7 axis used for sale

RYOBI 754P , 2x2 PLATE RUNNING 765 X 545 PLATE MAX 78 X 60 Year 2007 Imp 30 Mio Perfecting - Automatic Automatic Rubber And Color Washers Autoplate IR-dryer Material thickness 0,04 - 0,6 mm No Damages On Cylinders And Gears

Manufacturer: Transporband 1000 X 780 mm, Working length mm: 1000, Working widht mm: 780, Total hight mm: 920, Total power kW: 0,7,

length: 700 mm width: 700 mm height: 630 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC NUM 760 full cnc visible in our warehouse in Gussago BS Italy

5 axis CNC – portal profile machining center for all materials - aluminum - steel - stainless steel - plastics - non-ferrous metals. Drilling + tapping, flow drilling, milling + thread milling, as well as sawing at free angles – for example, steel profile saws up to 6 mm wall thickness Largest saw blade diameter 500 mm Largest machining length 7,000 mm Largest workpiece cross-section 650 x H 300 mm Working range in five-axis operation 6,400 mm x 480 x H 300 mm Spindle drive power 17 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving tool magazine for 12 tools Tool holder HSK 63 Rapid speeds up to 100 m/min / acceleration 2.5 G Space requirement (including control cabinet and control panel) approx. 9 m x 2.5 m x H 2.6 m Weight approx. 5,000 kg. equipment: - OSAI® CNC control - YASKAWA® feed drives and feed controllers - HITECO® milling spindle wit ...

height of profile: 60 mm : 60 weight of the machine ca.: 188 kg dimensions of the machine ca.: 0,85 x 0,45 x 1,25 m foot switch: - Fabr.-No.: 292539 - pneumatic clamping head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

for spare parts. Machine is out of service. Processor card removed

Transnorm belt curve conveyor left 90°-700-500-IR900 RA1967 Technical data: Frame width (NB): 700 mm belt width (GuB): 500 mm height (BH): 220 mm height including motor (MH): 480 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees Conveying speed (v m/s) Drive: SEW gear motor Electrical data: 50Hz V230/400, kW 0.37 / S1 Belt:KT58, wear see pictures Year of construction: 1997 Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 1997 condition: gut Nominal / inner radius in mm: 900 Nominal / outside width in mm: 700 Belt width in mm: 500 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,37/S1 scope of delivery: ohne Frequenzumrichter, without supports and side guides If you need other dimensions or individual ...

Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Fra ...

For sale is a high-precision 3D coordinate measuring machine (as new) of the KEYENCE VL-700 / VL-770 series. The device was purchased in 11/2023, is in excellent condition and has been used exclusively in laboratory conditions. Technical Highlights & Details: • Model: KEYENCE VL-700 / VL-770 (VL-700 Series) • Year of construction: 2023 • Measurement method: Optical 3D surface detection with automatic 360° all-round measurement • Measuring principle: Projection of structured light patterns with a high-resolution CMOS camera • Capture: Complete 3D digitization of complex geometries without manual probing • Condition: Well maintained, fully functional, ready to use • Accessories: Incl. control computer, KEYENCE software package, calibration standard and original accessories ________________________________________ Pros: • Extremely easy to use ("place and  ...

FOLIANT Taurus 760 SF Industrial Laminating Machine year 2017 Max sheet size : 760 x 1150 mm Min sheet size : 320 x 250 mm Max speed : 30 m/min Paper weight : 115 - 600 gsm Temp control : 80 - 140 C Lamination films : BOPP 23 - 42 microns , max nylon film max 35 microns, PET film max 25 microns - Pallet Feeder - Touch screen controls - PLC controlled overlaps - Almost 8 minute warm up time - Film air shaft - Integrated Bump separator - Pallet stacker

Belt conveyor combination 2 x GG 750-760/650 consists of 2 piece belt conveyors each with separate drive Make: Dematic Each conveyor belt length: 750 mm Total length of the combination: 1,550 mm Width: 700 mm Belt width: 650 mm Overall width: 760 mm Conveyor speed: v = 0,7 m/sec without supports without Guide other conveyor speed frequency converter .. Please ask if needed Features: Construction year: 1999 condition: good (used) Conveying length in mm: 750 Nominal / outside width in mm: 700 Belt width in mm: 650 Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: 0,7 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hör ...

cardan shaft, cardan shaft, universal joint shaft, drive shaft -Cardan shaft:Cardan joint shaft with length compensation and double joint on both sides -Dimensions retracted: 700 mm -Flange: bolt circle Ø 52 x 6 mm -Flange: outside Ø 65 mm -Sliding length: see photos -Total dimensions: Ø 65 x 700 mm -Weight: 4 kg

PRT WATER RING PELLETIZER, for PE PP PS PC ABS, nominal capacity 600-700 kg/h (tested up to 900 with PS), N.4 cutting blades, N.1 thermoregulation zones, Heating power 8.00 kW, Cutting motor power 4.00 kW, N.1 water pumps, heat exchanging unit, Single water pump power 3.00 kW, Vertical centrifuge power 5.50 kW, Steam vacuum power 0.25 kW, soundproofed discharging cyclon, Total installed power 20.75 kW, constructed in 2006, only 200 worked hours, excellent conditions, installed power - used power in work: about 60-65% : 20.75, conditions: as new, availability: immediate, capacity: up to 600-700 kg/h (tested with PS 900 kg/h), PRESENT CONDITIONS: as new, excellent quality, price is less than 50% of a new one

ZERMA GSH 700/1000 (there are 2 machines available), 1.000 mm wide rotor, Ø 700 mm., n. 14 pcs rotor knives, n. 2 pcs stator knives, 90 kW drive, Screen 60 mm (or bespoke), 985 x 804 mm feeding hopper, Material that were processed: LDPE film, HDPE film, PP film, including the supporting structure, The machine is offered totally reconditioned with warranty, installed power - used power in work: about 60-65% : 90 kW, availability: 1 month, working width: 1.000 mm., options available: different screen size, conditions: totally reconditioned with warranty

We offer a powered shears roller conveyor for sale. The length is variable: 3275 mm 8735mm max. Roll width 760 mm. Suitable for distribution centers and depots for the loading and unloading of trucks, containers and wagons. Stepless height adjustment. A very simple drive into various types of vehicles for its fast and safe loading and unloading. After use, can be easily folded away to save the space in the warehouse. Technical data: Length retracted: 3275 mm Length extended: 8735 mm Width: 760mm Adjustable height: from 730 to 1040mm Rows of rollers: 67 units Three-phase motor 120W Speed: from 5-35M / min. Control Panel x 1 piece Panel x 1 piece maximum load: 80kg / M Number available: 4 PCs. Net price: â?¬7750 / piece Delivery possible. Please specify your postal code and directly ask.

1 pc for sale, in working order, good condition Husky HPN 726619 HMI Human Machine Interface FOR SALE XYCOM 9960 Operator Station HMI for Husky G-line, Index-line & others PET Preforms Injection Molding Machines. Exworks Miami USA contact us: j.plaul@optimisense Whatsapp +5491157143569 US Mobile +1.305.831.8888 Skype: optimisense For more info and pictures join our FB group HUSKY USED PET PREFORMS RELATED MACHINERY

Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank / Storage Tank / Pressure Tank with red food safe munkadur coating with cooling jacket and with isolation STANDING with new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 5.750 Litre Measurement and Weight: Total Height: 4400 mm Tank Body Height: 3325 mm Diameter: 1600 mm Weight: 2110 kg Uni 3750 Operating-overpressure: 8 bar, Test pressure: 10,5 bar Operating pressure cooling jacket: 2 bar, Test pressure: 2,6 bar Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Jacket and walls 9 mm. On cylindrical part of a cooling jacket as double jacket about 2.500 mm high. Container outside approx. 100 mm isolated, with screw stainless steel metal cover. Tank upp ...

GTA Normlifter 750 Year of construction : 2014 Hours: 6100 Condition: ready for use Price on request

2025 BIG backhoe bucket 70cm with MS03 Symblock attachment, Technical specifications:, - Weight: 103 kg, - Recording width: 70 cm, - Contents: 149 liters, - CAT 3 - suitable for 2.8 - 3.9t excavators

2025 BIG backhoe bucket 70cm with MS08 Symblock attachment, Technical specifications:, - Weight: 210 kg, - Recording width: 70 cm, - Contents: 293 liters, - CAT 5 - suitable for 5.6 - 9t excavators

2025 BIG backhoe bucket 70cm with OQ45 attachment, Technical specifications:, - Weight: 215kg, - Recording width: 70 cm, - Contents: 293 liters, - CAT 5 - suitable for 5.6 - 9 t excavators

Manitou MT1033 Easy 75D ST5 S1 Telescopic Loader, - Year of construction: 2021, - Nominal power: 55.40 kW, - Net weight: 7950 kg, - Maximum speed 20 km/h, - Range: 7.15 m, - Hook height: 9.98 m

Due to new motorization, this Reintjes gearbox type WAF 763L with subzetsung 5.750: 1 half May 2026 is available The shooting hours is dan Umnabei 64.000

Includes the following tools: 9K / 10K / 11 / 12 (see photo), Format area: max. 420 mm, Bundled page: min. 100 mm, Unbound page: without limitation, Performance: 300 – 700 pieces / hour (depending on the product and the operator)

CRAMMED FEEDING UNIT, reconditioned, This unit can be synchronized to feeding screw from buffer silo and horizontal screw in extruder to grant a uniform, continuous feeding, for light scraps, mounted on a 130 mm extrusion line, totally reconditioned, possible addition of mastebatch feeder, availability: in stock, conditions: reconditioned, type: for up to 700 kg/h extruders

impression count 143 MÄ°O, Sheet-fed offset press - Printing units: 5 + lack unit. Perfecting 2-3/5-0, High pile delivery Per requirement Kw 00 approx, Weigh 49.350 Kg. circa, Accessories included:, - Steel plate on feeder, - Stream feeder with vacuum belts, - Preset (autom. paper size and thickness setting), - Electronic double sheet detection, - Electromechanic double sheet detection, - Electronic side lay control, fotoelectronic and akustic, - Anti-static on feeder and delivery, - RCI machine control and diagnosis by monitor console /self diagnostic, control and monitor console; remote inking; dampening; axial, circumferential and diagonal register control with light pen; day light illuminator and memory card for job memories, - ColorPilot D- quality control, - APL™ automated plate changing, - Rolandmatic continuous dampening system with alcohol metering; cooling and re-circula ...

Pallet lift table for industrial and Euro pallets, lifts whole pallets of frozen blocks to an ergonomic working height, enabling quick and injury-free operation for the machine operator., Pallet lift table for industrial and Euro pallets, Load capacity: 1,000 kg, Dimensions / weight: L x B x H: 1.850x1.230x2.180 mm, Weight: 520 kg

Complete overhauled Amandus Kahl pellet press. The C35-780 pellet press itself has recently been overhauled; Full documentation of all new parts is available, one of which can be seen in the photos. The last 2 pictures of the Amandus Kahl pellet press in the factory were taken before overhauling and disassembling for sale. Specifications: Brand and type: Amandus Kahl C35-780 pellet press Amandus Kahl C35-780 pellet press with 110 kW electric motor Specifications: Brand/type: Amandus Kahl C35-780 Version: pellet press with base plate Motor power: 110 kW Year engine: 2024 Engine condition: virtually unused Press components overhaul year: 2024 Sawdust capacity: 2.5 – 3 tons/hour Biomass capacity: 3 tons/hour Bran capacity: 3.5 – 4 tons/hour Straw capacity: 2 – 2.5 tons/hour Features: New 110 kW electric motor Electric control cabinet with emergency stop Full elec ...

Collar shelving, single-sided, 3 m height, low-1, 20 m, 750 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.295.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 3,000 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 750 kg = 3,000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!

Collar shelving, single-sided, 3.5 m height, 1, 20 m arms, 750 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.350.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 750 kg = 3000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!

Dematic Heavy duty Belt Conveyor GF 1520-760-650 RA2027 Technical data: Conveyor length (NL): 1520 mm Framework width (NB): 760 mm, 1110 mm with motor and movi mot belt width (GuB): 650 mm height (BH): 140 mm support feet: optionally available Conveying speed (v m/s): adjustable between 0,025 and 0,883 m/s with frequency converter Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Feature: Massive design, belt run surface metal instead of wood Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 1520 Nominal / outside width in mm: 760, 1110 Belt width in mm: 650 Driven: YES Engine type: SEW Movi-Mot KW: 0,55/S1 Conveyor speed m / s: freely adjustable, 0,025 - 0,883 scope of delivery: without supports and side guides, includ ...

Telescopic belt conveyor Kannegiesser 4750+800-885-750 RA1957 Base part with one pneumatically retractable and extendable telescopic elements. The telescope can be extended up to 5550 mm Length base part: 4750 mm Width base part: 885 mm Height base part: 270 mm, ftontpart: 400 mm Extension: 800 mm Total length: up to 5550 mm Band width: 750 mm Belt speed: adjustable via frequency converter Nominal voltage: 3 x 400 VAC + PE Frequency: 50 Hz Nominal consumption: 0.75 kW Special feature / accessories: 2x light barrier 1x Pneumatic maintenance unit 1x Pneumatic Valve 1x Pneumatic cylinder Optionall available: Supports Side guides one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 5550 ( 4750 + 800 ) Nominal / outside width in mm: 885 Belt width in mm:  ...

Face plate Pagus Outer Ø: 700 mm Bolt circle Ø : 150 mm Bore Ø: 95 mm flange Ø: 195 mm used ! Dimensions: 700 x 700 x 113 mm

Saw blade for metal circular saw, segment saw blade WMW Ø 710 mm tooth 6 96 teeth tooth 6 width: 4.0 mm hole holder inner diameter: 80 mm bolt circle of the 4 holes: 160 mm Dimensions: 710 x 710 x 4 mm,

Headers – John Deere 730FD Manufacturer: John Deere Model No.: 730FD Year of manufacture: 2018 Model year: 2019 Working width: 9,100 mm Net weight: 3,344 kg Serial number: 1H0730FDAJ0805002 Type: Draper Cutterbar Transport trolley – Ziegler SWW-4WT Manufacturer: Ziegler Model No.: SWW-4WT Year of Make: 2020 Type: Cutterbar Trolley Permissible. Total weight: 6,000 kg Front axle load: 3,000 kg Axle load rear: 3,000 kg Version: 4-wheel John Deere 730FD (9.1 m) cutting unit including matching Ziegler SWW-4WT transport trolley, built in 2020. Auction-ID: 04L-N1Y-1

\" Fetra Tool Trolley / Table Trolley 1200 x 700 mm with Cabinet Compartment Stable industrial table trolley of the Fetra brand in heavy version. Equipment: • Upper loading area approx. 1,200 x 700 mm • Lower shelf • Side handle • 4 swivel castors • Side cabinet compartment with door • Steel frame construction Condition: Used with clear workshop marks. Plates with signs of wear and dirt. Closet door available. Sale without content. Loading area: approx. 1,200 x 700 mm Total height: approx. 920 mm Load capacity: 1,200 kg Type: steel construction Colour: blue / white \" Auction-ID: A7-46417-371

Kragarmregal, one-sided, 3m height, 1.20m arms, 750kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 staenders 1,295.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf divider on one side approx. 3,000 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable shelf arms carrying ability at load centre 600mm 750 kg per arm / 2250 kg per staender at 4 staenders per arm level 4 x 750 kg = 3,000 kg with laengs and diagonal connectors e = 1300 mm with a row of shelves of 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! ; New

Kragarmregal, one-sided, 3.5m height, 1.20m arms, 750kg per arm - New ware - : Price from location incl. loading! 1 shelving unit with 4 pcs 1.350.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: shelf divider on one side approx. 3500 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable helving arms carrying ability at load centre 600 mm 750 kg per arm / 2250 kg per staender with 4 stems per arm plane 4 x 750 kg = 3000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves with 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New

Collar shelving, double-sided, 3, 50 m height, low-1, 20 m, 750 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR1.900.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided 3, 50 m high, hot-dip galvanized IPE 160 / 100 with each 2 x 3 verstellb. Poor 1.20 m, 750kg load capacity per arm with associations about 1.30 m Shelf stand double-sided approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!

Manufacturer: TREIF Type: PUMA CE 700 EB Product holder with 45 catchers / teeth / for PUMA CE 700 EB, Art. No. 124777 Dimensions: L 180 x W 185 mm Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Hexagon bolts: M20 700 kg -Sizes/number: M20 x 65 to M20 x 160, see photo parts list -Quality: 8.8 black or galvanized -Manufacturer: various -Price: complete -Total weight: 700 kg

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: unused conveyor belt transport belt -Width: 780 mm -Length: 1700 mm -Thickness: 1 mm -Transport dimensions: Ø 80 x 780 mm -Weight: 0.8 kg

Merlin Gerin Circuit Breaker compact C1001 N circuit breakers from 1996, 1 available. Ui 750 V / Uimp 8 kV Price: 2.500 €, Manufacturer: Merlin Gerin Model: C1001 N compact Type: Circuit Breaker / Motor Circuit Breaker Rated voltage [V]: 750 Rated surge voltage [kV]: 8 Year of construction: 1996 Dimensions [LxWxH]: – Weight [kg]: 177

Used rear wall grille for pallet racks - approx. 1,500 x 2,780 x 30 mm Used lattice back panel from a pallet rack in very good condition. With this lattice rear wall, you can secure walkways and driveways behind a pallet rack against falling stored goods. However, they can also be used for other applications, such as safeguarding machines or workplaces. These grids are also often used to demarcate storage areas or picking stations. Properties: - Used back wall grid for pallet racks - For securing running areas - Dimensions: 1,500 x 2,780 x 30 mm - Mesh size: 45 x 45 mm - Frame painted in blue - In very good condition - Available or ready for pick-up by arrangement Properties: Frame color: blue Grid: galvanized Mesh: 45 x 45mm Dimensions: Height: 1,500mm Width: 2.780mm Depth: 30mm

KENO SLP - Drum shafts - length 885 mm - max. load 750 kg - diameter 61 mm Properties: - Drum shafts for cable drum rack - To accommodate the cable drum - Length: 885 mm - Diameter: 61 mm - Payload: 750 kg - Surface hot-dip galvanized Scope of delivery: - Drum shaft: 1 pc. Properties: Length: 885mm Diameter: 61mm Payload: 750kg Surface: hot-dip galvanized Scope of delivery: Drum shaft: 1pc.

Clamping angle Clamping area 745 x 745mm each Footprint 745 x 500mm See pictures

Linear guide rails with carriage PAGUS 700 x 43 x 37 mm ( 700x43x37mm ) carriage 190 x 25 mm used, tested ! Dimensions: 700 x 43 x 37 mm

Stainless Steel Control Box, Control Cabinet PAGUS 600 x 245 x 775 mm ( 600x245x775mm ) with control panel SIEMENS Operation Panel Coros OP 15-C1 6AV3515-1MA20-1AA0 SIEMENS 6ES7 214-1AC01-0XB0 6ES7 223-1HF00-0XA0 Dimensions: 600 x 245 x 775 mm

Electronic Module, Power Supply SIEMENS SIMATIC S5 ( SIMATICS5 ) 6ES5951-7LB21 6ES5 951-7LB21 Dimensions: 310 x 200 x 65 mm