130,793 used machines on RESALE, but how to find them? Machine Search
Consisting of 25x left, 25x right Auction-ID: A1-40113-510
Alternator does not recharge, weak battery. Auction-ID: A1-40139-51
Stored in working condition. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43538-17040
BMW 530d Touring F11 • 3.0 diesel with 180 kW / 245hp and automatic transmission • First registration 09.07.2010 • Mileage 261,337 km • 2 vehicle keys available see picture • Leather interior in black • Power seats with memory function • Soft-close doors available • Panoramic/glass roof available, function not tested • Navigation available • Automatic climate control available • Rear view camera available • Automatic headlights available • PDC front/rear available • Rear sun blinds available • Electric tailgate available • Multifunction steering wheel available • Vehicle ready to drive • ABS/DSC errors present • Spare part for ABS is included, but must be taught/coded • Possible need for further repair of the ABS system • Driver's seat with heavier wear • Vehicle all around with scratches and signs of wear • Signs of wear ...
max. turning diameter 356 mm Turning length 510 mm Control M 720 BM MAPPS II Circumferential diameter over bed 923 mm Circumferential diameter over carriage 755 mm Standard turning diameter 275 mm Rod diameter max. 65 mm Main spindle: Spindle nose A2-6 Speed range - spindle max. 5,000 min/-1 Drive power - spindle motor 15 / 11 kW Spindle bearing diameter 120 mm Spindle bore 73 mm max. usable rod diameter 65 mm C-axis 0.001 ° Sub-spindle: Spindle nose A2-5 Speed range - spindle max. 6,000 min/-1 Drive power - spindle motor 11 / 7.5 kW Spindle bearing diameter 85 mm Spindle bore 43 mm max. usable rod diameter ( - ) mm C-axis 0.001 ° Travels: Travel of counter spindle B: 624 mm Travel - x 260 mm Travel - z 590 mm Travel - y 100 (+/-50) mm Tool turret: Turret head (x-fold) 12 powered stations 12 pos Shaft diameter 25 mm Shaft diameter for drill rod max. 50 mm Speed range of the ...
Gel Battery Auction-ID: A1-41957-50
closing pressure:6600 kN weight of the machine ca.:45,5 t
screw size:60 mm closing pressure:3500 kN weight of the machine ca.:25,5 t
Brand number: 6151047 max. cutting diameter: approx. 600 mm
Centrifuge with water treatment - Factory No.: 22126799 - Machine ON: 5,144.65 h - Timer switch Drum diameter 382 mm Drum height 250 mm Capacity 40 kg Wall thickness of the drum 13 mm Drum speed 2850 rpm Flow rate 800 l/h Operating voltage 400 V Total power requirement 5.0 kW Machine weight approx. 500 kg Space requirement approx. 1.90 x 0.70 x 1.65 m
Torx, galvanized. Per 120 in box, lot consists of 3x outer box of 24 boxes
" Lot of casting ladles / metal ladles – approx. 500 kg – 4 pieces of batch consisting of 4 casting ladles for molten metals in different designs. Suitable for aluminum, bronze or non-ferrous metal foundries. Equipment • Crane eyes / carrying brackets • Some with inner struts • One pan with lid Condition From stock of a foundry. Sale as shown. Capacity: up to approx. 500 kg Number of pieces: 4 pieces "
Welding turntable with - Footswitch - Tilting/swivelling motorized - Speed infinitely adjustable - 250 amp welding current transmission - Hole in face plate 40mm. Table diameter 550 mm Table load 500 kg Swivel range 135 degrees Tilt adjustment: manual/mechanical motorized Speed max. 5 rpm infinitely variable Table load 50 kg. vertical Total power requirement 0.8 kW Machine weight approx. 245 kg Space requirements approx. 820 x 730 x 710 m Condition: never used / new (5)
Welding turntable with - Large passage 165mm - Footswitch - Tilting motorically - Speed infinitely adjustable - 250 amp welding current transmission documentation in English. Table load 500 kg Table load 250 kg. vertical Table diameter 550 mm Swivel range 135 (-45 - +90) degrees Speed 0 - 5 infinitely variable rpm Connection voltage 230 V Total power requirement 0.8 KW Machine weight approx. 0.255 t Dimensions approx. 0.82 x 0.73 x 0.71 m Condition: never used / new (5)
Strength: 1,50, Total weight: 1174,50Kg, Total sqm: 97,88
Machine number: 32099/90 BE Drive power: 8.5 kW Electrical connection: 380 V, 50 Hz for deburring various elongated components Lengths from 200 mm to approx. 900 mm (without guarantee) incl. extraction
Table dimensions: approx. 190 x 110 mm incl. installed tools
Serial number: 22320321 Travel X-axis: approx. 500 mm Travel Y-axis: approx. 750 mm Travel Z-axis: approx. 300 mm incl. granite measuring plate Plate dimensions: 1200 x 840 mm incl. documentation, calibration ball, touch probe and hardware Reference: Schmidt - Lot 89
Stored in working condition. The buyer must provide his own transport. Elevator available to charge it.
Table surface 600 x 500 Swivel range 110 degrees Height 150mm good condition
Serial number: 46270311 Travel X-axis: approx. 550 mm Travel Y-axis: approx. 500 mm Travel Z-axis: approx. 300 mm incl. granite measuring plate Plate dimensions: 880 x 830 x 160 mm incl. measuring rings and documentation Reference: Hercegfi - Lot 91
Container Rotating Device incl. foot switch and remote control Load capacity 5.0 t Workpiece diameter 303 x 2438 mm Feed speeds infinitely variable 0 - 1745 mm/min Wheel diameter 305 mm Wheel width 100 mm Total power requirement 0.5 kW Machine weight approx. 0.37 t Dimensions approx. 1.5 x 1.05 x 0.7 m Condition: never used / new (5)
Packed per 24 boxes of 50 pieces in outer box. Lot contains 22 boxes
Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available
Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available
Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available
Hydraulic motor PMH MCF55 Nobmjv D Hwrey Ex Ipecu Displacement cc/rev 55 Max output speed rpm 4,300 Max pressure bar: 500 The max output torque: Nm 350 Weight: 25 kg Manufacturer: PMP Industries Part Number: MCL.5502.1 Serial Number: PP0377490 Customer Code / Model: PMH MCF55 Country of Manufacture: Italy 1 piece in stock
500 litre, Stock number: R989, Rapid mixer, stainless steel,, standing on foot console for floor build in., Hydraulic raise/lower function,, hinged lid in the top., Sliding draught outlet in the bottom,, timer function and safety cut off., Ø 1200 mm., Litre: 500, Material: Stainless steel AISI 304
TECNOVA EXTRUSION LINE, for PE PP PC PS ABS, BUFFER SILO, screw conveyor, CRAMMED FEEDING UNIT, extruder with 130 mm. screw, 37 L/D, n.1 degassing pump, 200 Kw.a.c.drive, semi-automatic hydraulic screen changer with 220 mm Ø screens, hydraulic power station, water ring pelletizer, drying centrifuge, vibro-classifier, constructed in 2019, the line is offered AS IS or RECONDITIONED, -----------------------------------------------------------, This line can be integrated with, ENGINE PLAST GRANULATOR (in photos), type BA 1.000.550.3, 75 kw drive, 12 mm screen (or bespoke), blower to scrap silo of extrusion line, installed power - used power in work: about 60-65% : 200
VERTICAL MIXER, 5.000 lt.capacity Total height approx 5.000 mm Max diam. 1,850 mm. Constructed in painted electro- welded carbon steel. Inner auger diam.280 mm. Loading hopper with safety grid and sampling shutter, 600 x 500 mm. Pulley and belt transmission, protected by carters Inspection door with safety limits, Cleaning hinged door on bottom of cone for complete discharging, with safety opening Side discharging pipe to big bag with valve at 1.000 mm from ground Bottom discharging pipe propeller type max level indicator automatic greasing kit 7,5 kw electric motor Complete with control panel. Electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V CE compliance and instruction manual, installed power - used power in work: about 60-65% : 7.5, capacity: 5.000 lt.
maximum number of results exceeded
please refine your search
500 € 
