Screw diameter: 40 mm Screw speed: 300 rpm Dosing stroke: 200 mm Control: Engel CC300 Weight: 22 tons Hours: 3871 hours Features: Electric 6-Station Turntable Electrical quick adjustment for the machine plate stroke Two injection units, each with 3-zone screw (D45 mm) 32 zones for hot runner control Electric plasticizing units Full documentation included Status: Ready for use (used) Hours: 3871 Condition of the machine: Already disassembled Defects or missing parts: No known defects, regularly serviced Technical documentation: Complete and available (can be consulted on site)
sheet width: 700 mm plate thickness: 4,0 mm distance between columns: 720 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 0,95 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thickness of jaw: 160 mm : 50 mm clamping width: 180 mm weight: 37 kg dimensions of the machine ca.: 450 x 240 x 130 mm mechanical vice in great condition - with crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 100 x 50 mm Truss type: SLB 100|15 Agraffe: 5 HK Clear width: 2,700 mm Max. load per pair of trusses 2,700 kg, with the same weight. Distributed load 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Krohne Promass 7000 T50 - DN50 - Straight pipe - Full bore - Separate control panel - YOM 2013 - SN: G130000001602881 The flowmeter is tested and in good working condition.
Dicing machine DKS 700 DMS Stainless steel Electric power: 1,5kW Voltage: 380V / 50Hz Cutting chamber size: 700 x 200 x 220 mm
turning diameter: max. 366 mm turning length: 705 mm control: M 730 BM MAPPS IV greates pass round over bed: 920 mm Swing dia. over traverse guideway: 742 mm Main spindle:: turning speed range - main spindle: 4.000 min/-1 power capacity - main spindel: 18,5 / 15 kW spindle nose: JIS A-8 spindle bearing diameter: 140 mm spindle bore: 91 mm max. usable bar diameter: 80 mm chucking diameter: 250 mm Subspindel:: Spindle speed range subspindle: 6.000 min/-1 power capacity - Sub spindle: 11 / 7,5 kW spindle nose: JIS A2-5 spindle bearing diameter: 85 mm spindle bore: 43 mm max. usable bar diameter: ( - ) mm chucking diameter: 170 mm axis stroke:: x-travel: 260 mm z-travel: 795 mm Y - Axis: +/-50 mm rapid traverse ( X / Y / Z ): 30 / 10 / 30 m/min turret:: number of toolpositions: 12 pos. tool taper: BMT 60 Schank height for square tool: 25 mm Drill shank diameter: 50 mm turret change time: ...
Drilling capacity (steel): 100mm, max. pitch circle diameter: 7000mm, spindles: 2, spindle speed: 3000rpm, spindle mount: ISO 50, drill carriage stroke: 900mm, feed: 6m/min, power: 125kW. Machine dimensions X/Y/Z: approx. 13000mm/11000mm/5100mm, weight: approx. 18000kg. On-site inspection is possible.
Travel X/Y/Z: 700mm/500mm/600mm, speed: 6300rpm, power: approx. 10kW, feed X/Y/Z: 4m/min, rapid traverse X/Y/Z: 10m/8m/10m/min, machine dimensions X/Y/Z: approx. 4500mm/2300mm/2500mm, weight: approx. 6000kg, operating hours: 65425h. On-site inspection is possible.
An eroding island consisting of two die-sinking EDM machines and an automation system is available. 1) Zimmer & Kreim ZK Genius 700, year of manufacture: 2015, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator output: 96A, path eroding: CIMCO, operating hours: 22056h. 2) Zimmer & Kreim ZK Genius 700, year of manufacture: 2019, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator power: 96A, path eroding: CIMCO, operating hours: 8255h. 3) Automation Zimmer & Kreim Chameleon Quad, year of construction: 2015, electrode positions: 176, pallet positions with loading drawer: 9, double rotary gripper for Erowa ITS and single gripper for UPC pallets. Overall system dimensions X/Y: approx. 3000mm/6200mm. Including a Kraft & Bauer fire extinguishing system with suction device. Documenta ...
: vice: x-travel: 700 mm : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A smoke melting system is available. Components: Furnace, conveyor belt, electric stacker, melting container, ingot casting belt. Total plant dimensions X/Y/Z: approx. 6000mm/3500mm/3800mm, total plant weight: approx. 4500kg. Documentation available. On-site inspection is possible.
sheet width: 700 mm plate thickness: 4,0 mm distance between columns: 720 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 0,95 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 700 mm table width: 400 mm x-travel: 450 mm y-travel: ? mm total power requirement: 0 kW weight of the machine ca.: 0,36 t dimensions of the machine ca.: 1,210,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Travel X/Y/Z: 700mm/500mm/450mm, table dimensions X/Y: 900mm/500mm, max. table load: 500kg, spindle mount: SK40, speed: 3150rpm, quill stroke: 100mm, feed: 3m/min, rapid traverse: 6m/min, machine dimensions X/Y/Z: approx. 3550mm/3150mm/2100mm, weight: approx. 3600kg. On-site inspection is possible.
x-travel: 700 mm y-travel: 500 mm z-travel: 500 mm Control: CNC 432 total power requirement: 10 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3 x 3 x 2,6 m No. 0052 Universal tool milling machine MAHO MH 700 C Working area: 700 x 500 x 450 Drive: 10 kW Control: Philips CNC-432 Fixed table Fully protected cabin with 3 sliding doors Tool holder: ISO-40. Speeds: 20-3150 min-1 Feed rate: 1-3000 mm/min, rapid traverse 6 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 80 - 700 mm workpiece-spindlehead motor: 0,25 kW grinding wheel diameter: 125 mm turning speeds: 2850 U/min grinding range: -20 bis +20 Grad weight of the machine ca.: 12 Kg dimensions of the machine ca.: 700 x 400 x 300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 410 mm y-travel: 310 mm z-travel: 400 mm total power requirement: 2,2 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 222 m Universal tool milling machine HERMLE UWF 700 Spindle holder SK 40 Speed range 40-2000 min Space requirement approx. 2 x 2 x 2 m Weight approx. 1100 kg For further data see attached PDF Rigid table 700 x 285 Horizontal milling machine vertical - milling head enclosed - partially rep. conditioned Documentation Working area: approx. 410 x 310 x 400 Drive: 2,2 Heidenhain digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1000 mm plate thickness: 3,3 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,39 t dimensions of the machine ca.: 1,4 x 0,9 x 1,2 mm Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
KOPPENS MACHINEFABRIEK BV FRYER, TYPE BRN 3000/700 Technical features: Machine number: BRN 3000/700-994 Voltage / frequency: 380v, 3 ph, 50hz, 23.09 a, 9.7 kw Weight: 2940 kg Heated by thermal oil Prepared with fire extinguisher system S/s mesh belt, belt width: 700 mm Total dimensions: 6500mm x 1800mm x 2380mm
table diameter: 700 mm table load: ? t table height: 165 mm weight of the machine ca.: 300 kg dimensions of the machine ca.: 7501000165 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 4 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 222 m 1 x UWF 700 Digi 3 x UWF 801 TNC 135 + 124 1 x UWF 802 M From stock liquidation, partly not functional / in need of repair Price VHS / against bid The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data of the pallet rack crossbar: Shelving system: Polypal Type: Stockpal The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 5001 blue Box profile: 120 x 50 mm Type: SKVBN 12050CP33 Clasp: 2 HK (hooks) Clear width: 2,700 mm Max. load per pair of trusses 3,000 kg, with the same weight. Distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
x-travel: 400 - 1600 mm y-travel: 250 - 800 mm z-travel: 350 - 800 mm Control: CNC weight of the machine ca.: 1,6 - 16 t dimensions of the machine ca.: - m MAHO - Package from stock clearance - Special price for sale 4 x milling machine -MAHO MH 400 C - CNC 432 -MAHO MH 700 C - CNC 432 -MAHO MH 800 T - CNC 332 -MAHO MH 1600 S - CNC 432 EXW - Ex works Bensheim / Lorsch Free lorry The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 700 mm turning length: 1250 mm control: TX8_i total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: 6,0 x 2,5 x 2,2 m CNC control TX8_i 9 CNC axes (X1, X2, Z1, Z2, Y1, B1, B2, C1, C2) Software functions: Tool life monitoring, Polyform, 3D-Helical IP, synchronous threads without L compensation, WOP Traub Win_Flex IPS incl. Mouse, MAIN SPINDLE (direct drive, adjustable hollow shaft motor) Spindle connection A-11 > DIN 55026/ 55021 Alignment and switching device Hollow clamping cylinder > spindle passage max. 102 mm speed max. 3,000 rpm Front bearing dm170 mm Drive power 100/40% ED 53 / 68 kW, torque 675 / 900 Nm C-axis resolution 0.001 ° Spindle locking for extreme roughing work 2.5 ° Counter spindle (direct drive, adjustable hollow shaft motor) Spindle connection A-11 > DIN 55026/ 55021 Alignment and switching device Full clamping c ...
I am selling this machine. Plugged in, can be tested. Very good condition. Documentation for the machine. Can be sent via whatsapp video of the machine
Transnorm Rising falling Incline with arch belt conveyor GF 6000+800-700-600 RA2181 Technical data: Conveyor length (NL): 6800 mm (6000 mm incline + 800 mm arch) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed controll Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 6800 ( 6000 + 800 ) Nominal / outside width ...
Sliding table saw and table milling machine Felder KF 700 S YOC 2024 Format carriage length 2500 mm Motor/Voltage 5.5 kW / 7.5 HP / 400 V Scoring Ø 120 mm X-Roll Sliding Carriage Cutting width 850 mm with digital display Electromotive height adjustment Saw blade swivel 45° manual adjustment Saw blade Ø 315 mm Motor/Voltage 5.5 kW / 7.5 HP / 400 V Cutting height max.110 mm Table milling machine motor 5.5 kW Spindle tiltable 0-45° Left/right rotation selectable Speed 3500 / 6500 / 8000 / 10 000 rpm Max tool diameter 230 mm Spindle diameter 30 mm Total weight approx. 700 kg
maximum number of results exceeded
please refine your search
