7 axis used for sale

Bacterial removing separator (Bactofuge). Self cleaning. Machine comes with the bowl, motor (22 kW), motor cover, base plate, feet, desludge cyclone, control panel (original Alfa Laval), OWM valve with waterbox (original Alfa Laval), all inlet/outlet pipes, service tools for maintenance including pressing tool. Instruction manual available., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 15.000 liter per hour, Bowl speed: 4.950 rpm, Motor: 22 kW - 380 V - 60 Hz - 1.750 rpm - 40 A, Dimensions: 180 x 130 x 175 cm, Weight: 2.130 kg

2 x Battenfeld injection moulding machines type: TM 180/750 BJ 2010

Refrigerated counter Coldline Master GN 2 for fast and flexible application Model No.: TS13/1M-760 Stainless steel version Cooling range - 2 to + 8°C adjustable Convection cooling Device is plug-in, 2 doors Connection 230V Dimensions: 1300 x 680 x 860 mm, WxDxH Used device

B&A REF: 9235 TON: 320 SCREW DIAMETER: 55MM SHOT WEIGHT: 434 STROKE VOLUME: 474CM3 INJECTION PRESSURE: 1650AR PLATEN SIZES: 1040 X 1040MM DBTB: 720 X 720MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 800MM MOULD OPENING STROKE: 600MM MAX DAYLIGHT: 1400MM EJECTOR STROKE: 250MM CONTROLS: SELOGICA TOUCH CORE PULLING: 1 AIR VALVES: 1 MOTOR: ALL SERVO DRIVES SCREW DRIVE: ELECTRIC

B&A REF: 9289 TON: 320 SCREW DIAMETER: 60-35-30MM SHOT WEIGHT: 607H / 132P / 97S STROKE VOLUME: 644 / 144 / 106CM3 INJECTION PRESSURE: 2000 / 2000 / 2500 AR PLATEN SIZES: 1040 X 1040MM DBTB: 720 X 720MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 700MM MOULD OPENING STROKE: 700MM MAX DAYLIGHT: 1400MM EJECTOR STROKE: 250MM CONTROLS: SELOCIA TOUCH CORE PULLING: 3 AIR VALVES: 2 MOTOR: SERVO HEATING CAPACITY: 22 + 7.7 + 7.7KW ROBOT INTERFACE: EUROMAP 67 ROBOT: MULTILFT SELECT 15KG QUER SCREW DRIVE: ELECTRIC HOT RUNNER: 18 ZONE ACCYMULAQTED: 6

Panel saw Type: K 740 S Manufacturer: Felder Year: 2023 Cutting length: 2500 -3700 mm Formatting sliding table "X-ROLL" Cutting width: 800 – 1250 mm Cutting height: 140 mm Control unit: "Power-Drive" Machine in very good condition, under power Find more here - / Contact us at -

for spare parts. Machine is out of service. Processor card removed

Baguette tray 780x580 mm 8 longitudinal troughs NEW! Made of aluminumOuter dimensions : W.: 780 mm, D.: 580 mm,  H.: 40 mm Details see picture

Sheet metal cleaning machine KD Putz for 78 cm traysProduct descriptionManufacturer: KD PutzCondition: used, functional, baker's conditionMaterial: stainless steel claddingWith emergency stop switchOn castors, mobileFor 58 x 78 cm trays, 2-edge on the short sideBack outputExterior dimensions: width 115 cm, depth approx. 88 cm, height 104 cmDetails see pictures.

Croissant slicer & wrapping machine Fritsch CTR 700/30 Product description Manufacturer: Fritsch Type: CTR 700/30 Year of construction: 2000 Condition: used, cleaned, functional Used Fritsch CTR system Incl. various rollers Connected load: 3x 400 V / N / PE / 0.5 kW The machine we have connected electricity and air. Unfortunately, there is not enough bar. Therefore, a technician needs to look for details see pictures.

Manufacturer : NBSType : 79Q540Stainless Steel 3PE AC 400V 4.0A Cup B:240cm D: 75cm H: 140cm With Multiple Knife BlockSee Picture

Dough Scale Running Weight Riser Model 700 NEWHomber : KircherModel : 700Type : TWComplette Tube construction made of stainless steel in material 1.4301.Main, secondary scale and connecting partsalso made of stainless steel in material 1.4301.Max 6kg Min. 250gCalibratedDetails see picture

Baguette tray 780x580 mm 7 longitudinal troughs  NEW(5 pieces )Made of aluminium 1.15 mmOuter dimensions : W.: 780 mm, D.: 580 mm,  H.: 40 mm Details see picture

Baguette tray 780x580 mm 9 transverse recesses  NEW(5 pcs)Made of aluminium 1.15 mm with round cornersOuter dimensions: W.: 780 mm, D.: 580 mm,  H.: 35 mm Details see picture

Baguette tray 780x580 mm 9 transverse troughs  NEW(5 pieces )Made of aluminium 1.15 mmOuter dimensions : W.: 780 mm , D.: 580 mm ,  H.: 40 mm Details see picture 

Manufacturer: Ryobi Model: 756 Year: 2006 Size: 53x75cn Counter: ca. 66 mio Equipped with: Semi Auto Plate Change Ryobimatic Dampening AAC (Aqua automatic control system) Ryobi PCS-G Remote Console Ryobi PDS-E PQC Technotrand Alpha D 20 Grafix Powdering All Auto wash up device

Cutting width: 780 mm Cutting height: 1080 mm Cut control system with display Programmable back gauge positions Motorized back gauge Hydraulic clamp Air table Optical cutting line Light curtain safety system Fully automated operation Side tables

RICOH Pro C 7200 X (Heidelberg Versafire EV) year 2019 4 colours + 1 colour white and clear colour total approx. 8.5 million Banner max. format 700 x 330 mm vacuum feeder Finisher controller EFi Fiery E-46 a in production good condition

band width: 150 mm band length: 3500 mm band speed: 30 m/sec Scheiben-Ø: 400 mm grinding feed: 0 - 5 m/min work piece revolutions: 0 - 140 U/min power capacity - workpiece power: 2,2 kW grinding diameter: 100 - 600 mm clamping length: 6000 mm bed length: ca. 8000 mm voltage: 380 V / 50 Hz motor speeds:: 1450 U/min power capacity: 15 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 8,6 x 2,6 x 2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Size: 1360 x 1200 mm Equipments: Fully automated palletizing of loose stacks and solid containers at a speed of up to 1,800 stacks/hr Automatic Palletizing product infeed via accumulating conveyor Pallet dimensions: 1360 x 1200 - 1000 x 800 travel stop for dropping of very smooth products pallet removal in moving direction Pallet sizes 1,360 x 1,200 or 1,000 x 800mm Speed 30 Stacks/min

gebr. Band Saw HEMA UH 700 YOC 1986 Motor power 3 kW Roller diameter: 700 mm Max. cutting width: 680 mm Max. cutting height: 480 mm Saw blade length: 5,150 mm APA (Panhans) roller guide top + bottom Precision table swivel device with handwheel and rack Engine brake incl. 14pcs. new band saw blades! The machine was completely repainted. The treads of the two wheels have been completely renewed (newly vulcanized). In addition, the machine was restored.  The drive belts have also been replaced. Extraction connection: D 125 mm Dimensions: approx. 129 x 86 x 230 cm (W x D x H) Weight: 580 kg

General SKU327X688 MakeM. Roth LocationBarneveld CEcheck Type735 l Pressure Working pressure4 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume735 Ltr. Motor0.25 KW Vacuumcheck Specified Features - Stirring vessel MaterialStainless steel 1.4404 (316L) Closed stirring vesselcheck Capacity735 l. Vessel sizesø 800 x 1600 mm Dished bottomcheck Manholecheck DN400 Top connectionscheck Outletcheck DN25 with valve Max. temperature144 °C With propellor stirrercheck Motor0,25 kW, 415 V, 1355 rpm, (Ex) Speed mixing shaft75—500 l./min Information No.B650 Year of construction2008 Mounted on legscheck Floorspace0,80 x 0,80 m Total height2,60 mStirring vesselsM.rothStirring vessels > Stirring vesselsBrand > M.roth What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any  ...

General SKU327X687 MakeM. Roth LocationBarneveld CEcheck Type735 l Pressure Working pressure4 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume735 Ltr. Specified Features - Stirring vessel MaterialStainless steel 1.4404 (316L) Closed stirring vesselcheck Capacity735 l. Vessel sizesø 800 x 1500 mm Dished bottomcheck Manholecheck DN400 side manhole Top connectionscheck Outletcheck DN25 with pneumatic valve Max. temperature144 °C Without motorcheck Information No.B654 Year of construction2008 Mounted on legscheck Floorspace0,80x1,00 m Total height2,40 m Weight430 kgStirring vesselsM.rothStirring vessels > Stirring vesselsBrand > M.roth What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnev ...

General SKU327X680 LocationBarneveld CEcheck MakeIlmvac Pressure Working pressure0.0005 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume63000 Ltr. Motor2.4 KW Specified Features - Vacuum pump MaterialNickel alloy (201) 2.4068 Pumpcheck vacuum Number of pumps:1 Capacity70 m³/h With motor2,40 kW, 400 V, 1365—1440 rpm InletDN35 OutletDN35 Information Type321022 / U 4.70F/K Mach.No.113807 Year of construction2011 Floorspace0,80 x 0,37 m Total height0,30 m Weight60 kgVacuum pumpsIlmvacPumps > Vacuum pumpsBrand > Ilmvac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

diameter range 5 mm shaft length under head 70 mm max. cut-off length 88 mm output pieces/min 500

bushing cut-off diameter range 6,5 mm number of dies 8 number of stations (incl. cut off) 9 cutting length 6-10 mm plane of stroke 123 mm output - pieces/min 150

Product material: LSR, ejector stroke: 150mm, operating pressure: 250bar, clamping force: 750kN, min. tool installation height: 250mm, opening stroke: 375mm, tie bar spacing X/Y: 320mm/320mm, max. platen dimensions X/Y: 490mm/490mm, max. injection volume: 187.5cm³, injection force: 145kN, max. injection pressure: 1150bar, screw diameter: 40mm. Machine dimensions X/Y/Z: approx. 4000mm/1850mm/2000mm, weight: approx. 3100kg. Including two dosing units. An on-site inspection is possible.

Servo motor, gear motor, electric motor, three-phase motor -Manufacturer motor: Bautz type M256D-ON101-7000-0-EC -Voltage: 330 V. -Torque: 0.53 Nm -Speed: 5800 rpm -Gearbox manufacturer: Neugart PLE 60 -Translation: i = 3 -Shaft: Ø 14 x 30 mm -Design: B14 -Price: per piece -Number: 3 pieces -Dimensions: 260/55/H80 mm -Weight: 2.4 kg

OMGA Radial 700 Radial Saw Cutting width 90° max 700mm Cutting height max 110mm Cutting deck adjustable in two planes Saw speed 3000r.p.m 2.61kw main motor Pneumatic feed of the cutting deck Net price

Servo motor, gear motor, electric motor, three-phase motor -Manufacturer engine: Bautz type M404D-B0101-7000-0 -Voltage: 330 V. -Torque: 0.95 Nm -Speed: 6200 rpm -Holding brake: 2 Nm -Manufacturer gearbox: Neugart WPLE 60 -Translation: i = 3 -Shaft: Ø 14 x 30 mm -Design: B14/angle -Dimensions: 260/165/H105 mm -Weight: 5.2 kg

Radial fan, dust extraction fan, fan, extraction, dust blower -Manufacturer: Ferrari, Radial fan in soundproof container -Container manufacturer: Wagner Lufttechnik -Engine: Siemens, 11 kW -Speed: 1460 rpm -Pressure and volume performance: unfortunately not visible -Fan wheel: Ø 700 mm -Connection input: Ø 790 mm -Connection output: 700 x 500 mm -Quantity: 2 blowers available -Price per piece -Dimensions: 2130/2135/H2480 mm -Weight: 1325 kg

End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool, cutter head -Handover: in its current condition as inspected -Cutting board: partially slightly damaged, see photos -Reversible plates: mostly missing, see photos -Type: 45-PP-160-140-10 Ø 160 mm 3 pieces -Type: 45-PP-125-113 Ø 125 mm 1 piece -Type: 45-PP-125-113-9 Ø 125 mm 1 piece -Type: 90-PP-100-22-8 Ø 100 mm 2 pieces -Type: 75-PP-080-37-6 Ø 80 mm 1 piece -Type: 75-PP-080-37 Ø 80 mm 1 piece -Dimensions: 395/295/H145 mm -Weight: 29 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Industrial trailer with: 1-axle turntable steering -4 roller conveyors, rollers: Ø 65 x 365 mm -Load capacity: max. 6800 kg -Tires: solid rubber -Trailer hitch -External dimensions: 4760/2730/H585 mm -Own weight: 1100 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 700mm -Cross section: 140 x 50 mm -Recording: 400 mm (see sketch in the photos) -Transport dimensions: 845/945/H140 mm -Weight: 186 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Conveying length: approx. 2260 mm Execution: stable -Drive motor: SEW Eurodrive 1.0/4.0 kW -Speed: 690/28 2730/109 rpm -Case: stainless steel -Conveyor screw: Ø 150 mm -Conveyor screw pitch: 130 mm -Trough width inside: 170 mm -Screw: steel/stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2870/760/H500 mm -Weight: 284 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Execution: stable -Drive motor: SEW Eurodrive 1.0/4.0 kW -Speed: 690/28 2730/109 rpm -Case: stainless steel -Conveyor screw: Ø 150 mm -Conveyor screw: 130 mm -Trough width inside: 170 mm -Screw: steel/stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2240/760/H520 mm -Weight: 278 kg

Ball screw with nut, Transroll spindle, ball screw nut, screw spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Steinmeyerr, precision ball screw -Shaft: Ø 15.5 mm -Thread length: 770 mm -Price: per piece -Number: 2 piece -Dimensions: 950/45/H90 mm -Weight: 1.8 kg/piece

Air outlet, ventilation duct, ventilation flap for ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, shutter flap, non-return flap -Slat fan: without fan, air outlet, lateral. Slats adjustable -Connection opening: Ø 800 mm -Dimensions: 1130/1130/770 mm -Weight: 135kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate: clamping plate -Width: 1000 mm -Total length: 7060 mm, clamping area 6260 mm -Plate height: 235 mm -Groove width: 22 mm -Groove spacing: 125 mm -Dimensions: see drawing in the photos -Transport dimensions: 7060/1000/H235 mm

Lifting table, lifting platform, lifting platform, car lifting platform, scissor lifting platform, cleaning bridge, scissor bridge, lifting device, material lifter, lifting device -Manufacturer: Schmidt Handling, lifting device -Load capacity: 100 kg -Lifting height: 725 mm -Platform: 545 x 285 mm, tiltable -Dimension: 400/380 / H1260 mm -Weight: 205 kg

Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine -Manufacturer: Bitzer, Compressor Motor Compressor -Type: BHS 752 -Power: 4 kW / 1450 rpm -Volume flow rate: 28.11 m³/h -Max. operating pressure: 24.5 bar -Dimensions: 640/450/H425 mm -Weight: 131 kg

Universal milling head, milling adapter, milling extension, angle milling head, electronic spindle -Spare part comes: from a machining center BJM type ALBZ-145 -Number: 1 piece angle milling head -Recording output: HSK -Milling head: completely rotatable/pivotable -Transport dimensions: 1080/380/H435 mm -Weight: 246 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-slot plate comes from: a Fluri milling machine type 14SE -Width: 720 mm -Length: 1200 mm -Height: 235 mm -Plate thickness: mm -Plate: Solid -Groove width: mm -Dimensions: 770/1200/H235 mm -Weight: 906 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 0 A - 75 A -Installation dimensions: LxWxD approx. 66x138x170 mm -Number: 2x available -Price: per piece -Dimensions: 72/144/H170 mm -Weight: 1 kg

Clamping plate with pneumatic cylinder, centering table, centering device, plate field, welding table, welding table, plate boring machine -Clamping plate with: 24 pneumatic cylinders -Material: aluminum -Width: 775 mm -Table length: 1600 mm -Height: 180 mm -Dimensions: 1600/775/H180 mm -Weight: 250 kg

Respiratory protection filter, pocket filter -WxHxL: 592x490x360 mm: AUT-Pak C86-8 KK: 1 piece -WxHxL: 592x287x360 mm: AUT-Pak C86-8 KK: 1 piece -WxHxL: 592x592x500 mm: AUT-Pak C86-8 KK: 3 pieces -WxHxL: 592x287x500 mm: AUT-Pak C86-8 KK: 1 piece -WxHxL: 287x592x500 mm: AUT-Pak C86-4 KK: 1 piece -WxHxL: 490x592x360 mm: AUT-Pak C86-6: 4 pieces -WxHxL: 592x287x360 mm: C-8T-K: 5 pieces -WxHxL: 592x592x500 mm: AUT-Pak C86-6: 9 pieces -WxHxL: 592x592x600 mm: HTH 76600/6: 4 pieces -WxHxL: 592x287x600 mm: HTH 72600/8: 4 pieces -Price: complete -Number: 33 pieces -Weight: 45 kg

Furniture Corlette, roll containers, stacking boxes, transport containers, order picking trolleys, sofa rollers, upholstered furniture trolleys, rolling trolleys, upholstered trolleys -Width: 2060 mm -Depth: 750-1020 mm -Height: 1160 mm -Load capacity: ? -Swivel castors: 4x -Thanks to the folding technology: Move into each other and create space in no time -Quantity: 9 pieces available -Price: per piece -External dimensions: 2060/750/H1160 mm -Own weight: 23.5 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-grooved plate comes from: from a milling machine -Travel: approx. 1200 mm -Width: 700 mm -Length: 2000 mm -Height: 510 mm -Plate thickness: mm -Table height: mm -Plate: is solid -Groove width: mm -Dimensions: 3030/850/H510 mm -Weight: approx. 1200 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Siemens: Sinamics Active Line Module 6SL3130-7TE23-6AA3 -Max. Power: 36 kW -Input 3 AC 380-480 V 50/60 Hz -Output DC 600 V 60 A 36 kW -Siemens: Sinamics Double Motor Module 6SL3120-2TE21-0AA3 -Input: DC 600 V -Output: 3 AC 400 V 9 A/9 A -Dimensions: 200/490/H270 mm -Weight: 16 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 600 x 320 mm -T groove width: 12mm -T grooves: 5 pieces -Equipment: rotatable, pivotable, tiltable -Foot mount: 325 x 190 mm -Number: 1x tables available -Price per piece -Dimensions: 800/300/H240 mm -Weight: 70kg