136,415 used machines on RESALE, but how to find them? Machine Search
Heber conveyor belt GF 34500-600-500 RA2241 Technical data: Conveyor length (NL): 34500 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, RF63DT90L4 Electrical data: 50Hz V380-500, kW 1,5 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 34500 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralan ...
Dematic roller curve right 90°-600-540 IR830 RA2351 Make: Dematic Direction of rotation: 90° clockwise Insertion width/roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 830 mm, 900 mm to plastic coating Height frame: 140 mm Height including motor: 240 mm Electrical data: 3x 300-500V Gear motor: SEW Conveyor speed: 0.7 m/s Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1987 Drive type: Round belt condition: good (used) Nominal / inner radius in mm: 830 Nominal / outside width in mm: 600 Roll width in mm: 540/450 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or ...
Dematic roller curve left 90°-600-540 IR830 RA2351 Make: Dematic Direction of rotation: 90° counter-clockwise Insertion width/roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 830 mm, 900 mm to plastic coating Height frame: 140 mm Height including motor: 240 mm Electrical data: 3x 300-500V Gear motor: SEW Conveyor speed: 0.7 m/s Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1987 Drive type: Round belt condition: good (used) Nominal / inner radius in mm: 830 Nominal / outside width in mm: 600 Roll width in mm: 540/450 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by p ...
Built in 1990 Stacking lift Tub photoelectron. Stack Scanning Delivery date: immediately Price on request. We supply and install worldwide.
used
1. Qty. 1 Second-hand slab gas fired pit type furnace Manufacturer: Tehnika Set Type: Gas heated (2 Zones) Built: 2001 Stopped: 2019 Power: 110kW Number of heating units: 8 Dim.: 2622 5084 x 6294 mm – H x W x L Inner dimension per zone: LxWxH – 380026001635 mm Load weight max. / 2 zones: 42.000 kg Max. Slab number per zone: 5 Slab length: 3000 mm Voltage supply: 380 V, 50 Hz Compressed air: 5 bar Max. Temp.: 630 °C
Transnorm spiral helix belt curve conveyor left 90°-825-600 IR600 RA2401 Technical data: Type designation: belt curve conveyor TS 1600-105 Helix frame width (NB): 825 mm belt width (GuB): 600 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 260 mm rising) Incline: 260 mm / 90° = 1040 mm / 360° Support feet: optionally available Conveying speed (v m/s): 0.4 Drive: SEW gearmotor Electrical data: 50Hz V380-500, kW 0.55 / S1 Belt: double layer, green, smooth, KT106 (wear see pictures) year of construction: 2006 Optionally available: Supports Side guide one and both sides frequenzy converter for steples speedcontroll Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) scope of delivery: including Movimot frequency converter, without supports and side guides Driven: YES N ...
OKUMA MA-600HII CNC machining center was built in 2012 by the Japanese brand OKUMA Corporation. This highly efficient machine is used for advanced workpiece machining in 4 axes. The machining process is performed fully automatically inside a large working area by means of precision cutting tools and a reliable high-speed spindle. The automatic pallet changing system allows workpieces to be loaded and unloaded simultaneously during machining, reducing machine downtime to a minimum. The extensive equipment also includes, among others, a capacious tool magazine and an intelligent CNC controller with an intuitive interface. The MA-600HII CNC horizontal machining center weighs 24500 kg. Technical specifications of the OKUMA MA-600HII CNC milling machine - CNC controller: OSP-P300MA - number of axes: 4 (X,Y,Z,B) - feed in the X/Y/Z axis: 1000/900/1000 mm - rapid traverse in the X,Y,Z ax ...
Size: 600 mm Equipments: PSV 600 - Pressing unit with vertical stacker basics: plc-controlled - automatic shingle control - multiple counters better informations by plc-display - easier setting - more efficiency Stronger pressing unit - batch counter - 2-up-equipment
Kannegiesser belt conveyor belt conveyor GF 1250-680-600 RA1816 Kannegiesser conveyor belt is from 2020 and is in mint (used) condition. The belt conveyor has a motor drive from Bauer with frequency converter to regulate the conveyor speed. The pictured supports are included in the delivery. Technical data: Conveyor length (NL): 1250 mm Frame width (NB): approx. 680 mm Belt width (GuB): 600 mm Overall height(BH): 800 - 1130 mm ascending Number of support feet: 2 pieces Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: Bauer gear motor Electrical data: 400 V / 50 Hz / 0,37 kW deflection drum (UT): Ø = 60 mm belt return roller: Ø = 50 mm Belt: 2-ply PVC belt, grey, smooth Year of manufacture: 07/2020 Special feature / accessories: 1x Bauer gear emtor with frequency converter 2x return pulley cover Optionally available: Side guides one and both sides All p ...
A laser cutting and punching machine Trumpf with an unknown defect (linear amplifier in order) is available. Press force: 220kN, laser power: 1500W (1.5kW), max. punching diameter: 76mm, max. workpiece dimensions X/Y: 2585mm/1280mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 200kg, part dispenser X/Y: 500mm/500mm, magazine positions: 18, machine dimensions X/Y/Z: approx. 8000mm/7500mm/2400mm, weight: approx. 16000kg. On-site inspection is possible.
Vibrating sieve RUSSELL, Type AC600, Sold without seals and without screen, ATEX: internal II, 2D, T100C / external II 3D, T120C, Dimensions (mm): 700x920 H 1085, Sieve diameter (mm): 510, Engine: italvibras g.silingardi , Engine power: 0,25kW , ATEX: Yes (ATEX II 2 D )
x-travel: 400 mm y-travel: 330 mm z-travel: 350 mm total power requirement: 6,3 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 736 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 600 mm Free lateral opening F-B: 190 mm Table surface area : 600 x 500 mm Slide area: 600 x 400 mm Hole in table: 500 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 1100 mm Required power: 32 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 6,2 ton
grinding height: 60 mm grinding width: 120 mm grinding wheel diameter: 600 mm grinding length: mm workpiece height: 60 mm total power requirement: 50 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 ______________________________________________________________________ ________ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 1 ...
workpiece diameter: 30 mm workpiece diameter: 30 mm threading length: 110 mm threading length: 110 mm thread pitch: 0,5-2,75 mm/GG thread pitch: 0,5-2,75 mm/GG total power requirement: 4,5 kW total power requirement: 4,5 kW weight of the machine ca.: 1,7 t weight of the machine ca.: 1,7 t dimensions of the machine ca.: m dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Roller conveyor length: 6000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 160 kg length in width: 620 mm length in total: 6000 mm Roller conveyors without stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 1900 mm width: 810 mm height: 860 mm internal dimension: 1,5 x 0,74 x 0,78 Contents: 600 l The containers are chip bins ! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 600 Kg Magnetic field: 228 x 122 mm weight: 0,022 t dimensions: 0,23 x 0,122 x 0,112 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 1900 mm width: 810 mm height: 860 mm internal dimension: 1,5 x 0,74 x 0,78 Contents: 600 l The containers are chip bins ! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
measuring length: bis 5700 mm Tube length: 6000 mm numbers of toolholders: 7 : Rohr Edelstahl dimensions: 6,0 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 600 mm table width: 240 mm x-travel: 370 mm y-travel: 130 mm table height: 165 mm weight: 60 kg dimensions: 0,8 x 0,45 x 0,2 mm Cross table with turntable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
BREADING MACHINE, KOPPENS TYPE: PR 600 Technical description: Machine number: PR600-972 Power supply: 380-440 V/50-60 Hz Power: 1.7 kW Weight: 300 Kg Stainless steel mesh belt Belt widht: 600 mm Dimensions: 2200 x 800 x 1900 mm
impact length: 6000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 195 kg length in width: 620 mm length in total: 6400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 800 mm grinding width: 600 mm grinding height: 500 mm weight of the machine ca.: 4.9 t dimensions of the machine ca.: 3.20 x 2.90 x 2.55 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
4-SHAFT SHREDDER 22 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 11 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.
4-SHAFT SHREDDER 15 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 7,5 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.
Control: Manufacture: SIEMENS 840D x-travel: 600 mm y-travel: 560 mm z-travel: 510 mm table-size: 900 x 560 mm spindle turning speed range: 12000 U/min tool magazin:: 30 weight of the machine ca.: 5 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 750 mm table width: 300 mm x-travel: 500 mm weight of the machine ca.: 0.160 t UNUSED CONDITION The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 6000 mm y-travel: 1000 mm z-travel: 1200 mm table-size: 6400x1000 mm tool change unit: 80x spindle taper: HSK A100 spindle turning speed range: 45-9000 U/min total power requirement: kW weight of the machine ca.: 48 t dimensions of the machine ca.: 12x4.3x4.5 m SIEMENS 840D 4th axis B-Axis +/-90° Spindle coolant through spindle Tool measuring device www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Continuous ploughshare mixer, used Type : KM 600 DW Brand: Lödige Material : Areas in contact with the product in stainless steel Volume : 600 ltr. --> 2 x Knife Head
600 m pallet rack STOW, as good as new Features • Colour: Galvanised frame / yellow beam •Ultimate load: o Bay load: 12,000 kg o Shelf load: 2,400 kg per level/evenly distributed load + 216 frames, height approx. 5500 mm, depth 1100 mm + 1290 pcs. Beam 2700 mm length, 2400 kg load/with evenly distributed load + 2580 Hook-in Safety Devices + 864 concrete anchors M12 x 110 mm for fastening Price / 48.100,- € net excl. VAT Matching insert wire mesh available on request • Other heights and quantities on request • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Viewing and pick-up: possible at any time by appointment Over 5000 linear metres of pallet racks from numerous manufacturers in stock at all times (Changes and errors in the technical data, specifications and prices as we ...
An all-terrain four-way sideloader Combilift is available. Fuel: LPG, load capacity: 6000kg, load center: 600mm, lift height: 5552mm, mast type: Triplex, overall height: 2845mm, free lift: 1600mm, fork: 1400mm, valves: 3, weight: approx. 9800kg, operating hours: 561h. Including fork positioner, heating, full cab and double gas bottle holder. Documentation available. On-site inspection is possible.
roll diameter: 600 mm roll length: 1800 mm rolls drilled: Flaschenhals Nip adjustment: hydraulisch 0 total power requirement: 132 kW Condition: used, completely overhauled, with warranty Specification: Rolling mill 600 x 1800 mm - used monobloc model - motor under the rolls - roller diameter: 600 mm - roll length: 1800 mm - Roller core with central chamber for water cooling - Fixed friction between the rolls - hydr. gap adjustment: new - hydraulic unit: new - Tiltable steel guide plates - Rollers on bronze bearing bushes with oil circulation lubrication via pump - Rollers with new ball bearing slewing rings, make Maier, for connection to the water circuit to the water circuit - AC main motor: 132 kW - 400 V - 50 Hz - two Safety brake for EMERGENCY STOP - Roller tank made of stainless steel to hold the mixture - Bi-directional safety bars - V ...
Complete vertical packaging system for dosing coffee beans AND ground coffee and packaging in coffee stand-up pouches with aroma valve. The system is equipped with two separate dosing systems (auger filler for powder, volumetric cup dosing unit for granules) and also has a Z-conveyor, screw conveyor, outfeed conveyor and an AMTEC PRO P60XL as VFFS packaging machine. A hot stamping printer for date, batch number (optional: thermal transfer printer on request), an anti-static module, stand-up pouch module (gusset device) and flat-bottom module (bottom seam is applied tightly to bottom, depending on the film material) are also part of the equipment. - Specifications VFFS: Stable film pulling by vacuum | MITSUBISHI/SIEMENS PLC, WEINVIEW touch screen operator interface | mark sensor registration control | quick change former assembly, pneumatic sealing unit | servo motor film pulling | bag si ...
Complete vertical packaging system for dosing coffee beans AND ground coffee and packaging in coffee stand-up pouches with aroma valve. The system is equipped with two separate dosing systems (auger filler for powder, volumetric cup dosing unit for granules) and also has a Z-conveyor, screw conveyor, outfeed conveyor and an AMTEC PRO P60L as VFFS packaging machine. A hot stamping printer for date, batch number (optional: thermal transfer printer on request), an anti-static module, stand-up pouch module (gusset device) and flat-bottom module (bottom seam is applied tightly to bottom, depending on the film material) are also part of the equipment. - Specifications VFFS: Stable film pulling by vacuum | MITSUBISHI/SIEMENS PLC, WEINVIEW touch screen operator interface | mark sensor registration control | quick change former assembly, pneumatic sealing unit | servo motor film pulling | bag siz ...
Vertical packaging machine with piston pump for dosing liquids. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm | suitable film width: 240mm | suitable film: composite film, heat sealable | dosing range: 1-50ml | max. speed of the machine in neutral: 60 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L900xW700xH1850mm | weight: 250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packa ...
Vertical packaging machine with auger dosing unit for powders. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm | suitable film width: 240mm | suitable film: composite film, heat sealable | dosing range: 1-50g | max. speed of the machine in neutral: 60 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L800xW960xH2050mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packagi ...
Vertical packaging machine with volumetric cup filler for granules. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm | suitable film width: 240mm | suitable film: composite film, heat sealable | dosing range: 1-50g | max. speed of the machine in neutral: 60 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L800xW960xH1900mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your pa ...
Vertical packaging machine including dosing system(s) with 10 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1% | max. speed of the machine in neutral: 10x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-38)mm | power: 220V, 6.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1800xW1500xH1900mm | weight: 750kg. That machine/system is available in different versions for different packaging sizes and with different packaging ...
Vertical packaging machine including dosing system(s) with 10 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 10x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-38)mm | power: 220V, 6.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1800xW1500xH1900mm | weight: 750kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that ou ...
Vertical packaging machine including dosing system(s) with 10 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 10x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-38)mm | power: 220V, 6.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1800xW1500xH1900mm | weight: 750kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that ...
Automatic Sleeve Labelling Machine with a capacity of up to 100 cycles per minute. Shrink tunnel included. Stainless steel version (SS304), servo motor driven cutter, no-bottle-no-label, label feeding device with a feeding speed of up to 90m/min for fast and precise production. Brusher devices to help fixing the label in the right position, bottle position fixing device, adjustment to lift he machine according to the bottle size. MITSUBISHI PLC, WEINVIEW touchscreen. - Specifications: max. speed of the machine in neutral: 100 cycles/minute | label ?: 28-50 or 50-95 or 95-125mm | label length: 35-300mm | label thickness: 0.035-0.08mm | power: 2kW, machine dimensions: L6000xW1050xH2100mm | weight: 1200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available im ...
Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml | volume of hopper: 30L | number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 200-600kg/h (with max. 5m conveying distance) |housing: stainless steel 304 | required compressed air: 0.6 MPa | air consumption: approx. 15L/min | power supply: 220V | power consumption: 2.2kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
X-ray inspection system designed for large trays, boxes, large bags. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 600 mm | detection accuracy: Pb from ? 0.2 mm, Fe from ? 0.28 mm, SUS from ? 0.28 mm, non-metallic such as stone, glass, from ? 1.2 mm | X-ray output: 150 kVp, 7.5 mA | X-ray detector resolution: 0.4 mm | X-ray emissions: < 1usv/h | X-ray beam: horizontal scan | conveyor belt height: 750 ? 30 mm | conveyor speed (dependent on product dimensions): 10 ? 60 m/min | screen: 15 touch screen | software: intellisens?X-ray | operating temperature: 5 ? 35 ?C | reject system: optionally available according to requirements | power: 220VAC, 50/60Hz | dimensions of the system: L1800xW1300xH1900 mm | weight: 580 kg. Please note that our new prices are often below the usual used prices. Pl ...
Brand Name: GOPEL Model: OPTICON THT 600 LINE Year: 2015 Serial Number: TH-603 Notes: - The machine is in excellent condition and in working order. - No CE manuals and declaration of conformity have been provided. - The goods being sold are declared out of service and with the obligation to restore safety in the devices relating to Legislative Decree 81/08 on machine safety. - PROPERTY INTENDED FOR VAT HOLDERS.
Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 130 x 50 mm Truss Type: PNB0443|1.5 Agraffe: 4 HK (hooks) Clear width: approx. 3,600 mm Max. load per pair of trusses 2,417 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
For sale is a good used Keyence digital measurement projector of the type IM-6025. The measuring device is sold including the IM-7500 control unit. Prior sale and errors excepted.
Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 120 x 50 mm Truss Type: PNB0442 Agraffe: 4 HK (hooks) Clear width: approx. 3,600 mm Max. load per pair of trusses 2,058 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Note: Some of the trusses have 5-6 drill holes on the sides. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery loc ...
maximum number of results exceeded
please refine your search
