650 kva generator used for sale

General SKU304M421 LocationBarneveld MakeBartels & Lüders No.4447 Pressure Working pressure jacket4 Bar Main Features MaterialStainless steel Volume6500 Ltr. Motor2.5 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity6500 Ltr. Vessel sizesdia. 2000x2200mm Dished bottomcheck Dished top sidecheck Manholedia. 500mm Top connections11x Outletdia. 65mm With jacketcheck 650 Ltr Max. temperature150°C With paddle stirrercheck Motor2,5 Kw, 220/380 Volt (Ex) Speed mixing shaft8,7 - 43 Rpm MaterialStainless steel Information Year of construction1963 Floorspace2,6x2,6 m Total height3,1 m Weight3680 kgStirring vesselsBartels & LuederStirring vessels > Stirring vesselsBrand > Bartels & Lueder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwid ...

General SKU357W959 MakeApaco LocationBarneveld TypeAS 650 Specified Features - Pressure vessel Material finishPolished inside and outside With jacketcheck Pressure Working pressure2.5 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume650 Ltr. Pressure2.5 Bar Vacuumcheck Specified Features - Pressure vessel Capacity650 l Vessel sizesDia 950x1000 mm Dished topcheck Dished bottomcheck With covercheck ManholeDN500 Top connectionsDN 25 (2x) Outlet1,1/2: Max. temperature140°C MaterialStainless steel 1.4435(316L) General No.515:425 Year of construction2002 Mounted on legson wheels Floorspace1,2x1,2 m Total height1,7 mPressure vesselsApaco AGTanks > Pressure vesselsBrand > Apaco AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You a ...

General SKU446W1481 LocationBarneveld CEcheck MakePink Wertheim GmbH Themosysteme Pressure Working pressure0.1 Bar Vacuum possiblecheck Working pressure trays4 Bar Main Features MaterialHastelloy Volume350 Ltr. Surface2.53 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housing1.4301 Heating surface2,53 m2 Max. temperature95°C Number of trays6 Tray sizes650 x 650 mm Distance between the trays120 mm With 1 doorcheck Connectionscheck MaterialStainless steel 2.4602 (Hastelloy C-22) Information TypeWSD 650-650-129-6 Machine number2002 4712 Year of construction2002 Mounted on framecheck Floorspace1,20 x 1,70 m Total height1,90 m Weight1060 kg Extra SpecificationsWith QVF glass condensor bowl, volume 7 l. :Tray dryersPink WertheimDryers > Tray dryersBrand > Pink Wertheim What you can expect from Foeth: -- Machine is in working condition --  ...

General SKU330W1522 MakeAro Type650-607 Mach.No.90’ 1747 Year of construction1990 Pressure Working pressure10 Bar Main Features MaterialStainless steel Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Pneumatic drivecheck Outletdia. 25 mm With jacketcheck Centrifugal Pumps MaterialStainless steel General LocationBarneveld Mounted on wheelscheck With switchcheck Floorspace1,30x0,63 m Total height1,80 m Weight300 kg Extra SpecificationsDrum air pressure pump, Festo pressure cabinetCentrifugal PumpsAroPumps > Centrifugal PumpsBrand > Aro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU330W1524 MakeAro Type650-607 Mach.No.15’1064 Year of construction2015 Pressure Working pressure10 Bar Main Features MaterialStainless steel Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Pneumatic drivecheck OutletDia. 25 mm With jacketcheck Centrifugal Pumps MaterialStainless steel General LocationBarneveld Mounted on wheelscheck With switchcheck Floorspace1,30x0,63 m Total height1,80 m Weight300 kg Extra SpecificationsDrum air pressure pump, Festo pressure cabinetCentrifugal PumpsAroPumps > Centrifugal PumpsBrand > Aro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

2 Pcs. Weserhütte EB 1.000 x 700/650 mm for sale. Electrical motor included, crusher can be sandblasted and painted.

Size: 1.300 (1.250) x 650 mm - MA220 (380V. / 16A. / 0,6 kW) Magnetic vibrator - With steel wear plates - Included Thyristor controller

spindle passage: 375 mm turning diameter over bed: 1030 mm turning length: 1750 mm spindle bore: 375 mm max. turning diameter: 650 mm spindle turning speed range: 5- 500 U/min spindle motor: 45 / 37 kW Control: OSP P300 L x-travel: +330 / -140 mm z-travel: 2040 mm rapid traverse x + z axis: 5 / 10 m/min tail stock: tailstock quill diameter: 180 mm tailstock quill stroke: 200 mm taper in tailstock MT: MT 6 total power requirement: kW weight of the machine ca.: ca 23 t dimensions of the machine ca.: 7,1 x 3,2 x 2,85 m Cnc Oil Country Lathe CNC-controlled oilfield lathe For heavy-duty machining of large and heavy turned parts and pipe end machining - CNC Control OSP P300L - Front and Rear CHUCK: SMW Autoblok 3 - jaw Chucks (both 850mm dia.) - Tool Revolver 12-fold (static Tools) - Chip Conveyor - Exhauster Power on: 20.538h , N/C Running Time: 2.270h Spindle Revolution Time: 2.287h, Cuttin ...

Lippert belt conveyor GF 3000-650-500 RA1410 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3000 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (UR): Ø = 81 mm Belt: Type SNB-8E Year of construction: 2 ...

Dimensions (L/W/H): 920x2260x2150 mm Weight: 300 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2260x920x2250 mm Weight: 450 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1270 mm y-travel: 670 mm z-travel: 625 mm CNC-control: SIEMENS 828 D table-size: 1300 x 670 mm max. table load: 1000 kg spindle taper ISO: SK 40 spindle turning speed range: 12000 U/min feed stepless: 8000 mm/min rapid traverse: 36 / 36 / 30 m/min drive capacity - spindle motor: 18,5 kW tool change unit: 30 Pos. total power requirement: 40 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3,20 x 2,45 x 2,40 m chip conveyor: 4,10 x 0,65 x 1,50 coolant: 3,60 x 2,20 x 0,80 m - Siemens 828D CNC control - Direct drive spindle: 12,000 rpm - Two-contact clamping system in the BIG-PLUS spindle (SK40 spindle taper) - Oil cooling of the spindle head - Thermal compensation system (software) - Tool magazine: 30 tools - RENISHAW tool and workpiece probe - Internal cooling via the spindle centre: 12 bar - External cooling with air and cooling lubricant - Internal thread spi ...

This Hypertherm Powermax 105 Sync XXL plasma cutting system is offered. Table size X/Y/Z: 2500mm/10000mm. Cutting heads: 3. The system can be inspected under power by arrangement.

MICROSTEP MSF-Pipe-T 6501.200L tube and profile fiber laser was built in 2018 in Slovakia by MicroStep spol. S.r.o. The machine, which is designed for precision cutting of tubes and profiles of various cross-sections and non-standard shapes, is an excellent choice for modern business. This is because a number of state-of-the-art technical solutions guarantee the most accurate cutting results throughout its entire service life. 2D or 3D cutting is performed by means of a stable 2 kW fibre optic beam, which is generated by a resonator of the highest energy efficiency. The 3D laser scanner accurately measures the workpiece before machining to determine its actual shape along the cutting trajectory. Advanced algorithms then allow the control system to appropriately adjust the movement of the cutting tool and supports, as well as compensate any workpiece inaccuracies. The work area is c ...

General SKU305U615 MakeSTC Engineering GmbH TypeReaktor 6500LTR No.6004 Year of construction2005 LocationBarneveld Pressure Working pressure0.2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume6500 Ltr. Motor7.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity6500 Ltr. Vessel sizesDia. 2000x2534 mm Dished bottomcheck Dished top sidecheck ManholeDia. 450 mm Top connectionsDN200, DN100, DN50(4x) OutletDN80 Half coil jacketed45,5Ltr Max. temperature-20/160°C With paddle stirrerEKATO, Type: HWL2080 Motor7,5kW, 380-420/655-725Volt, 1440rpm (EX) Speed mixing shaft46rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) General Floorspace2,3x2,3 m Total height3,7 m Weight2100 kg CEcheck ATEX designedcheckStainless Steel Reactor ...

CONTROLS   PLC SIEMENS S5 95U PRESS DESIGN   drive system: hydraulic   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   table cushion: yes PRESS FORCES   total force (nominal): 650 to PRESS TABLE   table surface (left-right): 3000 mm   table surface (front-back): 1800 mm SLIDE   slide force: 630 to   table surface (left-right): 3000 mm   table surface (front-back): 1800 mm   stroke: 1000 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   working velocity min.: 7 mm/s   working velocity max.: 15 mm/s   return velocity max.: 120 mm/s   return force: 65 to DIE CUSHION (TABLE CUSHION)   cushion force: 250 to   stroke: 400 mm   cushion plate surface (left-right): 2500 mm   cushion plate surface (front-back): 1450 mm   working principle: hydraulical TOOL ASSEMBLY DIMENSIONS   distance tabl ...

Transnorm spiral helix belt curve conveyor right 90°-750-650 IR1200 RA2437 Technical data: Frame width (NB): 750 mm belt width (GuB): 650 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees decline: 200 mm / 90° = 800 mm / 360° support feet: optionally available Conveying speed (v m/s): 0,35-1,21 Drive: SEW gear motor with movi-mot frequency converter for stepless speedcontroll Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive angle: 90° scope of delivery: including Movimot frequency converter KW: 0,55/S1 Construction year: 2001 B ...

Two mobile industrial air cleaners Trotec that have only been used once are available. Air volume flow: 5700m³/h, negative pressure: 1150Pa, air volume for filter class H: 3000m³/h, min. filter area with H13: 26m², opening diameter: 380mm. Machine dimensions X/Y/Z: approx. 1300mm/800mm/1050mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

This 3-axis AWEA AF-650 vertical machining center was manufactured in 2017. It features a table size of 750 x 510 mm, can handle a maximum load of 500 kg, and offers axis travels of X = 650 mm, Y = 510 mm, Z = 510 mm. Equipped with a high-speed spindle at 20,000 rpm and a Fanuc 0i-MF CNC control, its ideal for precise machining tasks. Contact us for more information about this machine.

Grinding length: 650mm, center height: 125mm, grinding wheel dimensions X/Y/Z: 406mm/60mm/127mm, peripheral speed: 45m/s, spindle power: 4kW, travel X/Z: 210mm/810mm, feed rate: 8m/min, table swivel: 8°, speed: 5000rpm, tool spindle head swivel: -30°/90°. Machine dimensions X/Y/Z: approx. 3600mm/2850mm/2200mm, weight: approx. 4000kg, control: Siemens Sinumerik. The X-axis spindle and the scale were renewed. Including Movomatic measuring system and accessories. Documentation available. On-site inspection is possible.

Code: 0106 Brand: OMEC - ITALY Model: 650-M Dovetailing machine Technical characteristics: Installed power on board machine Kw 0,75 Max working width mm 420 Center to center of indents mm 25-40-50-80 Overall dimensions: mm 800 x 720 x 1320 h Weight kg 130

Material No.: 1.2487.0 // Serial No.: 1267-3491416 Operating hours: 26512 h Equipment / Additional information: Max. working pressure PS: 13,00 bar Compressed air inlet temp. TS: 3 – 60 °C Ambient temperature: 3 – 50 °C Phases: 3 / Frequency: 50 Hz Voltage: 400 V Full load current: 17 A Full load current drive motor: 14 A Electrical diagram: STG-03000 00

cutting width: max 610 mm Cutting height: max 200 mm Saw blade diameter: 650 mm Motor output: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nominal width: 3000mm, Working width range: 600mm-2800mm, Layers: 1, Number of chambers: 6, Heating system: Gas, Air supply: top/bottom, Max. working speed: 100m/min, Chain arrangement: horizontal, Cooling cylinders: 2, Padder: twin cylinder Matex 6000, Exhaust fan: 1, Documentation available, On site inspection is possible.

roll diameter: 650 mm roll length: 2100 mm rolls drilled: Peripher gebohrt Nip adjustment: hyraulisch total power requirement: 160 kW Condition: used, completely overhauled, with warranty Specification: Meccaniche Moderne rolling mill 650 x 2100 mm - used Model Monoblock – motor under the rolls - Roll diameter: 650 mm - Roll length: 2100 mm - Peripherally drilled rolls for water cooling - Hydraulic gap adjustment: new - Hydraulic unit: new - Tiltable guide plates - Rolls mounted on bronze bearing bushes with corresponding lubrication system - NEW hydraulic unit with DropSa distributors for lubrication of the bronze bushings - Rolls with new ball joints, manufactured by Johnson-Fluiten, for connection to the water circuit - New AC motor: power 160 kW - 400V - 50 Hz - 2x NEW safety brakes for drive motor for EMERGENCY STOP - Stainless stee ...

Qty. 1 Second-hand complete Copper Strip Production Plant Mfc.: Shinkwang Tech, Waterburry Farrel, Rozai, Handuck, Mirae, Wuishi, Youngchang, Sundwig, Sonoda Eng., Wuxi Longar Mach., Backsan Mach., Deakwang Mach., Hankug Eng., Intrize, Samjung Built: 1960 – 2020 Material Width: 650 mm Thickness Entry: 12 mm Exit: 0.05 mm Consist of: Break Down Mill Intermediate Mill Finishing Mill Annealing Coil Built-Up Line Roll Grinder Pickling Degreasing Buffing Tension Leveller Slitters (3) Precious Slitter Drum Cutters (2) Scrap Shears (2) Cut-to-length (2) Packing Machine Draw Bench Machine

roll diameter: 650 mm roll length: 2100 mm rolls drilled: Peripher gebohrt Nip adjustment: hyraulisch total power requirement: 2x 132 kW Condition: used, completely overhauled, with warranty Specification: Pluridrive rolling mill 650 x 2100 mm - used External gearbox model - motor placed on the side of the machine - Roll diameter: 650 mm - Roll length: 2100 mm - Peripherally drilled rolls for water cooling - 2 new AC motors: Power 2x 132 kW - 400V, 50 Hz - Cardan joints between gearbox and rolls - New drive gearbox - Hydraulic gap adjustment: new - Hydraulic unit: new - Tiltable guide plates - Rolls mounted on bronze bearing bushes with corresponding lubrication system - NEW hydraulic unit with DropSa distributors for lubrication of the bronze bushes - Rolls with new ball joints, manufactured by Johnson-Fluiten, for connection to the water circu ...

General SKU426X1425 LocationBarneveld Main Features MaterialStainless steel Surface1.1 m2 Size length1750 mm Sizes width650 mm Specified Features - Vibro sieve Sieve surface1,1 m² Number of sieve decks:1 Inletø 120 mm Outlet2x ø 120 mm Drive vibro motorcheck 2x Motor0,5 kW (400 V 1410 rpm) Sieve perforation3,8 mm, 1,5 mm With extra sieve deckscheck MaterialStainless steel 1.4301 (304) Information MakeAEG Vibrationstechnik Serial7 32609-002 Year of construction1997 Floor space2,3 x 1,1 m Total height1,7 m Weight350 kgVibro sievesAEG VibrationstSieves > Vibro sievesBrand > AEG Vibrationst What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machin ...

Motor output: 7,5 kW Weight: 450 kg : 6500 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 390 mm grinding length: 650 mm centre height: 200 mm total power requirement: 46 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 3x3x2,4 m Universal cylindrical grinding – Type WUG21 (W27) Grinding length 650 mm EMAG Weiss stands for high-end technology in universal cylindrical grinding between centres. With its CNC-controlled WUG 21 machines, EMAG Weiss offers the right solution for virtually every user. --> Technical data Max. grinding length: 650 mm --> Centre height: 200 mm --> External grinding diameter: 1 – 390 mm --> Max. weight flying MK4: 100 kg --> Max. workpiece weight between centres: 250 kg --> Feed: --> X-axis travel: 480 mm --> Z-axis travel: 1.150 mm --> Workpiece headstock --> Tailstock --> Grinding spindle headstock --> Coolant device, manufacturer HYFRA, --> Belt filter, manufacturer Knoll, type KF 200 - year of manufacture 2012 ...

This 3-axis DMG MORI DMC 650V vertical machining centre was manufactured in 2017. It features a CNC Celos with Siemens 840D, a spindle speed of up to 20,000 rpm, and a tool magazine with 20 SK40 positions. The table measures 960 x 570 mm, and it includes an NC divider Mori Seiki DDRT 200X. If you are looking to get high-quality milling capabilities, consider the DMG MORI DMC 650V machine we have for sale. Contact us for more information.

General SKUR0159 LocationBarneveld CEcheck MakePink GmbH Thermosysteme Pressure Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialHastelloy Volume250 Ltr. Surface2.7 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface2,7 m² Drying chamber sizes670x670x140mm (4x) With jacketcheck Max. temperature115 degr. C Number of trays4 Tray sizes670x670mm Distance between the trays140mm Max. temperature115 degr.C With containers4x Container sizes650x650x40mm With 1 doorcheck MaterialStainless steel 2.4602 (Hastelloy C-22) Information TypeVSD-EX 650-650-140-4 Machine number2005 4783 Year of construction2005 With switchgearcheck Floorspace1,6x1,2 M Total height2,3 M Weight1400 KgTray dryersPink WertheimDryers > Tray dryersBrand > Pink Wertheim What you can expect from Foeth: ...

This 5-axis DN SOLUTIONS DVF 6500 was manufactured in 2022. It features a 650 x 600mm table, capable of handling a maximum weight of 600kg. Equipped with a high-speed spindle up to 18,000 rpm and a 40 tool magazine, it ensures efficient machining. The FANUC control unit and high-pressure 20 bar cooling through the spindle enhance precision and productivity. Consider the opportunity to buy this DN SOLUTIONS DVF 6500 vertical machining centre. Contact us for more information.

Belt sander manufactured in 2013. This FELDER FW 650 features a working width of 650 mm and a powerful 7.5 kW motor. It includes a variable feed speed ranging from 3.7 to 16 m/min and an automatic belt centering system. The machine comes with interchangeable sanding pads and a rubber contact roller. If you are looking to get high-quality sanding capabilities, consider the FELDER FW 650 machine we have for sale. Contact us for further details.

This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine.

- With chassis - Belt length, between axles: 6'500mm - Belt width : 300mm - Motor: 400V, 50Hz - With large inlet hopper attachment - Dumping height : approx. 1200mm - Hopper width: 1000mm - With rack and pinion winch - In good condition

Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible.

x-travel: 2800 mm y-travel: 1000 mm z-travel: 1200 mm table surface area: 2000 x 800 mm rotary table dia.: 800 mm spindle taper: SK 50 spindle turning speed - stepless: 50 - 2000 U/min max. torque on the spindle: 3000 Nm spindle drive: 30 kW feeds longditudinal/cross/vertical: 2 - 2000 mm/min rapid motion -longitudinal/cross/vertical: 7 m/min control: SIEMENS control: SINUMERIK 850 M no. of tools in magazin: 56 workpiece diameter at full load: 114 mm wotkpiece diameter with 2 vacant positions: 200 mm workpiece length: 400 mm weight of tools max.: 16 kg tool changing time: ca. 8 - 9 sec internal coolant system feed: ja / yes total power requirement: kW weight of the machine ca.: 25,4 t = 5-axis CNC-bed-type milling machine with integrated NC-rotary table and NC-swivelling milling head - Acc.: tool pre-setting device, various tool fixtures, chip conveyor, coolant with high pressure pump ...

used sheeter Fritsch 50/650 EASY  Manufacturer: Fritsch Model: 50/650 EASY Automatic control flour spreader stainless steel Au rolls Belts foldable Details see pictures  Baker's condition Details see pictures.

Manufacturer: Fritsch Model: 50/650 EASY Automatic Control Flour Spreader Stainless Steel Au Roll Belts Foldable Details see pictures

used sheeter Fritsch 30W/650Â Manufacturer: FritschModel: 30W/650Analog controlStainless steel on rollersHinges foldableThe Fritsch 30W/650 sheeter is a special machine used in bakeries and other companies in the food industry to roll out dough evenly and precisely. This machine is usually used for processing dough for croissants, puff pastries, pizza and other baked goods. The Fritsch 30W/650 is designed to roll the dough to the desired thickness and size to create an even texture

Arbor Ø: 30 mm Mandrel length: 135 mm width: 600 mm length: 1.000 mm height: 1.400 mm WIDMA tool sharpening machine for grinding and sharpening tools or for machining complex geometric shapes. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0345 Brand: STROMAB Model: KGS 650 - CE Standard Automatic knife grinding machine for planer knives, knife blades and straight tools – CE Standard Technical data: Max working length 650 mm Grinding motor power 0,75 Hp External diameter of the grinding wheel 127 mm Grinding wheel feed per stroke 0,01/0,05 mm Carriage feed motor power 0,15 Hp Carriage feed speed 12,5 mt/min Tilting grinding wheel motor unit Base with tool storage shelves Overall dimensions mm 1200 x 500 x 1300 h Weight kg 103

Load turning device, load turning beam, load turning device, load beam, adjustable beam, crane beam, beam for pillar slewing crane, indoor crane, workstation crane, chain hoist -Crane cross member: adjustable, for the transport of different loads -Load capacity: 6500 kg -Hook spacing: min. 1460 mm / max. 2880 mm -Steel rope: O 22 mm, length 1580 mm -Dimensions: 3025/190 / H945 mm -Net weight: 230 kg

Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, accessories -Execution: -interlocking in a stair-like pattern -for use in pairs -individual documents can be used in conjunction with clamping iron no. 372000 -Support height: 22 to 208 mm. -Material: -Heated steel: painted. -Scope of delivery: -includes 2x wooden boxes -Weight: 12 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roll width: 650 mm -Conveying length: 1800 mm -Diameter roller: 80 mm -Center distance: 150 mm -Height: 270 mm -driven: via chain -Geared motor: 0.37 kW -Speed: 6.9 m/min -Dimensions: 1800/720/H270 mm -Weight: 134 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roll width: 650 mm -Conveying length: 2250 mm -Diameter roller: 80 mm -Center distance: 150 mm -Height: 330 mm -driven: via chain -Geared motor: 0.37 kW -Speed: 6.5 m/min -Dimensions: 2250/870/H330 mm -Weight: 210 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers, deflection roller -Conveyor belt rollers: Transport rollers, diameter 97 mm -Transport width: 650 mm -Shaft: Ø 20 x 120 mm -Bearing housing/ball bearing: SNR FC205 / UC205G2 -Bolt circle: Ø 90 x 12 mm -Quantity: 1x transport roller available -Dimensions: Ø 118 x 875 mm -Weight: 14.3 kg

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, motor compressor, separating hood compressor, separating hood compressor, cooling unit -Handover: in the current condition as seen -Pipe: See photos for damage -Manufacturer: Danfoss, refrigeration compressor cooling unit -Compressor: Type 2515 -Perfomance: -Voltage: 220V/50Hz -Dimensions: 650/425/H400 mm -Weight: 39.7 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Interroll, belt conveyor type 4081 without drive -Belt width: 550 mm -Total conveying length: 650 mm -Drive shaft: Ø 20 x 100 mm -Number: 3 conveyor belts available Price: per piece -Transport dimensions: 840/660/H130 mm -Weight: 33 kg/pc.