128,402 used machines on RESALE, but how to find them? Machine Search
Three burners are available. 1) Elco. 2) Seibold WV 500, year of construction: 2022, fuel: light oil EL, calorific value: approx. 10kWh/l, fuel flow rate: approx. 160l/h, nominal heat output: 1600kW, pilot burner fuel: propane, propane calorific value: approx. 26kWh/nm³, propane pre-pressure: 100mbar, max. chamber temperature: 270°C, max. chamber pressure: 3mbar. 3) Weishaupt, year of construction: 1999, output range: 474kW-2491kW. On-site inspection is possible.
Volume: 5000l, permissible operating temperature: 80°C. On-site inspection is possible.
A Nilfisk industrial vacuum cleaner for use in sensitive production environments is available. Power: 1.5kW, max. negative pressure: 18.5kPa, air volume flow: 192m³/h, container volume: 25l, main filter area: 1m², dust class: L/M/H. Machine dimensions X/Y/Z: approx. 800mm/450mm/1200mm, weight: approx. 86kg. Documentation available. On-site inspection is possible.
Web width min./max.: 214mm/686mm, max. roll diameter: 1500mm, production output: 1000 covers/min. The machine is not equipped with peel-and-seal, but only with wet gumming. Including printing unit 2+1. The machine can cut and punch envelopes with windows. Documentation available. On-site inspection is possible.
table diameter: 500 mm table load: ? t table height: hor. 235 / Sph. vert. mm groove width: 18 mm total power requirement: - kW weight of the machine ca.: 0,270 t dimensions of the machine ca.: 800640235 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Cookson dispensing machine for the SMT industry is available. Dispensing capacity 50 mil pitch solder paste: 25000 dots/h, dispensing capacity 3mm pitch SMD adhesive: 22000 dots/h, dispensing range X/Y: 450mm/450mm, travel X/Y/Z: 483mm/483mm/55.8mm, feed X/Y: 406mm/s, SMEMA compatibility: available. Including spare parts, seals, hoses etc. Documentation available. On-site inspection is possible.
surface area: 430 x 710 mm no. of flutes: 5 groove width: ? mm table length: 710 mm table width: 430 mm table load: 200 kg weight of the machine ca.: 250 kg dimensions of the machine ca.: 800600700 m No. 5304 Universal table DECKEL 2038 - 500 / FP 3 + 4 Rotation range 360 Tilting range from/to machine 45/15° Swivelling range right/left +/- 45 Transport dimensions approx. 800 x 600 x 700 mm Weight approx. 250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Memmert universal oven and a Binder climate chamber are available. 1) Memmert UM 500, temperature range: 30°C-200°C, volume: 108l, internal dimensions X/Y/Z: 560mm/480mm/400mm, external dimensions X/Y/Z: 710mm/760mm/550mm. 2) Binder KBF 240, temperature range: 0°C-100°C, volume: 240l, output: 2.2kW, max. operating pressure: 15bar, refrigerant: R134a, internal dimensions X/Y/Z: 800mm/600mm/500mm, external dimensions X/Y/Z: approx. 1050mm/1150mm/750mm. Documentation available. On-site inspection is possible.
A lifting, tilting, and sorting system for bulk materials within grid boxes is available. The system lifts the grid boxes approximately 3-4 meters high, tilts them into a transport vibrator, and the parts are then provided to the sorting system in a reduced quantity (feed rate regulation). Load capacity: 1000kg, pressure: 140bar. Documentation available. On-site inspection is possible. Expected to be available from the end of 2024.
A complete material conveyor system for plastic granulate is available. Components: Control system for 10 end devices, side channel compactor with filter and six color dosing devices for direct coloring, six material conveying pots. On-site inspection is possible.
faceplate diameter: 500 mm total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
carrying capacity: 500 kg number of suction cups: 6 suction cup dia.: 215 mm Vacuum lifter VH 6-500 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device nex ...
length: 850 mm height: 1050 mm total power requirement: 18,4 kW weight of the machine ca.: 200 kg dimensions of the machine ca.: 850 x 450 x 1050 mm Year of construction 2020 demonstration machine, as new Easy ARC 01.02 FD-B6 Welbee P500L welding robot station MIG / MAG / water-cooled / torch RTW5000H / welding robot type FD-B6 with welding table 2000x1200mm Hole diameter 28 mm The mobile welding cell for the craft business Setting range MIG / MAG 20 - 500 A Steplessly adjustable switching levels Duty cycle at max.current 40 ° C 50% Current at 100% ED 40 ° C 410 A Wire feed speed 0 - 22 m / min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 690 mm table load: 500 kg swivelling range: 0 - 90 Grad table load: horizontal 500 Kg table load: vertikal 250 Kg boring diameter: 100 mm table turning speeds: 0,2 - 1,9 U/min total power requirement: 0,37 kW The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in ...
Control: Manufacture: FANUC 18i-MB x-travel: 510 mm y-travel: 360 mm z-travel: 300 mm table surface area: 600 x 360 mm spindle turning speed - stepless: 12000 U/min dimensions of the machine ca.: 1400 x 2300 x 2300 mmxmmxmm weight of the machine ca.: 2.6 t tool piece magazine with: 24 Plätzen tool piece magazine with: 20 Plätzen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Diameter: 230 mm table diameter: 500 mm workpiece height: 150 mm weight of the machine ca.: 2 t dimensions of the machine ca.: 2 x 1.2 x 2.2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
center hole: 2-50 mm workpiece diameter: 8-125 mm workpiece length - min.: 50 mm workpiece length - max.: 1000 mm column - center height: 145 mm grinding wheel speeds:: number: 3 from/to: 13000-45000 U/min spindle turning speed range: 400 U/min dimensions of the machine ca.: 750x850x1800 mm weight of the machine ca.: 475 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 5000 kN
Offer(4x): Engel Duo 1800/500 BJ./YEAR 2016 38500h
Stainless steel tanks Manufacturer Noorden Capacity 500 litres Mobile standing stainless steel tank Double jacket for heating and cooling without pressure Product space pressure- and vacuum-resistant -1/+3 bar Operating temperature product space around jacket 150 °C Magnetic stirrer on the underbody Power 0.25 kW
Rilecart B-599 Automatic Wire Binding Machine (2004) The machine is in working condition and available for inspection upon request. This Rilecart B-599 has been running reliably without any issues. It has been well maintained and upgraded with several valuable features: • Safety light curtains installed • Pneumatic pressure adjustment for the carremata • Modified wire unwinding system for improved handling Included with the machine: • 2 tool sets: [TO BE COMPLETED — e.g., 3/8" and 5/8"] • Complete with all original manuals and wiring diagrams Key Features: • Year: 2004 • Works with spooled double loop wire • Compatible with both 3:1” and 2:1” pitch wires (from 1/4” to 1-1/4”) • Binding size: min. 100 x 80 mm, max. 450 x 600 mm • Dedicated tool sets required per wire diameter • Productivity: up to 4000 pieces/hour (actual output depends on pro ...
Stainless steel tanks Manufacturer Tannroda GmbH, stainless steel construction Type SLT/BB 001 - No. 548 Capacity 2200 litres Cylindrical stainless steel tank standing on feet Material in contact with the product 1.4404 Interior -1/+3 bar Double-jacketed pressure and vacuum resistant Heated and cooled Agitator
Manufacturer: Bosch Model: TFC 5532 Year of Manufacture: 2016 Cups: 4 x 50g, 6 x 50g Designation: Forming Machine Technical Specification Bottom Foil Sterilization: Saturated Steam Top Foil Sterilization: Saturated Steam Bottom Foils: PS, PS-EVOH-PS, PS-EVOH-PE, PS Mono-Laminate foil, transparent and multicolored 1.05 mm Top Foils: Pet-Alu-Pet, 9-12-9 µm Filler 1: Viscous products without particles Filling range: 20 - 75 ml Filler 2: Liquid products without particles, hot filling 30-60°C Filling range: 20 - 75 ml Sorting Filler 1: Yogurt two-colored; pudding single-colored or with swirl/marble design Sorting Filler 2: Pudding or jelly single-colored Performance: 4 x 50g: 28 cycles equals 40,320 cups / h Punching: 4-set and 6-set punching --------------------------------------------------------------- Important Control Functions Cup Printing: Laser (not ...
Key data: 630 mm, 620 mm, 710 mm
ÖKK HP 500S CNC Horizontal Machining Center CNC Control Fanuc 160is-MB Pallet table size 500 x 500 mm Number of pallets 2x Table load 400 kg X-axis travel: 630 mm Y-axis travel: 620 mm Travel Z-axis: 710 mm Table Indexing 0.001° Spindle Heads MAS BBT40 Spindle speed 100 - 12,000 1/min Spindle drive 11/7.5 kW Number in Stacks: 60 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock. We are selling this machine at a special price, called "as seen". This means that we do not check the condition of the machine.
Double-Belt weighing system for large volumes of 1-50kg of loose materials as bio-pharmaceuticals, food, farm chemical and fertilizer, building materials, ceramcis, chemicals, drug ingredients, seeds, cereals, charcoal, flow soil, plastic grains, etc. - Specifications: 65 liter hopper | all product contacting parts in stainless steel (SS340) | frame in mild steel with painted surface | Accuracy (depending on product): 0,5-1,0% | pre-Set-Option for 10 programs | max. speed of the machine in neutral: 15 cycles/minute. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available ...
Very large linear weigher for high volume weighing with 2 heads. - Specifications: weighing range: 5-50kg | max. speed of the machine in neutral: 20 cycles/minute | accuracy: 0.2% (depending on product) | power: 2.0kW | machine dimensions: L3300xW3000xH4700mm (including 1400mm standing frame/can be customized) | weight: 1800kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Suitable for measuring all types of milling and drilling tools, profiles, punching tools, drive and cardan shafts, profile rollers, etc. Accessories: Measuring table adjustment with digital display, Screen diameter: 500 mm, Enlargement: 50 and 100 times, Swivel range of the upper table: +/- 2 mm, Connected load approx.: 230 V / 50 Hz, Dimensions W x D x H approx.: 1200 x 700 x 1800 mm, Weight approx.: 400 kg, colour: Light grey
Fully automatic powder filling system, triple auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. With Wi-Fi function, remote control and data download system. Easy cleaning, movable conveying platform and recycle funnel. SIEMENS PLC, SCHNEIDER Servo Motor, SCHNEIDER Inverter, AIRTAC pnematics, HBM weighing sensor (Germany). 2 packaging modes: High speed or High Accuracy. Specifications: stainless steel (SS304) version | filling range: 10-500g | accuracy: +/- 0.3-1% (high speed mode), +/-1-2g (high accuracy mode) | suitable for: metal cans, glass bottles, plastic jar, cardboard cups, etc. | container dimensions: diameter 40-130, heig ...
Hugo Beck Flexo 500 S – Shrink Wrapping Machine Machine details: • Model: Flexo 500 S • Manufacturer: Hugo Beck • Year of manufacture: 04/2006 • Power supply: 400 V / 50 Hz • Power rating: 3 kW • Rated current: 5 A • Location: Dettingen, Germany Description: Robust and reliable shrink wrapping machine from the well-known German manufacturer Hugo Beck. This Flexo 500 S, built in April 2006, is in good and working condition. Ready for immediate use in production environments and suitable for a wide variety of packaging applications.
Description: Type : Oil Transformer Finish : Hermetic Make : SGB Year of construction : 2016 Condition : New Rated power : 4200 KVA Medium Voltage : 22KV +- 2X 2.5% Low voltage : 400 V Groupset : Dyn 5 Frequency : 50 Hz Cooling Type : ONAN Gross vehicle weight : 9030 kg Oil weight : 1940 kg DIALA S4 ZX-I Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery . Available for further questions Mon to Sat 8 a.m. to 10 p.m.
used
Cutting machine IDEAL 5221-05 EP, machine number 2848081, year of manufacture 2008, in good condition, immediately available Rsbr Sbovt Rt Ao Nwkou If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Fully automatic powder filling system, double auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. With Wi-Fi function, remote control and data download system. Easy cleaning, movable conveying platform and recycle funnel. SIEMENS PLC, SCHNEIDER Servo Motor, SCHNEIDER Inverter, AIRTAC pneumatics, HBM weighing sensor (Germany). 2 packaging modes: High Speed or High Accuracy | - Specifications: stainless steel (SS304) version | filling range: 10-5000g, accuracy: +/- 0.3-1% (high speed mode), +/- 1-2g (high accuracy mode) | suitable for: metal cans, glass bottles, plastic jar, cardboard cups, etc. | container dimensions: diameter 50-200, ...
Basic Automatic Linear Auger Filler with weight feedback via separate weigher. Including free flow device for better product flow control and including dustproof cover. SIEMENS PLC controlled with SIEMENS Touch Screen. - Specifications: Hopper volume: 45 liter | filling weight: 10-5.000g | stainless steel version with servo motor | packing accuracy: 0-2% (at 0-100g), 0-1% (at 100-550g), 0-0.5% (at 500g and more) (depending on product and total weight) | max. speed of the machine in neutral: 40 cycles/minute | power: 380V, 1.6kW | compressed air: 0.05m?/min, 6bar | machine dimensions: L2000xW1000xH2100mm | weight: 200kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 di ...
Basic Automatic DUAL Linear Auger Filler (two filling stations) with weight feedback via separate weigher. Including free flow device for better product flow control and including dustproof cover. SIEMENS PLC controlled with SIEMENS Touch Screen. - Specifications: hopper volume: 85 liter | Filling weight: 10-5.000g | stainless steel version with servo motor | packing accuracy: 0-2% (at 0-100g), 0-1% (at 100-550g), 0-0.5% (at 500g and more) (depending on product and total weight) | max. speed of the machine in neutral: 80 cycles/minute | power: 380V, 3.2kW | compressed air: 0.05m?/min, 6bar | machine dimensions: L2000xW1000xH2100mm | weight: 400kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packag ...
Fully automatic powder filling system, single auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. - Specifications: stainless steel (SS304) version | filling range: 10-500g | accuracy: +/- 0.3-1% | suitable for: metal cans, glass bottles, plastic jar, paper bags, etc. | container dimensions: diameter 40-80, height 60-180mm with different can feeding screws | max. speed of the machine in neutral: 60 cycles/min | power: 220V, 1.6kW | machine dimensions: L1450xW1230xH1800mm | weight: 190kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new p ...
Semi-automatic auger filler for 100-5000g. Stand-alone version including screw conveyor and storage container. Also included are: horizontal screw conveyor to prevent undesired trickling, dust removal preparation, PLC control and touch monitor, weighing sensor (works automatically with each dose), bag clip mechanism, screw conveyor for 500 and 2000g doses, lid for screw conveyor so it is closed. Suitable for filling into bags, cans, glasses, other containers. - Specifications auger filler: hopper volume: 50 litres | filling weight: 10-5000g (change of dosing screws required) | stainless steel version AISI 304 | servo motor | packaging accuracy: 1-2% (depending on product and total weight) | max. speed of the machine in neutral: 50/minute | current: 1.5kW, 3P, 380V | machine dimensions: L600xW800xH1000mm | weight: 100kg. The screw conveyor has a stainless steel AISI 304 body with stainles ...
Stand-alone Auger Filler with weight feedback via load cell and dual speed filling (fast volume filling and then slow accurracy top up), including pneumatic flap to stop product after filling and including dustproof cover. SIEMENS PLC controlled with SIEMENS Touch Screen. - Specifications: Hopper volume: 100 liter | filling weight: 1.000-50.000g | stainless steel version with servo motor | packing accuracy: 0-0.2% (at 1-20kg), 0-0.1% (at 20kg and more) (depending on product and total weight) | max. speed of the machine in neutral: 30 cycles/min | power: 380V, 3.2kW | machine dimensions: L1130xW950xH2800mm | weight: 500kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 ...
Stand-alone Auger Filler with weight feedback via connected weigher. PLC controlled with Touch Screen. Hopper volume: 50 liter. Filling weight: 10-5000g. Stainless steel version with servo motor. - Including: Level Split hopper for easier cleaning, Filling head height adjuster, Free Flow Device for better control of product flow and including Dustproof Cover. - Specifications: packing accuracy: 0-2% (at 0-100g), 0-1% (at 100-500g), 0-0.5% (at 500g and more) (depending on product and total weight). Packaging speed 50 cycles/minute | power: 220V, 1.4kW | machine dimensions: L1150xW1000xH2100mm | weight: 200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for cus ...
Stand-alone Auger Filler with weight feedback via load cell. PLC controlled with Touch Screen. Hopper volume: 50 liter. Filling weight: 10-5000g. Stainless steel version with servo motor. - Including: Level Split hopper for easier cleaning, Filling head height adjuster, Free Flow Device for better control of product flow and including Dustproof Cover.- Specifications: packing accuracy: 0-1.5% (at 0-100g), 0-1% (at 100-500g), 0-0.5% (at 500g and more) (depending on product and total weight). Packaging speed 40 cycles/minute | power: 220V, 1.4kW | machine dimensions: L1150xW1000xH2100mm | weight: 200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized ...
Stand-alone Auger Filler with weight feedback via connected weigher. PLC controlled with Touch Screen. Preset programming possible. Hopper volume: 25 liter. Filling weight: 10-500g. Extension of filling range to 5-600g possible when second dosing screw is added. Built-in filling head height adjuster and weighing cells guarantee accuracy by means of permanent control and automatic correction of dosage. Stainless steel version with servo motor. - Including: Level Split hopper for easier cleaning, Filling head height adjuster, Free Flow Device for better control of product flow and including Dustproof Cover. - Specifications: packing accuracy: 0-2% (at 0-100g), 0-1% (at 100-500g), 0-0.5% (at 500g and more) (depending on product and total weight). Packaging speed 50 cycles/minute | power: 220V, 0.95kW | machine dimensions: L800xW790xH1900mm | weight: 130kg. Please note that our new prices ar ...
Bulk Bag unloading system with lifting crane incl. vacuum pump with a capacity of up to 5000kg/h. - Specification of the lifting crane: max. weight per bag: 1T | max. bulk bag size: L1200xW1200xH1700mm | machine dimensions without side crane: L1740xW1740xH5400mm | - Specification of the vacuum pump: Capacity: max. 5000kg/h | power: 380V, 5.5kW | hopper diameter: 650mm | discharge diameter: 420mm | height of vacuum pump: 1800mm. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possibl ...
Vertical packaging machine with piston pump for dosing liquids. Especially for customized pouches with regular or irregular shapes such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific bag layout. PLC controlled, operation via touch screen. - Specifications: bag sizes: pillow bags: 3-side or 4-side seal pouches: L(40-170)xW(20-110)mm | suitable film width: 220mm | suitable film: composite film, heat sealable | dosing range: 1-30ml | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2,8kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L930xW750xH1920mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available ...
Vertical packaging machine with auger dosing unit for powders. Especially for customized pouches with regular or irregular shapes such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific bag layout. PLC controlled, operation via touch screen. - Specifications: bag sizes: pillow bags: 3-side or 4-side seal pouches: L(40-170)xW(20-110)mm | suitable film width: 220mm | suitable film: composite film, heat sealable | dosing range: 1-30g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2,8kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L930xW750xH1920mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available i ...
Vertical packaging machine with volumetric cup filler for granules. Especially for customized pouches with regular or irregular shapes such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific bag layout. PLC controlled, operation via touch screen. - Specifications: bag sizes: pillow bags: 3-side or 4-side seal pouches: L(40-170)xW(20-110)mm | suitable film width: 220mm | suitable film: composite film, heat sealable | dosing range: 1-30g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2,8kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L930xW750xH1920mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are availa ...
Vertikale Verpackungsmaschine mit Schneckendosiereinheit f?r Pulver. Folgende Beuteltypen sind konfigurierbar: Schlauchbeutel mit R?ckennaht, 3-Randsiegelbeutel oder 4-Randsiegelbeutel (Aufpreis). SPS gesteuert, Bedienung ?ber Touchscreen, pneumatisch angetriebene Quersiegelung. - Specifications: bag sizes: pillow bags: L(20-160)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-160)xW(30-120)mm | suitable film width: 240mm | suitable film: mono-material or laminated, heat sealable | dosing range: 1-100g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L600xW720xH1590mm | weight: 250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machine ...
Vertikale Verpackungsmaschine mit Kolbenpumpe f?r das Dosieren von Fl?ssigkeiten. Folgende Beuteltypen sind konfigurierbar: Schlauchbeutel mit R?ckennaht, 3-Randsiegelbeutel oder 4-Randsiegelbeutel (Aufpreis). SPS gesteuert, Bedienung ?ber Touchscreen, pneumatisch angetriebene Quersiegelung. - Specifications: bag sizes: pillow bags: L(20-160)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-160)xW(30-120)mm | suitable film width: 240mm | suitable film: mono-material or laminated, heat sealable | dosing range: 1-100ml | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L700xW600xH1720mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 differe ...
Vertical packaging machine with volumetric cup filler for granules. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(20-160)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-160)xW(30-120)mm | suitable film width: 240mm | suitable film: mono-material or laminated, heat sealable | dosing range: 1-100g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L700xW600xH1600mm | weight: 280kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediatel ...
Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed). Equipped with: quick change former assembly | SIEMENS PLC | WEINVIEW touch screen | eye mark sensor for seal/cutting position | servo driven sealing unit for end sealing | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 30 cycles/min | bag sizes: L(60-600)xW(200-585)mm (double film pulling L = 1100mm), gusseted stand-up pouches: L(60-600)xW(140-500)xD(100-250)mm (double film pulling L = 1100mm) | suitable film width: 420-1200mm | product contact parts from: AISI 304 (optional for surcharge AISI 316) | power supply: 220V, 50/60Hz | power consumption: 8.7kW | air pressure: 0.7MPa | compressed air consumption: 0.25-0.40m?/min | weight: 1060kg. Please note that our new prices are ofte ...
Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed). Equipped with: quick change former assembly | SIEMENS PLC | WEINVIEW touch screen | eye mark sensor for seal/cutting position | pneumatic sealing unit for end sealing | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 15 cycles/min | bag sizes: L(60-600)x W(200-585)mm (double film pulling L = 1100mm), gusseted stand-up pouches: L(60-600)xW(140-500)xD(100-250)mm (double film pulling L = 1100mm) | suitable film width: 420-1200mm | product contact parts from: AISI 304 (optional for surcharge AISI 316) | power supply: 220V, 50/60Hz | power consumption: 8.2kW | air pressure: 0.7MPa | compressed air consumption: 0.25-0.50m?/min | weight: 1030kg. Please note that our new prices are often ...
Powder filling system for pre-made large bags/sacks with subsequent sealing and/or sewing of the bag/sack. The system includes product feed (screw conveyor), screw feeder with weight feedback, conveyor belts to feed to the heat sealing machine and to the sewing machine. The pre-made bags are manually clamped into the pneumatic clamp support by hand. The product is dosed and filled into the bag. Then it is manually guided by conveyor belt to the heat-sealing or sewing module and sealed or sewn. - Specifications auger filler: weight range: 10-50kg (when changing the dosing screw) | accuracy: +/-0,5% | max. speed of the machine in neutral: 8 cycles/min | capacity of storage hopper: 100L | power: 380V, 50Hz, 3kW | stainless steel version AISI 304 | machine dimensions: L1150xW1000xH2550mm | weight: 450kg. Specifications screw conveyor: Capacity depending on the product: up to 5m?/h | capacity ...
Fully automatic vertical system: automatic weighing, automatic bag feeding, bag opening, filling, shifting and output. Guiding into automatic bag sewing machine where it is sewed. Completely unmanned packaging process. Easy touch screen operation, quick format change. - Specifications: measuring range: 10-50kg | packaging material: hard plastic woven bags | max. speed of the machine in neutral: 12 cycles/minute | compressed air: 6bar, 0.6m? | machine weight: 1.600kg | power supply: 5kW, 380V. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
maximum number of results exceeded
please refine your search
