60 hz used for sale

A vertical carousel storage system (office lift) Hänel with front access is available. Trays: 18, tray arrangement: 4-lane, max. stack load per tray: 132kg, machine dimensions X/Y/Z: approx. 3300mm/1000mm/2850mm, weight: approx. 3000kg, control: MP0A. Documentation available. An on-site inspection is possible.

Cluma 10 ton x 18 600 mm Kind of: overhead travelling crane Capacity: 10 ton Span: 18 600 mm

A 2000 Roeders RFM 600/2 is a high-precision, High-Speed Cutting (HSC) vertical machining center. Technical Specifications This machine is defined by its high spindle speed and specialized control system: FeatureSpecificationSpindle SpeedUp to 42,000 RPM (typically a Fischer HSK-E40 spindle)X / Y / Z Travels600 mm / 450 mm / 300 mmControl SystemRoeders RMS6 (PC-based, known for high data processing speeds)AccuracySub-micron resolution; designed for minimal thermal expansionTool Changer18-position Pick-up station (standard)Machine WeightApprox. 5,200 kg (11,400 lbs) The machine is powered up, checked and started weekly – it is fully functional, without defects and without start-up problem reports. Here are the key specifications: Manufacturer: Röders Type: RFM760-099 Software: RMS6V3.15 (211) Machining range: 760 x 550 x 300 Table size: 860 x 550 Year of manufacture: 2000 P ...

Manufacturer: Rösler Model: RBD 600-2/4 Year of Manufacture: 2007 Technical Data Connection Values / Power Requirements - Supply Voltage: 3 x 400 V - Compressed Air Quality: Cleaned, dried, oil-free, filtered, filter 40 um, residual moisture at 20 C less than 30% - Ambient Temperature / Humidity: +5 C to +40 C, per DIN 40040 G (annual average less than 65%, within 60 days less than 85%) - Blast Media Fill Quantity (kg): approx. 1500 - Required Dust Extraction Capacity (m3/h): 5600 Dimensions / Weights - Length (mm): 12400 - Width (mm): 3800 - Height (mm): 2300 - Weight of Heaviest Single Component (kg): 6000 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Working dimensions X/Y: 2000mm/1500mm, max. clearance height: 70mm, max. material width: 1690mm, speed: 2m/min, acceleration: 18m/s², resolution: 0.001mm, accuracy: +/-0.05mm, repeatability: +/-0.05mm, laser source: Rofin ScX series 300W, laser class: 1, laser power: 300W. The laser source is defective. Including shuttle table, cooling unit, hydraulic unit and register mark recognition camera. Documentation available. An on-site inspection is possible.

General SKU388X980 LocationBarneveld MakeSeitz Enzinger Noll Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Surface0.26 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface0,26 m² Capacity143 l. Vessel sizesDia. 600x500 mm Plate sizesDia. 580 mm Vessel can be tiltedcheck Top connectionscheck Liquid outletDN30 With jacketvolume 6,8 l. Max. temperature165°C Motor9 kW, 380 volt With hydraulic unitcheck MaterialStainless steel 1.4571 (316Ti) With jacketcheck General TypeTerra 60125 CWF Mach.No.14102 Year of construction1983 Mounted on legscheck Mounted on wheelscheck Floorspace1,40x0,95 m Total height1,90 m Weight830 kg Extra SpecificationsWith hydraulic bottom opening and closingGeneric medicinesFine chemicalsOther chemicalNutsche filtersBiotechnologyAgrochemica ...

Inv. Num. : 8956 Type: Easy Cut 6001.20PG Producer: MicroStep Created: 2006 Parameters: Control system: MSNC 500 Work table length: 6000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 38 mm Plasma source: Formica 163 W Machine weight: 2700 kg

General SKU321X549 MakeLödige TypeFKM 600 D LocationBarneveld Pressure Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume600 Ltr. Motor23 KW Specified Features - Powder turbo mixer Powder turbo mixercheck T-arms5x Capacity600 l. Trough sizesDia. 800x1200 mm InletDia. 250/350 mm Inspection hatch2x 460x380 mm Outlet250x180 mm With jacket37 l. Max. temperature110°C Glands air purgedcheck Motor15 kW, 380 volt, 1460 rpm Speed mixing shaft1460 rpm With lump breaker2x Motor2x 4 kW, 220/380 volt, 2893 rpm Speed lumpbreaker2893 rpm MaterialStainless steel 1.4552 With jacketcheck General No.10637 Year of construction1983 Mounted on framecheck Floorspace2,40x1,20 m Total height2,20 mPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOth ...

For Sale: Automated Film Wrapping and Strapping Packaging Machines 1. Film Wrapping and Shrink Packaging Machine — CMB 600 Manufacturer: CMB Model: 600 Description: Automated film‑wrapping and shrink‑packaging machine designed to wrap products in suitable plastic films, seal them, and optionally shrink them for stable, transport‑ready bundles, operating with multiple modules, safety systems, and format‑adjustment options. 2. Automatic Strapping Machine — RQ-8X Manufacturer: StraPack Corp Model: RQ-8X Automatic Strapping Machine Description: An automatic strapping machine that applies, tensions, and seals polypropylene straps around packages to secure them quickly and consistently. Benefits of Combined System Together, both machines serve to stabilize, protect, and prepare goods efficiently for storage or shipment through reliable wrapping and strapping processes. F ...

General SKU330W713 LocationBarneveld MakeDiosna Main Features MaterialStainless steel Volume600 Ltr. Motor38 KW Specified Features - Universal mixer Universal mixercheck Capacity600 L Vessel sizesdia. 1200x750mm With covercheck Inletdia. 125mm Pneumatic operated outletcheck Outletcheck With motor38 kW 400 volt (Ex) Rotor speed60/120 rpm With lump breakercheck With motor7.5 / 9 kW 380 volt Rotor speed1500/3000 rpm MaterialStainless steel 1.4552 General TypeP-600 Mach.No.238-027 Year of construction1993 Mounted on framecheck With switchgear(as is) Floorspace2x1 m Total height1.45 m Weight2650 kgPaints & coatingsUniversal mixersPowdered foodsGeneric medicinesCatalysts & fillersDetergent & surf.CosmeticsFood additivesLubricants & oleoConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicDiosnaIndustries > Chemical > Paints ...

General SKU302M515 LocationBarneveld MakeFERRUM-AG TypePOR-1250 No.47-1222 Pressure Working pressure4 Bar Main Features MaterialStainless steel Inlet diameter1250 mm Specified Features - Basket centrifuge Basket centrifugecheck Basket sizesdia.1250x630mm Wall thickness12mm Max. loading weight400 KG Hydraulic drive(excl.) Max. basket speed950 Rpm MaterialStainless steel 1.4435 (316L) General Year of construction1982 Floorspace2,2x2,1 M Total height2,3 M Weight3600 KGPowdered foodsGeneric medicinesFine chemicalsBasket centrifugesStarchOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesE-waste & metalFood additivesSugarConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicFerrumIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine ch ...

General SKU237W266 MakePhartec Krause TypePhartec RO600-2 St Year of construction2001 LocationBarneveld Main Features MaterialStainless steel Motor4 KW Specified Features - Miscellaneous filter CapacityPermeability 700 l/h CapacityConcentrate discard 300 l/h Miscellaneous filters MaterialStainless steel 1.4404 (316L) General Floor space2,0 x 0,80 m Total height1,75 m Weight650 kg CEcheck Extra Specifications- water quality 3,0 µS- control cabinet :as is:- Grundfos water pumps, type CRN 3, cap. 3 m3/h, 2,20 kW- Grundfos water pumps, type CRN 2, cap. 2,5 m3/h, 1,50 kW,- 2 filters-6 pressure pipesOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pha ...

General SKU202T023 LocationBarneveld CEcheck MakeLoedige Pressure Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume600 Ltr. Motor30 KW Specified Features - Universal mixer Universal mixercheck Capacity600 ltr With covercheck Inlet150 mm Pneumatic operated outlet200 mm Max. temperature110 Degr. C With motor30 kW MaterialMild steel, Stainless steel With jacketcheck General TypeMGT 600 G-1 MZ Mach.No.7965 Year of construction1976 Floorspace1,9x1,2 m Total height1,7 m Weight3200 kg Extra SpecificationsControl cabinet, 220-380 volt,&:nbsp:Paints & coatingsUniversal mixersPowdered foodsGeneric medicinesCatalysts & fillersDetergent & surf.CosmeticsFood additivesLubricants & oleoConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicLoedigeIndustries > Chemical > Paints & coatingsMixers > Universal mixer ...

General SKU264S274 LocationBarneveld CEcheck MakeBrabender Technologie KG (D) Main Features MaterialStainless steel Motor1.5 KW Inlet diameter300 mm Specified Features - Metering screw Screw diameter150mm With hoppercheck Hopper sizes1100x900x1300mm Inletdia. 300mm (1x), dia. 200mm (1x), dia. 75mm (1x) Outletdia. 200mm With motor1,5 kW 230/400 Volt Hopper with flexible wallcheck Metering screws MaterialStainless steel General TypeDDW-H34-FW155-600 No.00008158111 / 008012 Year of construction2000 Mounted on framecheck With switchgear(as is) Floorspace1,8x1,1 M Total height2,3 M Weight400 KgOils & fatMetering screwsPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmetic ...

General SKU413X1250 MakeCelsius TypeCWR-600 No.600456A Year of construction2010 overhauled 2014 Mounted on framecheck Pressure Working pressure5 Bar Working pressure jacket5 Bar Technical specs Max. temperature80 °C Main Features MaterialStainless steel Motor11 KW Specified Features - Continuous dryer Screw dryer(screw heat exchanger) Double shaftcheck Continuous(with product change) Capacity900 kg/h Length6000 mm Product inlet400 x 400 mm Manhole300 x 400 mm Product outlet320 x 860 mm With jacket25 l. Max. temperature0 / 80 °C (Glycol) Motor11 kW, 400/690 V, 1500 rpm Screw speed5,8 rpm With jacketcheck Continuous dryers MaterialStainless steel 1.4301 (304) General LocationBarneveld With switchcheck Floorspace8,70 x 1,90 m Total height1,50 m Weight5200 kg CEcheck Extra Specificationsdensity 1300 kg/m3, Internal volume screw 2x 180 l.Continuous dry ...

Transnorm conveyor belt GF 820-600-500 RA2471 Technical data: Conveyor length (NL): 820 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 820 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 scope of delivery: w ...

Transnorm conveyor belt GF 1200-600-500 RA2432 Technical data: Conveyor length (NL): 1200 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.53 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 Conveyor speed m / s: 0,53 scope of delivery: without supports an ...

Transnorm conveyor belt GF 1060-600-500 RA2472 Technical data: Conveyor length (NL): 1060 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1060 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m  ...

working area: 500x300 mm work height max.: 100 mm Weight: 120 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

B&A REF: 9269 TON: 60 SCREW DIAMETER: 25MM SHOT WEIGHT: 45 STROKE VOLUME: 49CM3 INJECTION PRESSURE: 2240AR PLATEN SIZES: 446 X 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT: 200MM MOULD OPENING STROKE: 350MM MAX DAYLIGHT: 550MM EJECTOR STROKE: 125MM AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 4.9KW SCREW DRIVE: HYDRAULIC

FCS SD-600 M injection moulding machine was built in 2009 in Taiwan by FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD. The machine, distinguished by its high efficiency and reliability, is an excellent choice for the economic production of plastic parts. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. A precision mould clamping system operating at a maximum force of 600 tonnes guarantees the high repeatability and quality of the parts produced. In order to fully automate the entire process, a robot works together with the machine. It collects the finished moulded parts from the workspace onto a conveyor belt at the end of the process. The FCS SD 600 M injection moulding machine weighs 24 tonnes. Technical specifications of the FCS SD-600 M injection moulding machine  ...

FCS SD-600MSV injection moulding machine was built in 2015 in Taiwan by FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD. The machine is designed for the economic production of plastic parts of various shapes, sizes and colours. These parts are produced by a reliable injection moulding method. It involves feeding plasticised plastic into a mould and then clamping it with high press force. A precision mould clamping system operating at a maximum force of 600 tonnes guarantees high repeatability and quality of the parts produced. The offer also includes equipment, consisting of, among others, an APEX robot and a conveyor belt. The FCS SD 600 MSV injection moulding machine weighs 40 tonnes. Technical specifications of the FCS SD-600MSV injection moulding machine - control system: FCS-3000 - maximum clamping force: 600 t - mould clamping stroke: 900 mm - screw diameter: 95 mm - injection  ...

FCS SD-600MSV injection moulding machine was built in 2016 in Taiwan by FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD. Technical specifications of the FCS SD-600MSV injection moulding machine - control system: FCS-3000 - maximum clamping force: 600 t - mould clamping stroke: 900 mm - screw diameter: 110 mm - injection volume: 4274 cm3 - maximum injection weight PS: 3890 g - maximum injection pressure: 1307 kgf/cm2 - injection rate: 899 cm3/s - injection speed: 95 mm/s - injection stroke: 450 mm - minimum mould dimensions: 560 x 560 mm - mould thickness: 300-1100 mm - mould mounting platen dimensions: 1290 x 1290 mm - distance between tie-bars: 860 x 860 mm - ejector stroke: 220 mm - ejector force: 11 t - robot: SHINI ST1 - conveyor belt - cooling device (chiller): RIOU RO-30A - temperature controller in the range 0-400°C (8 pcs.) - heating power: 47.2 kW - pump po ...

Standard equipment: machine - Coordinate guidance for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamping claws - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for closing the claws - Ball tables - 2 parts flaps 500 mm x 500 mm - FocusLine - Nitro Line - FastLine - Express cylinder laser parts - Cinder cone detection TRUMP Lasers - Solid-state laser TruDisk 3001 with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - Laser control TruControl 1000 - Cooling unit - Laser logbook function cutting head - Solid state laser compact cutting unit - Control Line punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / r ...

General SKU294M411 LocationBarneveld MakeCollette Machine TypeGRAL 600 Main Features MaterialStainless steel Volume600 Ltr. Motor37 KW Specified Features - Universal mixer Universal mixercheck Gral-granulatorcheck Capacity600 Ltr. Vessel sizesdia. 1080mm x 700mm Pneumatic operated outletcheck Outletdia. 250mm With motor37 KW, 380/660 Volt With lump breakercheck With motor7,5 / 5 KW, 380 Volt MaterialStainless steel With jacketcheck General Year of construction1984 With switchgearcheck Total height3,0 M Weight4200 KGPaints & coatingsUniversal mixersPowdered foodsGeneric medicinesCatalysts & fillersDetergent & surf.CosmeticsFood additivesLubricants & oleoConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicColletteIndustries > Chemical > Paints & coatingsMixers > Universal mixersIndustries > Food & Feed > Powdered foodsIndus ...

GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface900 x 560 mmDimensions (L x W x H)3,03 x 3,49 x 2,94 (5,8 x 5,5 x2,94) mMovement X / Y / Z600/560/510 mmRapid feed X / Y / Z30/30/30 m/minSpindle taperSK 40 DIN 69871 Tool Magazine with60 PositionsMax. torque82 NmTorque (100% DC)54 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmMaximum load (table centre)600 KgWeight approx.5300 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hProduction Package 40 barProduction Package 40 bar Optio ...

This 4-axis Mazak NEXUS HCN 6000 was manufactured in 2006. It features a Mazatrol 640M Nexus control, 800 mm travel in X, Y, and Z axes, and a B-axis rotation of 360°. The spindle speed reaches up to 10,000 rpm, and it includes a 120-position tool magazine. The table can handle loads up to 1,000 Kg. Consider the opportunity to buy this Mazak NEXUS HCN 6000 turn-mill centre. Contact us for more information.

General SKU306M436 MakeKusters Venlo No.60193/7 Year of construction2006 Mounted on legscheck Specified Features - Shredder Shreddercheck Double shaftcheck With hoppercheck Inlet600x400x240mm Outlet150x150mm Motor0,25kW, 230/400Volt, 1380rpm MaterialMild steel, Stainless steel 1.4301 (304) With jacketcheck General LocationBarneveld With switchgearcheck Floorspace1,5 x 0,9m Total height2,1m Weight600kg Extra Specificationsblades are made of mild steelShreddersKusters VenloBreakers > ShreddersBrand > Kusters Venlo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 3-axis MIKRON VCP 600 vertical machining center was manufactured in 2001. It features a 30-position tool changer, although only 21 positions are currently usable. The high-speed spindle operates at 8,000 rpm due to a slight imbalance. Consider the opportunity to buy this MIKRON VCP 600 vertical machining center. Contact us for more information.

General SKUR1307 MakeHeine Zentrifugen GmbH LocationBarneveld Type606 :continue push centrifuge: Main Features MaterialStainless steel Motor15 KW Specified Features - Pusher centrifuge Pusher centrifugecheck Basket diameter600 mm Basket width300 mm Wall thickness8,5mm Max. loading weight20 Kg Motor15 kW (400 V, (Ex)) Max. basket speed1250 rpm Hydraulic operated pushercheck With hydraulic unitcheck Motor7,5 kW (400 V) Solids outlet+/- 800 x 250 mm Liquid outlet(2x) 205 x 250 mm MaterialStainless steel 1.4571 (316Ti) General No.110020 Year of construction1988 Mounted on framecheck With switchcheck Floorspace2,7 x 1,7 m Total height1,4 m Weight3350 Kg ATEX designedcheck Extra Specificationslid including inlet is missingPowdered foodsGeneric medicinesStarchBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesCosmeticsE-waste & metalSugarSolid pharmaceuti ...

This 3-axis CDM Rovella BF 600 die-sinking EDM machine was manufactured in 1997. It features a 1400x700 mm working area and comes with equipment included. If you are looking to get high-quality die-sinking capabilities, consider the CDM Rovella BF 600 machine we have for sale. Contact us for more information about this machine.

General SKUR0814 MakeKuehni (CH) LocationBarneveld Pressure Working pressure2 Bar Main Features Capacity942 Ltr./Hr. Specified Features - Distillation Distillation installationvertical Capacity2120 Ltr. Column sizesdia. 600x7500mm Number of columns:1 Max. temperature200 degr. C MaterialStainless steel 1.4435 (316L) General No.226145 Year of construction1989 Floorspace1.3x1.3 M Total height8.0 M Weight1400 KgOils & fatDistillationFine chemicalsOther chemicalSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoBeveragesAPIKuehniIndustries > Food & Feed > Oils & fatColumns > DistillationIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > SolventsIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > Lubricants & oleoIndustries > Food & Feed > BeveragesIndus ...

This KEYENCE IM-6025 optical measurement machine was manufactured in 2016. It features a comprehensive set of components including a measuring head, control unit, glass plates, software, clamping device, glass scale, barcode scanner, lighting, and styli. Consider the opportunity to buy this KEYENCE IM-6025 optical measurement machine. Contact us for more information about this machine.

General SKUR1306 MakeHeine Zentrifugen GmbH LocationBarneveld Type606 :continue push centrifuge: Main Features MaterialStainless steel Motor15 KW Inlet diameter50 mm Specified Features - Pusher centrifuge Basket sizes600x300mm (cilindrical part) Wall thickness8,0mm Max. loading weight20 Kg Motor15 kW 380 Volt (Ex) Max. basket speed1250 rpm With hydraulic unitcheck Motor7,5 kW 380-420/660-690 Volt Inletdia. 50mm Solids outlet+/- 800x250mm Liquid outlet(2x)205x250mm Pusher centrifuges Pusher centrifugecheck Basket diameter600mm Basket width300mm Wall thickness8mm Max. loading weight20 Kg Motor15 kW Max. basket speed1250 rpm With hydraulic unitcheck Motor7,5 kW 380-420/660-690 Volt Inletdia. 50mm Solids outlet+/- 800x250mm Liquid outlet(2x)205x250mm MaterialStainless steel 1.4571 (316Ti) General No.99705 Year of construction1974 Mounted on framecheck W ...

Horizontal BAZ DECKEL MAHO DMC 60 H Linear with 2-fold pallet changer and 180 magazine locations Year of Make: 2009 Control: Sinumerik 840D Technical data: Spindle speed: 0-18,000 min-1 Drive power: 35KW Torque: Spindle mount: HSK 63 Number of magazine slots: 180 pieces Number of pallets: 2 Pallet size: 500x500mm Travels: X-axis: 630mm Y-axis: 800mm Z-axis: 650mm C-axis: 0.001° All axes have linear actuators Accessories: -Coolant system -Chip conveyor Machine was regularly serviced Video available on request.

Key data: 620 mm, 800 mm, 650 mm

Horizontal BAZ LID MAHO DMC 60H Linear with 2-fold pallet changer and 180 magazine locations Year of Make: 2009 Control: Sinumerik 840D Technical data: Spindle speed: 0-18,000 min-1 Drive power: 35KW Torque: Spindle mount: HSK 63 Number of magazine slots: 180 pieces Number of pallets: 2 Pallet size: 500x500mm Travels: X-axis: 630mm Y-axis: 800mm Z-axis: 650mm C-axis: 0.001° All axes have linear actuators Accessories: -Coolant system -Chip conveyor Machine was regularly serviced Video available on request.

General SKU212T092 MakeKuehni LocationBarneveld CEcheck TypeEMS 600/9 - ECR 600/4 Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume2390 Ltr. Motor1.5 KW Specified Features - Extraction Extractorcheck Capacity2390 Ltr. Diameter600 mm Length3450 mm Max. temperature100 °C With rotorGetriebebau (Ex) Motor1,5 kW 220-240/380-415 Volt (EX) Rotor speed78 rpm MaterialStainless steel 1.4571 (316Ti) General No.2776 Year of construction2009 Floorspace0,9x0,9 m Total height4,6 m Weight600 kg ATEX designedcheck Extra Specificationsmechanical sealOils & fatFine chemicalsBiotechnologyAgrochemicalsFeed additivesCosmeticsFood additivesLubricants & oleoAnimal feedOther feedBiopharmaceuticalExtractionKuehniIndustries > Food & Feed > Oils & fatIndustries > Chemical > Fine chemicalsIndustries > Chemical > BiotechnologyIndustries  ...

General SKU306M440 MakeKusters Venlo No.60193/4 Year of construction2006 Mounted on legscheck Specified Features - Shredder Shreddercheck Double shaftcheck With hoppercheck Inlet600x400x240mm Motor0,25kW, 230/400Volt, 1380rpm MaterialMild steel, Stainless steel 1.4301 (304) General LocationBarneveld With switchgearcheck Floorspace1,5 x 0,9m Total height2,1m Weight600kg Extra Specificationsblades are made of mild steelConsumer wasteRubberPlastic & polymersShreddersCatalysts & fillersOrganicsPaper & otherE-waste & metalPlastic & rubberMinerals & inorganicKusters VenloIndustries > Recycling > Consumer wasteIndustries > Chemical > RubberIndustries > Chemical > Plastic & polymersBreakers > ShreddersIndustries > Chemical > Catalysts & fillersIndustries > Recycling > OrganicsIndustries > Recycling > Paper & otherIndustries > Recycling > E-waste & metalIndustries > Recycling  ...

Milling machine Röders RFM 600 BJ 2000

A single-shaft shredder Erdwich for contaminant-free red brass and brass chips is available. Cutting unit dimensions X/Y: 600mm/500mm, height: 300mm, knife width: 25mm, screen hole diameter range: 25mm-35mm, machine dimensions X/Y/Z: approx. 1600mm/650mm/800mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

The hydraulic automatic tilting kettle with a capacity of 600 liters is designed for professional use in the food processing industry. The hydraulic tilting system ensures easy and safe emptying of the contents. The double jacket with thermal oil provides even heat distribution and precise temperature control, making it suitable for cooking, mixing, and thermal processing of soups, sauces, jams, creams, and ready meals. Manufactured from high-quality stainless steel, it ensures durability, hygiene, and long service life. Technical specifications: Hydraulic automatic tilting kettle Manufacturer: Sind With cover Double jacket- thermal oil Volume: 600 liters Power: 30.7kW Made out of stainless steel Machine dimensions in cm: Length: 205 Width: 158 Height: 123

Quality scanner manufactured in 2014. This MICROTEC GOLDENEYE GLD 600 DSC is designed for the inspection of large boards and panels up to 1.8 meters in width. It integrates geometric, visual, and X-ray multi-sensor cameras to assess both external and internal properties of lumber, providing a comprehensive evaluation of material quality. If you are looking to get high-quality inspection capabilities, consider the MICROTEC GOLDENEYE GLD 600 DSC machine we have for sale. Contact us for further details.

The machine is in good technical condition, after prior agreement it is possible to test it. Workpiece weight (max.): 1,000 kg X-axis travel distance: 600 mm Y-axis stroke: 400 mm Z-axis stroke: 310 mm Wire diameter (max.): 0.3 mm Workpiece height (max.): 310 mm Width (max.): 1,050 mm X-axis feed: 600 m/min Y-axis feed speed: 1,000 m/min Table load: 1,000 kg Equipment: refrigerator, compressor

This 3-axis TRUMPF Trumatic 600L was manufactured in 1996. It features a maximum punching force of 220 kN and a laser power of 1,500 W, making it suitable for various applications. With a machine weight of 18,000 kg, it offers robust performance. If you are looking to get high-quality punching and laser capabilities, consider the TRUMPF Trumatic 600L punch-laser combination we have for sale. Contact us for further details.

EXERON DIGMA HSC 600 milling center was built in 2010 in Germany by Exeron GmbH. It is an extremely versatile yet compact machine designed for the production of precision tools and moulds. A number of state-of-the-art technical solutions, combined with extensive equipment, guarantee excellent repeatability of the manufactured parts over many years of intensive operation. The EXERON DIGMA HSC 600 is distinguished by its extremely rigid gantry structure, made of polymer concrete. The entire workspace has been fully maximised to ensure maximum freedom of operation. It features all the necessary equipment, i.e. a reliable electro-spindle, a 30-position tool magazine and a large work table with a length of 900 mm and a width of 550 mm. The machining process is performed fully automatically in HSM (High Speed Cutting) technology. This technology allows a significant reduction in cycle ti ...

This 3-axis DAEWOO ACE V 600 was manufactured in 1997. It features an impressive X-axis travel of 1,260 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine includes a robust table size of 1,400 x 700 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the DAEWOO ACE V 600 vertical machining centre we have for sale. Contact us for further details.

TECO Office 600 All FUll time surge protection

A welding turning device Jucat, consisting of two parts with the workpiece in the middle, is available. Design: 2-column system, max. load capacity: 6000kg, rotation torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. rotational speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible.

A welding turning device Jucat consisting of two parts with the workpiece in the middle is available. Design: 2-column system, max. load capacity: 6000kg, rotational torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible.

grinding diameter: 850 mm grinding length: 6000 mm centre height: 425 mm grinding wheel size: 750 x 100 x 305 mm table - swivable: -2 / +2 Grad table load capacity: 3000 kg chucking diameter: 315 mm grinding head swivelling: 90 Grad spindle taper MT: 6 spindle speeds: 12 -300 mm grinding head - power requirement: 22 kW Control: Siemens 840D grinding wheel head adjustable: +30 / -10 ° total power requirement: 41 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 16,0 x 4 x 2,1 m - Siemens Sinumerik 840D CNC control - SBS balance system - INTERNAL GRINDING DEVICE - 4 support steady rests - Tailstock - Coolant system - Electronic hand-held control panel - Ball screws X-Z - Pneumatic quill stroke - Paper belt filter device - Oil mist extraction device - Full protective cover The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.