650 kva used for sale

cutting diameter: 650 mm saw band length: . mm cutting width: 1000 mm Cutting height: 650 mm weight of the machine ca.: 6,4 t dimensions of the machine ca.: m Cutting speeds: 16–170 m/min Working area: approximately 670 mm Material support height: 700 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution  ...

The machine is in good technical condition, testing possible after prior agreement. including a new chip remover

Hand - Swivel bending machine KRAMER type AMS 650 x 1.5Hand swivel bending machine, bending benchYear of construction approx. 1985Working length 650 mmSheet thickness at 40 kg/mm2 1.5 mmUpper beam opening approx. 60 mmBending beam adjustment approx. 0-25 mmBending angle 0-180- Upper beam adjustment via hand crank- Pilot rail for the bending brace- One-piece sharp rail 135Space requirement L x W x H 1200 x 600 x 1100 mmWeight 160 kggood condition; used

Type: OptiDipper 650 Serial number: 87 Year of construction: 2013 Belt width: 650 mm Product height: max 50 mm Filling: min 40 L Infeed conveyor length: 600 mm Outfeed conveyor length: 950 mm Power: 3 x 400V, 50Hz, 1.8kW Dimensions: 3850 x 1400 x 1350 mm Weight: 850 kg

Used dough sheeter FRITSCH, type: Rollfix 600 / 650 EMA 1.6K x 1.4K ALI -In bakery condition- - Computer control with touchscreen - USB and Ethernet interface - Automatic belt travel left - right - Band length: 1.6m and 1.4m - Automatic roller position - Automatic flouring - 100 programs can be stored - 18 degrees of reduction of the rollers - 8 freely programmable special reduction curves - Belts are in very good condition - Condition: Good, everything technically tested and ready for immediate use Specifications: - Roller spacing: 0.3 - 45 mm -El. Connection: 3x 400 V, 50 Hz, 3 Ph, 1.4 kW, 3.4 A - Strip width: 650 mm - Rolling speed: on outfeed conveyor 56m/min. - Weight: approx. 375 kg Viewing and test run are possible by arrangement.

Type: EFR3000/650E Serial number: 1917 Year of construction: 2013 Belt width: 650 mm Frying length: 3000 mm Heating: electric, 90kW Frying time: 25 - 250 sec Power: 3 x 400V, 50Hz, 99kW Dimensions: 6100 x 2350 x 3000 mm Weight: 2750 kg Teflon infeed, hold down belt, sediment removal, circulation pump, oil level control, electric hoists, prepared for CO2 fire extinguisher

Dishwasher Winterhalter GS 650 Energy+ Winterhalter Model: GS 650 - Floor-standing machine, stainless steel version - 3 washing programs - Powerful pump - 1 washing basket - Rinse Pump & Cleaner Pump large tank with Energy+ heat exchanger Connection 400 V, 32A-CEE plug Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Water Delivery Maintenance contract Service Package E-Box for more safety Instruction & Commissioning

Key data: 650 mm, 600 mm, 620 mm

From a current recycling we offer you a CNC machining center from the manufacturer AVIA, type VMC 650 V. Year of construction:2023 Condition: normal signs of wear Hours: Asking price: VHB Original price: 120.000 € Equipment / accessories / other information: x/y/z 650/600/620mm, Table 800x550mm 30 mm tool magazine Asset Manager: M. Vorkötter Phone: 0202-257273152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: The sale is without warranty Subject to prior sale

Swing diameter over bed/cross slide: 650mm/430mm, distance between centers: 3000mm, bed width: 450mm, max. workpiece weight: 1800kg, spindle speed: 2000rpm, rapid traverse: 8m/min, feed rate: 2m/min, quill diameter: 105mm, quill stroke: 225mm, taper: MK5, tool stations: 8. Machine dimensions X/Y/Z: approx. 5300mm/2300mm/2200mm, weight: approx. 7000kg. Documentation available. An on-site inspection is possible.

Key data: 6500 kN, 105 mm

Location is : Latino America !

An old but functional Kallfass shrink-wrapping machine is available. Seal length: 600mm, max. passage height: 260mm, film thickness range: 12µm-80µm, max. belt speed: 12m/min, max. cycle rate: 20/min, sealing frame dimensions X/Y: 800mm/600mm, max. film roll width: 750mm, working height range: 870mm-970mm, tunnel width: 605mm, tunnel height: 400mm, max. film roll diameter: 300mm, max. film roll core diameter: 76mm. Machine dimensions X/Y/Z: approx. 3400mm/1300mm/1450mm, weight: approx. 750kg. The drive motor is taken out but included. An on-site inspection is possible.

Manufacturer: PolyTECH Type: KVD 650 Year of Make: 1995

General SKU279W436 LocationBarneveld MakeDinnissen Type322-365-650 No.120282 Year of construction2012 Main Features MaterialStainless steel Motor3 KW Length365 mm Specified Features - Rotating sieve Rotating sievecheck Sieve sizesDia. 200x365 mm Screw sizesDia. 150 mm Inlet240x250 mm Outlet2x 150 mm With inspection hatchcheck Motor3,0 kW, 400 V, 1415 rpm Speed700 rpm Air purged glandscheck With sieve cagecheck Sieve perforation5x5 mm MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck Total height1,50 m Weight360 kg CEcheck Floor space1,72x0,63 m Extra SpecificationsWith level switch and butterfly valve for outlet.Rotating sievesDinnissenSieves > Rotating sievesBrand > Dinnissen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination world ...

General SKU304M421 LocationBarneveld MakeBartels & Lüders No.4447 Year of construction1963 Pressure Working pressure jacket4 Bar Main Features MaterialStainless steel Volume6500 Ltr. Motor2.5 KW Specified Features - Stirring vessel MaterialStainless steel Closed stirring vesselcheck Capacity6500 Ltr. Vessel sizesdia. 2000x2200mm Dished bottomcheck Dished top sidecheck Manholedia. 500mm Top connections11x Outletdia. 65mm With jacketcheck 650 Ltr Max. temperature150°C With paddle stirrercheck Motor2,5 Kw, 220/380 Volt Speed mixing shaft8,7 - 43 Rpm Information Floorspace2,6x2,6 m Total height3,1 m Weight3680 kgStirring vesselsBartels & LuederStirring vessels > Stirring vesselsBrand > Bartels & Lueder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide --  ...

General SKU357W959 LocationBarneveld MakeApaco TypeAS 650 No.515425 Year of construction2002 Specified Features - Pressure vessel Material finishPolished inside and outside Pressure Working pressure2.5 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume650 Ltr. Pressure2.5 Bar Vacuumcheck Pressure vessels MaterialStainless steel 1.4435(316L) Capacity650 l Vessel sizesDia 950x1000 mm Dished topcheck Dished bottomcheck With covercheck Manholecheck DN500 Top connectionsDN 25 (2x) Outlet1,1/2 Max. temperature140°C Information Total height1,7 m Mounted on legscheck on wheels Floorspace1,2x1,2 mPressure vesselsApaco AGTanks > Pressure vesselsBrand > Apaco AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect th ...

General SKU446W1481 LocationBarneveld MakePink Wertheim GmbH Themosysteme TypeWSD 650-650-129-6 Machine number2002 4712 Pressure Working pressure0.1 Bar Vacuum possiblecheck Working pressure trays4 Bar Main Features MaterialHastelloy Volume350 Ltr. Surface2.53 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housing1.4301 Heating surface2,53 m2 Max. temperature95°C Number of trays6 Tray sizes650 x 650 mm Distance between the trays120 mm With 1 doorcheck Connectionscheck MaterialStainless steel 2.4602 (Hastelloy C-22) Information Year of construction2002 Mounted on framecheck Floorspace1,20 x 1,70 m CEcheck Total height1,90 m Weight1060 kg Extra SpecificationsWith QVF glass condensor bowl, volume 7 l. :Tray dryersPink WertheimDryers > Tray dryersBrand > Pink Wertheim What you can expect from Foeth: -- Machine is in working condition --  ...

General SKU330W1522 LocationBarneveld MakeAro Type650-607 Mach.No.90’ 1747 Pressure Working pressure10 Bar Main Features MaterialStainless steel Specified Features - Centrifugal Pump MaterialStainless steel Centrifugal Pumps Pumpcheck Number of pumps:1 Pneumatic drivecheck Outletdia. 25 mm Information Year of construction1990 Mounted on wheelscheck With switchcheck Floorspace1,30x0,63 m Total height1,80 m Weight300 kg Extra SpecificationsDrum air pressure pump, Festo pressure cabinetCentrifugal PumpsAroPumps > Centrifugal PumpsBrand > Aro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU330W1524 LocationBarneveld MakeAro Type650-607 Mach.No.15’1064 Pressure Working pressure10 Bar Main Features MaterialStainless steel Specified Features - Centrifugal Pump MaterialStainless steel Centrifugal Pumps Pumpcheck Number of pumps:1 Pneumatic drivecheck OutletDia. 25 mm Information Year of construction2015 Mounted on wheelscheck With switchcheck Floorspace1,30x0,63 m Total height1,80 m Weight300 kg Extra SpecificationsDrum air pressure pump, Festo pressure cabinetCentrifugal PumpsAroPumps > Centrifugal PumpsBrand > Aro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

2 Pcs. Weserhütte EB 1.000 x 700/650 mm for sale. Electrical motor included, crusher can be sandblasted and painted.

Size: 1.300 (1.250) x 650 mm - MA220 (380V. / 16A. / 0,6 kW) Magnetic vibrator - With steel wear plates - Included Thyristor controller

CNC Vertical Machining Center HERMLE C 650 U With track control Heidenhain TNC 640 Year of manufacture: 2018 Travel : X 1050 Y 900 Z 600 Speed range : 20 – 18,000 rpm infinitely variable ( HSK 63 ) With the following accessories: NC swivel rotary table Ø 900 mm x 750 mm ( T slots for SRT ) Vertical tool changer with 42 magazine positions IKZ 40 bar with paper belt filter Sealing air for scales Scraper belt conveyor Coolant Facility ́ Blow-off device Blowing air d.d. spindle center Manual Cab Door , Manual Cab Roof Polycarbonate Safety Lenses Electronic Heat Compensation Electronic handwheel BLUM Wz-bruch / - Measurement A 2 3 D Probe Heidenhain Chip rinsing gun Oil mist extraction Control cabinet cooling unit ( RITTAL) 4 Pieces Height Adjustable Machine Shoes

spindle passage: 375 mm turning diameter over bed: 1030 mm turning length: 1750 mm spindle bore: 375 mm max. turning diameter: 650 mm spindle turning speed range: 5- 500 U/min spindle motor: 45 / 37 kW Control: OSP P300 L x-travel: +330 / -140 mm z-travel: 2040 mm rapid traverse x + z axis: 5 / 10 m/min tail stock: tailstock quill diameter: 180 mm tailstock quill stroke: 200 mm taper in tailstock MT: MT 6 total power requirement: kW weight of the machine ca.: ca 23 t dimensions of the machine ca.: 7,1 x 3,2 x 2,85 m Cnc Oil Country Lathe CNC-controlled oilfield lathe For heavy-duty machining of large and heavy turned parts and pipe end machining - CNC Control OSP P300L - Front and Rear CHUCK: SMW Autoblok 3 - jaw Chucks (both 850mm dia.) - Tool Revolver 12-fold (static Tools) - Chip Conveyor - Exhauster Power on: 20.538h , N/C Running Time: 2.270h Spindle Revolution Time: 2.287h, Cuttin ...

Bending direction: clockwise, steel tube diameter: 50mm, steel tube thickness: 3mm, stainless steel tube diameter: 50mm, stainless steel tube thickness: 2mm, max. section modulus: 5cm³, bending angle: 180°+10°, max. tube length: 2000mm, max. radius range: 150mm, bending height: 1050mm, bending head length: 850mm, min. bend spacing: 400mm, nominal pressure: 250bar, operating pressure: 200bar. Machine dimensions X/Y/Z: approx. 3200mm/1400mm/1300mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.

A fully automatic horizontal tunnel stretch wrapper Bang & Co for securing products on corrugated cardboard blanks is available. Turntable speed: 100rpm, max. conveyor speed: 18m/min, carton width range: 70mm-650mm, min. product length: 200mm, max. spool diameter: 140mm, max. spool height: 125mm, film roll inner diameter: 38mm, film thickness range: 18µm-40µm. Machine dimensions X/Y/Z: approx. 1600mm/1250mm/1650mm, weight: approx. 500kg, operating hours: approx. 6851h. Dokumentation vorhanden. An on-site inspection is possible.

Lippert belt conveyor GF 3000-650-500 RA1410 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3000 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (UR): Ø = 81 mm Belt: Type SNB-8E Year of construction: 2 ...

Dimensions (L/W/H): 2260x920x2250 mm Weight: 450 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1270 mm y-travel: 670 mm z-travel: 625 mm CNC-control: SIEMENS 828 D table-size: 1300 x 670 mm max. table load: 1000 kg spindle taper ISO: SK 40 spindle turning speed range: 12000 U/min feed stepless: 8000 mm/min rapid traverse: 36 / 36 / 30 m/min drive capacity - spindle motor: 18,5 kW tool change unit: 30 Pos. total power requirement: 40 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3,20 x 2,45 x 2,40 m chip conveyor: 4,10 x 0,65 x 1,50 coolant: 3,60 x 2,20 x 0,80 m - Siemens 828D CNC control - Direct drive spindle: 12,000 rpm - Two-contact clamping system in the BIG-PLUS spindle (SK40 spindle taper) - Oil cooling of the spindle head - Thermal compensation system (software) - Tool magazine: 30 tools - RENISHAW tool and workpiece probe - Internal cooling via the spindle centre: 12 bar - External cooling with air and cooling lubricant - Internal thread spi ...

This Hypertherm Powermax 105 Sync XXL plasma cutting system is offered. Table size X/Y/Z: 2500mm/10000mm. Cutting heads: 3. The system can be inspected under power by arrangement.

MICROSTEP MSF-Pipe-T 6501.200L tube and profile fiber laser was built in 2018 in Slovakia by MicroStep spol. S.r.o. The machine, which is designed for precision cutting of tubes and profiles of various cross-sections and non-standard shapes, is an excellent choice for modern business. This is because a number of state-of-the-art technical solutions guarantee the most accurate cutting results throughout its entire service life. 2D or 3D cutting is performed by means of a stable 2 kW fibre optic beam, which is generated by a resonator of the highest energy efficiency. The 3D laser scanner accurately measures the workpiece before machining to determine its actual shape along the cutting trajectory. Advanced algorithms then allow the control system to appropriately adjust the movement of the cutting tool and supports, as well as compensate any workpiece inaccuracies. The work area is c ...

General SKU305U615 MakeSTC Engineering GmbH TypeReaktor 6500LTR LocationBarneveld CEcheck Pressure Working pressure0.2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume6500 Ltr. Motor7.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity6500 Ltr. Vessel sizesDia. 2000x2534 mm Dished bottomcheck Dished top sidecheck ManholeDia. 450 mm Top connectionsDN200, DN100, DN50(4x) OutletDN80 Half coil jacketed45,5Ltr Max. temperature-20/160°C With paddle stirrercheck EKATO, Type: HWL2080 Motor7,5kW, 380-420/655-725Volt, 1440rpm (EX) Speed mixing shaft46rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) Information No.6004 Year of construction2005 Floorspace2,3x2,3 m Total height3,7 m Weight2100 kg ATEX compatiblecheckStainless Steel ReactorsSTC E ...

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 650 mm -Length extended: 1127 mm -Width: 14 mm/height: 58 mm -Price: per pair (left right) -Weight: 2.9 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 650 mm -Length extended: 1131 mm -Width: 13 mm/height: 56 mm -Price: per pair (left right) -Weight: 2.9 kg

CONTROLS   PLC SIEMENS S5 95U PRESS DESIGN   drive system: hydraulic   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   table cushion: yes PRESS FORCES   total force (nominal): 650 to PRESS TABLE   table surface (left-right): 3000 mm   table surface (front-back): 1800 mm SLIDE   slide force: 630 to   table surface (left-right): 3000 mm   table surface (front-back): 1800 mm   stroke: 1000 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   working velocity min.: 7 mm/s   working velocity max.: 15 mm/s   return velocity max.: 120 mm/s   return force: 65 to DIE CUSHION (TABLE CUSHION)   cushion force: 250 to   stroke: 400 mm   c ...

Transnorm spiral helix belt curve conveyor right 90°-750-650 IR1200 RA2437 Technical data: Frame width (NB): 750 mm belt width (GuB): 650 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees decline: 200 mm / 90° = 800 mm / 360° support feet: optionally available Conveying speed (v m/s): 0,35-1,21 Drive: SEW gear motor with movi-mot frequency converter for stepless speedcontroll Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive angle: 90° scope of delivery: including Movimot frequency converter KW: 0,55/S1 Construction year: 2001 B ...

Level sensor, Sensor, probe, immersion probe, float switch, magnetic switch, magnetic float switch -Manufacturer: KSR Kuebler, Magnetic Float Switch -Type: ARV1.5 -VSS/R-L1.650/12-V44A-adjustable -Immersion depth: approx. 1650 mm -Dimensions: 1785/75/90 mm -Weight: 1.4 kg

Type: Flip-over conveyor 650 Serial number: E050970105101 Year of construction: 2016 Belt width: 650 mm Flip-over: 90 - 200 mm Power: 3 x 400V, 50Hz, 0.5kW Dimensions: 2100 x 1300 x 1450 mm

Clamping plate, welding table, welding table, straightening plate -Mounting plate is: steel -Width: 650 mm -Length: 650 mm -Height: 845 mm -Plate thickness: 40 mm -Plate is: on steel frame -Transport dimensions: 650/650/H845 mm -Weight: 203 kg

Two mobile industrial air cleaners Trotec that have only been used once are available. Air volume flow: 5700m³/h, negative pressure: 1150Pa, air volume for filter class H: 3000m³/h, min. filter area with H13: 26m², opening diameter: 380mm. Machine dimensions X/Y/Z: approx. 1300mm/800mm/1050mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

TECHNICAL SPECIFICATIONS Description: Conveyor belt system Version: stationary Wheelbase: 140 m Strip width: 650 mm Year of manufacture: unknown Drive power: 18.5 kW Drive type: Slip-on gear motor (SEW) A-Prop Support Catwalk: single-sided Belt quality: Good Belt tension: Weight tensioning station Belt turning station: yes Top Strap Cover: Yes Galvanized version: yes Segment length: approx. 25 m SPECIFIC COMMENT - Good condition - Incl. control box - Incl. feed hopper, approx. 9 cbm

Machine light, machine light, work area light, system light, compact light, switch cabinet light -Manufacturer: steel, compact luminaire with glued-on escape sign -Type: C-LUX 6500/1081 -Voltage: 230 V -Fluorescent lamp: 1x 8 watts -Dimensions: 445/110/H190 mm -Weight: 2.1 kg

Turntable, slewing ring -Outer diameter: below 650 mm -Inside diameter: above 460 mm -Height: 52 mm -Load capacity: 2500 kg -Number: 2x available -Price: per piece -Weight: 23 kg

Injection molding machine Krauss Maffei CX 650-3000 BJ 2009

This 3-axis DOOSAN NX 6500 II was manufactured in 2019. It features a Heidenhain TNC 640 control, a table size of 1200 mm by 650 mm, and travels of 1050 mm in X, 650 mm in Y, and 650 mm in Z. The spindle reaches up to 20,000 rpm, and the tool magazine holds 30 positions. If you are looking to get high-quality milling capabilities consider the DOOSAN NX 6500 II machine we have for sale. Contact us for more information.

This 3-axis DMG MORI DMC 650V was manufactured in 2014. It features a spindle speed of 12000 rpm, X/Y/Z travels of 650/520/475 mm, and rapid feeds up to 36 m/min. The machine includes a SK40 tool taper, a 20-position tool magazine, and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the DMG MORI DMC 650V machine we have for sale. Contact us for more information.

cutting width: max 610 mm Cutting height: max 200 mm Saw blade diameter: 650 mm Motor output: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, accessories -Execution: -interlocking in a stair-like pattern -for use in pairs -individual documents can be used in conjunction with clamping iron no. 372000 -Support height: 30 to 200 mm -Heated steel: painted -Weight: 6 kg

This 3-axis AWEA AF-650 vertical machining center was manufactured in 2017. It features a table size of 750 x 510 mm, can handle a maximum load of 500 kg, and offers axis travels of X = 650 mm, Y = 510 mm, Z = 510 mm. Equipped with a high-speed spindle at 20,000 rpm and a Fanuc 0i-MF CNC control, its ideal for precise machining tasks. Contact us for more information about this machine.

roll diameter: 650 mm roll length: 2100 mm rolls drilled: Peripher gebohrt Nip adjustment: hyraulisch total power requirement: 160 kW Condition: used, completely overhauled, with warranty Specification: Meccaniche Moderne rolling mill 650 x 2100 mm - used Model Monoblock – motor under the rolls - Roll diameter: 650 mm - Roll length: 2100 mm - Peripherally drilled rolls for water cooling - Hydraulic gap adjustment: new - Hydraulic unit: new - Tiltable guide plates - Rolls mounted on bronze bearing bushes with corresponding lubrication system - NEW hydraulic unit with DropSa distributors for lubrication of the bronze bushings - Rolls with new ball joints, manufactured by Johnson-Fluiten, for connection to the water circuit - New AC motor: power 160 kW - 400V - 50 Hz - 2x NEW safety brakes for drive motor for EMERGENCY STOP - Stainless stee ...

This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine.