5 mw used for sale

Powder curing furnace 4,500 x 1,900 x 2,000 mm electric 1 Inner dimension length 4,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 2 pcs. 2x 5,700 = 11,400 m³/h 10 electric motors 2 pcs 2x 2.2 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 74 kW 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heater electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is electrically heated 15 Exhaust air 1 pc device for exhaust air ...

table diameter: 500 mm table load: 0,4 t table height: 160 mm total power requirement: 0 kW weight of the machine ca.: 0,18 t dimensions of the machine ca.: 0,70,80,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool holder, tool holder, milling holder, milling tool -Manufacturer: Komet, Mount: SK50 -Type: AB 50x80x60 Ex CELL-0 -Dimensions: 95/90/H185 mm -Weight: 3.7 kg

Pressing pliers, pressing machine, pressing jaws, pressing tool -Manufacturer: Roller, press machine type 5788001 with accessories -Pressing pliers: size M15, M18, M22, M28 -Accessories: see photos -Dimensions case: 510/300/H120 mm -Weight: 11.7 kg

conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: KJ, -Type: KA69 500B -Speed: 8.3 m/min -Belt width: 500 mm -Conveyor length: 11200 mm -Drive: Drum motor, see photo type plate -Transport dimensions: 11200/1170/H230 mm -Weight: kg

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK40 holder -Type: SK40 x 32 x 510 -Shaft: Ø 32 mm -Dimensions: Ø 75 x 670 mm -Weight: 7,4 kg

Core bit, step chisel, core bit for well construction, core drill, core drilling machine, diamond core bit, core bit for well drilling machine -Drill bit: 3 pieces drill holder plus 1 piece extension adapter -Dimensions: see photos -Delivery/Price: complete -Transport dimensions: 250/250/H280 mm -Weight: 27.3 kg

container, granulate container, storage tank, powder container, color powder container -Container: Stainless steel container with castors -Capacity: approx. 540 liters -Number: 12x containers available -Price: per piece -Dimensions: 1080/1000/H1110 mm -Weight: 105 kg/piece

Sensor module, incremental encoder -Manufacturer: Siemens, Sinamics Sensor Module SMC20 from vertical lathe Scherer VDZ 80 DS -Type: 6SL3055-0AA00-5BA1 -Number: 3x module available -Price: per piece -Dimensions: 115/50/H170 mm -Weight: 0.8 kg/piece

servo motor, electric motor, DC motor, stepper motor, stepping motor -Manufacturer: Siemens, servo motor type 1FK7063-5AF71 -Speed: 3000 rpm -Voltage: 263 V -Shaft: Ø 24 x 50 mm -Dimensions: 280/176/H170 mm -Weight: 11.4 kg

servo motor, electric motor, DC motor, stepper motor, stepping motor -Manufacturer: Siemens, servo motor type 1FK7063-5AF71-1FH0 -Speed: 3000 rpm / nmax: 7200 rpm -Voltage: 263 V -Shaft: Ø 24 x 50 mm -Protection class: IP64 -Dimensions: 325/126/H170 mm -Weight: 12.7 kg

hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, traction motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: 0 510 425 307 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 130/90/H120 mm -Weight: 3.4 kg

hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, traction motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: 0 510 325 014 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Number: 2x pumps available -Price: per piece -Dimensions: 125/90/H120 mm -Weight: 3.3 kg/piece

Diaphragm pump, compressed air diaphragm pump, chemical pump, compressed air-operated double diaphragm pump -Manufacturer: Graco, air-operated double diaphragm pump -Type: Husky 515 D51211 -Flow rate: 15 - 60 l/min -Discharge pressure: 7 bar -Total dimensions: 260/200/H270 mm -Weight: 3.8 kg

Vacuum cleaner motor, radial blower for sweeper, radial blower, fan, blower -Manufacturer: SPAL, radial fan from sweeper Hako Hamster 500 E -Type: 008-B37/C-42D -Voltage: 24 V -Connection input: Ø 70 mm -Connection output: 100 x 45 mm -Dimensions: 150/120/H145 mm -Weight: 0.7 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 560 x 6.5 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 120, see photos -Weight: 12 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 540 x 3 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 120, see photos -Weight: 5 kg

Builder: DOPPSTADT Model: AK 550 MEGA Engine: MERCEDES BENZ 317 kW (425 HP) Data: L. 9.200 mm x W. 2.500 mm x H. 2.950 mm (NO DISCHARGE BELT) Year: 1994 Hourly Production: 140 m³/h Shredding System: 36 HAMMER Fuel Tank: 300 L Weight: 21.000 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 560 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 100, see photos -Weight: 11 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 560 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 80, see photos -Weight: 11 kg

saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 525 x 5 mm -Inside: Ø: 80 mm -Bolt circle: Ø 120 x 23 mm -Number of teeth: see photo -Weight: 6 kg

capacity 90 degrees: round: 500 mm capacity 90 degrees: square: 420 mm : 600x400 saw band length: 5320x34x1,1 mm band speed: 15 - 100 m/min table height: 805 mm total power requirement: 3,0 kW weight of the machine ca.: 1,45 t dimensions of the machine ca.: 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload s ...

Year of manufacture 1997 Foil Packing Machine Angle welding machine Manual installation Shrink tunnel Mobile substructure Price on request. We deliver and install worldwide!

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Manufacturer: Arntz, saw blade Ø 520 x 4.5 mm -Inner diameter: 80 mm -Bolt circle: Ø 123 x 23 mm -Number of teeth: see photo -Weight: 6 kg

gear motor, electric motor, electric gear motor -Manufacturer: Watt Drive, gear motor type SUA 506B IA 81N4 -Speed: 13.7 rpm -Engine: Type WAF81N4 0.75 kW -Shaft: Ø 30 x 125 mm -Protection class: IP55 -Dimensions: 480/210/H240 mm -Weight: 37 kg

Transnorm belt curve conveyor right GKF 90°-700-500-IR450 - NEW RA2312 Technical data: Frame width (NB): 700 mm Frame width with Bearing cover and motor: 900 mm belt width (GuB): 500 mm height (BH): 220 mm height with motor (MH): 350 mm Inner radius (IR): 450 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,67m/s Drive: SEW motor motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2020 Optionally available: Supports Sideguides Sideguides Frequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2020 condition: new Nominal / inner radius in mm: 450 Nominal / outside width in mm: 700 Belt width in mm: 500 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: 0,67 scope of d ...

shell end mills, cylindrical milling cutters, milling cutters, shell milling cutters -Manufacturer: WMW, cylindrical milling cutter, shell milling cutter type N -Size: 50 x 100 mm -Inside: Ø 22 mm -Dimensions: Ø 50 x 100 mm -Weight: 0.8 kg

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 590 x 160 mm -Volume flow: m³/h -Dimensions: 790/710/H790 mm -Weight: 104 kg

M. No.: 6386927 Format (cm): 55 Equipment / Additional information: Side tables, safety barriers, 1xreserve knife Hydraulic precision drives for knives and press beams Continuously adjustable pressing pressure with display 99 memory programs with up to 99 steps

Specifications: Max. sheet width: 2500 mm Max. sheet thickness: 8 mm Weight, approx.: 6400 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 500 mm -Type: S1-32/20x500 -Piston rod: Ø 20 mm -Mounting: bolt circle Ø 85 x 8 mm -Dimensions: 710/83/H103 mm -Weight: 5.5 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Festo, standard cylinder type DGW-50-500 -Stroke: 500 mm -Piston: Ø 63 mm -Piston rod: Ø 20 mm / M16 -Max. pressure: 12 bar -Dimensions: Ø 57 x 700 mm -Weight: 5.7 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder -Manufacturer: FMA Pokorny, hydraulic cylinder tie rod cylinder stroke 50 mm -Type: 50030-00-5 -Piston rod: Ø 16 mm -Dimensions: Ø 65 x 340 mm -Weight: 5.6 kg

WITH BASE CABINET Ser. No.: 12075 Book format: 320 x 220 mm (Max. 320 x 300 mm) Cover format: Cover size: 330 x 480 mm (Max. 330 x 680 mm) Book thickness: 2 - 50 mm Cycle speed: up to 300 cycles per hour Heat-up time: 30 - 40 minutes Equipment / Additional information: Adhesive: Planamelt R 1323-2

Dough laminator Dimensions: 2550x1000x1280mm Electric power: 0.75kW Voltage: 220V 50Hz Conveyor belt dimensions: 500x1980mm Distance with adjustable roller: 1-45 mm Weight: 220kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders, lifting power jacks -Manufacturer: Bosch, double-acting hydraulic cylinder, stroke 75 mm -Type: 0 530 314 001 -Piston rod: Ø 20 mm / M14 -Holes: Ø 20 mm -Dimensions: Ø 65 x 300 mm -Weight: 3.0 kg

Key data: 243 KW, 2200 1/min

We offer completely overhauled Scania DC/DI12-54/56A industrial engines in exchange. These engines have been certified by the Scania Service Partner overhauled with test bench certificate.We sell all engines in exchange.We sell for a surcharge even without returning old parts from the factory zeven/Germany. If you have any questions, please contact: MIW GmbH Engine Repair Plant Nord-West-Ring 8 27404 Zeven Geramny Phone:0049(0) 4281-950583 Mail: infoatmiw-zeven.de

Chuck flange, flange mount, lathe chuck flange, driving flange, lathe chuck face plate, chuck flange for power chucks -Manufacturer: Röhm, chuck flange for power chucks, three-jaw chucks, four-jaw chucks, faceplate -Type: 55021/22-6 Ø 210 mm -Bolt circle: Ø 133 mm -Dimensions total Ø 210 x 170 mm -Weight: 12.4 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit -Hydraulic pump: Type 0510 525 311 -Motor: emod 5.5 kW 2870 rpm -Dimensions: 630/320/H280 mm -Weight: 49.1 kg

Tip height: 265 mm Center width: 1500 mm Circumferential Ø: over bed 540 mm Spindle bore: 65 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 9 - 1800 rpm Feeds: longitudinal/flat 0.063-2.24/0.032-1.12 mm/rev Thread pitches: 0.35 - 560 mm Electrical connection: 380 V, 11 kW Space requirement: 4580 x 1250 x 1330 mm Weight: 3200 kg

Balancer, machine balancer, spring balancer, cable extension, weight compensator, reel -Manufacturer: Wampfler, spring balancer type 5X2.4 40801 -Load capacity: 1.8 - 4.5 kg -Cable extension: m -Number: 2x spring balancer available -Price: per piece -Dimensions: 260/230/85 mm -Own weight: 3.4 kg/piece

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: steel cabinet -Width: 545 mm -Depth: 545 mm -Height: 1025 mm -Door: lockable, without lock -Weight: 23 kg

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helmet, running rail helmet rail -Type: Profile 500 -Length: 125 mm -Dimensions: see photos -Quantity: 1x helmet rail available -Dimensions: 125/65/H60 mm -Weight: 0.7 kg

Cutter ALPINA 500 VACUUM After capital renovation. 3-month warranty on parts. All bearings and sealings in this machine are new. General overhaul of the vacuum pump, actuators and hydraulic pump. New electrical cables. New hydraulic cables. New control panel and controls. New set of knives. Delivery time: 4 weeks - now during renovation. 15% prepayment.

faceplate, faceplate chuck, four-jaw chuck, facing chuck -Faceplate: chuck size Ø 500 mm -Mounting: Short taper 8 (Ø 136-139 mm) -Bolt circle: Ø 173 mm -Through hole: Ø mm -Groove width: 20 mm -Dimensions: Ø 500 x 120 mm -Weight: 58 kg

rotary table, rotary indexing table, dividing head, dividing head -Dividing head:Dividing head with three-jaw chuck -Type: unfortunately without type designation -Three-jaw chuck: Ø 137 x 70 mm, inner Ø 37 mm -Spindle bore: Ø 25 mm -Dimensions total: 510/480/H250 mm -Weight: 69 kg

roller conveyor, conveyor track, roller conveyor support, conveyor track support, support -Support: Adjustable support for roller conveyors or similar -Height: 570 to 800 mm -Width: 480 mm -Number: 19x support available -Price: per piece -Dimensions: 475/130/H570 mm -Weight: 7.7 kg/piece

Table dough laminator Ital Form Dimensions: 2350x870x620mm Electrical power: 0.4kW Voltage: 220V 50Hz Distance with adjustable roller: 1-35 mm Weight: 150 kg

Table dough laminator Ital Form Dimensions: 2350x910x650mm Conveyor belt size: 500x1980mm Distance with adjustable roller: 1-40 mm Electrical power: 0.55kW Voltage: 380V 50Hz Weight: 130 kg

Thread cutting machine, pipe thread cutter -Manufacturer: Ridgid, thread cutting machine type 535 -Pipe size: 1/8 to 2 inches -Spindle bore: Ø 64 mm -Operating voltage: 230 volts -Dimensions: 1080/700/H1140 mm -Weight: 128 kg