128,272 used machines on RESALE, but how to find them? Machine Search
Arburg 320C 600-250 / Machine in very good technical condition Year of Make: 2001 Injection unit: Screw diameter: 35 mm Injection weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 60 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Very good technical condition Machine has produced injection molded parts for the medical industry - pure production conditions Core train control Hardened injection unit - Bimetal Built-in sorting flap Dimensions: Weight: 2330 kg Length/Width/Height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests ...
Arburg 370S 600-70 Year of Make: 2008 Injection unit: Screw diameter: 25 mm Injection weight: 40 g Spray pressure: 1550 bar Dosing volume: 44 ccm Clamping unit: Clamping force: 60 t Tiebar spacing: 370x370 mm Size of the clamping plates: 510x510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 8 Hydraulic core pull x 1 Control with hot runners x 6 Hardened injection unit - Bimetal Built-in sorting flap Integrated original Arburg sprue picker on the side Possibility of adjusting the vertical injection unit with the help of special brackets It is possible to change the screw diameter to 22, 25 or 30 mm Dimensions: Weight: 3160 kg Length/Width/Height: 3.48x1.46x2.03 m All offered machines are started by our service technicians before they are sold. It is possible ...
Used Used Monoblock GAI 6020: Year: 2005 Condition: Good Used Monoblock GAI 6020: Model: 6020 Year: 2005 Speed: 2000 BPH Direction: Linear Manual head adjustment 2 heads Type of capsules: ? PVC-thermal head ? Polylaminate LABELLER 2 stations Adhesive Applicable labels: ? Front ? Back Sizes of the diameters of the supported bottles: Bordeaux 0.75 lt Safety protections Code: EA 645 More details: https://bottlingscout.com
The machine is in good technical condition, after prior agreement it is possible to test it. Workpiece weight (max.): 1,000 kg X-axis travel distance: 600 mm Y-axis stroke: 400 mm Z-axis stroke: 310 mm Wire diameter (max.): 0.3 mm Workpiece height (max.): 310 mm Width (max.): 1,050 mm X-axis feed: 600 m/min Y-axis feed speed: 1,000 m/min Table load: 1,000 kg Equipment: refrigerator, compressor
The hydraulic automatic tilting kettle with a capacity of 600 liters is designed for professional use in the food processing industry. The hydraulic tilting system ensures easy and safe emptying of the contents. The double jacket with thermal oil provides even heat distribution and precise temperature control, making it suitable for cooking, mixing, and thermal processing of soups, sauces, jams, creams, and ready meals. Manufactured from high-quality stainless steel, it ensures durability, hygiene, and long service life. Technical specifications: Hydraulic automatic tilting kettle Manufacturer: Sind With cover Double jacket- thermal oil Volume: 600 liters Power: 30.7kW Made out of stainless steel Machine dimensions in cm: Length: 205 Width: 158 Height: 123
General SKU442X1414 LocationBarneveld MakeLödige TypeMGT 600 Main Features MaterialStainless steel Volume530 Ltr. Motor45 KW Specified Features - Universal mixer MaterialStainless steel 1.4301 (304) Universal mixercheck Capacity530 l. Vessel sizesø 1088 x 570 mm With covercheck InletDN240/150 Pneumatic operated outletcheck OutletDN200 With motor45 kW, 400 V, 3000 rpm Rotor speed208/1500 rpm With lump breakercheck With motor5,5 kW, 400 V, 3000 rpm Rotor speed3000 rpm Information Mach.No.M24206 Year of construction1998 Mounted on framecheck With switchgearcheck Floorspace2,70 x 1,25 m Total height2,10 m Weight2700 kgUniversal mixersNew arrivalsLoedigeMixers > Universal mixersNew arrivalsBrand > Loedige What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide - ...
This 3-axis TRUMPF Trumatic 600L was manufactured in 1996. It features a maximum punching force of 220 kN and a laser power of 1,500 W, making it suitable for various applications. With a machine weight of 18,000 kg, it offers robust performance. If you are looking to get high-quality punching and laser capabilities, consider the TRUMPF Trumatic 600L punch-laser combination we have for sale. Contact us for further details.
Hello, We hereby offer you a walk-through metal detector of the manufacturer CEIA, type SDM 600 PLUS/PZ (stock goods) of the manufacturer CEIA. Manufacturer CEIA GmbH, Wiesbaden, Germany Type SDM 600 PLUS/PZ, with integrated, highly sensitive MI2/MSD sensors in both antennas Year of purchase 2022 Possible areas of application: Security checks at airports, cargo facilities, government and correctional facilities, government, industry and nuclear power plants, major public events, trade fairs, congresses, checkpoints, access controls in high-value areas, etc. Technical data and description: Very high passenger throughput with a speed of up to 15 m/s and a reset rate of 0.2 s. High rate of discrimination against personal items (glasses, belts, keys, watches, coins, etc.) meets the strict standards of airport security checks. Compliant with the NIJ-0601.02 law enforcemen ...
Type: OptiFlour 600 II Serial number: 2215 Year of construction: 2013 Belt width: 600 mm Power: 3 x 400V, 50Hz, 5.3kW Dimensions: 2750 x 1650 x 2300 mm Weight: 1025 kg GEA OptiAir cyclone Type: OPA Serial number: 515 Year of constuction: 2011 Power: 3 x 400V, 50Hz, 4kW Dimensions: 1350 x 950 x 1800 mm Weight: 450 kg
Type: 604-518 Serial number: 120002743-10 Year of construction: 2018 Drum: 1.3 mm Compressed air: 6 Bar, 50 l/min Power: 3 x 415V, 50Hz, 8.5kW Dimensions: 1500 x 1700 x 2400 mm Weight: 1460 kg Working hours: 1465 hours With hopper and tamping device
EXERON DIGMA HSC 600 milling center was built in 2010 in Germany by Exeron GmbH. It is an extremely versatile yet compact machine designed for the production of precision tools and moulds. A number of state-of-the-art technical solutions, combined with extensive equipment, guarantee excellent repeatability of the manufactured parts over many years of intensive operation. The EXERON DIGMA HSC 600 is distinguished by its extremely rigid gantry structure, made of polymer concrete. The entire workspace has been fully maximised to ensure maximum freedom of operation. It features all the necessary equipment, i.e. a reliable electro-spindle, a 30-position tool magazine and a large work table with a length of 900 mm and a width of 550 mm. The machining process is performed fully automatically in HSM (High Speed Cutting) technology. This technology allows a significant reduction in cycle ti ...
This 3-axis DAEWOO ACE V 600 was manufactured in 1997. It features an impressive X-axis travel of 1,260 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine includes a robust table size of 1,400 x 700 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the DAEWOO ACE V 600 vertical machining centre we have for sale. Contact us for further details.
A welding turning device Jucat, consisting of two parts with the workpiece in the middle, is available. Design: 2-column system, max. load capacity: 6000kg, rotation torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. rotational speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Without blinds. Documentation available. An on-site inspection is possible.
A welding turning device Jucat consisting of two parts with the workpiece in the middle is available. Design: 2-column system, max. load capacity: 6000kg, rotational torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible.
TECO Office 600 All FUll time surge protection
pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 850 mm grinding length: 6000 mm centre height: 425 mm grinding wheel size: 750 x 100 x 305 mm table - swivable: -2 / +2 Grad table load capacity: 3000 kg chucking diameter: 315 mm grinding head swivelling: 90 Grad spindle taper MT: 6 spindle speeds: 12 -300 mm grinding head - power requirement: 22 kW Control: Siemens 840D grinding wheel head adjustable: +30 / -10 ° total power requirement: 41 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 16,0 x 4 x 2,1 m - Siemens Sinumerik 840D CNC control - SBS balance system - INTERNAL GRINDING DEVICE - 4 support steady rests - Tailstock - Coolant system - Electronic hand-held control panel - Ball screws X-Z - Pneumatic quill stroke - Paper belt filter device - Oil mist extraction device - Full protective cover The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1400x1300x1800 mm Weight: 0 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity 2.7T /6000 lbs. Stroke 1403 mm weight 77.5t
Forklift hydraulic/manual operations, max load wight 600 kg
CNC controlled cutting table for flat glass sheets 6000 x 3210 mm. With topiary and model catalogue. The glass panels are placed on top by means of swivelling arms. Power consumption 20 kW, dimensions 9200 x 4500 mm
Transnorm leading feed belt conveyor with overdrive GF 1720/1700/1650/1200/1000-700/600-600/500 RA2468 (NL-NB-GuB) Technical data: Conveyor length (NL): 1720, 1700, 1650, 1200, 1000 mm frame width (NB): 700 or 600 mm belt width (GuB): 600 or 500 mm Overall height (BH): 80 mm Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Drive: overdrive Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: Übertrieb scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-m ...
Used Polin skin pass machine with rotary bar. Price without accessories - but can be provided by us at any time, Machine is in working order. Instruction manual available.
General SKU300U1007 MakeHeraeus LocationBarneveld CEcheck TypeVT6025 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume25 Ltr. Max.temp.200 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature200 °C Number of compartments:1 Capacity25 Ltr. Internal width300 mm Internal depth307 mm Internal height275 mm Electric heating1,3 kW Number of doors:1 MaterialStainless steel Information No.97106865 Year of construction1997 Floorspace0,48x0,45 m Total height0,60 m Weight60 kg Extra SpecificationsChamber dim. 300x275x307 mm, volume 25 ltr, temp range max 200°C, klasse 2Drying ovensThermo Scientific HeraeusDryers > Drying ovensBrand > Thermo Scientific Heraeus What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ...
Inv. Num. : 8988 Type: HD 16-6000 Producer: TOS Created: 1957 Parameters: Frame passage: 1600 mm Planner length: 6000 mm Weight: 20000 kg
used
B&A REF: 9254 TON: 60 SHOT WEIGHT: 151 STROKE VOLUME: 166CM3 INJECTION PRESSURE: 1235AR PLATEN SIZES: 650 X 650MM DBTB: 360 X 335MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 400MM MAX DAYLIGHT: 650MM EJECTOR STROKE: 80MM CONTROLS: ALPHA 2 MOTOR: 11 SERVO HEATING CAPACITY: 7.7KW SCREW DRIVE: HYDRAULIC
(1986) 600t Gräbener Knuckle-Joint Press Fully Automated High-Precision Short-Stroke Forming This knuckle-joint press delivers a nominal force of 600 metric tons, designed for high-precision forming applications requiring controlled force near bottom dead center. Technical Details Machine Type: Knuckle-Joint Press Model: GK 600 Nominal Force: 600t Year of Manufacture: 1986 Rated Force Travel (Pressing Path): 1.7 mm Nominal Work Capacity: 10,200 Nm Stroke: 100 mm Stroke Rate: 45 strokes/min Shut Height (Max. Die Space): 360 mm Tool Holder Adjustment: 50 mm Clearance Between Uprights: 580 mm Table Area (Width x Depth): 550 mm x 430 mm Tool Holder Shank Hole (Ø x Depth): 65 mm x 105 mm Motor Output: 15 kW Motor Speed: 1,500 rpm Pneumatic Connection Pressure: 5.5 bar Operating Voltage: 3x 380V / 220V, ...
A CNC tube welding system Weil Technology for longitudinal seam welding is available. Tube diameter range: 76mm-600mm, Tube length range: 250mm-1550mm, Material thickness range: 0.8mm-2mm, Welding process: Laser, Max. welding output: approx. 80pieces/h. Documentation available. An on-site inspection is possible.
CNC machining center Emco, type VMC 600, built in 1998 incl. handwheel + 3 vices with clamping device
This 4-axis Okuma MA 600 HB was manufactured in 2011, featuring a robust horizontal machining center design. It boasts X, Y, and Z axis travels of 1,000 mm, 900 mm, and 1,000 mm respectively, and a maximum spindle speed of 12,000 rpm. The machine includes a high-capacity 150-tool chain magazine with rapid tool change times. Consider the opportunity to buy this Okuma MA 600 HB horizontal machining center. Contact us for more information about this machine.
MELTER MARCHESINI DUMEK 600 L Melter used for the preparation of various products. Auxiliary unit for turboemulsifiers to heat the aqueous or oily phase, or as a preparation unit for some creamy products that do not require the functions of the turboemulsifier. Slow and/or rapid mixing systems available. Built in 2018. - Capacity: 600 liters - Material: AISI 316 stainless steel
(1988/2025) 600t Gräbener Knuckle-Joint Press Heavy-Duty 600-Ton Precision Forming Press - 2025 General Overhaul This Gräbener GKS 600 is a high-capacity knuckle-joint press designed for demanding metal-forming tasks like cold forging, embossing, and heavy-duty coining. It was manufactured in 1986 and has undergone a complete general overhaul in 2025, ensuring modern reliability while maintaining its massive 6,000 kN nominal force. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GKS 600 Nominal Force: 600t Year of Manufacture: 1988 (General Overhaul: 2025) Stroke Length: 160 mm Production Speed: 35 strokes per minute Nominal Energy: 10,200 Nm Nominal Force Path: 1.7 mm Frame Width: 580 mm Table & Tooling Dimensions Table Surface (W x D): 550 mm x 620 mm Ram/Tool Holder Surface (W x D): 550 mm x 430 mm S ...
- FAGOR 2 Axis Dro - Feed all directions - Conical turning attachment -
Year of manufacture 1989 Stacking lift Stacking board buffers Tub system photoelectron. Stack Scanning Delivery date: immediately
A Kittner food conveyor is available. Width: 600mm, total length: 8300mm, motor power: 370W, belt speed: 6.6m/min, angle: 31.5°, conveying height: 3300mm. Documentation available. An on-site inspection is possible.
cutting dimensions max.: 600 x 1000 mm plate thickness: max. 3 mm cutting angle: 1,5 ° side stop electrical adjustable: 0 - 1010 mm rear stop electrical adjustable: 0 - 610 mm no. of strokes: 60 Hub/min total power requirement: 14 kW weight of the machine ca.: 8,7 t dimensions of machine L x W x H: 2,5 x 2,18 x 2,3 m Accessories: sheet metal stacking device on rails The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
DAINIPPON SCREEN DIRECT SCANAGRAPH SG-608 II Technical data see photo -Mounting device -2 storage cylinders The system has been upgraded for electronic image transmission. Data imput directly on Macintosh, screen and programs (Photoshop) etc. are included. (A new Mac version was needed for the image editing.) On request, a second scanner of the same type can be provided free of charge for any spare parts.
A CNC large-format rigid-bed milling and boring center Soraluce is available. Travel X/Y/Z: 4500mm/1600mm/1300mm, table dimensions X/Y: 6000mm/1100mm, max. table load: 5000kg/m², spindle bearing diameter: 90mm, tool holder: ISO 50, speed: 5000rpm, power: 43kW/32kW, rapid traverse: 35m/min, feed force: 16kN, coolant volume: 350l, delivery pressure: 5bar, tool positions: 40. Machine dimensions X/Y/Z: approx. 8700mm/5000mm/3850mm, weight: approx. 22000kg, control: Heidenhain. Including IKZ, chip conveyor, probe, tool probe and cooling unit. Documentation available. An on-site inspection is possible.
Transnorm conveyor belt GF 1740-600-500 RA2478 Technical data: Conveyor length (NL): 1740 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.53 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 1740 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 Conveyor speed m / s: 0,53 scope of delivery: without supports and side guides Für eine ...
Key data: 500 mm, 100 mm, 2500 1/min
Special price to be submitted at short notice
Sandblasting machine Cassani STL A-600/2TR 2 turbines Sandblasting machine Cassani STL A-600/2TR 2 turbines
A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.
Unused Protein Application Separator. Year: 2023. Self cleaning. The Alfa Laval HBPX range is used to separate animal whole blood into two fractions; red cells haemoglobin and plasma, with the target to recover blood plasma in the best possible quality at maximized yield. Typical separation applications are fish and seafood processing, meat and poultry processing and pet food processing. Machine comes with the bowl, motor (37 kW), motor cover, baseplate / foundation plate with feet, OWMC water valve (Operating Water Module Compact), cyclone, all inlet / outlet pipes with pumps, service tools with pressing tool for maintenance, control panel with Siemens Simatic S7-1500 PLC + Touch Screen user-friendly HMI to monitor and control the separation process parameters, big set of commissioning spares with 4x extra discs and all manuals. Including process & service liquid unit, mounted on a sepa ...
Planetary mixer Hobart H 600 60 litre stainless steel kettle with 1 whisk and 1 flat beater Connection 400V, 16-CEE plug Used machine from the bakery
maximum number of results exceeded
please refine your search
