129,188 used machines on RESALE, but how to find them? Machine Search
Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 2850 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 558 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 500 , Generator Hz: 50 , Generator Volts: 380/415 , Generator Amps: 760/696 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/stamford-hc544d-generator-500k va-used/239, , = More information =, , Empty weight: 3.750 kg, Type number: HC544D Generator 500KVA
Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 342 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 1330 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 850 , Generator Hz: 60 , Generator Volts: 600 , Generator Amps: 117 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/caterpillar-3512-24z-8n-5806-g enerator-850-kva-used/304, , = More information =, , Empty weight: 10.800 kg, Type number: 3512 24Z 8N-5806 Generator 850 K
Engine Brand: Poyaud Diesel, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Working Hours: 2001 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 441 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 500 , Generator Hz: 50 , Generator Volts: 220/380 , Generator Amps: 1375/760 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/poyaud-diesel-b6l85-generator- 500kva-used/42331, , = More information =, , Empty weight: 5.000 kg, Type number: B6L85 GENERATOR 500KVA
Laser Center of Lasag AG TYPE: FLS 542 C Year of Make: 2006 There are 2 systems each for the laser center (2x optics, 2x laser source) There are also the fiber optic cables and the transformer blocks for the laser sources as well as a PC control system. The plant was dismantled and stored in full working order at the end of 2024.
Promens 511SD Tray sealer 2015, stainless frame, tray dimensions 400mm x 300mm, mobile, 1Ph
Key data: 820 mm, 3000 mm
Smooth X Control Max. turning diameter: 820 mm Travel: X/Y/Z/Tailstock: 870/500/3,122/2,990 mm B: -30° to +210° (0.0001°) Main spindle Drive power: 30 kW Max. speed: 3,300 rpm Max. torque: 3,100 Nm Spindle nose A2-11 Spy bore: 104 mm Milling spindle Drive power: 37 kW Milling spindle max. speed: 10,000 rpm Tool magazine 40 tool positions Capto C8 Programmable NC tailstock MK5 - Tailstock forward/back via footswitch - Tailstock extension 150 mm Hydraulic bezel, SMW Autoblok type RX5 - Max. clamping range: 430 mm Automatic opening/closing of the clamping jaws Clamping force regulation high/low (via M-code) 3-jaw chuck Schunk 500 mm Cooling with air through the rotating milling spindle Cooling by the spindle 70 bar Mayfran Concep 2000II Coolant System - Double switching filter - 70 bar high-pressure pump - 3 pressure levels - Hinged belt chip conveyor Maz ...
Properties: Volume 5070 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 3600 mm Height 2500 mm Diameter width 1500 mm Weight 400 kg Material 2B=IIIC ground Surface outside 2B=IIIC ground Description Topsoil: Clapper bottom Downward-swept vent pipe DN 40 with threaded connection DN 50 according to DIN 11851 Threaded weld-on nozzle DN 40 with T-piece and airlock connection DN 50, thread according to DIN 11851 Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 430x320 mm Sample tap DN 15 Ladder hook at the top Downward-swept CIP cable DN 50 Clear drain with angled seat valve with flange with disc valve DN 50 Subsoil: Clapper bottom Remaining drain with forward-drawn outlet surround with flange and angled seat valve DN 50 with sealing cap 3 calotte feet, height-adjustable, with wash ...
Mazatrol Matrix Control Travel X-axis: 630 mm Y-axis: 765 mm Z-axis: 510 mm A-axis: +30°/-120° C-axis: 360° Max. distance from spindle nose to table top edge (table horizontal): 740 mm Min. distance between spindle nose and top of the table (table horizontally): 230 mm Max. distance from spindle nose to table center (vertical): 690 mm Min. distance from spindle nose to table center (vertical): 180 mm Max. table load: 500 kg Max. workpiece diameter: 730 mm Max. workpiece height: 500 mm Pallet Changer – Mazak Palletech System 6-fold pallet changer Pallet size: 500 x 500 mm Milling spindle SK-40 Max. spindle speed: 12,000 rpm Drive power milling spindle: 22Kw Tool magazine Number of tool positions: 120 Other equipment • 5-axis simultaneous machining • Synchronized tapping • Rapid traverse constant angle of inclination when moving 3D coordinate conversio ...
gemotoriseerde X as Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 600 mm Max travel Z-axe: 600 mm Max height workpiece: 600 mm Power on spindle: 3 kW Table size: 900 x 250 mm
Glass machine for small jars approx. 4800 per h output for yoghurt in a jar Format customizable and overhaulable
Interroll roller track 2.17m with drive The Interroll roller track element is in very good condition. Furthermore, the runway has its own drive motor. Series: 5600 Width: 410mm Length: 2175mm Pitch: 75mm Load Capacity: 200kg per meter Drive voltage: 400Volt Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!
New Goedhart LLK.p 22x6x3900x50/50x(2x8)+ Freon evaporator. Please notice that we can deliver this evaporator with 4 suitable fans that have an diameter of 780 mm & the capacity is based on an airflow of 40.000 m³/h. Specifications: Brand: Goedhart Type: LLK.p 22x6x3900x50/50x(2x8) Capacity: 63,5 kW (Based on an airflow of 40.000 m³/h) Refrigerant: Freon Number of fans: 4 Fin spacing: 8 Sizes: 4450x1550x1410 mm (LxWxH) Surface: 338 m² Volume: 101 dm³ Weight: 590 kg
x-travel: 900 mm y-travel: 550 mm z-travel: 500 mm Control: FANUC 31i-b tool change unit: 30 pos. table-size: 1.000 x 500 mm table weight: 700 Kg spindle taper: HSK - A 63 number of spindle speeds: 20.000 U/min/rpm Spindle power: 22 Kw Working hours: 10.816 h Spindle hours: 2.352 h Internal cooling system: Distance between table and spindle: 150/690 mm chip conveyor: kW weight of the machine ca.: 9 t dimensions of the machine ca.: 2.530 x 2.900 x 3.064 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offered is a Röders RXP 500 high-precision milling machine year 2005, approx. 160763h, spindle approx. 100000h incl. HSK-25 high-frequency spindle with 50000rpm, 42-fold chain magazine, HG sensor, high-accuracy option incl. spindle cooling as well as Renishaw probe, machine weight approx. 5500kg. Viewing is possible by arrangement.
For sale is a CNC laser cutting machine from TRUMPF. laser power: approx. 3000W (3kW), working area: X/Y/Z 3000mm/1500mm/115mm. Additionally, a suitable Liftmaster from the year 2015 is offered, which can also be purchased separately.
Operating pressure: 10bar, max. temperature: 40°C, cooling medium: R134A, quantity: approx. 500g, weight: approx. 450kg. An on site inspection is possible.
Lippert belt conveyor GF 3000-650-500 RA1410 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3000 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (UR): Ø = 81 mm Belt: Type SNB-8E Year of construction: 2 ...
Central oil and grease lubrication system, MFE5-BW30 + KFG1-5W2 Vogel, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Central oil and grease lubrication system consists of: 1) Central lubrication (oil) MFE5-BW30-S7+299, Vogel 30L, 0.5L/min., max. 27bar 2) 2 piston pump units (grease lubrication) KFG1-5W2-M+924, 24V DC, Used! The part was purchased from a certified company's spare parts warehouse, is in good condition and fully functional. We have tested the system's pumps: Oil pump test: it delivers immediately. Test of the 2 grease lubrication piston pumps: The agitator starts immediately and grease delivery begins. If you are interested, we would be happy to show you the test on video. The system can be viewed, tested and collected from us at any time. The level sensor on the oil tank may be faulty, which has been tak ...
Central oil and grease lubrication system, MFE5-BW30 + KFG1-5W2 Vogel, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Central oil and grease lubrication system consists of: 1) Central lubrication (oil) MFE5-BW30-SZ, Vogel 30L, 0.5L/min., max. 20bar 2) 2 piston pump units (grease lubrication) KFG1-5W2-M+924, 24V DC, Used! The part was purchased from a certified company's spare parts warehouse, is in good condition and fully functional. We have tested the system's pumps: Oil pump test: it delivers immediately. Test of the 2 grease lubrication piston pumps: The agitator starts immediately and grease delivery begins. If you are interested, we would be happy to show you the test on video. The system can be viewed, tested and collected from us at any time. The level sensor on the oil tank may be faulty, which has been taken i ...
Key data: 900 mm, 5000 mm
Sony Digital read out 2 axis Taper Turning attachment Steady rest 4 pcs 3 jaw chuck selfcentering 4 jaw chuck independent Coolant system
A paper filling system for dispensing packaging paper is available. Speed: 30m/min, grammage: 70g/m²/120g/m². Machine dimensions X/Y/Z: approx. 750mm/500mm/1300mm, weight: approx. 80kg. Documentation available. An on-site inspection is possible. The machines are ready for shipment. The picture is a sample.
Inv. Num. : 4518 Type: JA 500 A Producer: JUNG Created: 1994 Parameters: Control system: Siemens Operating hours: 10662 h Maximum grinding height of the workpiece: 375 mm Maximum spindle speed: 4200 1/min Minimum travel speed longitudinally (X-axis): 24 m/min Maximum travel speed longitudinally (X-axis): 24 m/min Grinding wheel diameter new: 250 mm Spindle power: 7.5 kW Maximum grinding length without grinding wheel extension (X-axis): 600 mm Maximum sanding length: 200 mm Machine height: 1000 mm Machine length: 3700 mm Machine width: 2100 mm Machine weight: 2,500 kg
Key data: 730 mm, 730 mm, 740 mm
CNC Horizontal Machining Center CNC control Mazatrol Matrix Nexus Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 KG Travel X-Y-Z axes 730x 730x740 mm Table Indexing 0.001° Spindle taper CAT 40 Spindle speed 18,000 1/min Spindle motor 30/22 kW Mazgazin capacity 40 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
pallet roller conveyor 580-1040-900 RA2440 Pallet roller conveyor segment, continuous design length: 580 mm Roller width (RB): 900 mm, Steel rolls Nominal/outer width (NB): 1040 mm roller distance / pitch 200 mm Overall height frame: 170/380 mm for pallet weight up to 1000 kg The shown supports are included in delivery. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1998 Electric data: 0,75 kW condition: good (used) Conveying length in mm: 580 Nominal / outside width in mm: 1040 Roll width in mm: 900 Roll division in mm: 200 Driven: YES scope of delivery: including supports without side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns ...
A start-hole drilling machine Madra-EDM is available. Clamping dimensions X/Y: 600mm/400mm, max. workpiece height: 300mm, travel X/Y: 500mm/400mm, travel W: 250mm, travel Z: 0.01mm-380mm, max. electrode length: 400mm, max. workpiece weight: 500kg, drilling diameter range: 0.3mm-3mm. Machine dimensions X/Y/Z: approx. 1300mm/1300mm/2000mm, weight: approx. 1000kg. The electronics of the machine are defective, as the current for the erosion process is not provided. Dokumentation vorhanden. An on-site inspection is possible.
CNC thread and worm grinding machine 5K822B was manufactured in 1990 in the USSR. A major overhaul of the machine was carried out in 2018. The thread grinding machine 5К822В with a wide range of machining capabilities enables a number of complex operations, i.e. grinding of threads and worms, cutting of any type of external and internal threads or milling of keyways. The workpiece is machined using the front and back spindles with mounted grinding wheels of a maximum diameter of 400 mm. In order to achieve the best results, the grinding wheel spindle is mounted on precision hydrodynamic bearings and runs on rolling guides. It is driven by a reliable DC motor with stepless speed adjustment. All this is complemented by the state-of-the-art PRONUM 600 numerical control with its intuitive interface and machining simulation function. All of this makes the 5K822V worm grinding machine an ...
Source: TruPulse 124 Wavelength of the laser light:1064 nm Maximum average power:140 W Minimum pulse output:300 W Maximum pulse output:6 kW Minimum pulse duration:0.3 ms Maximum pulse duration:50 ms Maximum pulse energy:30 years Maximum pulse repetition rate:833 Hz Beam parameter product:16 mm-mradX-axis:450 mm Speed:3000 mm/min Positioning accuracy:± 0.05 mm Repeatability:± 0.02 mmY-axis:300 mm Speed:3000 mm/min Positioning accuracy:± 0.1 mm Repeatability:± 0.02 mm Z-axis:300 mm Speed:3000 mm/min Positioning accuracy:± 0.05 mm Repeatability:± 0.02 mmRotary axis Turntable:120 mm Free inner diameter:45 mm Maximum speed:80 rpm Diameter of three-jaw chuck:80 mm Central passageways:16 mmClamping range, inside:2-71 mm Clamping range, outside:22-69 mm
Offer 25430 Specifications: - Nominal pumping speed 160 m³/h - Vacuum container VE 350 - 160 350 l - Drive 400 V / 4 kW - Space requirement approx. W 2000 x D 600 x H 1250 mm - Weight approx. 250 kg
A Dr. Fritsch segment soldering machine for the automatic soldering of segments (typically diamond segments) onto carrier tools is available. An on-site inspection is possible.
A double mitre saw Emmegi (Pressta Eisele) is available. Saw blade diameter: 500mm, saw heads: 2, saw head swivelling range: 90°-45°, cutting length range: 250mm-5000mm, max. cutting height: 350mm, max. cutting width: 160mm. Machine dimensions X/Y/Z: approx. 5750mm/1250mm/1700mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible.
We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 3500t of clamping force and the relocation of industrial plants throughout Europe. Offered: Krauss Maffei 125-520 C2 injection moulding machine Machine Specifications General information Year of manufacture: 2004 Controls: MC4 Weight: 6000kg Dimensions (L × W × H): 4.5 × 1.5 × 2.2 m Clamping force: 125 t Tool Clamping System: 125 / ... Tool plate dimensions: 745 × 770 mm Ground clearance between columns: 470 × 470 mm Tool height: 300 mm Opening Distance: 600mm Maximum Plate Distance: 900mm Ejector force: 22 kN Ejector stroke: 150 mm Injection Unit: ... / 520 Screw diameter: 45 mm Injection volume: 275cc Injection weight: 250 g Specific Injection Pressure: 1878 bar ...
control: FANUC 18i MB Number of axles: 4 St. x-travel: 710 mm y-travel: 610 mm z-travel: 650 mm b-axis: 0.001 ° size of pallet: 500x500 mm tool piece magazine with: 60 milling spindle: BT40 spindle turning speed - stepless: 15000 U/min chip conveyor: kW misc. accessories: weight of the machine ca.: 15 t dimensions of the machine ca.: 5.1 x 3.7 x 3.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Included: Giusti 500 Litre S/S Fully Reconditioned Used Jacketed Mixer Fully Reconditioned Control Panel all in perfect working condition Rare to the used machinery marketplace, the Giusti 500 Litre S/S Fully Reconditioned Jacketed Mixer originates from a high-profile Pharmaceutical Plant in Europe. Working Description Fully reconditioned Giusti 500 litre stainless steel anchor paddle mixer and built into jacketed hemispherical vessel with powerful 2-speed bottom mounted high shear mixer. The unit has seen a very little use, and it is in overall excellent condition. It is a fully stainless-steel mixer and comes with newly fitted, high efficiency top mounted mixer drive and the anchor paddle features PTFE scrapers for preventing the build-up of a stagnant boundary layer and to keep the heating surfaces free. Additional wave breakers are fac ...
Dimensions (L/W/H): 690x771x790 mm Weight: 130 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1200x1200x1400 mm Weight: 680 kg Total power requirement: 6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1150x1120x1310 mm Weight: 650 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working area: 500x300 mm Capacity: 60 Watt Weight: 100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 720x900x1160 mm Weight: 120 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2500x2170x2080 mm Weight: 4250 kg Total power requirement: 81 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1700x750x1250 mm Weight: 600 kg Total power requirement: 3 kw Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3810x1530x1525 mm Weight: 1650 kg Total power requirement: 24 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 800x847x790 mm Weight: 250 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1685x765x650 mm Weight: 91 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3500x2100x1300 mm Total power requirement: 0 kW Weight: 1200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3000x1200x1240 mm Weight: 850 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 910x1200x850 mm Weight: 400 kg Total power requirement: 18,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1150x1120x1310 mm Weight: 650 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
