7 axis used for sale

Yamato 714 Multihead Weigher, Fully Stainless Steel | Rigidized |, Looking for a high-performance weighing solution for frozen or hard products? This Yamato 714 is a fully stainless steel, rigidized multihead weigher built for demanding production environments., Its flat feed chutes make it ideal for deep-freeze and hard items, preventing sticking or jamming. Optionally, we offer versions with angled chutes for lighter products such as vegetables or flat chutes for frozen products., The machine has been fully overhauled, thoroughly inspected, and is ready for immediate operation., ---------------------------------------------------------------, Specifications – Yamato 714, Weighing Heads - 14 heads, Weighing Range ~20 g up to 3,000 g (single dump); multi-dump possible, Speed - Up to 90 weighings per minute (product dependent), Chute Type - Flat chutes (ideal for frozen/hard product ...

Only 5 hrs. Traded-in from customer who needs more power., Warranty is still applicable., Used Generator Set.; Gross weight [kg]: 1825; Engine: Perkins 1106A-70TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 320

cutting diameter: - mm saw band length: - mm cutting width: - mm table - swivable: ja Grad weight of the machine ca.: 200 kg dimensions of the machine ca.: - m with welding equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- RCI Console - Pallet feeder with suction belt - PIAP Vaccum & Blow System at feeder / delivery - Roland Deltamatic dampening units - TECHNOTRANS beta.c cooling device (water cooled) - Ink temperature control - InkLine - APL plate change - Ink roller wash-up device - Blanket wash-up device - Impr.cyl. wash-up device - Perfecting 2/4 or 6/0 - GRAFIX Drytronic IR Dryer - Powder extraction - GRAFIX Hitronic powder spray - High pile delivery

CINCINNATI MILACRON DART 750 CNC vertical machining center was built in 1999 in the UK by Cincinnati Milacron U.K. Limited. The machine, designed for machining workpieces with a maximum weight of 455 kg, is distinguished by its outstanding precision, efficiency and reliability. The machining process is performed on a large work table with a length of 950 mm and a width of 520 mm, by means of a high-speed spindle and cutting tools taken from a 21-position magazine. High process stability, even during the most intensive challenges, is in turn ensured by an extremely rigid design made of top-quality steel. All this is completed by a CNC controller with dialogue programming. The CINCINNATI MILACRON DART 750 CNC machining center weighs approximately 3500 kg. Technical specifications of the CINCINNATI MILACRON DART 750 CNC milling machine - CNC controller: ACRAMATIC 2100 - number of axes: ...

Key data: 6195 mm, 2935 mm, 565 mm

TECHNICAL DATA: Working Range: X: 4600 mm Y: 2200 Maximum travel: X: 6195 mm Y: 2935 mm Z: 565 mm 5 axes Nesting table 01 Turret tool magazine with 18 slots 01 self-propelled tool changer 10 stops: stroke 150 mm 01 Vacuum pump: 250 m³ 01 Vacuum pump: 500 m³ 01 Laser Pointer Pen Drilling unit (6 kW): 18 spindles for vertical drilling (11+2 X-axis - 6 Y-axis) 02 Double-Sided Spindles for Horizontal Drilling – X-Axis 01 Double-Sided Spindles for Horizontal Drilling – Y-Axis 01 Saw blade unit – X-axis Electrospindle unit (13 kW): Equipped with HSK mount - liquid-cooled Software: CAMPUS V7 PLUS

Universal 750 kg MANIPULATOR: yes Capacity: 750 kg Table dimentions: dia 1000 mm Voltage: 220 volt Weight: 2600 kg

Please refer to Fig. 2 for technical data

Manufacturer: BOGRAMA Model: BSM 750 / 220 / 15 Year of Manufacture : 2005 Type of Machine : Cut and Punch Machine Find more here - / Contact us at -

Upright delivery with pressing rollers Make OMG Model Economic P/700 Year 2006 Speed up to 30.000 Minimum size 100 x 110 mm Maximum size 330 x 700 mm

CNC NUM 760 full cnc visible in our warehouse in Gussago BS Italy

Transnorm spiral helix belt curve conveyor right 90°-750-650 IR1200 RA2437 Technical data: Frame width (NB): 750 mm belt width (GuB): 650 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees decline: 200 mm / 90° = 800 mm / 360° support feet: optionally available Conveying speed (v m/s): 0,35-1,21 Drive: SEW gear motor with movi-mot frequency converter for stepless speedcontroll Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive angle: 90° scope of delivery: including Movimot frequency converter KW: 0,55/S1 Construction year: 2001 B ...

Langguth Deckler+Labeller sysLAN 720+selfLAN 510 Automatic capping and adhesive labeling in one machine Very good condition, straight from production

Type: 7950.5005 Serial number: 6894 1419 2204 0128 Year of constrution: 2022 Content: 650 litres Refrigerant: R290 Temperature range: -2°C to +8°C Power: 230VAC, 50Hz, 215W Dimensions: 830 x 740 x 2050 mm Weight: 121 kg Stainless steel refrigerator with lock

Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible.

Type: 7920.5020 Serial number: 564123733 7127 2312 Year of construction: 2022 Content: 1300 litres Refrigerant: R290 Temperature range: -18 °C to -22 °C Power: 230VAC, 50Hz, 780W Dimensions: 830 x 1480 x 2050 mm Weight: 201 kg Stainless steel freezer with double door and lock

Spiral mixer Capacity: 75 kg flour Kemper Dough capacity: 120 kg Stainless steel bowl Voltage: 380V / 50Hz / 3 N/PE

Spiral mixer Capacity: 75 kg flour Kemper Dough capacity: 120kg Stainless steel bowl Voltage: 380V / 50Hz / 3 N/PE

Spiral dough mixer 120 kg dough Diosna Power in flour: 75 kg Bowl contents: 180 liter Digital control keyboard with program memory Cover with safety switch Castors with brakes Voltage: 400V / 50Hz / 3 N/PE Electric power: 6.5kW

Width 76 cm Year of construction 2009 Mobile stacking delivery for marking-free laying Banding display with max. 3 panels Vibrating device Pressing station max. infeed width 760 mm - 1 panel max. infeed width 235 mm - 3 panels Small format device for stacking height 3 - 20 mm Output up to 600 stacks / h Steel / HD - Interface / Interface Price on request. Worldwide delivery & installation.

Transnorm conveyor belt GF 16600-700-600 RA2455 Technical data: Conveyor length (NL): 16600 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,35 Drive: SEW gear motor, R27 DT90S4/TH Electrical data: 50Hz V380-500, kW 0,5 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 16600 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s ...

Used Hugart DS 7500 packaging machine. New: 2009. The Hugart DS 7500 is a rotary machine with all stations installed around a rotary table equipped with 24 sockets. The machine operates fully automatically and is designed for dosing and packaging a full range of food processing industry products in plastic or aluminium foil cups, sealed with an aluminium heat-sealable lid. The device has a smooth adjustment of capacity from 3,500 to 7,500 packages per hour and a dispenser from 0.05 to 0.15 l, or 0.10 to 0.5 l. The equipment of the DS 7500 machine, designed for packaging dairy products in containers (e.g. ø 95 mm), is suitable for automatic packaging and sealing with aluminium heat-sealable plates. Technical data: - Maximum dispensing capacity of the device: 7,500 containers/hour. - Air consumption 45 m³/h. - Nominal compressed air pressure 0.6 to 0.8 MPh. - Power consumpti ...

Transnorm belt curve conveyor left GKF 90°-700-500-IR450 - NEW RA2313 Technical data: Frame width (NB): 700 mm Frame width with Bearing cover and motor: 900 mm belt width (GuB): 500 mm height (BH): 220 mm height with motor (MH): 350 mm Inner radius (IR): 450 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,67m/s Drive: SEW motor motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2020 Optionally available: Supports Frequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2020 condition: new Nominal / inner radius in mm: 450 Nominal / outside width in mm: 700 Belt width in mm: 500 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: 0,67 scope of delivery: without suppor ...

pressure: 30.0 t stroke: 200 mm table surface area: 775 x 190 mm column travel between the guideways: 775 mm ajustment speed: 7.5 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 3.0 kW weight of the machine ca.: 400 kg. dimensions of the machine ca.: 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: 1 feed speed 1 working speed 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side -  ...

Manufacturer: Mori Seiki Model NLX 2500 Y/700 Top condition Year of construction 2012 only approx. 6000 operating hours incl. 12 antr. WZ Holders + 17 Static WZ Holders Quick-change system from EWS Hollow clamping device KITAGAWA BB210A821 + KITAGAWA SS1881K21 for the main spindle Coolant system with increased pressure 5 bar Hinged belt conveyor, right ejection Integrated part catcher for main spindle I/F for bar replenishment, LNS Double foot switch with protective cover Signal light (red, yellow, green) Total Counter Workpiece counters EU Tool Holder Package SAUTER BMT60 (T32259, T32260, T32261, T32262) SKM253 MSQP Transformer 45.0 kVA 15 bar Grundfos pump incl. Hydac Filter Cantilever length for driven tools 100 mm (limited Y-axis travel) (Y, SY, SMC)

Mubea Hole Punch Model KL 750 Optima Year of manufacture 1990 fully functional Hebqowr Dk Rjxim Iqsfb Max. punching force 750 kn Triggering stroke via foot switch With very extensive tools, see photos

Max. profile width at 180°: 220 mm Max. profile height: 210 mm Angle adjustment range: 30°-180° Welding level: 340 x 300 mm

B&A REF: 9024 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 343 STROKE VOLUME: 377CM3 INJECTION PRESSURE: 1892AR PLATEN SIZES: 710 X 660MM DBTB: 520 X 470MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 150MM CONTROLS: MC6 CORE PULLING: 2 AIR VALVES: 2 HEATING CAPACITY: 17.7KW ROBOT INTERFACE: EUROMAP 67 ROBOT: GIEGER TECNOMATIC SCREW DRIVE: ELECTRIC HOT RUNNER: 12 ZONE

GENERAL Project No.: 905817 Quantity: 1 pcs. Manufacturer: DMG MORI Type: MillTap 700 Control: Siemens 840 D solutionline Year of Make: 2020 Condition: Used machine Approx. (hrs): 8038 Spindle Approx (hrs): 1166 Program run approx. (hours): 1389 DESCRIPTION MILLING Travel in X 700 mm Travel in Y 420 mm Travel in Z 380 mm Max. rapid traverse speed in X/Y/Z 60/60/60 m/min Max. acceleration in X/Y/Z 10/10/18 m/s2 Direct displacement measurement system X/Y/Z Tool holder BT 30 Max. speed milling spindle 24000 1/min Max. power at ED 10-40/100% 16.3/6 kW Max torque at ED 10-40/100% 48/30 (78 max) Nm Disc tool magazine 25 stations Chip to chip time 1.7 s Machine table 840x420 mm OTHER EQUIPMENT IR Workpiece Probes Tool measurement by means of a probe Splash protection cladding with fully encapsulated working area Oil/Emulsion Mist Extraction System  ...

Dematic conveyor system Accumulating roller 15000-750-690 RA2458 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 15000 mm Condition: good (used) Roller width (RB): 690 mm Nominal/outer width (NB): 750 mm Accumulation slot size: 750 mm Storage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.35 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side gui ...

5-axis CNC machining center Type: UMC-750 Manufacturer: Haas Year: 2020 X: 762 mm Y: 508 mm Z: 508 mm Tool magazine 30+1 positions Spindel taper: ISO 40 Max spindle speed: 12000 rpm Chip conveyor Machine in good condition, under power. Find more here - / Contact us at -

: 0760 mm : 450 mm : 500 mm : 900x450 mm : BBT 40 : 10.000 U/min Motor Capacity: 7,5/11 kW max. table load: 850 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Battery Mould with 6 pockets Year of manufacture: 2017 - Pocket dimensions: 7.00 m x 3.0 m - 6 pockets - 2 outer walls - 3 butterfly formwork inserts - Suitable for precast wall thicknesses: 15 cm to 30 cm - Almost like new, as it was only used for a short time - Mechanical tensioning system - Electric drive units - Complete accessories

Maximum Trimmed Size: 355 × 340 mm, Minimum Trimmed Size: 120 × 75 mm, Maximum Folded Size: 360 × 350 mm, Minimum Folded Size: 130 × 105 mm, Included: Integrated MBO Folding Unit with Control Console, Equipped with: Central Control Panel with Touchscreen and Function Keys, Hohner Stitching Heads, Gathering Station with Multiple Feeders, Folding and Stitching Section by MBO, Three-Knife Trimmer, Delivery Unit with Conveyor and Stacking Table

Dough Sheeter Fritsch Rollfix 700 Bj: 2020 used dough sheeter Fritsch 700 with digital control and automatic reel from 2020 for sale and immediately available in our warehouse in Bielefeld. Dough sheeter Fritsch 700 - Stainless steel dough sheeter Fritsch Rollfix - with reel - With touch display - 65cm belt width - Band length one side 183cm - Year of construction 2020

General SKU383U1044 LocationBarneveld CEcheck MakeNabertherm TypeRS 170/750/13S H2 Pressure Vacuum possiblecheck Main Features MaterialGlass Volume25 Ltr. Max.temp.1300 °C Specified Features - Drying oven Drying ovencheck Vacuum drying ovencheck Max. temperature1300°C Number of compartments:1 Capacity±25 Ltr. Internal diameter115 mm Internal width2380 mm Electric heatingcheck Electric capacity13,5 kW, 400 volt Number of doors:1 With air circulationcheck With fancheck Suitable for nitrogencheck hydrogen With timercheck MaterialHeat-resistant stainless steel 1.4767, Glass Information No.232933 Year of construction2012 Mounted on frameOn wheels With switchcheck Floorspace2,90x1,30 m Total height1,6 m Weight900 kg Extra SpecificationsThe RS tube furnaces can be used for horizontal operation. This professional tube furnace can be optimally configured fo ...

Type: Foodscan Pro 78810 Serial number: 1811200505 Year of construction: 2005 Operating system: Windows Protection: IP65 Power: 100-240VAC, 50-60Hz, 2A Dimensions: 600 x 420 x 800 mm Weight: 56 kg With touch screen control

CNC gantry flame cutting machine Manufacturer: Messer Type: Omnimat P 7000 Year of Make: 1995 CNC Control: Global Control Plus Track width: 7,000 mm 8 x oxy-fuel burner type ALFA 8 x Omnilift 200 Without a running track Without table Without filter Reference Number: R2137

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 700, Control panel: Stainless steel Control box, Controls, Thermomete ...

Demonstration machineThe new briquetting press 70F from Holzprofi impresses with its sophisticated, simple and solid construction.The press is designed for trade and industry.Made in EU ! Technical data:Motor output power 100% ED 7.5 kW Briquette diameter 70 mmPower consumption approx. 4900 W/h Capacity 60 - 80 kg/h Chip bunker 0.75 m³Weight 810 kgWeight briquettes approx. 900 - 1100 Kg/m³Sound pressure level less than 70 dBAdimensions: 2220 x 1200 x 1510 mm

A self-cleaning disc stack centrifuge (disc separator) GEA is available. Drum speed range: 4000-4800rpm, drum diameter: 682mm, max. feed density liquid/solids: 1.1kg/dm³/1.3kg/dm³, drum volume: 125l. An on-site inspection is possible.

Fabricante MORI SEIKI Modelo NLX2500SY/700 Mes / Año 12/2011 CNC MORI SEIKI M730 BM Capacidades Volteo sobre bancada/carro 590/360 mm. Diámetro máximo torneable 460 mm. Longitud máxima torneable 795 mm. Paso de barra 80 mm. Eje Y INCLUIDO Recorridos y avances Recorrido eje X/Z 260/795 mm. Rango eje Y ±50 mm. Recorrido sub-cabezal eje B 734 mm. Avance rápido ejes X, Z, B 30.0000 mm/min Avance rápido eje Y 10.0000 mm/min Avance trabajo ejes X, Y, Z, B 0-5.000 mm/min Cabezal Eje C en cabezal INCLUIDO Indexación eje C cabezal 0.001º Velocidad cabezal 4.000 rpm Número gamas velocidad cabezal 2 Tipo nariz cabezal JIS A2-8 Diámetro paso cabezal 91 mm. Potencia motor principal 18.5 kW Sub-cabezal Eje C en sub-cabezal INCLUIDO Indexación eje C sub-cabezal 0.001º Velocidad sub-cabezal 6.000 rpm Número gamas velocidad sub-cabezal 1 Tipo nariz sub-cabe ...

Screw diameter: 45 mm Injectable volume / Shot volume: 358 cm3 Injection Pressure: 2426 bar Column passage / Bettween tie bar: 720 x 720 mm Thickness of the mould mini /Mold tickness -max: 320 - 725 mm Opening stroke: 730 mm Euromap 12 4 hydraulic cores - 4 corepulling

This SPINNER MT 350/750 was manufactured in 2001. A reliable horizontal turning machine, it offers solid performance for various machining tasks. Consider the opportunity to buy this SPINNER MT 350/750 horizontal turning machine. Contact us for more information.

This Geminis GHT-4 720 x 3000 was manufactured in 1999. It features a maximum swing over bed of 720 mm and a distance between centres of 3000 mm. The main spindle supports a speed up to 1600 rpm with a power of 17/20.5 kW. It includes a Duplomatic turret with 8 tool positions and a longitudinal chip conveyor. Consider the opportunity to buy this Geminis GHT-4 720 x 3000 horizontal turning machine. Contact us for further details regarding this machine.

This 3-axis SPINNER VC 750 was manufactured in 2013. Ideal for precision CNC milling, this machine offers robust performance and reliability. Consider the opportunity to buy this SPINNER VC 750 CNC milling machine. Contact us for more information.

This Johnford SL-70A was manufactured in 2006. A robust horizontal turning machine featuring a swing over bed of 700mm and a swing over cross slide of 540mm. It has a spindle bore of 115mm and a bar capacity ranging from 91 to 102mm, suitable for diverse turning tasks. Consider the opportunity to buy this Johnford SL-70A horizontal turning machine. Contact us for more information about this machine.

This TRUMPF Trulaser 7040 was manufactured in 2007. It features a working area of X=2500 mm and Y=12000 mm, equipped with 2 laser heads and dual 3.2 kW power. Ideal for large-scale CO2 laser cutting tasks. Contact us for more information.

This 5-axis MORI SEIKI NLX 2500 SY/700 was manufactured in 2010, featuring a max swing over bed of 590 mm and a cutting length of 795 mm. It includes Y and C axes, a sub-spindle, and high-pressure coolant system. Capable of handling bar work up to 80 mm, its equipped with a chip conveyor and automatic bar feeder. Consider the opportunity to buy this MORI SEIKI NLX 2500 SY/700 turn-mill centre. Contact us for more information about this machine.

This SELCO WNTR 710 panel saw was manufactured in 2011. Designed for precision and efficiency in panel cutting, it offers robust performance for woodworking professionals. Consider the opportunity to buy this SELCO WNTR 710 panel saw. Contact us for more information.