5 axis multi used for sale

Used GANDRA TEC 500 + Bag-in-Box filling machine: 3L/ 5L / 10L / 20L Automatic. For automatic hot or cold bottling of fruit and vegetable juices, wines, etc. Supported packaging: 3 l, 5 l, 10 l, 20 l. The bags are introduced automatically from a belt or manually. Vacuum generation and nitrogen injection after pouring are standard. Equipped with a filled bag counter and a liter counter. Filled bags are collected manually in machines. Producer: Gandra Model: TEC 500+ Year of production: 2017 She recently poured NFC apple juice Capacity: Up to 500 3 liter bags per hour • Power supply 400V/50Hz; 2 kW • Air pressure 6 bar • Installed power – 1.5 kW 2 pcs available

Lippert belt conveyor ascending belt GF 4360-550-400 RA1606 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Conveyor length (NL): 4360 mm (leading belt + ascending belt with bend and upper straight) stand width (NB): 550 mm belt width (GuB): 400 mm overall height (BH): 105 mm support feet: optional Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gearmotor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Dri ...

Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: Phoenix Contact power supply Quint Power -Type: Quint-PS-3x400-500AC/24DC/10 -Order No.: 2938617 -Dimension: 130/85/H130 mm -Weight: 1.1 kg

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Kramp, hydraulic unit -Motor: Type EM100LB4-B14-500 3.0 kW / 1400 rpm -Individual components: see photos -Dimensions: 710/350/H340 mm -Weight: 53.1 kg

Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Face plate: Chuck size Ø 560 mm -Bolt circle: Ø 235 mm -Groove width: 22 mm -Through hole: Ø 140 mm -Intake: short taper 11 -Weight: 109 kg

Used line for processing green bean by Femia. New 2007. capacity: 5000 kg/h. The line consists of: 1. Descaler. 2. Rinser. 3. Rod splitter. 4. Rod cutter. 5. Aerator. 6. Vibrating distributor. 7. Bean tip cutters. 4 pcs. 8. Conveyors.

Technical data for the packing table: Manufacturer: Stow Type: Pal Rack NS Basic: Total width: approx. 1,550 mm Total depth: approx. 1,000/400 mm Total height: approx. 2,000 mm Number of levels (1,000 mm deep): 02 pcs. Number of levels ( 400 mm deep): 02 pcs. Working height: approx. 938 mm The scope of delivery includes: 02x Shelf stand, used Material colour: light blue Frame profile: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Stand height: 2,000 mm Stand depth: 1,000/400 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 02x Footplates, new Material color: blue Total width: approx. 100 mm Total depth: approx. 110 mm 08x Shelf trusses, used Material color: orange Truss Type: PNBH0488 Box profile: 80 x 50 mm Clear width: 1,350 mm 16x Locking pins, used Finish: sendzimir g ...

drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, metal cabinet -Tool cabinet: steel cabinet with intermediate shelf -Width: 1055 mm -Depth: 510 mm -Height: 725 mm -Door: lockable, without key -Number: 1x cabinet available -Price: per piece -Weight: 48 kg

Key data: 500 mm, 350 mm, 250 mm

Type: Wire EDM Machine Ident Number: 22604 Category: Wire EDM Machines / EDM Manufacturer: Sodick Model: VZ 500 L Year of construction: 2010 Travel: 500 x 350 x 250 mm [ X x Y x Z ] max. workpiece size X: 960 mm max. workpiece size Y: 670 mm max. workpiece size Z: 245 mm max. workpiece weight: 850 kg with automatic wire threading Cutting in a water bath U/V axes +/- 80 x 80 mm Taper 15° at 120 mm height Control LN2W

Roller conveyor, conveyor track, roller conveyor belt, roller track -Handover: in current condition as seen -Conveyor rollers: 1 piece is missing, see photos -Roller conveyor: not powered -Roll width: 740 mm -Diameter roll: 90 mm -Center distance: 610 mm -Total dimensions: 6020/960/H845 mm -Weight: 400 kg

Variator Pulley, Vario Adjustment Pulley, Vario Belt Pulley, PIV Gear, Vario Gear, Variable Speed Pulley, Variable Pulley, Expansion Pulley, V-Belt Pulley Adjustable -Manufacturer: VEB, Vario belt pulley type E 502.22 -Outer pulley diameter: 220 mm -Inner diameter: 22 mm -Dimensions: Ø220 x 140 mm -Weight: 5.4 kg

Type: Milling Machine/Machining Center Ident Number: 22592 Category: Milling Machines Manufacturer: Exeron Model: HSC 500 Year of construction: 2016 Travel: 620 x 570 x 350 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Spindle mount: HKS 40-E Spindle speed: 42000 rpm max. workpiece weight: 350 kg ITNC 530 Software 30-speed WZ changer Spindle HSK40 Blumlaser Tool Measurement Renishaw Probes Aspirator Oil mist extraction Minimum quantity lubrication

Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, valve amplifier, valve control, prop. amplifier -Manufacturer: Rexroth, Prop. Amplifier -Type: VT 5004 -PCB: VT 3002 -Dimensions: 200/60/H140 mm -Weight: 0.4 kg

Gear, gears, spur gear, spur gear -Manufacturer: PTI, gear, spur gear module 5 18 teeth -Type: M5 Z18 -Shaft holder: I pilot hole Ø 20 mm -Tooth width: 50 mm -Quantity: 2x gear available -Price per piece -Total dimensions: Ø 100 x 75 mm -Weight: 3.0 kg/pc.

Type: Milling Machine/Machining Center Ident Number: 22367 Category: Milling Machines Manufacturer: Mikron Model: HSM 500 Year of construction: 2006 Travel: 500 x 450 x 360 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Control: Heidenhain iTNC 530 Spindle mount: HSK 32 E Spindle speed: 54000 rpm Table size X: 550 mm Table size Y: 450 mm max. workpiece weight: 200 kg Tool changer: 40 speed Conveyor Laser probes for tools Probe PS 32 Infrared / HSK 32 E Minimal lubrication Oil Mist Extraction Device APS Advanced Process System ITC Intelligent Heat Control Mobile handwheel

Technical data for the packing table: Manufacturer: Stow Type: Pal Rack NS Basic: Total width: approx. 1,550 mm Total depth: approx. 1,000/400 mm Total height: approx. 2,000 mm Number of levels (1,000 mm deep): 02 pcs. Number of levels ( 400 mm deep): 02 pcs. Working height: approx. 938 mm The scope of delivery includes: 02x Shelf stand, used Material colour: light blue Frame profile: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Stand height: 2,000 mm Stand depth: 1,000/400 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 02x Footplates, new Material color: blue Total width: approx. 100 mm Total depth: approx. 110 mm 08x Shelf trusses, used Material color: orange Truss Type: PNBH0488 Box profile: 80 x 50 mm Clear width: 1,350 mm 16x Locking pins, used Finish: sendzimi ...

Key data: 1500 kN, 141 g/PS, 35 mm

Arburg 520S-1500-400 (217) General information SKU: (217) Availability: In stock Year of construction: 2008 Brand: Arburg Specifications Spray weight: 141 g Clamping force: 1,500 kN Screw diameter: 35 mm Spray pressure: 2000 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 688 x 688 mm Tool installation height min.: 250 mm Control: Selogica Language: English,German Power: 33.9 kW Hours: 45343 h Weight: 6490 kg Dimensions: 4.9 x 1.7 m Funnel: No Core Train: Yes Euromap: Yes Air Valve: Yes Heating cans: Yes C90fn8e

Marx Transformatorenbau GmbH & Co. KG Transformer Type: DAY 516 Pri: 3x480V/777A Sec: 3x400V /909A 60Hz 630kVA Two Wöhner LTS-3 630A load disconnectors are installed at the tap, each equipped with three Siemens 400A and 630A NH3-gG.

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders, compact cylinders -Manufacturer: Festo, compact cylinder type ADNGF-25-50-PA 554236 -Stroke: 50mm -Piston: Ø 25 mm -Piston rod: Ø 10 mm -Quantity: 1x cylinder available -Dimension: 105/40/H40 mm -Weight 0.3 kg

Specifications: Workspace X axis: 500 mm Y axis: 400 mm Z axis: 300 mm Working spindle Tool holder: ISO 40 Auto. Feeds: 0.2 - 0.6 - 0.12 mm/min Spindle speeds: 20 - 4000 1/min, directly programmable Feed range: X / Y / Z = 1 - 3000 mm/min Rigid table: 700 x 350 mm, 5 T-slots Rigid table: max. load capacity of 250 kg Connection: 400 V Weight, approx.: 1900 kg Machine dimensions, approx.: 2400 x 1850 x 1850 mm Dimensions: 3200 x 4100 mm, height 1920 mm Equipment: - CNC control - Rigid table - Milling head swivels +/- 90° - Hydr. Clamping device - Coolant device - Emergency stop push button

Lippert Belt Conveyor Riser with arch and straight GF 6640-650-500 RA1420 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6640 mm (ascending conveyor 5390mm + arch 500mm + upper straight 750mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection  ...

Key data: 500 , 30

Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3

Sensor, probe, immersion probe, float switch, magnetic switch, magnetic float switch, level switch, magnetic lock switch -Manufacturer: Igema, magnetic lock switch -Type: M 510-60 -Voltage: 6-230V AC / 6-42V DC -Quantity: 2x switches available -Price per piece -Dimensions: 110/50/H170 mm -Weight: 0.4 kg

Servo motor, electric motor, DC motor, stepper motor -Manufacturer: Berger Lahr, stepper motor servo motor -Type: RDM 599/50 -Shaft: Ø 10 x 30 mm -Dimensions: 130/85/H85 mm -Weight: 2.5 kg

Manufacturer: York Type: YCWZ44CBO-50PA Year of construction: 1997 Machine weight: approx. 1700 kg Dimensions of machine approx.: Length: 3050 mm Width: 1100 mm Height: 1620 mm with control cabinet from the conversion of buildings

Key data: 510 mm, 510 mm, 510 mm

Inv. Num. : 7409 Type: ARROW 500 Producer: CINCINNATI MILACRON Created: 1996 Parameters: Control system: ACRAMATIC A 2100 Number of stacking positions: 21 Work table length: 700 mm Work table width: 520 mm Maximum table load (uniform): 350 kg Maximum vertical spindle speed: 6000 1/min X-axis travel: 510 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cone: CAT 40 Machine height: 2650 mm Machine length: 2700 mm Machine width: 2000 mm Machine weight: 3050 kg Equipment: Tool Holder

Hydraulic pump, hydraulic unit, hydraulic container, hydraulic tank -Manufacturer: Safan, hydraulic container from press brake type UC 110-3100 -Level indicator: sight glass -Total dimensions: 1950/540/H485 mm -Weight: 69 kg

New Part Number: 0206 5542 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Printing pad, printing pad for pad printing machine -Manufacturer: Teca-Print, printing pad for pad printing machine -Type: 597 Ø 165 mm -Receptacle: M16 -Quantity: 3x printing pads available -Price per piece -Total dimensions: Ø 165 x 150 mm -Weight: 1.7kg/piece

Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Face plate: chuck size Ø 500 mm -Receptacle: short cone 8 (Ø 136-139 mm) -Hole circle: Ø 172 mm -Through hole: Ø 80 mm -Groove width: 20 mm -Weight: 86 kg

New Part Number: 0291 6480 not reversible ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Steel pipes, flushing pipes -Diameter: 508 mm -Wall thickness: 8.8 mm -Length: 4,400 mm -Weight: 108 kg/m

Roller conveyor, conveyor track, roller conveyor support, conveyor track support, support -Support: Adjustable support for roller conveyors or similar -Height: 535 to 820 mm -Width: 480mm -Quantity: 33x supports available -Price per piece -Transport dimensions: 480/130/H535 mm -Weight: 5.5 kg/pc.

Key data: 1050 mm, 530 mm, 510 mm

Control Mazatrol ... MATRIX 2 Clamping table surface ... 1300x550mm Axis X ... 1050mm Axis Y ... 530mm Axis Z ... 510mm Spindle speed... 10-12000r/min. controlled axes ... 3 cooling... 15bar ISO 40 Max. table load ... 1200kg Magazine slots ... 30 Machine weight ... 7700kg The machine is in good condition, possible to test under electricity.

Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet, trolley -Workshop trolley: stable tool trolley -4 drawers: lockable, see photos for layout -Contents: 25 tool carriers HSK A63/B80 -Total dimensions: 885/555/H995 mm -Weight: 101kg

Vernier caliper, caliper, vernier caliper -Manufacturer: Holex, digital caliper -Art.No.: 41 5528 800 -Measuring range: 0-300 mm -Measurement accuracy: 0.01 mm -Quantity: 1x calipers available -Dimension case: 1060/280/H50 mm -Weight: 3,3 kg.

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, clothes/laundry locker -Steel locker: double-doored, compartment width 30 cm -Width: 600 mm -Depth: 500 mm -Height: 1855 mm -Doors: lockable, without lock -Number: 1x locker available -Weight: 38 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, clothes locker -Steel locker: three-winged, compartment width 30 cm -Width: 900mm -Depth: 500 mm -Height: 1840mm -Doors: lockable, without lock -Number: 1x locker available -Weight: 56 kg

Transnorm conveyor belt GF 11380-600-500 RA2095 Technical data: Conveyor length (NL): 11380 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, SA37/T DRS71M4/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change,13 - 32 m/min Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 11380 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engin ...

CNC controlled three-axis under-table cross-cut saw with additional drilling unit for wood and wood-like materials, but also suitable for sawing aluminium non-ferrous metals and plastics. Closed compact production island, low noise pollution and no chips in the machine environment. Our automatic sawing and drilling machine KA 550 CNC - SAW and DRILL is versatile einsetzbar_ – Only saws in automatic mode and for single cuts - Drilling only - Combines drilling and sawing in a single operation The possibilities to work with the drilling unit include drilling and countersinking, combined drilling + countersinking with a combination tool, drill milling of longitudinal holes – longitudinal holes transversely – rectangular cut-outs. The drill feed speed and the drilling pressure can be sensitively adjusted. Technical data Circular Saw and Drilling Machine KA 550 CNC - SAW an ...

more available DIGI Fully Automatic Stretch Film Packaging Machine Type AW-5600 or AW 4600 Year of construction div. We will be happy to provide you with a package price offer if you accept several machines!

chuck flange, flange holder, lathe chuck flange, driving flange, lathe chuck faceplate -Manufacturer: Röhm, chuck flange for three-jaw chuck, four-jaw chuck, faceplate -Type: 55021/22-6 Ø 220 mm -Bolt circle: Ø 134 mm -Hole: Short taper 6, cone Ø 103 - 106 mm -Dimensions total Ø 220 x 190 mm -Weight: 20.1 kg

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: with support ribs -Length: 510mm -Width: 310mm -Height: 65mm -Plate thickness: 27 mm -Weight: 37.7 kg

Stock number: 3876 WELDING TURNTABLE Manufacturer: ESAB, Type: MLA 500 Machine NO.: 414767 Specifications: Large workpiece weight 500 kg Infinitely variable table rotations. pr/min Horizontal / Vertical Length: 1200 mm, Height: 800 mm, Width: 800 mm, Weight: 500 kg

Key data: 500 kN

Injection moulding machine Arburg 270 D 500-210 with control cabinet, functional, built in 1990, power 20kW, weight 1,850 kg, Clamping force 500 kn

Storage containers, transport storage containers -Storage container: made of stainless steel with 3 compartments, mobile -3 compartments: with container, see photos -Dimensions:1035/520/H640 mm -Weight: 48 kg

Weibert SD 510 Dressing thickness planer including 4-tersa knife shaft Planer width 510mm Dressing table length 2250mm Planer fence 1500 mm 90°-45° Machine Grey Cast Iron Tables 5.5 KW (7.5 HP) 400V Thicknessing table 1050 x 510mm Passage of 250mm Numerical display thickness table Electric height adjustment of the thickness table 2 infeed speeds 6 & 12 m/min Dual folding system of the tables to the rear Weight of 900 kg G&RO-SD510NE-TER

plastic strapping, strapping tape, packaging tape, tensioning tape, plastic tape -Strapping band: plastic strapping band 2 rolls -Type: HM 19-725-500 -Width: 19mm -Length: 500 m -Number: 2 rolls -Price/Delivery: complete -Box dimensions: 310/300/H310 mm -Total weight: 12.8 kg

cutting width: max. 330 mm Cutting height: max. 150 mm Saw blade diameter: 550 mm Motor output: 7,5 kW turning speeds: 2800 U/min Required air-pressure: 6-8 bar work height max.: 900 +- 20 mm Dimensions (L/W/H): 530x869x1217 mm SALVAMAC Legend 550 the semi-automatic chop saw -------------------------------------------------- - Maximum cutting area 220x150/330x50 mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 7.5 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to mini ...

Skinning machine Made of stainless steel Manufacturer: Maja Model: BXA 554 Dimensions: 1250x1050x2000 mm Voltage: 400V 50Hz 3N Electrical power: 1.1 kW Knife width: 554 mm