6300 v used for sale

Technical data: Nominal power 600 kg/h Power: Drive engine 0.75 (1.02) kW (hp) Brush cleaning 0.37 (0.5) kW (hp) High-pressure cleaner 4.7 (6.4) kW (hp) Electric connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 825 mm Width 1 085 mm Height 1 290 mm Discard or drop-in height 1 290 mm Bandwidth 420 mm Order width 300 mm Order height 10-50 mm Weight (ribbon press) 550 kg Material 1,4301/AISI 304 Juice yield 70% Ribbon speed (infinite) 2.1-5.5 m/min Transcourse time 0.4-1 min Water connection at least G 1/2, "min 12 l/min Height juice drain 305 mm Height Trester ejection 780 mm Can be used for nuclear and stone fruits Included high pressure cleaner, compressor

Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg

2,57:1

2,91:1

Cylinder head, Vasa 32 Low Nox Including valves, springs and rotocaps Part no: 120055

4 pieces same batteries 24 V

Compressor Bitzer 4FE-28Y-40P

Compressor Bitzer 6JE-33Y-40P

Make: BITZER Type: 6H-35.2 Conveyor volume: 110.5 m3/h Speed: 1450 rpm New Price on request

Make: BITZER Type: 6F-40.2 Y Conveyor volume: 151.6 m3/h Speed: 1450 rpm Price on request

used vertical tool presetting device in very good condition, ready to use Recording: SK 50 max. tool length: 460mm max. tool diameter: 400mm Optics: 20x optical magnification Energy supply: Current: 220Volt 50 HZ luminous flux connection Pneumatics: 6 bar air pressure connection Machine space requirement: (w x t x h) approx. 1400 x 800 x 1700mm (without operator and service environment) Accessories / Optional equipment: â?¢ Machine cabinet with compartment â?¢ Calibration mandrel / reference mandrel â?¢ Adapter holder Iso 50 to Iso 40 for SK 40 tools Bdujvng8ha â?¢ Adapter holder Iso 50 to VDI 30 â?¢ Adapter holder Iso 50 to VDI 20 â?¢ Adapter holder Iso 50 on special tool holder â?¢ Additional measuring clock holder â?¢ Tool positioning device to 4 x 90° â?¢ Operatin ...

E - engine of Exhaustor 3 x 380 volts.

Manufacturer: Verpama Switzerland origin: Switzerland Dimensions: 9.0 x 0.55 white Verpama order number: 265

Used stainless steel coating pan made in Hungary by Vegyepszer. Drum volume 200 liters. Unit includes air fan. Drum dimentions diameter 1.1 m depth 45 cm.

Cutting capacity round 90°: 170 mm cutting capacity flat 90°: 140 x 210 mm cutting capacity around 45°: 125 mm section flat 45°: 100 x 125 mm working height: 890 mm band saw blade dimensions: 2080 x 20 x 0,9 mm cutting speed: 20-90 m / min coolant pump S1 100%: 100 W power: 0.75 of kW machine dimensions (L x D x H): 1250 x 540 x 1600 mm weight approx.: 157 kg

Make: BITZER Type: 6G-30.2Y-40P Conveyor volume: 126.8 m3/h Speed: 1450 rpm Price on request

Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 140 tons

Make: BITZER Type: S4G-12.2-40P Funding volume: 42.3 m3/h Built year: 1997 with 3 compressors for freezing Two-stage Price on request

Make: BITZER Type: S4G-12.2-40P Funding volume: 42.3 m3/h Built year: 1997 with 3 compressors for freezing Two-stage with switch box Price on request

Qty. 1 Second-hand paper mill Mfc.: Valmet , METSO, Voith, Honeywell, Siemens, Ahlström Sulzer, Clark & Vicario, Andritz, Alfa Laval, GL & V Hedemora, Beloit, Tampella, Built: 1971 Rebuild: 1990 & 2004 Product: Uncoated magazine paper Production capacity: 290 000 tonnes Basic weight range: 44 – 57 g/m2 Width: 8.35 m Speed: 1500 m/min Raw materials: groundwood pulp, thermomechanical pulp, chemical pulp and fillers Headbox Mfc.: Valmet Type: OptiFlo 2 with dilution profiling (2004) Wire section Mfc.: Valmet Type: OptiFormer LB (loadable blades) (2004) Press section Mfc.: Valmet Type: SymPress B with 4th press (1990/2004) – shoe press in 3rd nip (2004) Drying section Mfc.: Valmet Type: SymDry (1990) – 4 single tier drying groups 2 double tier drying groups – ropeless tail threading (1990/2004) Max designed structural speed of parts rebu ...

Belts - oil separators Oil separator with KUNSTSTOFFGURT OPV - 1 / OPV - 2 This group of oil separators is recommended for industrial applications. The collection in the standard version is made of plastic without connecting traces, which is adapted to the requirements, e.g. polymer, elastomer, etc. All parameters such as performance, bandwidth, and so on are selected individually. An oil lifting height of up to 15 m is particularly useful in deep tanks, e.g. sewage treatment plants. The number after the marking (300/500/700/1000 mm) is the working length of the strip - depth from the mounting base. Complete oil separator with PU polyurethane tape. Belt color: green (standard), blue or white. Maximum liquid temperature up to 60°C. We have oil separators with a stainless steel belt INOX with a working temperature of up to 100 ° C at an additional cost. Maximum liquid temperature ...

The oil separator is used to collect oil floating on the surface. It is used wherever there is little working space and fluids must be moved and de-oiled in different places. It is a lightweight, compact portable device that is mounted on the wall of the in which the liquid to be cleaned is located. Thanks to this, it is possible to develop various technological active ingredients in de-oiled in different places. The device is designed for continuous operation. The disc is made of self-adhesive plastic, on which oil and carbohydrates, but water does not. Maximum liquid temperature up to 60 ° C - standard band. Maximum motor and housing temperature up to 40°C. Avoid mounting places with aggressive pH - additional motor protection required. With the OTV-300, you should take a 15-minute break every 3 hours. If the motor does not overheat, it can work longer. Continuous opera ...

Ready to ship

Ready to ship

Wire stitching machine VEB LEIPZIG P 66 Built in 1972 Machine No.: 66.72.126 1 staple head Functional The machine can be demonstrated in our warehouse - please make an appointment. Wire Stitching Machine VEB LEIPZIG P 66 1972 In 1972 Serial: 66.72.126 1 stitching head working condition Test is possible in our stock – just make an appointment. ••••••••••• The machine is available in the warehouse and can be tested. Test in our stock is possible. The machine can be visited in the warehouse. Can be visited in our stock. Only to commercial buyers with proof. Purchase only available for commercial customers with proof Sale without warranty and warranty. No return accepted. The machine is sold as it goes and stands. We sell the machine "as is", no warrenty, no guaranty. We don't take the goods back.  ...

E engine Three-phase asynchronous motor Manufacturer: VEM Model: K21R 315 MX4 Power: 160kw Supply: 400 V Revolutions: 1480/min Weight: 1000kg NEW, original box, unused from old stock for further details please refer to the pictures.

Fuel pump, Vasa 32 Part no. 165180, PEO-G030E LOrange Part no: 165180

Make: FRIGOPOL Type: RHLL/Hr0017 Compressor types: 2x30L-DLYB-7.5 7.5HP Electrical power 1x14L-DLYB-4.5 4.5HP Electrical Power Refrigerant: R404A Cooling capacity Total: 42 to 50kW at -10C Electrical power 18.8kW Volume flow: 74m3/h Price on request

Sieve, vorsieb 3 deck, bar screen. Mogensen Stangensizer 3 floors. type: VM 2036 ruettler with 2 4.6kw 1000 rpm.

lot of 6pcs. DAUB oven THERMO-ROLL type RDTO 08.12,5.10 SX02 or 10.12,5.10 A furnace for 20 sheets Usable area of 10 m² or 12 m² 6 oven total total area 60 m² or 72 m² - 120Bleche Oven is in very excellent condition, General and thorough overhauled and tested. Works like new. Very good steam. Secondary circuit for the baking Chamber. Turbo equipment. All maagnetic pump incl. daub thermal oil boiler plant including. 40 piece rack Sales including freight and installation Price on request

Make:IHI, BBC Type: VTR 401 Two Inlet

Grinder Rex vinkl

Very Good Condition Wartsila V32 Piston for Sale

Inner gear pump, internal toothed displacement pump chemical pump used Inner gear pumps are used to convey liquids of any viscosity. Also with abrasive dusts but without solid stake. e.B. oils, soaps, bitumen, tar, chocolate, molasses, cocoa butter, fat, glucose VARISCO/ ROTOTEC Type: V 85-2 SPG Flow rate at 190 rpm max approx. 15 m3/h Connections Inside approx. 100 Flange outside approx. 230 mm Gearmotor Lenze GST09-2M VBR 112C41 7.5 kW 190 rpm 400 V IP55 Dimensions: approx. 1400 x 400 x 470 mm All items are checked for function before delivery, if technically possible! Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

1 x Alpha Technologies Mooney MV2000e Viscometer software discs and operation manual are included. You will have to register the software. PC not available. In good condition.

see pdf attached

High-pressure cleaning device, high-pressure rinsing, high-pressure washer with suction device on hot-dip galvanized and painted high-quality steel frame with forklift tabs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction capacity - Petrol engines: for sucking Honda GX390 8.8kW and for cleaning - Honda GX690 17.9kW Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction capacity - Diesel engines: for sucking Yanmar L100 8.0kW and for cleaning Kohler KDW 1003 18.9kW HIGH PRESSURE PUMP 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium Cxr8gqdby HIGH-PRESSURE HOSE REELS: Type: manual hose reel Material: Stainless steel • Capacite: max. 50 m 1/2" high-pressure hose Hose: 50 m 1/2" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Material: Stai ...

The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons

Load capacity up to 12,500 kg Gripper content of 0.5 m³ up to 5 m³ Make: various renowned manufacturers workshop testing 2015 Fully functional workshop overhaul and paint renewal upon request.

specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m

Make: Danfoss Type: SZ100S4VC Performer New Vacuum: - Pressure: 25bar - Temperature max: 54C - Temperature min.: -35C - Volume: 31 litres Overpressure: - Pressure: 32bar - Temperature max: 65C - Temperature min.: -35C - Volume: 3.25 litres

KHS Seitz high vacuum filler for vicous products Type: Seitz wich with 12 filling valves solo machine complete recondizioned