127,837 used machines on RESALE, but how to find them? Machine Search
Transnorm conveyor belt GF 14200-600-500 RA2445 Technical data: Conveyor length (NL): 14200 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 14200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstat ...
Transnorm conveyor belt GF 7200-600-500 RA2448 Technical data: Conveyor length (NL): 7200 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 7200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstat ...
Transnorm conveyor belt GF 13900-600-500 RA2450 Technical data: Conveyor length (NL): 13900 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Small 25mm pulley for low-gap transfer Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 13900 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW ...
Transnorm Rising falling Incline with forerun belt conveyor GF 6000+800-600-500 RA2449 Technical data: Conveyor length (NL): 6800 mm (800 mm forerun + 6000 mm incline) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R27 DT80N4/BMG/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6800 ( 6000 + 800 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eu ...
Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Memory-Funktion Weinig Powermat 600 Compact ---------------------------------------------------------------------- The machine has been cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----------------------------------------------- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine ...
JCB 525-60T4 Telescopic Loader, - Year of construction: 2019, - Net weight: 5320 kg, - Lifting height: 6 m, - Range: 3.5 m, - Load capacity at LSP: 2.5 t, - Motor power: 55 kW
Transnorm Rising falling Incline belt conveyor with leading belt GF 5800+1000-600-600 RA2454 Technical data: Conveyor length (NL): 6800 mm ( 5800 mm riser segment + 1000 mm forerun) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,35 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6800 ( 5800 + 1000 ) Nominal / outside width in mm: 600 Belt width in mm ...
Transnorm conveyor belt GF 15683-600-500 RA2452 Technical data: Conveyor length (NL): 15683 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,35 Drive: SEW gear motor, R27 DRE80M4/MM15/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 15683 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / s: 0,25 scope of d ...
Transnorm conveyor belt GF 6920-600-500 RA2453 Technical data: Conveyor length (NL): 6920 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.35 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6920 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / s: 0,35 scope of delivery: without sup ...
0: 600 x 800 mm Motor output: 15 kW 0: 0,6 m³ Diameter of the motor: 260 mm Dimensions (L/W/H): 1.805 x 1.118 x 1.646 mm Weight: ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ------------------------------------ Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 8 ...
The machine is in good technical condition, testing possible after prior agreement. 3 AXES, Heidenhain ITNC 530 control system.
UV DRYER GIARDINA FOR HEIDELBERG 52 -Max size 36x52 cms. -UV dryer Giardina model 601/2 Year 1998, totally programmable -Low pile delivery, 2 UV lamps installed 600 W each -Air extraction motor, pipes -Max power 22 KW, 51 Ampere -2,5 meters length
Manufacturer: ESC Model: ESC-AT-60PD Type of Machine : Screen Printing Machine Semi-automatic, universal, digitally controlled precision screen printing machine for flexible and rigid materials up to 200 mm material thickness STANDARD EQUIPMENT/FEATURES - Programmable PLC control system - User-friendly operation via touch screen - High-quality linear guides for smooth, low-noise motion - Vertical, motor-driven screen frame lifting with synchronized stripping motion - Precision print head with pneumatic lift for screen change and cleaning - Digital input of desired print parameters: - Speed for print and flood squeegee - Print height - Print stroke length - Neutral position for print and flood squeegee - Single-function control for setup operation - Single-cycle operation via foot switch and automatic cycle mode - Extremely short setup times without the need for tools - Pneumatic scr ...
For sale is a MAHO MH 600 P universal tool milling machine with Heidenhain TNC 135 control. The machine comes from German quality production and is ideal for toolmaking, single part and small series production as well as training companies. The milling machine is robustly designed, precise and versatile. The universal design allows both horizontal and vertical machining to be carried out. Technical data: Manufacturer: MAHO Werkzeugmaschinenbau Model: MH 600 P Control: Heidenhain TNC 135 Travels: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Table size: approx. 250 × 1000 mm Spindle speed: approx. 50 – 2500 rpm Feed: infinitely variable Connection voltage: 220 / 380 V, 50 Hz Machine weight: approx. 1,900 kg Equipment: Universal milling head Automatic feeds Heidenhain Digital Display / CNC Control TNC 135 C ...
A Schenk Orion filter press with a deflection chamber is available. Number of plates: 85, frame: 100, plate dimensions X/Y: 600mm/600mm, max. filter area with 80 plates: approx. 22m², pipe connection diameter: 50mm, throughput capacity: approx. 30hl-45hl/h, max. throughput capacity: approx. 75hl/h. An on site inspection is possible.
Key data: 480 mm, 2000 mm, 3050 1/min
Stock number: 4009 CNC LATHE Manufacturer: Gildemeister , Type: CTX 600 Machines NO.: 361238, Year of manufacture: 1997 Specifications: Max. circumferential diameter 480 mm dia. Max. turn. About Bed 650 mm Dia. Turning length 2000 mm Main motor power 27 kw Main spindle speed range 4-3050 rpm Tool turret with 12 stations Powered stations revolver 1 6 pieces. Control Gildemaister EPL Fabr. Accessories: Hydr. Chuck main spindle 400 mm dia Tool holder vdi 50 Driving angle tools 2 pieces Driving Tools Straight 2 pcs. Various tool holders. 15 Chip conveyance. Cooling water system. Length: 4000 mm, Height: 2100 mm, Width: 2500 mm, Weight: 9100 kg
The Flexa 607 automatic edge banding machine is an extremely versatile machine with a high performance that puts it at the top of its category. Productivity: The high machining speed of up to 22 m/min ensures high productivity in all working conditions. The XE version with controlled axes enables extremely fast and precise machine setup. Flexibility: The optional equipment of the machine with a belt press allows the processing of any type of material. FLEXA 607 / 607 XE Panel height 10 (13) ÷ 60
Shear force 60 t Punching force 40 t Profile steel shears L- and T-irons at 90° 100 x 10 mm at 45° 65 x 8 mm Notching device with square notch for sheet metal up to 10 mm Flat steel shears for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - Electrical contact stop 3000 mm - Anchor table - Adjustable hold-down device - Tool package Validity of the security check until Feb. 2026
Transnorm conveyor belt GF 16600-700-600 RA2455 Technical data: Conveyor length (NL): 16600 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,35 Drive: SEW gear motor, R27 DT90S4/TH Electrical data: 50Hz V380-500, kW 0,5 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 16600 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s ...
2 x poles BAZ Manufacturer: DMG Type: DMP 60s BJ: 2004 and 2003
General SKU212T470 MakeDidier Filtertechnik GMBH LocationBarneveld CEcheck TypeMSF 600/F Pressure Working pressure6 Bar Main Features MaterialStainless steel Pressure6 Bar Vacuumcheck Surface3.1 m2 Specified Features - Horizontal plate filter Filter surface3,1 m² Horizontal plate filters Filter presscheck Filter surface3,1 m² Stainless steel platescheck Number of platens12 Internal platen sizesDia: 564 mm External platen sizesDia: 604 mm Platen thickness48 mm Frame thickness38 mm Cake capacity112 Ltr. Central inletcheck ConnectionsDN 25 (2x) With outlets on platenscheck With hand valvescheck Hydraulic closingcheck With hydraulic unitcheck manual Mechanical closingcheck MaterialStainless steel 1.4571 (316Ti) Information No.HW-16657 Year of construction2003 Mounted on wheelscheck Floorspace1.5x1 m Total height2,4m Weight1000 kgHorizontal plate filt ...
Offer 25276 Extraction filter system / stationary filter system with wet separator Technical data: - Suitable for moist sticky dusts, metallic grinding - with strong flying sparks - Single + multi-station extraction - Volume flow approx. 5150 m³/h. - Water capacity 390 l - Drive power 400 V / 7.5 kW - Required space W 1250 x H 3650 x D 1100 mm - Weight approx. 550 kg
Transnorm conveyor belt GF 12500-600-500 RA2097 Technical data: Conveyor length (NL): 12500 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R27 DT90S4/Th Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 12500 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Ze ...
liter capacity: 600 l Pressure of pump: 2 / 3 / 40 bar control: Schütze / Contactors total power requirement: 11 kVA weight of the machine ca.: 450 kg dimensions of the machine ca.: 1,80 x 1,35 x 1,70 m Coolant System INTERLIT (DMG) - BFA 600-A/40/2/3 50/60 HZ - Very good condition - Connected to DMU 50 3rd Edition - Controllable via contactors - Incl. paper belt filter - Number of pumps: 3 - Pump capacity: 0.63 kW, 2,750 rpm (50 Hz), 60 l/min, 20 m 2.89 kW, 3.75 HP, 2,880 rpm (50 Hz), 24/22-30/27 l/min 3.10 kW, 4.20 HP, 2,930 rpm (50 Hz), 160 l/min, 40 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1100 KW, 983 kVA, 10000 V
Deutz / MWM Landfill Gas CHP Plant TBG 604 CV16 Landfill gas electricity and heat generator from 1998, unknown operating hours, with control, radiator and silencer 983 KWel x 1,500 rpm, 10,000 V/50 Hz. AC Generator: Stamford HVSI814C2, 983 KVA Manufacturer: Deutz / MWM Model / Engine: TBG 604 CV16 Type: Gas Engine (Landfill Gas) Serial number: G 808288 Power [KWel]: 983 Engine power [KW]: 1,100 Year of Make: 1993 Operating hours: unknown Weight gene set [kg]: 12,180 Dimensions LxWxH [m]: 5.1 x 1.7 x 2.1 AC Generator Stamford HVSI814C2 Manufacturer: Stamford Model No.: HVSI814C2 Type: AC Synchronous Generator Serial Number: C850153701 Power [KVA]: 983 Voltage [V]: 10,000 Frequency [Hz]: 50 Current [A]: 56.75 Speed [1/min]: 1,500 Year of Make: 1997 Weight [kg]: 4.600
Stüer conveyor system Roller conveyors 16950-620-600 RA2456 Further information Manufacturer: Stüer Type: Roller conveyor Condition: good (used) Conveyor length (NL): 16950 mm, 6 elements between 1700 and 4200 mm, Roller width (RB): 600 mm Nominal/outer width (NB): 620 mm Frame height: 140 mm Overall height including motor: 240 mm Roller pitch: 75 mm Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.5 m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-415 condition: gut Conveying length in mm: 16950 Nominal / outside width in mm: 620 Roll width in mm: 600 Roll division in mm: 75 Driven: YES scope of delivery: mit Motor, without supports and side guides Für e ...
Stüer conveyor system Roller conveyors 15890-620-600 RA2457 Further information Manufacturer: Stüer Type: Roller conveyor Condition: good (used) Conveyor length (NL): 15890 mm, 3 elements Roller width (RB): 600 mm Nominal/outer width (NB): 620 mm Frame height: 140 mm Overall height including motor: 240 mm Roller pitch: 75 mm Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.5 m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-415 condition: gut Conveying length in mm: 15890 Nominal / outside width in mm: 620 Roll width in mm: 600 Roll division in mm: 75 Driven: YES scope of delivery: mit Motor, without supports and side guides Für eine individuelle, fachmän ...
centre height: 250 mm centre distance: 600 mm Dimensions (L/W/H): 3600 x 1900 x 2100 mm weight of the machine ca.: 2,25 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 3000 mm y-travel: 2500 mm z-travel: 1000 mm Control: Siemens type: Sinumerik 840 D Feed: 5-30.000 mm/min Table area: 2000x2170 mm table load: 1500 Kg/m² T-slots: 22 H9 distance between uprigths: 2500 mm spindle turning speed range: 6000 U/min spindle drive: 36 kW spindle taper: HSK 100 Tool changer: 30 Rotary table: 2000 mm speeds: 250 U/min turning diameter: 2500 mm table load: 10 t Torque: 33000 Nm total power requirement: kW weight of the machine ca.: 45 t dimensions of the machine ca.: 8x6,4x4,4 m Gentry gantry milling machine with carousel rotary table Head change station Tool changer The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,0 ...
Cylinder vessel with double jacket (heatable), stainless steel 1.4571, length 4.9ß0 mm, diameter approx. 1200 mm, weight 2000 kg, vacuum resistant, longitudinally installed agitator shaft with brushes, agitator 2.2 kW approx. 20 rpm, inlet and outlet each front, condition: used, from plant dismantling (vacuum evaporator)
General SKU259P363 MakeScan-Vibro A/S (DEN) TypeTRK 600x300x2000 No.27511 Year of construction1997 Mounted on framecheck Main Features MaterialStainless steel Length2000 mm Width600 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder width600mm Feeder length2000 Feeder height300mm Closedcheck Inletdia.200mm Outletdia.200mm, dia.100mm With vibro motor(2x) 0,5KW, 400 Volt (Ex) Information LocationBarneveld Floorspace3,0x1,0 M Total height2,5 M Weight615 KG ATEX compatiblecheck Extra Specificationswith sieve 0.315x0.135 t = 0.2, with (3x) inspection hatch, Capacity 100 kg / h (p = 3.5 Kg / dm3) The bed is jacketed for cooling purposes Vibro feedersVAV Scan-VibroConveying systems > Vibro feedersBrand > VAV Scan-Vibro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to n ...
Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 14,040 mm Number of fields per row of shelves: 05 pcs. Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Pallet spaces per row of shelves: 45 pcs. Total pallet spaces: 45 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,100 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P73 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 3,600 mm Depth: 1,050 mm ...
temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: 22,500 mm Number of fields per row of shelves: 08 pcs. Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Pallet spaces per row of racks: 72 pcs. Total pallet spaces: 72 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,100 kg The scope of delivery includes: 09x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P113 Profile dimensions: 100 x 100 x 2 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 4,000 mm Depth: 1,100 mm 32 ...
A Stromab pendulum saw with swiveling saw unit and roller conveyors is available. Motor power: 7.5kW, saw blade diameter: 600mm, saw blade bore: 20mm, max. cutting height: 210mm, max. cutting length: 460mm, extraction port diameter: 150mm, roller conveyor length left/right: 2500mm/2500mm, roller conveyor width: 500mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.
Transnorm Rising falling Incline with arch and forerun belt conveyor 1000+10700+1000-600-500 RA2459 Technical data: Conveyor length (NL): 12700 mm (1000 mm forerun + 10700 mm incline + 1000 mm arch ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,5 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 12700 ( 1000 + 10700 + 1000 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodr ...
Key data: 5760 KW, 3450 V
Niigata Natural Gas Generators 2 × 2,880 kW / 60 Hz Two well-maintained natural gas generator sets manufactured by Niigata in 2005, each with an electrical output of 2,880 kW at 60 Hz. The plant was operated until 2020 and maintained in accordance with Niigata’s maintenance procedures. The most recent scheduled 30,000-hour major maintenance for both engines was completed in April 2019. At the time of shutdown, the total accumulated operating hours were approximately 31,000. The plant was professionally dismantled in 2022. The scope of supply includes the plant control system, all mechanical and electrical indoor auxiliaries, high-voltage circuit breakers, and motor control center (MCC) cabinets. Technical Data: Product Gas Engine Generators with auxiliaries Model Niigata18V22AG Electrical output 2880kWe Manufacturing year 2005 Rotation speed 900rpm Number of gensets ...
Offer 26037 Technical data approx.: - Plate length approx. 6000 mm - Plate width approx. 1800 mm - Top height without base approx. 360 mm - Top height with base approx. 870 mm - Thickness of the top plate approx. 75 mm - 6 T-slots in table surface length 6000 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. mm - T - groove depth approx. mm - Space required: L 6000 x D 1850 x H 870 mm - Weight approx. 11000 kg
General SKU330W710 MakeGEA Collette N.V. Typeultimagral 600 Mach.No.06G0600036 Year of construction2006 Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume600 Ltr. Motor37 KW Specified Features - Universal mixer MaterialStainless steel 1.4401 (316) Gral-granulatorcheck CapacityGross 600l, net 300-400l, 600kg Vessel sizesDia. 1100 x 700 mm With covercheck InletDia, 100mm, 45 mm, 30 mm Pneumatic operated outletcheck OutletDia. 250mm With jacketcheck With motor37kW (400/690 V, 1480 rpm) With variable speed drivecheck Frequency controller With lump breakercheck With motor15kW (400/690 V, 2900 rpm) Information Mounted on framecheck LocationBarneveld With switchgearcheck (as is) CEcheck Extra Specificationsscope of this machine: - Collette Ultimate Gral 600. - system for cleaning (CIP) with 2x Milton pumps. - vacuum pump, Busch, ty ...
Dough sheeter Fritsch 600 used dough sheeter Fritsch 600 with digital control and automatic reel from 2008 for sale and immediately available in our warehouse in Bielefeld. Dough sheeter Fritsch 600 - Stainless steel dough sheeter Fritsch Rollfix - with reel - With touch display - 60 or 65cm bandwidth - Year of construction 2008
Overbeck Rising falling Incline belt conveyor with overdrive vorrun GF 800+5260-600-500 RA2461 Technical data: Conveyor length (NL): 6060 mm ( 800 mm vorrun + 5260 mm riser segment ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 120 mm, 360 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0.5 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 100 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides leading belt with overdrive Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6060 ( 800+5260 ) Nominal / outside wi ...
Overbeck Rising falling Incline belt conveyor with arch GF 600+5460-600-500 RA2460 Technical data: Conveyor length (NL): 6060 mm ( 600 mm arch + 5460 mm riser segment ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 120 mm, 360 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0.5 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 100 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides leading belt with overdrive Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6060 ( 600 + 5460 ) Nominal / outside width in mm: 6 ...
We offer: Pallet racking, new Manufacturer: STOW is available several times. Scope of delivery for: 180 parking spaces other quantities also possible. 16 stud frames, approx. 6,000 x 1,100 mm 90 editions, approx. 2,700 x K125 x 50 x 1.5 mm 180 locking pins 32 Ground Anchor M 12 Technical data: Shelf height: approx. 6,000 mm Shelf depth: approx. 1,100 mm Max. load capacity per field: approx. 12,000 kg Max. load capacity per pallet: approx. 1,000 kg Max. load capacity per pair of trusses: approx. 3,000 kg (with evenly distributed load) Colour of the frames: blue Colour of the trusses: orange Shipping: Cheap shipping possible with inexpensive forwarding agent. Please inquire about the freight costs, stating your zip code and location as well as the desired item quantity. We offer a comprehensive range of new and used shelves and accessories and we ...
General SKU326X670 MakeAllgaier TypeVTS-600/2 No.268 Year of construction1986 LocationBarneveld Main Features MaterialStainless steel Surface1.13 m2 Sizes diameter600 mm Specified Features - Vibro sieve MaterialMild steel, Stainless steel 1.4552 Vibro sievecheck Sieve surface1,13 m2 Number of sieve decks:1 Sieve sizesDia. 600 mm With covercheck InletDia. 160 mm OutletDia. 90 mm Drive vibro motorcheck Motor0,3 kW, 415 volt, 1460 rpm Sieve perforation0,1 mm With ball cleaningcheck With extra sieve decks0,3 mm Information Mounted on mild steel framecheck With switchcheck Floor space0,95x0,95 m Total height1,0 m CEcheckVibro sievesAllgaierSieves > Vibro sievesBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect th ...
The Ilpra FS 6000 is equipped with twin stages of all stations, the filling heads are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Ilpra cup fillers are mainly driven by a main motor and signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request., Make: Ilpra , Model: FS 6000, Capacity: 4800, Year of Manufacture: 2003, Filling Volume: 50-500 ml per cup , Cup Dispenser: Automatic twin dispenser , Filling: Twin Filling Heads , Filling Specs: Fruits up to 1 cm pieces , Sealing: Twin Heat Sealing Station , ...
Technical data: Circumferential diameter: 680 mm Center width: 1000 mm Speed: 2800 1/min Chuck: ø300 mm Dimensions, approx.: 5560 x 2400 x 2130 mm Weight, approx.: 10,000 kg Equipment: - Control: Heidenhain CNC Pilot 4290 - 12-speed revolver VDM 40 - C-axis
pressure: 330 t chamfer lenght: 6100 mm distance between columns: 5600 mm Control: Cybelec VisiTouch 24 stroke: 300 mm dayligth: 500 mm : 160 mm/s bending speed: 0-9 mm/s total power requirement: 32 kW weight of the machine ca.: 36.000 kg dimensions: 6970 x 2300 x 4150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=1.78 m, Overall length= 1.15 m, Overall width= 1.18 m, Net weight= 552 kg,
maximum number of results exceeded
please refine your search
