5 axis multi used for sale

Piston for Idra 3300 multiblock, 419540, D300mm, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: New The part comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and in its original packaging. Piston for Idra 3300 multiblock, Piston dimensions: 1) D 160mm x length 426mm (geschliffene Fläche) 2) D 300mm x length 182mm (6 Nuten für Kolbenringe) 3) D 225mm x length 54mm (1 Rille) Ca. 185kg The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375,  ...

Piston for Idra 1800 multiblock, 428351, D260mm, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: New The part comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and in its original packaging. Piston for Idra 1800 multiblock, Piston dimensions: 1) D 145 mm x length 420 mm (ground surface) 2) D 260 mm x length 153 mm (6 grooves for piston rings) 3) D 200 mm x length 52 mm (1 groove) Approx. 130 kg The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech ...

Multi-blade saw with feed belt, suitable for very precise cutting of low materials. The perfect solution for parquet manufacturers. Technical parameters: Main engine power: 3 / 4 kW Diameter of the shaft: 50 mm Length of the shaft: 800 mm Width of the feed belt: 800 mm Feed motor power: 0.55 kW Feed speed : 4 - 18 m/min Tool diameter: 300 mm Machine on a system of sliding discs for quick tool change and dimensional adjustment. As additional equipment, it is possible to process short pieces of 150 mm in length. Additional equipment: laser for marking the cut

CML moving blade multi-blade model SCA320R-T350 with: - 1 fixed blade + 1 movable blade with motorized positioning - 1 fixed laser + 1 mobile laser, for cutting line display - 350mm belt, useful cutting width 320mm - useful cutting height with movable blade 90mm (120mm without moving blade device) - main engine kW 22 / HP 30 - motorized lifting of the pressor - manual lubrication pump

Wood oven Habomat 20 wood pellets Häussler as good as new Häussler Habomat 20 -Voltage: 230 volts -Frequency: 20 Hz -Current: Ignition phase: 7.3 A Operating: 0.81A -Rated thermal input: 35 kW -Fuel: Wood pellets HP5 -Year of construction: 2016

For sale 3 rack ovens complete with fireplace system

Deck oven Miwe Condo CO 5.1208 Bakery oven Electric -5 floors each 120x80cm -each floor with Miwe FP control -each floor separately controllable -Top and bottom heat can be controlled separately -each floor with separate steam function -with proofing cabinet -with steam capacitor -with exhaust hood -Floor entrance height 17cm Internal height 16cm -Power: 49,1 kW -Year of construction 2010 -External dimensions Width: 150cm Depth without hood: 132cm with hood +40cm Height without hood: 238cm with hood +20cm

Floor oven Friedrich E6 8/6 bakery oven - 6 floors each 80x60 cm - each floor can be controlled separately with bottom and top heat - each floor with separate steam box - each floor with glass viewing glass - with exhaust hood incl. fan -digital control - Floor flaps are made of glass (visible) - Floor entrance height approx. 12.5 cm - Exhaust hood protrudes 22cm at the control - per floor 3,3kw all together 19,8 kW

Tom Chandley Compacta deck oven Serial: 20C18AA02 2020, Stainless three deck oven, HMI touch screen controls for all decks, 15.6Kw, chamber sizes 900mm L x 750mm W x 200mm H, mobile, 3Ph

4x compound slide - Pos.1; Pos.2; Pos.4; Pos.5 4x indipenden feed - Pos.1; Pos.2; Pos.4; Pos.5 threading device 1x threading spindle pick-up spindle broaching device set of cams set of collets bar-loader Cucchi Giovanni (YOM 2004)

A used deck oven Friedrich E/4 6/8 Elektro with 4 levels, proofer and exhaust hood is for sale and immediately available. Floor oven Friedrich E/4 6/8 Electric - 4 floors each 60/80 - Top and bottom heat can be controlled separately -digital control - with proofer - with exhaust hood - mobile on wheels -Floor height 18 cm External dimensions width: 90cm Depth: 125 cm without hood Height: 210cm

Deck oven electric Miwe Condo CO 5.1208 used all-purpose oven stone slabs oven electric from Miwe Model Condo CO 5.1208 from year of construction 2013 tested and cleaned in stock immediately available for sale. The oven is with 5 shelves each 120x80cm with exhaust hood including steam condenser and proofing cabinet. - 5 tiers each 120x80cm - Each floor with Miwe FP control - each floor can be controlled separately - Top and bottom heat separately adjustable - each floor with separate steam function - with proofing cabinet - with steam condenser - with exhaust hood - Floor entrance height 17cm, interior height 16cm - Power: 49.1 kW - Built in 2013 External dimensions Width: 150cm Depth without hood: 132cm with hood +40cm Height without hood: 238cm with hood +20cm

Miwe condo deck oven  Type: CO 3.0806  Specifications: 3 tiers 80×60 cm sheets Stainless steel cladding in black lacquered digital control Year of construction: 2016 with extractor hood  with lower tray for 60x40cm sheets mobile on castors Specifications:  400 / 230V 3/N/PE 50 Hz / 117.3 kW Dimensions:  Height: 210 cm Width: 100 cm Depth: 100 cm

GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmSlide 1Longitudina ...

Heads 14 pieces Capacity max 130 Portions/min. Dimensions Multihead weigher (L x W x H): ± 1.120 x 1.120 x 1.080 mm Portion size: max. 3L Portion size: max. 65 x 65 x 40 mm. Minimum diameter 1.5 x 3 mm. Maximum weight: 80g/piece Control : Bilwinco microprocessor Consumption: 5000 VA IK Max.: 10 KA 50 Hz Power: 3 x 400 V,N, PE Range: 10g – 1000 g Air pressure: 6-7 bar With podium and Z-conveyor: Dimensions: (L x W x H): ± 3.300 x 6.000 x 4.050 mm

- electric stone plate oven for 60x40cm trays - 5 tiers each 60/40cm - Top and bottom heat can be controlled separately -digital control - with exhaust hood - movable on castors - Floor height 14cm Dimensions: Width: 90cm Depth: 95cm without hood Height: 210cm

Deck oven Wachtel Piccolo I-5 DMS 3 Master EM 100 glass - 5 floors each 80x60 - each floor with separate control - Top and bottom heat can be controlled separately - each floor with a separate steam box - Floor entrance height: 14cm - with proofing cabinet - with exhaust hood - Floor entrance height top floor 20cm - Floor entrance height lower 4 floors each 14cm - Year of construction: 12 / 2014 - Electrical connected load: 23.7 kW - Voltage: 400V AC/3Ph/N/PE/50Hz External dimensions approx.: 118cm width 116cm depth without exhaust hood 230cm height

Used deck oven HEIN, type: Universal -in bakery condition- - Deck oven with 4 shelves - 12m² baking surface - Analogue control - Extractor hood with fan - Condition: good, technically tested The oven is in good bakery condition and is ready for immediate use.

Edur multi-stage centrifugal pump, 15 cbm p.h., 7.5 bar, LBU404C120L Flow rate: 15 cbm/h Head/pressure: 75 m / 7.5 bar RPM: 2,900 KW / voltage: 4.4 / 400 V, motor 7.5 KW Suction side / discharge side: DN 65 flange 180 mm (flange with milk thread connection DN 65) / DN 40 flange 150 mm Type: Stationary, pump head in stainless steel, for liquids, Bauj. 2006 L 780 mm, W 290 mm, H 350 mm Type: LBU404C120L Manuf.: Edur-Pumpenfabrik Product number: 2023002

Roller Wacker WHK 90 L, self-propelled hydraulic articulated roller, hydrostatic drive, 2 cyl. Lombardini diesel engine, air-cooled, 10 kw/14 hp, hydraulic articulated steering, vibration compression. Working width 850 mm, defective water sprinkling, weight 1,335 kg, mast for rotating warning light. Built in 1987, machine running. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for facility and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping work and disposal, environmental care, engines and more...

Width of the feed carpet 300 mm Max saw blade diameter 350 mm min. cutting length 390 mm variable cutting speed, feed carpet speed adjustable 6-48 m/min Power 25,5 kw 35 hp 35 HP

BMG Polarstar Optima and Fluostar Optima Multimode Microplate Reader Up to 384 wells Fliter wheel 8 Excitation Filter wheel 8 emission Fluorescence intesity -time resolved fluorescence -Absorbance and luminicence POLASRSTAR Fluorescense polarization mode linear and orbital shaking Fluorescence 240-740 nm Absorbance 240-740 nm Fluorescence polarization 380-740 nm Additional 12 more filters

Gerstel / CTC Mutlti Purpose Sampler MPS complete For the LC as well as GC YOC 2014, tray for 98 vials (2ml), gas-tight injection syringes

A centrifugal pump with 10 stages with 160KW electric motor and adjustable base frame is offered. Data of the pump: 128m³/h at head 310m Speed 1430 /rpm P 139KW Year: 05/2006 Electric motor: 160KW 1000V 118A 1,485 rpm

Multipurpose hoist, grab hoist, hoist, assembly hoist, rope hoist, universal rope hoist -Cable with: 1500 kg load capacity -Incl. 1x rope: Ø 11 mm/20 m length with safety hook -Dimensions: 750/530/H160 mm -Weight: 31 kg

Multi-blade saw Paul type K 34 G 2200 Specifications: • Working width (mm): 2200 • Engine power (kW): 22 • Top rollers: with PU rings • Bottom rollers: corded • Saw shaft: included

Profibus single module, PLC controller, multifunction module, radio safety module -Manufacturer: Dold, wireless security module -Type: BI5910.03/00MF9 -Accessories: without antenna -Dimensions: 130/70/H85 mm -Weight: 0.5 kg

Multi-purpose hoist, grab hoist -Load capacity: max. 1200 kg -for: rope Ø 10 mm -Quantity: 1 piece available -Dimensions: 640/150/H370 mm -Weight: 18 kg

Multi-spindle head, multi-spindle drill head, drilling gear -Multispindle head -Spindles: 4 -Socket: Ø 20 x 30 mm -Dimensions: Ø 120/165 mm -Weight: 2.2 kg

Multi-spindle head, multi-spindle drill head, drilling gear -Multispindle head -Spindles: 7 -Socket: Ø 20 x 30 mm -Number: 2x built-in drill -Dimensions: Ø 120/290 mm -Weight: 2.2 kg

Multi-spindle head, multi-spindle drill head, drilling gear -Piece multi-spindle head: 3 -Spindles: 2, 3 4 -Socket: Ø 20 x 28 mm -Price: complete -Dimension: see pictures -Weight: 7 kg

Multipurpose hoist, grab hoist, hoist, assembly hoist, rope hoist, universal rope hoist -Manufacturer: Greifzug -Cable with: 3000 kg load capacity -Number: 2x available -Price: per piece -Dimensions: 690/140/H370 mm -Weight: 28 kg

Maka V250 - Multi-blade saw Product name: Multi-blade saw Type: V250 Manafacture: Maka Machine number: 31209 Year of construction: 2010 Condition: used, revised and checked Technical details: - max. cutting thickness: 110 mm - Width of the transport carpet: 250 mm - min. length workpiece: 280 mm (with a special wooden pressure shoe - 1x available as a sample) - Length of the workpieces to be machined: 560 mm - Feed speed of the transport carpet: 0-36 m/min - Max. throughput width: 680 mm - Height of the work table from the floor: 780 mm - Diameter of the suction opening: 250 mm - Weight: approx. 1,700 kg Engine data: - Total power: 18 kW - Voltage: 400 V - Current: 34 A - Speed: 2,930 / 3,515 rpm Machine dimensions/set-up dimensions (L x W x H): 2,750 x 1,790 x 1,850 mm - Number of packaging units: 1 - Weight: approx. 1,700 kg standard accessory: - 1 pie ...

Multipurpose hoist, grab hoist, hoist, assembly hoist, rope hoist, universal rope hoist -Manufacturer: Greifzug -Cable with: 3000 kg load capacity -Weight: 29 kg

Multiple limit switches, buttons, limit switches -Type: BNS519-B5D16-100-1 -Price: per piece -Number: 2x available -Dimensions: 170/120/H107 mm -Weight: 2.9 kg

Multifunctional punch, punch press, hole punch, pneumatic hole punch -pneumatically operated -Year of manufacture: 1998

Gearbox two speed 4 Chain Drive

Chain drive for Multivac R230 Two speed

Multi-spindle lathe (8 spindles) max. rod diameter 16 mm Guide tubes 4,000 mm Conveyor

Multifunctional punch, punch press, hole punch, pneumatic hole punch -pneumatically operated

Cutting Height: 120mm Cutting width: 500mm 4 movable saws

Number of spindles 8 Controller Siemens 810D Chuck diameter: 130 mm Max part diameter: 135 mm Total stroke: 125 mm Working length: 100 mm

Multiplexer, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: Homag Homatic -Type: 2-083-02-7921 -Type: 2083027921 -Number: 2x control cards available -Price: per piece -Dimensions: 130/340/H30 mm -Weight: 0.28 kg

Deck oven Wiesheu EBO 3-68 320 Manual (Honeywell) Electric with proofer - Each floor with separate control - Top and bottom heat can be controlled separately - each shelf for 1 tray 60x80cm long or also 2 trays 60x40cm crosswise one behind the other - with proofer - with steam condenser - each floor with steam function - Year of construction 2007 - Each floor 4.85 kW connected load - Total connected load approx. 16.7 kW

Alfa-Laval multistage / centrifugal 3-stage pump YOM 2001 22 KW 2930 RPM Made in Denmark

Multifunctional punch, punch, hole punch, pneumatic hole punch -operated: pneumatic -Year of construction: 1998 -Type: 270164-1

ISHIDA MULTIHEAD WEIGHER MODEL: CCW-RV-214W-16-50-WP-SLD APRIL 2021 SINGLE PHASE POWER VERY GOOD CONDITION TOUCH SCREEN 4 AVAILABLE

Multi-spindle drilling machine make : Burkhard und Weber / Arboga With interchangeable table Dimensions : LxW 800 x 800 Equipped with 10 spindles, drilling diameter 13.5 mm Cam derailleur, automatic and set-up mode. 2 Coolant pumps . Propulsion : electro-hydraulic. Very powerful, it can be powered with 14 active spindles at the same time. become. Total weight: approx. 8.0 tons. (Forklift loading by GEDE possible)

-Pizza oven 2 tiers -Manufacturer: Moretto Forni -Model: PD60.60 -400 volts -8.4 kW -Weight: 111 kg -currently 3 ovens with 2 shelves each available in the warehouse Year of construction: 2013, 2016 and 2018