134,051 used machines on RESALE, but how to find them? Machine Search
Used engine few hours Very good condition !
x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm control: Heidenhain total power requirement: kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=2.08 m, Overall length= 2.05 m, Overall width= 1.35 m, Net weight= 170 kg,
PDC-S (Printing Density Control-Spectrophotometer) (II) Remote register control: diagonal Komorimatic continuous dampening Ink unit temperature control KMS - Komori Monitoring System (IV) Cooling and recirculation (Technotrans) Coating unit with chambered doctor blade system (Tresu + Technotrans alpha.v) IR-Dryer (Baldwin-IVT) Impression-cylinder washing device - automatic Plate cylinder - chromed Ink-roller washing device - automatic Blanket washing device - automatic Extended delivery Powder sprayer (Weko AP 110) Blanket cylinder - chromed Model (0,6mm) KPC
x-travel: 1.020 mm y-travel: 510 mm z-travel: 510 mm control: MSC 501 Fanuc table surface area: (APC) 1.200 x 480 mm max. table load: (APC) 550 kg Main spindle:: turning speed range - milling: 10.000 U/min power capacity - milling spindle: 22 / 18,5 kW tool taper: BT 40 Tool-Presetter:: number of toolpositions: 30 pos. tool taper: BT 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 300 mm max. tool weight: 8 kg rapid traverse: 32 m/min feed: 1 ~ 16.000 mm/min Tipp feed: 0 ~ 1.260 mm/min spindle bearing diameter: 85 mm total power requirement: 59,5 kVA weight of the machine ca.: 6,9 t dimensions of the machine ca.: 3,9 x 2,7 x 2,9 m Documents: Chip conveyor: 2x Coolantsystem: high pressure coolant: through spindle coolant: Signal-Light: pallet changer: 2 pos. CNC - Machining Center - Vertical MORI SEIKI - SV 500 B/40 - Clamping devices are NOT ...
Used Pablo cartoner type Pablobox 546. The device forms cartons, glues after manual loading of the product, closes the carton and glues. Year of construction 2020. CE
THERMO HAAKE Viscotester 550 Viscometer with PK 100 D Plate-Cone Measuring System Speed Range: 0.5 to 800 min-1 Uncertainty: ± 0.1% CD Mode: < 0.5% min-1 Torque Range (Ncm) up to 400 min-1: 0.01 to 3 Torque Range (Ncm) up to 800 min-1: 0.01 to 2 Uncertainty: ± 0.5% SDF Temperature range: 50 to +250 °C Power supply: 230/115 V (50/60 Hz) With measuring tank for coaxial cylindrical geometry With measuring unit PK 100D with multiple sensors The MV 3 st mobile is slightly damaged Viscotester 550: Typ002-7026 Haake PK 100 D: Typ002-2089
Number of knives: Z2 V2 width: 17 mm circle diameter: 160 mm material: Stahl : WP Bore diameter: 40 mm Jointing rebate cutter Weinig type 530 160 01 / 2 08 for use on the planing spindle of Weinig planing machines. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC Deep Hole Drilling Machine Shinil (Korea) Year: 2009 Control: Fanuc Oi-TD Key Technical Specifications • Drilling diameter (solid): Ø 50 – 200 mm • Counter boring max: 500 mm • Trepanning max: 500 mm • Max drilling depth: 6000 mm (6 meters) Workpiece & Motion • Z-axis stroke (tool free): 6000 mm • Work spindle stroke (max): 4000 mm • Z-axis rapid feed: 5000 mm/min • Z-axis cutting feed: 0 – 1000 mm/min • Control axis: Z-axis CNC controlled Spindle & Speed Range • Headstock rotation: 5 – 30 rpm • Tool holder spindle speeds: • 50 – 500 rpm • 25 – 250 rpm • 16.6 – 166 rpm • 8.3 – 83.3 rpm Cooling & Drives • Coolant pump control: Inverter-driven • Motor control: NC controlled spindle & tool rotation Power & Installation • Total power: approx. 335 kW • Power supply: AC 440V / 60Hz ...
max. format 37.50 x 52 cm Year of manufacture 2004 PCS-H color remote control Ryobimatic Film Dampening Units Technotrans cooling unit RPC Semi-Automatic Plate Changing Automatic washing equipment Dry pollinator Reading totalizer: approx. 35 million print
- Heating coil 250 kW - Voltage: 575 V / 60 Hz More information on request!
Model: 7920.5020 Year: 2022 Condition: Used Serial Number: 6815 1423 2204 0108 Stock Number: 3337 Content 1300 litres Description: Stainless steel freezer with double door and lock Refrigerant: R290 Temperature range: -18 °C to -22 °C Power:230VAC, 50Hz, 780W Dimensions: 830 x 1480 x 2050 mm Weight: 201 kg
Key data: 6000 mm, 1200 mm, 1800 mm
Basic machine data Used 7-axis mill-turn machining center from MATEC Make: MATEC Type: 50HVU Year of Make: 2011 Condition: Mint Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR410 Travels: x-travel: 6000 mm // y-travel: 1200// 1400 mm // z-travel: 1800 mm Technical data: • A-axis: infinitely variable, horizontal / vertical • B-axis: infinitely variable • C-axis: rotary table with rotary function 200 rpm • Spindle: 20-8000 rpm • HSK A-100 interface • 60-fold tool changer • Rigid table: 1235 mm width • Positioned dividing head for shaft machining • IKZ (internal coolant supply) • 2 x chip conveyors • Infrarottprobe The machine is in mint condition. Machine has only 2450 PGM hours Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.
Model: 7920.5020 Year: 2022 Condition: Used Serial Number: 751004716 Stock Number: 3336 Content 1300 litres Stainless steel freezer with double door and lock Refrigerant: R290 Temperature range: -18 °C to -22 °C Power: 230VAC, 50Hz, 780W Dimensions: 830 x 1480 x 2050 mm Weight: 201 kg
X-axis: 425mm, Y-axis: 400mm, Z-axis: 240mm, Spindle speed: 42000rpm, Probe: Renishaw, Number of tools: 40, Spindle interface: HSK40, with paper filter. An on-site inspection is possible.
Food Tools 5AFCE Cheese cutter Stainless, this ingredient reduction machine uses a wire grid to cut up to 40lb blocks of cheese or butter into smaller portions. Up to 120 products per hour, with a box of spare cutting wire, ideal for dairy facilities and bakeries
Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-30 m/min. Weinig Powermat 500, year of manufacture 2010, window version ------------------------------------------------------- technical details short summary: -------------------------------------------------------- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4 axially CNC-controlled - Spindles 2, 3, 4, and 5 radially CNC-controlled - Window package for glazing bead removal: Pneumatic indexing of right and top spindles for bead removal See attached PDF document for detailed description Options with additional costs: -------------------------------------------------------- - Existing planing and molding tools by Leitz (price on request!) - Maweg Saturn Duo single-slot wood sander, manufactur ...
Four-Way Planer Little Type Powermat 500 Technical data: - Planing width (mm): 230 - Planing height (mm): 140 - Waves: 6 1st Shaft: Down 2nd wave: right 3rd wave: left 4. Shaft: top 5. Shaft: top 6. Shaft: down - Spindle speed (rpm): 8000 - Total connected load (kW): 65 - Rated current (A): 142 - With planer heads Powerlock System - Program memory - Soundproofing hood - CE compliant
Used Multivac packer type R 530. Year of manufacture 2007. 400V, 50Hz, phases 3+N, power 20.5 kW, current 47A. Bottom foil, hard width: 450mm, thickness: 400um Top foil soft width 450 mm, thickness 88um Included : Spare sealing plate, seal for the sealing mold, inserts for changing the depth of the extruded film, basic set of spare parts, manufacturer's documentation and user manual, templates for inserting the product, traverse for printing on packaging from a Hitachi printer, spare cutting die cut sharpened by Multivac packed in a box. Capacity 10 beats per minute (8 pieces per cycle)
heavy thickness planer Paoloni S 515 Planing width 510 mm Planing height 250 mm Electric height adjustment with 10th button for precise positioning 4-Knife Safety Planer Shaft Table led four times Main motor 4 kW Feed rate 5, 8, 12.5, 19.5 m/min Steel - Pull-out roller Link pressure beams made of solid aluminium material Under-table roller Year of manufacture 1997 CE conformity Machine is WORKSHOP TESTED in VERY GOOD CONDITION From stock Lieboch
Labeler Manufacturer: PAGO Type System 580 Suitable for self-adhesive labels Carton labellers (folding cartons), 3-sided labellers Output 75- max. 200 pieces/min. Operating instructions available
Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches
Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches
Centrifugal concentrator Eppendorf plus 5305 Model: concentrator plus Max speed: 1400 RPM Heating Levels: Ambient, 30°C, 45°C, 60°C Time range: 1 min to 9 h 59 min, continuous Vacuum level:
Heidolph Pumpdrive PD 5206 Peristaltic Pump 1 Channel Motor speed: 24 to 600 rpm Flow rate: 1.3 to 3.9 mL/min Weight 7.7 kg With HEIDOLPH SP QUICK single-channel pumphead In excellent condition Year of Manufacture: 2006
Description Calendar or ring binder Punching tool 2 pieces, round hole 4mm, pitch 3:1 with thumb hole suitable for Renz Super 500
Description Palamides Stacking Delivery Alpha 500 Year 10-2011 for mark-free laying Stahlfolder Interface Output Table
Description Compressor Worthington Rollair RLR 750 BM 6 500 T with Hankison refrigeration air dryer with approx. 28,000 operating hours Fully automatic, internally completely piped and wired compact system, single-stage oil-injected compression, air-cooled, soundproofed Operating pressure 10 bar Volume flow 40 m3/hour Output 5.5 KW Boiler 500 litres ROLLAIR_550_2000_EN
Description MBO T 530-6-4-X-F Pocket folding machine 16 pages Folding machine for the production of books, magazines, brochures and other works. Max. paper size: 53 x 84cm Min. paper size: 14 x 18cm Flat pile feeder with piece counter and Vacuspeed sheet circulation control – double sheet control 1st station T530-4 with 6 cassettes, perforation and creasing mobile 2nd station T530-4 with 4 cassettes, perforation and creasing Mobile knife station 500-X
Substructure for conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand, frame for roller conveyor -Manufacturer: Soco System, base frame height adjustable -Type: Width 475 mm -Height: 535 to 900 mm, continuously adjustable -Quantity: 1 piece base available -Transport dimensions: 475/180/H535 mm -Weight: 8 kg/pc.
General SKU050C545 MakeBHS Sonthofen GmbH TypeAutopress AP-500/14/20/VA No.F-00946-305-01 ATEX Year of construction2005 LocationBarneveld Specified Features - Filterpress Material finishMirror polished inside Pressure Working pressure12 Bar Main Features MaterialStainless steel Pressure12 Bar Surface4.7 m2 Filterpresses Filter pressGas-tight, fully automatic filter press(1x) Filter surface4,76 m2 Stainless steel plates(1.4404) Number of platens14, dia. 510mm Cake capacity52 l, Max. Temp. -30/+200 Degr. C. Hydraulic closingcheck With hydraulic unitcheck Motor4,0 KW, 400/690 Volt (Ex) Automatic openingWith hydraulically operated scraper MaterialStainless steel 1.4552, Stainless steel 1.4306 (304L) Information Floorspace3,6 x 1,5 m Total height3,7 m Weight4000 kg CEcheck ATEX compatiblecheck Extra SpecificationsBHS Autopress filters are discontinuous, fully ...
A precision lathe is offered: distance between centers: 1500mm, center height: 265mm, swing diameter over bed: 530mm, speed range: infinitely variable up to 2000rpm. Machine dimensions X/Y/Z: approx. 2700mm/850mm/1400mm, weight: approx. 2100kg. The brake has a problem. Inspection possible by appointment.
Eppendorf Mastercycler 5332 Personal PCR Thermal Cycler Temperature range: 4°C - 99°C Temperature distribution: 95°C ± 1.0°C Temperature accuracy: ± 0.2°C Sample capacity: 25 x 0.2 mL tubes or 16 x 0.5 mL tubes
General SKU004Y029 MakeSeitz TypeEF 100/500 CW No.8402 Year of construction1969 Mounted on legscheck Pressure Working pressure3 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Surface0.8 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface0,75 m² Capacity580 l Plate sizesø 980 mm Top connectionscheck Liquid outletDN50 With jacketcheck Max. temperature165°C MaterialStainless steel 1.4571 (316Ti) Information LocationBarneveld Floorspace1,5x1,5 M Total height2,1 MDiscountNutsche filtersSeitz - WerkeDiscountFilters > Nutsche filtersBrand > Seitz - Werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mor ...
EPPENDORF 5702 Laboratory Centrifuge with A-4-38 Rotor Model No.: 5702 Type: Non-Refrigerated Centrifuge Dimensions: 24x58x32 cm Maximum g-force: 3000 rcf Speed Range: 100-4400 RPM Power: 240 V, 50/60 Hz, 200 W Oscillating bucket rotor A-4-38 4 cylindrical pods of 85 ml With 2 adapters 5702724009 for 4 tubes with a diameter of 17.5mm (9 to 15ml) With 2 adapters 5702719005 for 4 tubes with a diameter of 13.5mm (2.6 to 7ml) Tested at 3500 RPM Year of Manufacture: 2006
REALUX BK 5000 Trinocular Microscope - 5 Objectives New equipment in its original packaging Model: BK 5000 Trino Trinocular head Eyepieces: WF 10X-20 mm Eye diameter: 23.2 mm XY plate: Size 175 x 145 mm, Displacement 78x55 mm - Object guide for 2 blades 3W LED lighting 5 infinitely corrected plan-achromatic IOS lenses: IOS PL ACH 4×/0.10 W.D. = 12.10 mm IOS PL ACH 10×/0.25 W.D. = 4.64 mm IOS PL ACH 20×/0.40 W.D. = 2.41 mm IOS PL ACH 40×/0.66 W.D. = 0.65 mm IOS PL ACH 100×/1.25 (oil) W.D. = 0.12 mm
OHAUS Achiever 5000 Vertical Rod Stirrer For laboratories Model: ACHIEVER 5000-60 (E-A51ST060) Speed: 30 to 2,000 rpm Capacity: 40 L Display: LED Voltage: 115/230 VAC Power: 190 W Shaft Diameter (Metric): Up to 8.5 mm Dimensions (L x W x H): 235 x 90 x 285 mm Delivered without rod In excellent aesthetic and working condition
Surface Grinding Machine BERGAMINI BERMI 500 Matic, capacity 500x200 mm. Automatic cycle, Max working dimensions: 500x200 mm, Longitudinal travel x axis: 505 mm, Cross travel y axis: 200 mm, Clearance between worktable and spindle axis: 350 mm, Feed rate x axis: 2-20 m/1, Feed rate y axes: 0,5 - 1 m/1, Wheel speed: 0 - 2800 rpm, Wheel dimension: 200x20x50 mm, Spindle motor power: 1,8 Kw, Weight: 1.150 Kg, Accessories: Auto cycle, DRO, elecro-permanent magnetic plate
A compact screen printing machine Thieme is available. Print dimensions X/Y: 750mm/1050mm, max. screen frame dimensions X/Y: 1200mm/1400mm, max. print material height: 40mm, squeegee speed: 75m/min, printing speed: 950cycles/h, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1350mm, weight: approx. 700kg. An on-site inspection is possible.
groove width: 90 mm drawing length: 550 mm working speed: m/min table surface area: 400x300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m a lot of tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Film width: 420mm, max. film roll diameter: 280mm, film length range: 500-1000mm, film core diameter: 76mm, film type: airpad, film thickness range: 0.042-0.08mm, capacity: 25-49 cycles/min, fuse protection: 16A, connected load: 2kVA, energy consumption: 1.1kWh, compressed air connection hose diameter NW10: 4-8bar, air consumption: max. 82Nl/min during cushion production, max. 3.5Nl per cycle, continuous sound pressure level: 70dB, length: 1600mm, width: 800mm, height: 1300mm, weight: approx. 266kg. An on-site inspection is possible.
used
hogedrukkoeling via de spindel spanentransporteur X-axis: 1660 mm Y-axis: 510 mm Z-axis: 510 mm Table dimensions: 2000 x 510 mm Max weight on the table: 1000 kg Admission in spindle (ISO): BT-40 Power on the spindle: 18,5 kW Control : Mazatrol 640M Toolchanger: yes Number of toolholders: 30 positions Number of rotations: 12 000 rpm Weight: 8250 kg
maximum number of results exceeded
please refine your search
