5000 ton used for sale

Key data: 3000 kN

Bed Size: Left to Right 785mm 30 1⁄2 in Front to Back 890mm 35 in Daylight Between Tables 1206mm 47 1⁄2 in Daylight Between Heated Platens 841mm 33 1⁄8 in Heated Platen Sizes(Up To) 760mm x 610mm 28″x24″ Max Working Platen Temperature 220°C 428F Main Ram Stroke(Up To) 610mm 24 in Hydraulic Circuit Pressure 210 Bar 3000 PSI Main Ram Pressing Force 305 T 300 Ton Maximum Pummel Diameter 102mm 4 in Closing Speed(Up To) 150mm/s Opening Speed(Up To) 120mm/s

Hydraulic Press for Diamond Cutting Disc 60phi500phi Plate Furnace Medium Pressure Forming Machine Instruction Manual 1988.6.25 Kyodo Seiki Co., Ltd. Postal:211 518-4 Ogura, Saiwai-ku, Kawasaki-shi, Kanagawa, Japan TEL: 044(544)6925 FAX: 044-541-3546 1. Machine Specifications 1) Maximum Output: 60,000 kg 2) Max Output Pressure: 150 kg/cm² 3) Effective Stroke: 250 mm 4) Furnace Dimensions: - Horizontal Side: 8kw × 2 - Rear Side (With Door): 8kw 24kw 5) Heating Temperature: 860°C 6) Internal Dimensions: W650 mm × N 450 mm ×D 750 mm 7) Power Input: - Main Pump: 2.2 kW × 4 pole - Auxiliary Pump: 0.4 kW × 4 pole 8) Oil Tank Capacity: 120 L (ISO.VG32-56 equivalent hydraulic oil) 9) Temperature Control: Silister P.I.D Control 10) Vacuum: 4-stage 415V - 50Hz 2. Machine Installation 1) Install the press body on a flat surface. Secure it with anchor bolts if possi ...

Bespoke built Hydraulic press for the manufacture of airplane seat back Force: 100 ton Table size 2000mm x 2000mm Platens drilled for oil heating Run out table Omron PLC Cylinder in need for repair, oil heater not included

General SKU292T670 LocationBarneveld CEcheck MakeVan Tongeren kennemer BV Main Features Motor3 KW Length7000 mm Inlet diameter430 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter420 mm Length7000 mm Shaft diameter260 mm Pitch200 mm Inletdia. 430 mm Outletdia. 221 mm Max. temperature100 °C Motor3 kW 219-241/380-420 Volt (Ex) Height between in- and outlet5890 mm MaterialStainless steel 1.4301 (304), Stainless steel 1.4401 (316) With jacketcheck General TypeZ43430 Mach.No.T4404 Year of construction2015 Floorspace0,7x8,9 m Total height0,9 m ATEX designedcheckOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnologySpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergen ...

General SKU292T671 MakeVan Tongeren kennemer BV Mach.No.Z43721 / T4400 Year of construction2017 Main Features Motor1.1 KW Length5000 mm Inlet diameter175 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter380 mm Length5000 mm Between inlet and outlet4650 mm Shaft diameter160 mm Pitch245 mm Inletdia. 175 mm Outletdia. 180 mm Motor1,1 kW 219-241/380-420 Volt (Ex) With variable speed drive(Ex) Screw speed27 rpm. (34 895 l/h) MaterialStainless steel With jacketcheck General LocationBarneveld Floorspace6,5x0,7 m Total height0,7 m Weight700 kg CEcheck ATEX designedcheckOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnologySpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDe ...

General SKU292T672 LocationBarneveld CEcheck Main Features Motor1.1 KW Length1900 mm Inlet diameter175 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter360 mm Length1900 mm Shaft diameter170 mm Pitch255 mm Inletdia. 175 mm (2x) Outletdia. 140 mm Motor1,1 kW 219-241/380-420 Volt With coverscheck MaterialStainless steel With jacketcheck General MakeVan Tongeren kennemer Mach.No.Z43752 Year of construction2015 Floorspace3,2x0,55 m Total height0,6 mOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnologySpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther ...

9 assen: Y1 / Y2 / X1 / X2 / Z1 / Z2 / R1 / R2 / V Amada / Europees type gereedschap laserbeveiliging Capacity: 175 ton x 3700 mm Backgauge: CNC - 1000 mm Control: Delem DA-66T Passage between uprights: 3100 mm Max stroke: 265 mm Max distance between table -- ram: 530 mm Depth of throat: 410 mm Table width: 104 mm Locking speed: 140 mm/sec Working speed: 10 mm/sec Returning speed: 100 mm/sec Electric motor (power): 18,5 kW Length: 4950 mm Depth: 1700 mm Height: 2900 mm Weight: 11,5 ton Capacity: 175 ton Bending length: 3700 mm

8 assen: Y1 / Y2 / X / X#39; / R / Z1 / Z2 / V met Easy Form lasermeetsysteem met CNC-bombardement met Lazer Safe-bescherming met Willa hydraulische klemming boven en onder Turbo-versie Capacity: 220 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 400 mm Table width: 120 mm Locking speed: 120 mm/sec Working speed: 21 mm/sec Returning speed: 200 mm/sec Electric motor (power): 42 kW Length: 6320 mm Depth: 2850 mm Height: 3600 mm Weight: 20 ton Capacity: 220 ton Bending length: 4100 mm

CNC Lathe Tongtai Topper TNL - 100 TL / Fanuc OT -CE marking -Fanuc OT control -Max. turning diameter 388mm -Max. turning length 580mm -Rod passage 51mm -Hollow spindle diameter 62mm -Speed 45 - 4500 rpm -Turret / 12 stations -Tool -Eye / Tool Measurement -Tool shank 25mm - Holder diameter 32mm - Axis movement X/Z 200 & 600mm -Rapid traverse X/Z axis 20 & 24 m/min -Spindle motor 15 KW -Tailstock -Footswitch -Machine feet -Chip conveyor -Documentation Dimensions: LxWxH 2.6x1.8x2 meters / Weight 4700Kg

Tongtai / Topper TMV - 720 A / Fanuc OI-MD Vertical Machining Center -CE marking -Year of construction 2011 -Control Fanuc Oi-MD -Travel X / Y / Z 720x480x530mm -Distance spindle nose / table 100-630mm -Table size 800x480mm -Max. table load 500Kg -Spindle holder BT-40 -Spindle speed 8000 rpm -Spindle motor 7.5 / 5.5 KW -Rapid traverse X / Y / Z each 48 M/min -Feed speed 1-10000 MM/min -Tool changer / 24 compartment -Tool change time (T-T) 3 sec. -Max. tool weight 7Kg -Max. tool diameter 80mm -Work light -Coolant device -Chip conveyor -Electric handwheel Dimensions: LxWxH 2.8x2.2x2.8 meters / Weight 4400Kg

Type: SCM160 - set van 4 vijzels met elk een hefvermogen van 16 ton - Hefslag: 2000 mm -Snelheid omhoog/omlaag: 230 mm/min - 3 kW vermogen per aansluiting - totaal vermogen: 24 kW Elke krik is uitgerust met een absolute encoder voor het detecteren van de hoogte, rotatie en diagnose- en veiligheidssensoren om belasting, versleten moeren en obstakels onder het aambeeld te detecteren. Elektrisch systeem met standaard aansluiting en computergestuurde bedieningseenheid, gemonteerd op een verrijdbare trolley.

Table dimensions ( x-y/mm) 800 x 800 Stroke (mm) 170 Stroke per minute 32 Power of the ejector in the slide ( ton) 10 Stroke of the ejector in the slide (mm) 100

planetary mixer Find more here - / Contact us at -

Konecranes 5 ton x 30 000 mm Kind of: overhead travelling crane Capacity: 5 ton Span: 30 000 mm Radiocontrol: radio control Numbre of riggers : single rigger

Konecranes 5 ton x 30 000 mm Kind of: overhead travelling crane Capacity: 5 ton Span: 30 000 mm Radiocontrol: radio control Numbre of riggers : single rigger

Stahl takel SH 6050-25 4/1 L3 klasse FEM M5 (2M) Kind of: overhead travelling crane Capacity: 20 ton Span: 30 000 mm Motorpower: 30 kW Tackle speed: 1 & 6,3 m/min Rotationspeed: 5 & 20 m/min Displacementspeed: 10 & 40 m/min Weight: 22 ton Radiocontrol: radio control Numbre of riggers : double girder

Konecranes 10 ton x 28 470 mm Kind of: overhead travelling crane Capacity: 10 ton Span: 28 470 mm Motorpower: 17,7 kW Tackle speed: 1,3 & 8 m/min Rotationspeed: 1 > 20 m/min (frequency controlled) Displacementspeed: 1 > 63 m/min (frequency controlled) Weight: 16 ton Radiocontrol: radio control Numbre of riggers : double girder

CTX-type takel - twee vaste hefsnelheden - De beweging van de kraan en de takel zijn frequentie gestuurd. - klasse FEM M5 (2M) Kind of: overhead travelling crane Capacity: 10 ton Span: 28 470 mm Motorpower: 17,7 kW Tackle speed: 1,3 & 8 m/min Rotationspeed: 1 > 20 m/min (frequency controlled) Displacementspeed: 1 > 40 m/min (frequency controlled) Weight: 16 ton Radiocontrol: radio control Numbre of riggers : double girder

CTX-type takel - twee vaste hefsnelheden - De beweging van de kraan en van de takel zijn frequentie gestuurd. - klasse FEM M5 (2M) Kind of: overhead travelling crane Capacity: 10 ton Span: 28 470 mm Motorpower: 17,7 kW Tackle speed: 1,3 & 8 m/min Rotationspeed: 1 > 20 m/min (frequency controlled) Displacementspeed: 1 > 40 m/min (frequency controlled) Weight: 16 ton Radiocontrol: radio control Numbre of riggers : double girder

CTX-type takel - twee vaste hefsnelheden - De beweging van de kraan en de takel zijn frequentie gestuurd. - klasse FEM M5 (2M) Kind of: overhead travelling crane Capacity: 20 ton Span: 28 470 mm Motorpower: 22,4 kW Tackle speed: 1,1 & 6,3 m/min Rotationspeed: 1 > 20 m/min (frequency controlled) Displacementspeed: 1 > 40 m/min (frequency controlled) Weight: 18 ton Radiocontrol: radio control Numbre of riggers : double girder

CTX-type takel - twee vaste hefsnelheden - De beweging van de kraan en de takel zijn frequentie gestuurd. - klasse FEM M5 (2M) Kind of: overhead travelling crane Capacity: 20 ton Span: 28 470 mm Motorpower: 22,4 kW Tackle speed: 1,1 & 6,3 m/min Rotationspeed: 1 > 20 m/min (frequency controlled) Displacementspeed: 1 > 40 m/min (frequency controlled) Weight: 18 ton Radiocontrol: radio control Numbre of riggers : double girder

Semi-portaal bovenloopkraan - twee vaste hefsnelheden - De beweging van de kraan en van de takel zijn frequentie gestuurd. - dubbele drive bovenaan - geen rails nodig, de kraan beweegt over de vloer Kind of: semi-portal crane Capacity: 5 ton Span: 15030 mm Motorpower: 10,6 kW Tackle speed: 0,83 & 5 m/min Rotationspeed: 1 > 20 m/min (frequency controlled) Displacementspeed: 1 > 40 m/min (frequency controlled) Weight: 6210 kg Radiocontrol: radio control

Semi-portaal bovenloopkraan - twee vaste hefsnelheden - De beweging van de kraan en van de takel zijn frequentie gestuurd. - dubbele drive bovenaan - geen rails nodig, de kraan beweegt over de vloer. Kind of: semi-portal crane Capacity: 5 ton Span: 15030 mm Motorpower: 10,6 kW Tackle speed: 0,83 & 5 m/min Rotationspeed: 1 > 20 m/min (frequency controlled) Displacementspeed: 1 > 40 m/min (frequency controlled) Weight: 6210 kg Radiocontrol: radio control

Semi-portaal bovenloopkraan - twee vaste hefsnelheden - De beweging van de kraan en van de takel zijn frequentie gestuurd. - dubbele drive bovenaan - geen rails nodig, de kraan beweegt over de vloer. Kind of: semi-portal crane Capacity: 5 ton Span: 15030 mm Motorpower: 10,6 kW Tackle speed: 0,83 & 5 m/min Rotationspeed: 1 > 20 m/min (frequency controlled) Displacementspeed: 1 > 40 m/min (frequency controlled) Weight: 6210 kg Radiocontrol: radio control

Stahl 15 ton x 30 000 mm Kind of: overhead travelling crane Capacity: 15 ton Span: 30 000 mm Rotationspeed: 5 & 20 m/min Displacementspeed: 10 & 40 m/min Radiocontrol: radio control Numbre of riggers : double girder

Demag 10 ton x 30 000 mm Kind of: overhead travelling crane Capacity: 10 ton (1AM) Span: 30 000 mm Tackle speed: 6,3 m/min Rotationspeed: 5 & 20 m/min Displacementspeed: 10 & 40 m/min Radiocontrol: radio control Numbre of riggers : double girder

Stahl 10 ton x 30 000 mm Kind of: overhead travelling crane Capacity: 10 ton Span: 30 000 mm Rotationspeed: 5 & 20 m/min Displacementspeed: 10 & 40 m/min Radiocontrol: radio control Numbre of riggers : double girder

Takel type: EZDH 1032 H24 Klasse 3M - 5 ton Kind of: overhead travelling crane Capacity: 10 ton (2M) Span: 30 000 mm Tackle speed: 12,5 m/min Rotationspeed: 5 & 20 m/min Displacementspeed: 10 & 40 m/min Radiocontrol: radio control Numbre of riggers : double girder

Takel type: DH 1032 H24 klasse 3M - 5 ton Kind of: overhead travelling crane Capacity: 10 ton (2M) Span: 30 000 mm Tackle speed: 12,5 m/min Rotationspeed: 5 & 20 m/min Displacementspeed: 10 & 40 m/min Radiocontrol: radio control Numbre of riggers : double girder

Demag 10 ton x 28 470 mm Kind of: overhead travelling crane Capacity: 10 ton (2M) Span: 28 470 mm Tackle speed: 0,8 & 8 m/min Rotationspeed: 6,25 & 25 m/min Displacementspeed: 63 m/min Radiocontrol: radio control Numbre of riggers : double girder

Takel type EZLDH 525 H20 klasse 1AM - 10 ton Kind of: overhead travelling crane Capacity: 10 ton (1AM) Span: 28 465 mm Tackle speed: 0,6 & 6,3 m/min Rotationspeed: 6,3 & 25 m/min Displacementspeed: 10 & 40 m/min Weight: 15 ton Radiocontrol: radio control Numbre of riggers : double girder

Table dimensions ( x-y/mm)  1200 x 1000 Slide Dimensions X-Y (mm)  1200 x 1000 Stroke (mm)  190 Slide Adjustment (mm)  150 Shut Height (mm)  700 Accessories  oven with max temperature 500°

Zelfuitlijnende lasrolstelling één aangedreven eenheid één niet-aangedreven eenheid minimale/maximale werkstukdiameter: 500/4500 mm snelheid: 70 gt; 1200 mm/min vermogen: 2 kW - 15,8 ampère WELDINGMANIPULATOR FOR CYLINDRES: yes Max weight on both supports: 20 ton Number of wheels: 8 wheels Coating material on wheels: rubber

Semi-portaal bovenloopkraan - twee vaste hefsnelheden - dubbele drive bovenaan - geen rails nodig, de kraan beweegt over de vloer Kind of: semi-portal crane Capacity: 5 ton Span: 15 050 mm Numbre of riggers : single rigger

Semi-portaal bovenloopkraan - twee vaste hefsnelheden - dubbele drive bovenaan - geen rails nodig, de kraan beweegt over de vloer Kind of: semi-portal crane Capacity: 5 ton Span: 12 875 mm Numbre of riggers : single rigger

Semi-portal overhead traveling crane - two fixed lifting speeds - double driven at the top - no rail required, the crane moves on top of the floor Kind of: semi-portal crane Capacity: 5 ton Span: 12 875 mm Numbre of riggers : single rigger

Semi-portaal bovenloopkraan - twee vaste hefsnelheden - dubbele drive bovenaan - geen rails nodig, de kraan beweegt over de vloer Kind of: semi-portal crane Capacity: 5 ton Span: 12 875 mm Numbre of riggers : single rigger

Semi-portaal bovenloopkraan - twee vaste hefsnelheden - dubbele drive bovenaan - geen rails nodig, de kraan beweegt over de vloer Kind of: semi-portal crane Capacity: 5 ton Span: 12 875 mm Numbre of riggers : single rigger

Semi-portaal bovenloopkraan - twee vaste hefsnelheden - dubbele drive bovenaan - geen rails nodig, de kraan beweegt over de vloer. Kind of: semi-portal crane Capacity: 5 ton Span: 15 050 mm Radiocontrol: radio control Numbre of riggers : single rigger

Semi-portaal bovenloopkraan - twee vaste hefsnelheden - dubbele drive bovenaan - geen rails nodig, de kraan beweegt over de vloer

Semi-portaal bovenloopkraan - twee vaste hefsnelheden - dubbele drive bovenaan - geen rails nodig, de kraan beweegt over de vloer Kind of: semi-portal crane Capacity: 5 ton Span: 15 000 mm Numbre of riggers : single rigger

Semi-portaal bovenloopkraan - twee vaste hefsnelheden - dubbele drive bovenaan - geen rails nodig, de kraan beweegt over de vloer Kind of: semi-portal crane Capacity: 5 ton Span: 15 050 mm Numbre of riggers : single rigger

Kat-No 09-1017 New Mash tanks made of V2A with agitator and cooling jacket with 4 x feet, very stable version • with manhole front DN 430 x 310 mm • with residual outlet DN 90 mm (DIN 11851) • with threaded connection connector DN 95 mm top floor "with stable agitator with 5 paddles refurbished • with cooling jacket with 2 x cooling zones - OBEN: 750 mm wide - UNTEN: 500 mm wide • with 2 x transport eyelets • with tap flap DN 37 mm Dimensions: Diameter Zyl:1600 mm Total diameter: 1800 x 1800 mm Total height:4000 mm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delive ...

Kat. No. 12-2155 in a very good condition max. working pressure allowed: 1,8 bar max. temperature allowed: 130°C DxH: 1800 x 5000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Damrow Double-0 5,000 litre cheesevat. Closed model, CIP cleanable. With Build-in wheydrain suitable for production from Mozerella, Gouda, Tilsit, cheddar, etc. 1x double walled no leaks 1x single wall In good condition. 2 pieces available.

tower silos 4 x 50 m³ / 50000 litres of polyester tanks / Tower silos / flour silos, GRP silos, grain silo / hopper silo / compound feed component silo Top condition Content per silo: 50 m³ / 50000 litres piece / pc: 4 pieces Year of construction: 1994 mass of Tower silos without steel: approx. Ø 2,80 x 12 m high Height of the entire system: 21 m Density/weight: 1,200 kg per m³ approval number: Z 10-22-42 Manufacturer: Polem More details: the silos are in good used condition. According to the age traces are present. The system has complete works until its closure. The system could not be tested yet, because there is no power supply. It is a complete meal silo plant with very thick-walled 4 x 50 m³ GRP silos with a density/weight 1200 kg per m³ is each silo separately to fill up the tanks through several cross conveyor (scraper conveyors). The silo is a spray head to cle ...

Key data: 3200 mm, 287 , 50

Screw diameter: 50 mm Injection weight in polystyrene: 287 g Clamping force: 3200 kN Screw diameter: 35 or 50 mm Stroke volume: 141 /314 cm³ Injection weight in polystyrene: 154 / 287 g/hp Injection pressure: 2,500/1280 bar Clamping force: 320 t Lights Tie bar spacing H x V: 720 x 720 mm Tool installation height - min.: 300 mm Opening distance: 600 mm Microprocessor control: Selogica direct Screen text: german Instruction manual: german FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- all-electric injection moulding machine Total weight: 14,500 kg Total size: 6.5 x 2.1 x 2.2 m Payment terms: 100 % before taking over the machine, net only

Metal band saw blade, band saw blade, metal saw band -Metal saw band: unused -Dimensions: 5000 x 34 x 1.07 x 2/3 - VPVR -Weight: 1.4 kg

screw size: 98 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 8600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 62 mm injection shot weight in Polysterol: 903 g/PS closing pressure: 3300 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.