134,061 used machines on RESALE, but how to find them? Machine Search
Speed: 355-1800/min, nominal voltage: 380V, 50Hz, 3 AC, control voltage: 220/24V, protection class: IP54, nominal current: 100A, control: Heidenhain TNC 355, weight: 2.95t, with handwheel, coolant system, hose nozzle, hydraulic/lubrication unit, pressure accumulator/ hydraulic accumulator, solenoid valves, Bosch components and ORSTA directional control valve. An on-site inspection is possible.
Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+
Various old small machines are available. 1) Lathe Colchester Chipmaster 5x20. 2) Multi-spindle drilling machine Steinel BGS 140. 3) Orbital riveting machine Steinel VS. 4) Hydraulic power unit Sauter HA1202. 5) Laminating machine Sallmetall. 6) Drum pump Flux F 407. 7) Hydraulic power unit Sauter HOV4. An on-site inspection is possible. A package sale is desired.
Machining center in vertical design with automatic return Workpiece dimensions: Length: 200 to 3050 mm Width: 50 to 1250 mm Thickness: 8 to 80 mm weight max 60 kg Performance - 2x vertical drilling unit separately controllable with variable speed. right left V10/32mm. 2.3 kW. Drill length 70 mm, D= max 35 mm - 2x horizontal drilling unit, 6 spindles in X direction, variable speed. right left can be controlled separately. Drill length 70 mm, D= max 20 mm - 2x horizontal drilling unit, 2 spindles in Y direction, variable speed. right left can be controlled separately. Drill length 70 mm, D= max 20 mm - Grooving saw unit X-Y can be swiveled 0?/90? saw diameter 125 mm, rpm 1500-7500 frequency controlled - Dowel insertion station for automatic insertion of dowels on the two transverse workpiece edges 1x left side / 1x right side glue pump, vibrating guide for dowels 8 x 35/40 mm - plau ...
Offer 26128 Technical data: - Max. load capacity in horizontal position 5000 kg - Face plate diameter 1150 mm - Face plate motorized swivel 0 - 130 ° - Rotary movement electr. Infinitely variable - Right + Counterclockwise - Welding current transmission approx. 500 A - Drive 400 V - Table height in horizontal position approx. 1220 mm - Handheld remote control - Space requirement approx. W 1350 x H 1220 x D 1900 mm - Weight approx. 3500 kg - Adapter plate with clamping device for round material
Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!
Delfin Auriga 500 Flow wrapper Serial: 11110 2016, flow wrapper, jaw width 230mm, up[ to 120 cycles per min, infeed length 2100mm, overall length 3700mm, HMI touch screen controls, reel holder up to 500mm film,
Nominal lifting capacity: 5000kg Center of gravity distance: 600mm Total lifting height: 3.3m Engine: FORD Transmission: Grazziano
Cutting capacity: 4300 mm x 4300 mm. Sawblade height: 125 mm. Main motor 13,5 kW / scoring motor 2,2 kW Saw-carriage speed: 1-150 m/min. Returnspeed 150 m/min. Programm fence speed: 90 m/min (limited to 25 m/min) 7 grippers, centers 75/275/475/1075/1825/2625/3425 mm. Machine control: CADmatic 4 ? Professional Hardware: Windows XP (US) TFT display Software showing cutting plans 2-D/3-D, Graphic malfunction diagnostics by video.
Key data: 500 mm, 400 mm, 240 mm
Röders 3-Axis High-Speed Machining Center Compact 3-Axis High-Speed Milling Machine This 2006 Röders RXP 500 is a dedicated 3-axis high-speed machining center, highly regarded in the industry for micro-machining and delivering impeccable surface finishes. Technical Details 1. Machine identification data Name: CNC High-Speed Milling Machine Manufacturer: Röders Model: RXP 500 Machine number: 11714-65 Year of manufacture: 2006 2. Operational parameters Travel (X / Y / Z): 500 / 400 / 240 mm Table size: 550 x 450 mm (T-slots: 14 mm, spacing 63 mm) Max. workpiece weight: 400 kg Axis drives: Linear motors in all axes Feed rate: 0 – 40,000 mm/min Spindle: 14 kW; 42,000 rpm Tool holder: HSK E40 Tool magazine: 21 positions (optional up to 42 positions) Max. tool diameter: 16 mm Connections (Electrical): 400 V 3-phase (390V - 410V) ...
This 4-axis DN SOLUTIONS PUMA 5100 MB was manufactured in 2023. It features a maximum turning diameter of 650 mm and a turning length of 952 mm. The machine is equipped with a 21-inch main spindle chuck and offers a rapid traverse speed of up to 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA 5100 MB turn-mill centre we have for sale. Contact us for further details.
This 8-axis Citizen BNE-51MSY was manufactured in 2018. It features a maximum bar diameter of à 51 mm and a spindle speed of 5,000 min-1. The machine includes 12 turret stations and a slide stroke of 195 mm in the X1 direction. If you are looking to get high-quality turning capabilities, consider the Citizen BNE-51MSY horizontal turning machine we have for sale. Contact us for further details.
This 3-axis SPINNER MT 500/1000 AT was manufactured in 2000. It features an X-axis travel of 210 mm, and Z-axis travel of 930 mm. The machine includes a robust table size of 520 x 900 mm with a load capacity of 400 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER MT 500/1000 AT machine we have for sale. Contact us for further details.
This 4-axis DOOSAN ACE HC-500 was manufactured in 2005. It features an X-axis travel of 850 mm, Y-axis travel of 700 mm, and Z-axis travel of 750 mm. The machine includes a robust pallet size of 500 x 500 mm with a maximum pallet load of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN ACE HC-500 horizontal machining centre we have for sale. Contact us for further details.
This 3-axis DOOSAN DNM 5700 was manufactured in 2017. It features an X-axis travel of 1050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine includes a table size of 1300 x 570 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details.
This 3-axis HAAS VF-10/50HE vertical machining centre was manufactured in 2011. It features a generous X-axis travel of 3048 mm, Y-axis travel of 813 mm, and Z-axis travel of 760 mm. The machine is equipped with a robust table size of 3000 x 800 mm and a maximum load capacity of 1800 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-10/50HE machine we have for sale. Contact us for further details.
This 3-axis YCM XV 560A was manufactured in 2011. It features a table size of 700 x 420 mm and impressive X, Y, and Z travels of 560 mm, 410 mm, and 450 mm, respectively. The machine is equipped with an 11 kW spindle power and a spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the YCM XV 560A vertical machining centre we have for sale. Contact us for further details.
Metal Band Saw manufactured in 1999. This KASTO HBA 520/620 U features a working area of approximately 520 x 620 mm and includes a roller conveyor for efficient material handling. With a total length of around 350 cm, this machine is designed for precision cutting in metal applications. If you are looking to get high-quality cutting capabilities, consider the KASTO HBA 520/620 U machine we have for sale. Contact us for further details.
This TRUMPF TRUMATIC 500 was manufactured in 1998. It features a maximum punching force of 220 kN and can handle sheet thicknesses up to 6 mm. The machine accommodates workpieces up to 150 kg, with a working range of 3000 mm on the X-axis and 1500 mm on the Y-axis. Contact us for more information about this machine.
This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details.
This 3-axis DEMAG Erdotech 500-3300 hydraulic injection moulding machine was manufactured in 2005. It features a screw diameter of 70 mm and a shot weight of 1,230 g. The machine has a maximum daylight of 1,450 mm and includes a handling system with a Wittmann linear robot. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Erdotech 500-3300 machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2003. This Engel DUO 5550/800 features a clamping force of approximately 800 tons and a screw diameter of about 90 mm. It has a shot volume of around 2700 cm³ and a maximum injection pressure of approximately 1900 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel DUO 5550/800 machine we have for sale. Contact us for further details.
amplification -fold: 10-fach diameter: 500 mm workpiece height max.: 210 mm digital readout: 2 Achsen MITUTOYO travel x / y: 200 / 100 mm table-size: 530 x 250 mm glass plate - dimensions: 270 x 170 mm voltage: 230 V weight of the machine ca.: 210 kg dimensions of the machine ca.: 0,80 x 1,05 x 1,70 m - Serial-No.: --- - 2-Axis digital readout The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cone wrapping machine HWM 500 4C for all spears such as Kornspitz, pretzels and pretzel sticks, etc. Universal - Winding machine with infeed belt 1 man waitress for all doughs for wrapping Cone wrapping machine with 500 mm belt width only DGUV V3 tested by us Connection 400V, 16A-CEE plug NEW Machine & SAB Tested with warranty + spare parts service
AUTOMATIC DIGITAL REFRACTOMETER MDEL : RX-5000 ALFA BRAND : ATAGO TYPE : TOUCH SCREEN SCALE : Refractive index RANGE : Refractive index (nD) 1.32420 to 1.58000 BRIX : 0.000 to 100.00% SOLUTION : Refractive index (nD): 0.00001 Brix 0.01% temp 0.01C ACCURACY : Refractive index (nD): 0.00004 Brix 0.03% TEMP CONTROL RANGE : 5.00 to 75.00 C DIMENSION & WEIGHT : 37 x 24 x 14 6.6 kg POWER SUPPLY : AC100V to 240 V, 50/60Hz CONTACT INFORMATION (Ms) Supawadee Kumpone - Toy Manager, Procurement Mobile#: +6693-7478585 Email: supawadeegreatglove.com (Ms) Wilawan Sakulsongboonsiri Mobile#: +6689-1969222 Email: wilawan_sakultopglove
Key data: 1250 mm, 4 mm
Max. cutting length: 1250 mm Max. sheet thickness: 4 mm steel Controlled backgauge Side stop and table extensions Cutting length limitation Cut edge lighting Light barrier to protect the rear area Knife sharpened Weight approx. 2800 kg
Used line for packing beer bottles in cartons from Meypack. Specifications Performance: 60 packs/minute with 2x5 (10 bottles) 40 packs/minute with 4x5 (20 bottles) Packaging Type: Wrapped Carton Box Carton Dimensions: Length: 120 - 300 mm Width: 210 - 400 mm Height: 100 - 350 mm Packaging Formation: 2x5 & 4x5
Transnorm conveyor belt GF 1500-600-500 RA2070 Technical data: Conveyor length (NL): 1500 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 1500 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit ...
Transnorm conveyor belt GF 15000-600-500 RA2067 Technical data: Conveyor length (NL): 15000 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 15000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mi ...
This 8-axis AMADA HFBO 5020 press brake was manufactured in 1998. It features a bending length of 2090 mm and a press capacity of 500 kN. The machine includes a stroke of approximately 200 mm and an open height of around 480 mm. If you are looking to get high-quality bending capabilities, consider the AMADA HFBO 5020 press brake we have for sale. Contact us for further details.
Transnorm conveyor belt GF 1250-600-500 RA2096 Technical data: Conveyor length (NL): 1250mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 1250 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit S ...
CNC lathe Type: TCH 500 Prime/80 Manufacturer: Tajmac-ZPS Year: 2006 Control: Siemens Sinumerik 840D Turning diameter: 550 mm Turning length: 1000 mm Spindle bore: 80 mm X: 360 mm Z: 1100 mm VDI 50 rev.head: 12 positions Spindle speed: 3200 rpm Driven tools Tailstock Machine weight: 9500 kg Machine in good condition, fully functional, under power Find more here - / Contact us at -
Horizon Stitchliner 5500 year 2009 2 x collator VAC-100 saddle stitcher SPF-30 stitching heads Hohner accumulator folder ACF-30 trimmer HTS-30 stacker ST-40 counter 6 million good condition
A cycle-controlled CNC lathe Böhringer is available. Swing diameter over bed/faceplate: 570mm/365mm, center height: 280mm, bed width: 360mm, travel X: 345mm, cross slide dimensions X/Y: 260mm/680mm, bed slide guide length: 520mm, speed: 2500rpm, feed: 50mm/rev, rapid traverse X/Z: 10m/min/5m/min, quill stroke: 190mm, center angle: 60°, max. workpiece weight: 400kg/1000kg/1600kg. Documentation available. An on-site inspection is possible. Expected to be available July 2026.
Offered is a 3-axis CNC tube flame cutting system. Tube diameter: 60mm-500mm, square profiles X/Y: 420mm/420mm, tube length max.: 4500mm, wall thickness max.: 1mm-20mm, cutting speed max.: 24000mm/min, positioning accuracy: approx. 0.5mm, clamping force of the chuck: 30000N, torque max.: 13000Nm, cutting system: Hypertherm Powermax 1650, controller: Burny 10 LCD Plus, machine dimensions X/Y/Z: approx. 4000mm/2000mm/1800mm. The controller has a defect and is currently without function. Viewing possible by appointment.
A Makat depositing and cooling line for hard candies is available. Working width: 530mm, mold cavity arrangement: 2 rows, cavities per row: 19, total cavities per mold: 38, max. stroke rate: 25/min, production capacity 4.5g: approx. 400kg/h, product weight: 2.5g/4.5g, total line dimensions X/Y/Z: approx. 10500mm/1500mm/2300mm. Documentation available. An on-site inspection is possible.
Measurement principle: dynamic light scattering (DLS) Measuring range: 0.3 nm to 10 μm (particle diameter) Measurement angles: 15°, 90°, 175°, Multi-angle particle sizing (MAPS) Min. concentration: 0.1 mg/mL (lysozyme) lower than 0.0001% (0.1 ppm, Latex 100nm) Max Concentration: 50% w/v (sample-dependent) Min sample volume: 12 μL Accuracy: Better than +/- 2% on NIST traceable standards Repeatability: Better than +/-2% on NIST traceable standards Currency: MYR PIC: - Dr. Wong Sze Ting (013 939 6151/ wongsttopglove.com.my) - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my)
working width: 350 mm working length: 5.100 mm hollow: 210 mm Solid hydraulic beam press Bürkle type HS 1/90 35/510 for gluing timber, beams or other pressing tasks. Heating plates without function. Including replacement cylinders as good as new. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ref. №: 4252 Frozen meat block guillotine 2 pcs knives for transverse cutting 2 pcs knives for longitudinal cutting Block cross-section: 520 x 300 mm Processing temperature: > -25 °C Max. throughput: 5000 kg/h Hydraulic lifting device Machine dimensions in cm: Width: 110,0 Length: 240,0 Height: 190,0 Installed power: 6,0 kW Voltage: 400 V, 50 Hz
Consisting of a REX TR/27 500ml and 1000ml filling machine with a Tetra Pak Cardboard Packer TCBP32. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.
Key data: 63 KW, 73 kVA, 400 V
senergino Gas Generator (CHP) SBG 50EL 4.12 TI. E Gas electricity and heat generators from 2011 with unknown operating hours, closed unit with control. 63 KWel x 1,500 rpm, 400 V/50 Hz. Leroy Somer LSA 43.2L8 C674, 73 KVA Manufacturer: senergino Model: SBG 50EL 4.12 TI. E Type: Natural Gas Electricity and Heat Generator Serial Number: D2N002416 Power [KWel]: 63 Voltage [V]: 400 Current [A]: 105 Frequency [Hz]: 50 Year of Make: 2011 Operating hours: unknown Weight unit [kg]: 1,940 Dimensions LxWxH [m]: 2.95 x 1.00 x 2.20
Travel X/Y/Z: 1600mm/400mm/350mm, quill stroke: 350mm, max. workpiece weight: 2100kg, table dimensions X/Y: 2100mm/430mm, table height: 908mm, tool positions: 78, tool holder: SK40, max. torque: 70Nm, rapid traverse: 30m/min, feed force: 7kN. Machine dimensions X/Y/Z: approx. 4700mm/2950mm/2700mm, weight: approx. 9300kg, control: Siemens 840C. The spindle of the machine must be overhauled and was removed as well. Documentation available. An on-site inspection is possible.
x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Heidenhain TNC 310 cnc control C and B-axis manual with display swivel rotary table electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 500 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 20-4500 UpM Vorschub / feed 5000 mm/min. Gewicht ca. / weight ca. 2800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis FANUC Robodrill D21MIB 5ADV Plus was manufactured in 2023. It features a high-speed spindle capable of 10,000 rpm and a robust automatic oil lubrication system. The machine includes a center-through coolant system and a servo turret for enhanced efficiency. If you are looking to get high-quality machining capabilities, consider the FANUC Robodrill D21MIB 5ADV Plus vertical machining centre we have for sale. Contact us for further details.
Height=1.53 m, Overall length= 1.36 m, Overall width= 2.31 m, Net weight= 537 kg,
Key data: 1030 mm, 2 mm
Used guillotine shears of the make Fasti type 1030x2.5 Built in 1969
used
Manufacturer: Haas Model: HSZ-R 500 x 1800 Year of Manufacture: 2008 Type of Machine : Wet Hammer Mil Condition : Used Technical Specifications - Rotor diameter: 1300 mm - Machine inlet width: 1800 mm - Screen perforation (as delivered): 16 mm diameter - Number of hammer tools (full complement): 440 pieces - Grinding bars zone 1 (Mahlleisten Ml.1): 54 pieces - Grinding bars zone 2 (Mahlleisten Ml.2): 42 pieces - Total machine weight (including motor): approx. 12,350 kg - Feed trough weight: approx. 1,100 kg - Sound power level (at full load, 5 m distance): 90 dB(A) - Hydraulic unit (hood opening system): 1.5 kW, 230/400 V, 50 Hz Overall Dimensions - Length: 4790 mm - Width: 2700 mm - Height: 4145 mm Find more here - / Contact us at -
Manual Sheet Feeding (Hand-Fed), Mechanical Clutch-Brake Drive System, Micrometric Cutting Pressure Adjustment, Universal Self-Centering Chase, and Heavy-Duty Cast Iron Construction for Stable and Precise Die-Cutting Performance.
maximum number of results exceeded
please refine your search
