5 axis milling used for sale

Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg.

Key data: 800 mm

Technical details are on picture. Parts shown by hand not come.

Topper TMV-510 Built in 2008. Travel distances of X = 510 mm, Y = 360 mm, Z = 300 mm. Table surface 600 × 360 mm Controllers Fanuc 0i-MF

A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China.

x-travel: 550 mm y-travel: 400 mm z-travel: 400 mm Control: INGERSOLL ANDRONIC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: 4000 PROCESSING Manufacturer: MAZAK, Type: VCN 510 C Year of Make: 2006 Specifications: Table size 1350 x 550 mm Large table load 1000 kg Longitudinal movement (X) 1050 mm Transverse movement (Y) 510 mm Vertical movement (Z) 510 mm Spindle cone MAS 40 Infinitely variable spindle speeds 12000 rpm Tool changer 30 places Control Fusion 640 Fabr. Operating hours spindle 7419 hours Accessories: Cooling by spindle 15 bar Chip conveyance. Length: 2800 mm, Height: 2800 mm, Width: 2900 mm, Weight: 7100 kg

max. workpiece diameter: 500 mm threading length: 5000 mm max. module: 10 min. module: 2 workpiece dia. over saddle: 250 mm center height over bed: 260 mm workpiece dia. over bed: 500 mm workpiece spindle bore: 102 mm thread pitch: 1 - 800 mm speed of workpiece (milling): 0,0034 - 2,65 U/min feeds - longitudinal: 0,256 - 195 mm/min feeds - rolls: 0,0256 - 5,17 mm/WU hob turning speeds: 45 - 900 U/min electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 8,5 kW weight of the machine ca.: 6,6 t dimensions of the machine ca.: 7,0 x 1,7 x 1,6 m Thread-, Worm-,gear shafts- and Spline Milling Machine with : equipped with: - Thread Milling Head ApGs - Counter Stay - 1 Bush Rest - 2 Steadies - Cabinet with change Gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 350 mm z-travel: 375 mm turning speed range: 63 - 4000 U/min spindle taper ISO: 40 table surface area: 800 360 mm total power requirement: 3 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2 2 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Part Number: 7781 SPECIFICATIONS - Maximum milling height 216mm - Maximum milling depth 65mm - the largest cutter diameter is 250mm - spindle working length 500mm - spindle rotational speed 4600rpm - spindle diameter 40mm - max tool diameter 250mm - worktop length/width 890x400mm - 11kW motor - 2 material clamps – pneumatic - air demand 6-8 bar - diameter of the extraction port 160mm - dimensions l/w/h 1330x1200x1470mm - weight 970kg ADVANTAGES – Polish production – unpainted – used milling machine, very good condition Net price: 38900 PLN Net price: 9262 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

x-travel: 400 mm y-travel: 400 mm z-travel: 300 mm rapid traverse: 1,2 m/min feed range: 5 - 500 mm/min creep feed: 1:100 tool taper: ISO 40 stroke: v60 h70 mm table - universal: ca. 620 x 320 mm table vertical adjustable: 350 mm weight of the machine ca.: 1200 kg dimensions: mm Machine was used in a public facility and is in good condition. Machine can be viewed under power by prior appointment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gemotoriseerde X as Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 600 mm Max travel Z-axe: 600 mm Max height workpiece: 600 mm Power on spindle: 3 kW Table size: 900 x 250 mm

Key data: 500 mm, 400 mm, 400 mm

DECKEL DMU 50T Heidenhain Control LE 412M Year of manufacture 2001 16-speed tool changer Working area 500 x 400 x 400 mm Feeds 5000 mm/min, rapid traverses 12000 m/min Direct displacement measuring system with rotary encoders (axes are displayed on the screen) Spindle speed max. 9000 rpm Rotary table B- and C-axis Coolant treatment El. Handwheel TFT Monitor Very good condition! If you have any questions, please feel free to contact Mr. Zölch directly: Tel. 0174-9119460 A viewing is possible by appointment. Second-hand goods are sold outside the warranty. Bought as seen. No returns.

x-axis: 5060 mm y-axis: 3200 mm z-axis: 1000 mm distance between columns: 2700 mm spindle motor: 22/26 kW spindle turning speed range: 6000 U/min rapid traverse: 15 m/min table-size: 5000 x 2400 mm workpiece weight: 18 t Control: FANUC 31i-MB total power requirement: - kW weight of the machine ca.: 45 t dimensions of the machine ca.: 12,6 x 6,5 x 4,15 m - CNC Control FANUC 31i-MB - Tool Changer 32-fold (BT 50) - 3 axes linear scales - Semi-auto universal head (C axis auto 5 degree indexing) - Extension head - Spindle oil cooler - Air conditioner for electrical cabinet - Hydraulic oil cooler - no coolant thru spindle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: 4022 CNC BED MILLING MACHINE Manufacturer: Ibarmia, Type: ZVH 58LL Machines NO.: 05525, Year of manufacture: 2005 Specifications: Table size 3600x1050 mm Longitudinal movement (X) 3000 mm Transverse movement (Z) 860 mm Vertical movement (Y) 1000 mm Spindle Taper SK50 ISO Spindle speeds 9000 rpm Spindle motor power 25 Kw Tool changer 30 stations Control Heidenhain TNC 530 Fabr. Controlled in 5 Axis Spindle Hours 12060 Hours Accessories: Cooling by spindle 24 bar Chip conveyance. Cooling water system. Electronic handwheel Cloth Probe System Rotary table. 800mm Table rotation (B) 0.001 degrees Very well preserved. Length: 8100mm, Height: 3800mm, Width: 5500mm, Weight: 25400 kg

A CNC drilling and milling center Morbidelli is available. Travel X/Y/Z: 2600mm/800mm/55mm, machine dimensions X/Y/Z: approx. 3400mm/2400mm/2200mm, weight: approx. 3300kg. An on-site inspection is possible. Available from May 2026.

Inv. Num. : 8953 Type: MULTICUT 500i S Producer: MAS Created: 2011 Parameters: Control system: Siemens SINUMERIK 840 D Maximum turning diameter: 690 mm Max. turning length: 1527 mm Maximum milled profile: 486 x 486 mm Maximum spindle speed: 3500 1/min Maximum workpiece weight: 1600 kg Axis X: 640 mm Axis Y: 370 mm Axis Z: 1600 mm Length: 5400 mm Width: 3950 mm Height: 3760 mm Weight: 22000 kg

Manufacturer ZAYER Model 30 KMU-5000 Year 1999 CNC HEIDENHAIN TNC-430PA Table surface 4,700 x 1,200 mm. Strokes (X/Y/Z) 3,400/1,250/2,000 mm. Shaft Outlet (W Axis) 500 mm. ISO-50 Head Cone Main Motor Power 37 kW 45º Automatic Head INCLUDED Head Rotation 45º Automatic Rotation 0.001º/0.001º Head revolutions 45º 3,000 rpm 45º ISO-50 Head Cone Continuous Twist Head INCLUDED Twist head revolutions 3,000 rpm Twist Head Cone ISO-50 Ram with cane INCLUDED Shank diameter 150 mm. ISO-50 Rod Cone Internal and external cooling head 45º and rod INCLUDED External cooling twist head INCLUDED Semi-automatic head pickup INCLUDED Automatic Loading Tools INCLUDED Loader Positions Htas 60 AITEK Pickup Station for 45º head storage and Twist Head INCLUDED Chip Evacuator INCLUDED HEIDENHAIN HR-410 Portable Steering Wheel RENISHAW MP 16+SP2/1 Piece Measurement Probe Motors + ...

x-travel: 4.700 mm y-travel: 1.250 mm z-travel: 1.500 mm control: HEIDENHAIN iTNC 530 clamping table: - surface area: 5.000 x 1.000 mm max. workpiece weight: 10.000 kg T-slot number x size: 7 x 22 Abstand 140 mm Universal Milling Head: _ Swiveling area front/back level: automatisch Indexing: 0,001 x 0,001° stepless Constant Power at 100 % ED: 37 kW Speed range, stepless: 35 - 4.500 min-1 max. torque: 880 Nm tool taper: SK 50 – DIN 69871 internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/240 mm workpiece length: 300 mm weight of tools max.: 25 kg feeds: - X-, Y- and Z-axis, stepless: 6 - 15.000 mm/min rapid in X/Y/Z: 25.000 m/min max. feed force X-Y-Z-axis: 10.000 N total power requirement: kW weight of the machine ca.: 35 t dimensions of the machine ca.: 12,7 x 5,6 x 4,2 m Equipment / Accessories:Hea ...

x-travel: 500 mm y-travel: 350 mm z-travel: 375 mm digital readout: AKTIV - Digitalanzeige turning speed range: 63 - 4000 U/min spindle taper ISO: 40 table surface area: 800 360 mm total power requirement: 3 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2 2 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 5000 mm y-axis: 4000 mm z-axis: 1400 mm distance between columns: 3500 mm spindle motor: 22/26 kW spindle turning speed range: 6000 U/min rapid traverse: 15 m/min table-size: 5020 x 3000 mm workpiece weight: 16 t Control: FANUC 0i-iMF distance table - lower edge spindle: 200 - 1600 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m 5 Sided Machining Center equipped with: - CNC Control FANUC 0i-MF (10.4 LCD) - ATC 60-fold (BT 50) - Coolant through Spindle - X/Y/Z axis linear guide way - X/Y linear Scales Heads: -- 90 degree head (auto 5 degree indexing) -- 200mm extension 90 degree head (mounted on table) -- 350mm extension head (mounted on table) - Air conditioner - Oil skimmer - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Sale: Handover in the current condition as seen -Protective cover: damage see photos -Manufacturer: Homag, milling unit from edge banding machine BRANDT KS 25 -Motor: Homag 0.75 kW / 12000 rpm -Voltage: 220V / 200 Hz -Pneumatic cylinder: Bosch -Dimensions: 900/570 / H325 mm -Weight: 44 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 15 mm -Tool: Ø 160 x 3.5 mm -Number: 3x motors available -Price: per piece -Dimensions: 200/85/H70 mm -Weight: 3.3 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Admission: -Tool: Ø 150 mm -Dimensions: 880/260/H300 mm -Weight: 18.5 kg

Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 -Motor: AEG 380V 8 kW 1400/2850 rpm -Dimensions: see photos / technical. drawing -Dimensions: 1700/580/H700 mm -Weight: approx. 525 kg

Double end profiler, edge processing machine, scoring motor, hogger motor, spindle motor, milling motor -Manufacturer: Perske, milling motor for edge processing machines -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Recording shaft: Ø 15 x 17 mm / M12 -Dimensions: 190/70/H85 mm -Weight: 1.8 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type DKNS 502/2 with bracket -Power: 0.15 kW 11160 rpm -Voltage: 133 V / 200 Hz -Mounting shaft: Ø 15 x 15 mm -Saw blade. Ø 140 mm -Dimensions: 260/200/H200 mm -Weight: 4.5 kg.

Speed: 355-1800/min, nominal voltage: 380V, 50Hz, 3 AC, control voltage: 220/24V, protection class: IP54, nominal current: 100A, control: Heidenhain TNC 355, weight: 2.95t, with handwheel, coolant system, hose nozzle, hydraulic/lubrication unit, pressure accumulator/ hydraulic accumulator, solenoid valves, Bosch components and ORSTA directional control valve. An on-site inspection is possible.

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Heidenhain TNC 310 cnc control C and B-axis manual with display swivel rotary table electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 500 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 20-4500 UpM Vorschub / feed 5000 mm/min. Gewicht ca. / weight ca. 2800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 380 mm z-travel: 350 mm tool taper: ISO 40 spindle turning speed range: 63.0 - 4000 U/min feeds: 10 - 1000 mm/min quill stroke: 50.0 mm table load: ca. 250 kg table-size: 800 x 360 mm T-slots: 14H7 - 5/63 mm rapid traverse X-axis: 1.5 m/min rapid traverse Z-axis: 1.5 m/min rapid traverse Y-axis: 1.0 m/min Control: DIGI VRZ 650 Number of working hours: 810 h voltage: 380 V control voltage: 110 V engine output: 8.0 kW weight: 1850 kg dimensions of the machine ca.: 1880 x 1796 x 1840 mm from a training center very little run () operating hours approx. 810 hours Equipment: - robust conv. electro-motorized universal milling machine - HEIDENHAIN digital display incl. control panel swiveling, front right display font 0.005/0.001 mm - Electro-motorized adjustment of all axes (X/Y/Z axis) rapid traverse in all 3x directions Manual adjustment via handwheel also po ...

milling machine, year 1998, CNC 2400. Used machine in good condition. More info & price on IndustrialBuyer.

Universal Tool Milling Machine Fritz Werner Type 5130 Extremely robust and precise universal tool milling machine from the traditional German quality manufacturer Fritz Werner (model 5130) This conventional bracket milling machine impresses with its solid grey cast iron design and maximum reliability. It is ideal for workshops, toolmaking, repair shops, demanding do-it-yourselfers or training institutions. The machine has a swivelling vertical milling head with manual quill feed (perfect for additional drilling work) as well as a mechanical feed gear. An absolute highlight is the retrofitted premium safety spindle protection from Tecno Più Technical data at a glance: Manufacturer: Fritz Werner Werkzeugmaschinen GmbH (Berlin) Type / Model: 5130 (Series 5.130) Type: Conventional universal tool milling machine Tool holder: SK 40 (steep taper with tightening rod) Table d ...

Travel X/Y/Z: 500mm/380mm/350mm, tool holder: SK40, quill stroke: 50mm, speed: 4000rpm, feed: 2m/min, rapid traverse: 4m/min, table dimensions X/Y: 800mm/360mm, max. table load: 250kg. Machine dimensions X/Y/Z: approx. 1650mm/2250mm/1850mm, weight: approx. 1800kg, control: Maho 232. The Y-axis shows a malfunction from a feed rate of 50%. Documentation available. An on-site inspection is possible.

Spindle swivel: Yes -5 to 45Â; Height adjustment: manual/handwheel; Spindle stroke: 142mm; Swivel adjustment: manual / handwheel; Stop adjustment: manual; Altitude display: Scala; Swivel angle indicator: Scala; Milling stop indicator: Scala; Spindle diameter: 30 mm; Spindle length: 140mm; Max. tool diameter: 250mm; Speeds: 3500 / 6000 / 8000 / 10000rpm; Motor power: 5.3 kW; Engine brake: Yes, automatic; Table size: 1000mm x 520mm; Carriage length : 1200mm; Suction connection: 2 x 120 mm; Machine length: approx. 1200 mm; Machine width: approx. 900 mm; Weight:

: 0550 mm : 410 mm : 480 mm : 650x410 mm : BBT 40 : 10.000 U/min Motor Capacity: 7,5/11 kW max. table load: 500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 6 bar table diameter: / mm table load: / t Pneumatic drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL DATA: Milling shaft: Ø 40 x 550 mm Speed: 4400 rpm Table stroke: 500 mm Installed power: 11 kW

We offer the following machine directly on behalf of the owner. It was delivered in 2026, but due to a change in demand, it will not be used. The machine is in its original packaging and unused. 5 - Axis CNC Portal Milling Machine, New Make : HURCO Type : DCX 32-5 Si Year of manufacture : 2025, Delivery 3 / 2026 Control: MAX 5, 2 screens TRAVELS X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal stand: 2,130 mm Distance spindle nose to table: 66 – 966 mm SPINDLE / HEAD Clevis CYTEC Tool holder: HSK63-A Max. speed: 18,000 rpm Power : 63 kW Max. torque: 106 Nm Rapid traverse: 15/15/10 m/min Tool Changer / ATC : 60 - speed EQUIPMENT : - IKZ internal cooling by spindle 40 bar - KNOLL belt filter system - KNOLL chip conveyor - Di ...

turning diameter:500 mm turning length:1000 mm control:Siemens 840 D spindle:42 / 28 kW spindle turning speed - stepless:31 - 4000 1/min max. torque on the spindle:345 Nm c-axis:360000 x 0,001° feeds -stepless-:0 - 10000 mm/min rapid traverse:10000 mm/min turret stations / rotary tool stations:12/12 VDI 40 RPM of rotary tools:2000 1/min diameter of quill:90 mm quill stroke:80 mm tailstock quill taper ISO:SK 30 Tailstock Travel:600 mm Power rotary tools:3,5 kW :22,5 Nm Rotary tool holders:4 ax./ 4 rad. spindle passage:66 mm total power requirement:30 kW weight of the machine ca.:7,5 t dimensions of the machine ca.:8x 3 x 4 m

input cartridge for SelectSet 5000 - all details can be seen on the picture. The cassette is tested and comes from a workingSelectSet. Available on stock

AGFA Laser for SelectSet 5000. The laser is tested and works - can be seen on the picture. We are happy to send you the high-resolution original image, here the laser beam can be seen more clearly. Available now

AGFA knife for SelectSet 5000. Including knife holder and dental equipment. Available now

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: Railway railcars Information and pictures on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange ...

AGFA drive motor of the knife for SelectSet 5000. Including dental equipment. Available now

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

4 + 4 bags Sniffer Output Available: Immediately

Diesel tank, steel tank, fuel oil tank, tank system, storage tank with 50,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. In this example, the tank was painted in ruby red. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours at no extra charge: RAL 6005 - moss green, RAL 5011  ...

Format: 59 x 74 cm<br>Perfection 8/0 - 4/4 Color Pilot Plus Ink Control AIR Center (Rietschle) Technotrans temperation Technotrans Combi cooling device with external capacitor Washing machine device for pressure cylinders Quickstart Low Cover Stabilization Powder (Hitronic) Inline Observer Optiprint Jacket Preparation Color temperation Non-Stop Semiautomat Delivery<><br>Still in operation: Yes<br>Verf Gbar: Immediately

Offer of a high-bay warehouse with approx. 2,500 parking spaces. Shelf stand approx. 6.00 m high All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error are expressly reserved. Price ...

Type: VGL 5000. Double-current mixer in standard steel version with 5,000 l. useful content, cylindrical mixing tank and conical bottom, with vertical middle screw, distribution arm and power line controller, rectangular connector for pocket filter, manhole, lower Screw bearing with air flushing, pneumatic flat slider at the outlet.

AT-Motor Scania Typ=DC12 Pumpe-Düse komplett ohne Anlasser+Lichtmaschine. 1 Jahr Garantie,337KW bei 1.800 U/min.Für Notstrom+BHKW Anwendungen. info@miw-zeven.de