127,266 used machines on RESALE, but how to find them? Machine Search
Lift table work table HANEU Make HANEU Transporte Solingen Type HAT 500 Machine No. 235423 Year of manufacture 1996 Load capacity 500 kg Platform size 1150 mm x 610 mm Lifting height 700 mm Video test run
sheet width: - plate thickness: - plate length: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter:500 mm turning length:1000 mm weight of the machine ca.:7,3 t dimensions of the machine ca.:6,5 x 4,45 x 2,21 m
turning diameter:500 mm turning diameter over bed:500 mm turning dia. over base-slide:290 mm centre distance:1000 mm centre height:250 mm z-travel:1350 mm speeds:10 - 3000 U/min
weight of the machine ca.:150 kg dimensions of the machine ca.:1200 x 600 x 800 mm
cutting range for steel to:20 mm total power requirement:3~ 220 / 380 V weight of the machine ca.:100 kg dimensions of the machine ca.:500 x 750 x 1000 mm
Refer to code 1152 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,3 x 0,65 x 0,6 m longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
material width:500 mm material thickness:0,2 - 3,8 mm feed length:0 - 9999,9 mm number of rolls:2 material cross-cut:128 mm² speed:60 m/min power requirement:2,0 kW dimensions (WxDxH):1,2 x 1,3 x 1,5 m roll feed:Servo control:Siemens S 7, modification 2002
Refer to code 1153 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
max. format 49 x 65 cm Year of construction 2000 Flat pile feeder with suction head 4 fold pockets in the parallel fold section 1 folding blade in the cross-fold section 1 more fold pocket after the 1st cross break Shed display Price on request. We supply and install worldwide.
weight max.: 5,0 t workpiece diameter: 303 x 2438 mm feed speeds infinitely variable: 0 - 1745 mm/min gear diameter: 305 mm gear width: 100 mm total power requirement: 0,5 kW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,5 x 1,05 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Overview This machine was built in 2006 by Italian manufacturer Gamapck. The machine is in good production condition, already dismantled and stored in a warehouse. Techn. Details Capacity: Up to 45 packs / minute on single lane Last production was 16,000 bph (six packs) Bottles formats: PET bottles with shrinkable PE film 12 x 0,33L 6 x 0,50L 6 x 0,33L 24 x 0,50L Machine drive: Siemens S7 Machine equipped with Infeed conveyor & CE control panel Supplied with spare parts
Overview This solo cork capper was manufactured in 2000 by Italian company BERTOLASO. The machine was used for capping glass bottles with corks in a cider production line and is immediately available. Production at the original facility ceased in 2022. Technical data Capacity: From 9,000 bph to 12,000 bph Formats: 75 cl glass bottles Application: Cork caps for cider bottles Scope of Delivery BERTOLASO DELTA 512 S solo capper
This 3-axis RÃDERS RHP 500 vertical machining centre was manufactured in 2007. It features a machining range of 500 mm à 552 mm à 300 mm and a table size of 600 mm à 540 mm. The machine is equipped with a milling spindle that reaches up to 42,000 rpm and has a tool changer with 42 places. If you are looking to get high-quality machining capabilities, consider the RÃDERS RHP 500 machine we have for sale. Contact us for further details.
; Power [PS]: 68; Gross weight [kg]: 1600; Engine: Battery System: LIFePO4
; Gross weight [kg]: 670; Engine: Battery System: LiFePO4; Accessories: Battery, Control Panel, AC output sockets: 2x 32A (1 for parallel), AC Input sockets: 1x 15kW, DC input: 1x 30kW
used
Manufacturer: CMS Model: Avant-1/B-560-TX3/RR with a digital table Year of Manufacture: 2006 Type of Machine: 4-axis CNC machining center with a moving bridge - Moving bridge design with two racks. Fixed table during machining. - Welded steel support frame stabilized by double heat treatment - Mobile bridge supporting a set of two crossed slide carriages for transverse and vertical movement - Travels: o X axis: 5600mm o Y axis: 2050 mm o Z axis: 300 mm - Working and positioning speed: o X axis from 0 to 60 m/min, positioning speed of 60m/min o Y axis from 0 to 100 m/min, positioning speed of 100m/min o Z axis from 0 to 30 m/min, positioning speed of 30m/min - Automatic centralized lubrication - TX3 vertical head with tool changer mounted on Z-TX3/12/L vertical carriage o Head power: 15kw at 18000 rpm o Programmable rotation speed of 1800 to 24000 rpm o HSK63E cone - 2 ...
Name: Heidelberg SM 102-5P3 ID PP-58291 Category 5-Colors Manufacturer Heidelberg Model SM 102-5P3 Year 1996 Color 5 Impression 236 Working Hours - Speed - - Max. size 72x102 cm Min. Size - Condition Good Location Europe Availability Immediately Description • 5 colors • Impression Counter Approx. – 236 million • 2+3 /5-0 Perfector • CPC 1.04 CP Tronic • Alcolor Dampening • Semi Auto Plate Change • Auto Roller Washer • Auto Blanket Washer • Preset Feeder • Technotrans Cooling – Recirculation • Grafix Powder Spray • Steel Plate in Feeder - Delivery • Central Air System – no compressor • Still in production • Available immediately • Located in Europe
Fiber laser cutting machine Type: TruLaser 5030 Fiber Manufacturer: Trumpf Year: 2012 Laser power: 3000 W The machine is also equipped with automation for loading and unloading material in automatic mode. LiftMaster Compact Regularly serviced by TRUMPF branded service Machine in good condition, under power Find more here - / Contact us at -
Interroll Rising falling Incline belt conveyor with leading belt GF 8168 (7278+890)-690-580 RA2364 Technical data: Conveyor length (NL): 8168 mm ( 7278 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 8168 (7278+890) Nominal / outside width in mm: 690 Belt width in mm: 580 Driven: YES Engine type: ...
Pallet racking, as good as new 108 pitches Multiple available. Manufacturer: Jungheinrich Type: B Specifications: 10 stand frames, approx. 4,500 x 1,100 mm 36 supports, approx. 3,600 x K125 mm mm 72 locking pins Shelf load is 1,600 kg (with evenly distributed load). 2.773,11 € net plus 19 % VAT from stock 21698 Harsefeld. Subject to changes and errors. We are a professional provider – invoice with VAT indicated.
Maximum length of the piece: 1100 mm, Minimum length of the piece: 50 mm, Maximum diameter of the piece: 125 mm, Minimum diameter of the piece: 8 mm, Center height of tailstock above guide: 145 mm, Center height of tailstock above carriage: 65 mm, Centering hole taper angle: 60°, Larger diameter of centering hole cone: 50 mm, Diameter of smallest centering hole: 2 mm, Grinding spindle speeds: 45000 / 22 500 / 13 000 rpm, Hollow screw speed: 400 rpm, Stroke of the grinding wheel along the grinding surface: 0.75 - 5 mm, Diameter of grinding wheels: 15, 27, 48 mm, Weight approx.: 460 kg, Dimensions (length x width x height): 850 x 750 x 1850 mm
Key data: 1050 mm, 510 mm, 560 mm
Mazak MTV 515/40N CNC Vertical Machining Center CNC Control: Mazatrol 640M Table size: 1300 x 550 mm Table load: 1500 kg X-axis travel range: 1050 mm Y-axis travel range: 510 mm Z-axis travel range: 560 mm Spindle taper: MAS BT 50 Spindle speed: 25 - 6000 1/min. Magazine capacity: 30 positions Machine weight: 8900 kg If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
Key data: 730 mm, 730 mm, 740 mm
Mazak HC Nexus 5000-ll CNC Horizontal Machining Center CNC Control Mazatrol Matrix Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 KG Travel X-Y-Z axes 730x 730x740 mm Table Indexing 0.001° Spindle taper DIN 69871A-40 Spindle speed 18,000 1/min Spindle motor 35-26 kW Mazgazin capacity 80 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.
Dematic conveyor system Roller conveyors 20370-600-540 RA2369 Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: 1987 Condition: good (used) Conveyor length (NL):20370 mm, 7 elements between 2620 and 3000 mm, Roller width (RB): 540 mm Nominal/outer width (NB): 600 mm Roller width (RB): 540 mm Frame height: 140 mm Overall height including motor: 240 Roller pitch: 62.5 Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.7m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1987 Electric data: 380-415 condition: gut Conveying length in mm: 20370 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5 Driven: ...
Dematic conveyor system Roller conveyors 19500-600-540 RA2370 Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: 1987 Condition: good (used) Conveyor length (NL): 19500mm, 7 elements between 2620 and 3000 mm, Roller width (RB): 540 mm Nominal/outer width (NB): 600 mm Roller width (RB): 540 mm Frame height: 140 mm Overall height including motor: 240 Roller pitch: 62.5 Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.7m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1987 Electric data: 380-415 condition: gut Conveying length in mm: 19500 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5 Driven: ...
Key data: 1800 KW, 2250 kVA, 415 V
Diesel Generator 5 x CAT 3516B 2000 kVA / 50 Hz – 2023 Never Installed Never installed, surplus CAT 3516B skid mounted diesel generating sets. Engine is coupled with 2000 kVA / 415 V / 50 Hz Leroy Sommer DSG 74L1 brushless synchronous alternator with a flexible coupling, and both mounted on a rigid base frame. These units are designed for standby and prime duty. Main engine control panel EMCP, 24V electric starting system. Technical data Engine type CAT 3516B – 16-cylinder, 1500 rpm diesel engine Alternator Leroy Sommer 2000 kVA / 415V / 50Hz Power factor 0.8 Manufacturing year 2023 Operating hours Zero, never installed Number of units available 5 pcs Prime rating 2000 kVA (1600 kW) Stand by rating 2240 kVA (1800 kW) Control system EMCP 4.2
Biomass CHP Boiler Plant – 5.4 MW Thermal and 995 kWe Turbine Capacity A lightly operated, complete biomass CHP boiler plant featuring a 9.5 MW bubbling fluidized bed boiler (BFB), designed for wood-based fuels. The plant includes a back-pressure steam turbine and a heat exchanger for hot water production from back-pressure steam. The plant was built by Estonian Filter Solutions, a company highly experienced in steam boiler plant engineering and EPC contracting. The BFB steam boiler was delivered by Vapor Boilers Finland. The steam turbine was manufactured by Triveni Turbines (India), in combination with a generator and controls from ABB. Other key equipment includes KSB pumps, conveyors from Technobalt AS, and rotary airlock valves from Rotolok UK. The power plant was commissioned in 2013 and operated at partial load until 2015. The control system, developed by Filter Solutio ...
Offer 17500 Spot welding gun Technical data approx.: - Nominal power approx. 100 kVA - Projection approx. 350 mm - Arm spacing approx. 200 mm - Arm diameter approx. 50 mm - Double lifting cylinder type X - Z force at 10 bar approx. 2400 daN - Working stroke approx. 20 mm - Arm spacing approx. 200 mm - Separate control cabinet HARMS + WENDE - Total weight approx. 250 kg
used
weight max. in kg: 5000 kg stroke: 3300 mm fork length: . mm serial number: V27627 engine output: 57 kW duplex lifting frame: The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 400 - 550 mm bore: 90 - 95 mm Various used face plates: Face plate 1 = 500 mm, short taper Din 55027 Gr. 8 = € 530.00 Face plate 2 = 550 mm, short taper Din 55027 Gr. 8 = € 530.00 Face plate 3 Röhm = 400 mm, short taper Din 55027 Gr. 6 = € 470.00 Face plate 4 = 315 mm, short taper Din 55027 Gr. 6 = € 260.00 Jaws can only be adjusted individually via threaded spindles. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1020 mm, 510 mm, 510 mm
Machine Details Stock number 1105-04058 Machine Type Machining Center - Vertical Make DOOSAN DAEWOO Type MYNX 540 Year of construction 2002 Condition Control type: CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time IMMEDIATELY Ex-works freight base Technical details longitudinal 1020 mm landscape 510 mm vertical 625 mm Tool Changer 30 Pos. max. tool length 250 mm max. tool diameter 80 mm max. tool diameter. with a free neighboring box. 130 mm Rapid traverse 30 m/min Machine weight approx. 7 t Drive power 100% ED 15 kW Drive power 40 % ED 13 kW Speed range 8000 1/min Tool holder SK 40 Table surface 1200 x 500 mm Permissible load (centre of the table) 800 kg Information FANUC 21 M B El. Handwheel Conveyor 8000 RPM 30 SPEED ATC BT 40
Key data: 730 mm, 730 mm, 740 mm
Mazak PFH 5800 (10 Pallet) CNC Horizontal Machining Center CNC control Mazatrol 640M Pallet table size 500 x 500 mm Number of pallets 10 Table load 700 kg X-axis travel 730 mm Y-axis travel 730 mm Z-axis travel 740 mm Table indexing 360 x1° Spindle taper CAT 40 Spindle 12,000 1/min Spindle motor 22/15 kW Magazine capacity 80 Required footprint 9850 x 10145 mm If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
SNA-10. 2 Emergency Power Systems - Complete System Manufacturer: Heinkel Aggregatebau GmbH Technical Data: - Heinkel SET HE500/396; 500 kW; 400 V; 722 A; 1500 rpm - IP 20, brushless synchronous machine AEG Rotaduct - 2 units Type DKBH4407/04; 3-phase AC; 280 kW; 400 V/404 A, 50Hz - 1500 rpm; 50Hz; cos φ 0.8; Built: 1991 - Diesel generator by MTU, Diesel tank: 1 unit, capacity: 1425 l - Starter battery; 2 units Hoppeke power HC 125300 - Dry cooler by Alfa Laval; 2 × 6 fans; 793.52 kW; each 50 m³/h - Ventilator: 90460 m³/h; Two-circuit cooler; Rooftop installation Find more here - / Contact us at -
Specifications Cutting width: 4.5 x 40-80 mm Year of Make: 1994 Power connection: 400 V / 7.5 kW Price: on request the safety level DIN 66399: P3 DIN 66399-1 Machine is fully functional after technical supervision. The PREMIUM paint renovation - 470 EUR additional payment If you have any questions, please call us: +48 696 072 985
Favretto 500, Rotary table surface grinding machine, horizontal spindle, dia 500mm, electric elettrico with DRO
used
Manufacturer: Syntegon Model: AFG 5026 Year of Manufacture: 2019 Type of Machine: Filling and Sealing Machine for Vials with Powder Condition: Not used Key Features: - Zoning concept for infeed, filling, outfeed, and drive area - Best accessibility and simplified cleaning procedure - Innovative transport system for continuous and intermittent operations - Vertically rotating mechanism - High output, even with 100% IPC (In-Process Control) - Ideal for wall installation - Optimized Design: - Vertical wall design for best operability - One-side operability for streamlined workflow - Suitable for integration with barrier systems - In-wall installation for space efficiency Find more here - / Contact us at -
Transnorm conveyor belt GF 13750-600-500 RA2061 Technical data: Conveyor length (NL): 13750 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 13750 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zent ...
Inv. Num. : 8242 Type: VC 560 Producer: Spinner Created: 2007 Parameters: Control system: Siemens Work table length: 650 mm Work table width: 480 mm Maximum vertical spindle speed: 6000 1/min X-axis travel: 560 mm Y-axis travel: 400 mm Travel Z axis: 400 mm Cone: SK 40 Number of all tools: 16 pieces Equipment: Cooling
Key data: 2000 kN, 240 g/PS, 45 mm
Arburg 520 C - Allrounder 2000-675 -Injection molding machine - Control: Selogica - Handlebar spacing: 520 x 520 mm - Handlebar extension: 100 mm - Tool installation height: 350 mm - Opening travel: 650 mm - Centering: 125 mm - Core pull: 2 - Screw diameter: 45 mm - Shot weight - HP : 240g - Clamping force: 2000 KN - Operating hours pump: 61908 - Automatic operating hours: 55566 - Working position: Standard
Stock number: 3944 Suction Manufacturer: 3NINE LINA, Type: 500 Oilmist Separator Machines NO.: OLIETAAGE UDSUGER, Specifications: Fence effect 500 m3/hour m/3 Engine power 0.55 Kw Cleaning oil mist (cutting fluid/coolant) Min. / max Grad 5-50 degree C. Height: 840 mm, Width: Dia. 480 mm, Weight: 30 kg
Knapp roller conveyor accumulation 1100-510-450 RA2382 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 1100 mm Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) scope of delivery: without supports and side guides Driven: YES Roll width in mm: 450 Nominal / outside width in mm: 510 Conveying length in mm: 1100 nominal voltage: 24V Engine type: Interroll EC 300 Roll division in mm: 60 Conveyor speed m / s: frei einstellbar bis 1,25m/s Stowag ...
Knapp roller conveyor accumulation 2160-510-450 RA2381 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 2160 mm Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) scope of delivery: without supports and side guides Driven: YES Roll width in mm: 450 Nominal / outside width in mm: 510 nominal voltage: 24V Engine type: Interroll EC 300 Roll division in mm: 60 Conveyor speed m / s: frei einstellbar bis 1,25m/s Jam detection: Lichtschranke Convey ...
Knapp roller conveyor accumulation 12720-510-450 RA2379 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 12720 mm in 7 Elements. Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Roller conveyors Drive: 30mm Belt Height frame: 90 mm Conveyor speed: 0,5m/s Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) scope of delivery: without supports and side guides Driven: YES Roll width in mm: 450 Nominal / outside width in mm: 510 Conveyor speed m / s: 0,5 Roll division in mm: 60 Jam detection: Lichtschranke Construction year: 2022 Engine type: SEW Getriebemotor Conveying length in mm: 12720 Stowage spaces: 23 For individual, expert ...
Knapp roller conveyor 540-510-450 RA2384 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 540 mm Roller diameter: 50 mm Roller distance: 60 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: nominal voltage: 24V angle: 0° condition: Ausstellungsstück Construction year: 2022 Conveying length in mm: 540 Nominal / outside width in mm: 510 Roll width in mm: 540 Roll division in mm: 60 Driven: YES Engine type: Interroll EC 300 Conveyor speed m / s: frei einstellbar bis 1,25m/s scope of delivery: without supports and side guides For individu ...
Weinig Unimat 500 four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Spindle system: 1. Bottom 7.5kw 2.Rights 3.Left 11kw 4.Top 7.5kw 5.Bottom 5.5kw Powercom system Pneumatic clamps divided into 4 sections Feed speed adjustable via inverter Feed drive on gimbals Input table length 1970mm CE Certified
Knapp roller conveyor 570-510-450 RA2383 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: nominal voltage: 24V angle: 0° condition: Ausstellungsstück Construction year: 2022 Conveying length in mm: 570 Nominal / outside width in mm: 510 Roll width in mm: 540 Roll division in mm: 60 Driven: YES Engine type: Interroll EC 300 Conveyor speed m / s: frei einstellbar bis 1,25m/s scope of delivery: without supports and side guides ...
Knapp roller conveyor 600-510-450 RA2385 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 600 mm Roller diameter: 50 mm Roller distance: 60 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: nominal voltage: 24V angle: 0° condition: Ausstellungsstück Construction year: 2022 Conveying length in mm: 600 Nominal / outside width in mm: 510 Roll width in mm: 540 Roll division in mm: 60 Driven: YES Engine type: Interroll EC 300 Conveyor speed m / s: frei einstellbar bis 1,25m/s scope of delivery: without supports and side guides For individu ...
maximum number of results exceeded
please refine your search
