126,702 used machines on RESALE, but how to find them? Machine Search
DUE TO NEW ENGINE THIS VERY WELL FUTILIZED DEUTZ DRIVE ENGINE FOR SALE
Transnorm conveyor belt GF 8500 -600-500 RA2088 Technical data: Conveyor length (NL): 8500 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40DT80N4BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 8500 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zent ...
Plastic protectors, collision protection, bollards, polyamide -Full material -Width: 150 mm -Length: 595 mm Height: 74 mm -Drawing with the pictures -Number: 4x savers available -Price: per piece -Weight: 5.6 kg/piece
SBF grading machine model 3W-586 1100mm with 3 belts: - 1st roller belt D=150mm in 90 shore rubber - 2nd roller belt D=200mm in 65 shore rubber - 3rd roller belt D=200mm in 45 shore rubber - pneumatic on/off of the 3 rollers, from the control panel - Rubber pressure rollers - automatic table positioner, with digital reader - Feed mat in good condition - 2 belt feed speeds - front and rear roller conveyor - total installed power KW 24 , volt 380 - year 1997 , CE standards AVAILABILITY FROM APRIL 2024
Used stainless steel belt press made by Flottweg model B-FRU-500 made in 2010. Capacity 500-2000 kg/h. The press includes pulp pump, circulation pump, wash water screen, pressure pump, juiice pump, stationary juice screen, control panel, piping.
Transnorm angled infeed outfeed rejector inlet roller conveyor 45°/90°-600-500 RA2033 Year of manufacture: 1995 discharge angle: 45° + 45° curve Nominal/external width (NB): 600 mm Useful width (NUB): 500 mm Conveyor speed: 0,68 m/s Roller diameter: 50 mm steel + conical plastic coated rollers Drive: SEW gear motor with brake Electrical data: 0,37 kW, 380-480 V center distance: 75 mm Height: 120 mm, 375 with motor Optionally available: Supports Side guide one-sided and both-sided Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) angle: 45°, 90° Construction year: 1995 nominal voltage: 380-480 V Nominal / outside width in mm: 600 Roll width in mm: 500 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,68 scope of delivery: without supports and side guides For ...
Used vertical stainless steel tank, 5000 L volume. Tank with frame agitator and jacket (cooling-heating).
Used stainless steel, 5000 L volume. Process tub, complete with curd cutting harps. It was used for the production of granular cheese.
Key data: 1500 kN, 487 g/PS
Arburg 520A-1500-800 (207) General information Item number: 207 Availability: In stock Year of construction: 2007 Brand: Arburg Specifications Spray weight: 487 g Clamping force: 1,500 kN Stand: Used Screw diameter: 60 mm Spray pressure: 1390 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 700 x 700 mm Control: Selogica Power: 74 kW Operating hours: 63,600 h Weight: 7300 kg Dimensions: 6 m x 2.4 m Funnel: No
Agilent 5975C inert MSD with GC 6890N Agilent 5975 C inert MSD, Agilent GC 6890 N Pfeiffer Turbomolecular Pump, Electronic Ionization/EI ; GC Injector Split/splitless, EPC, LAN Agilent Backing Pump, Software Agilent MSD Chemstation for Win10
Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Gear pump: for electric forklifts -Bicycle pump type: -with tank and control valve -Drive: 24 V -Dimensions: 285/280/H750 mm -Weight: 38 kg
Planetary stirrer Sinmag Model: SM2-500C sophisticated, robust technology ... Proven many times over! Mixer with simple manual operation Powerful 3-speed gearbox 1 stainless steel boiler 40 liters 1 flat stirrer 1 dough hook 1 broom Boiler Protective Grille / Encroachment Protection Floor-standing machine with boiler stroke DGUV V3 tested Connection 400V, 1.1 kW, 16A-CEE plug NEW Machine with 24 months warranty TOP quality and price in one machine! Your partner with the extra bit of service!
Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30
Drive motor 37kw (can be enlarged to max. 75kw) Rotor diameter 500 mm Width 600 mm 5 knives bevel cut Hinged housing, with 2 stator blades, Inlet opening 500 x 600 mm
Product Identifier: FVB-1, 2400 dpi, Fiery EXP50 RIP, Speed: 50 Pages/Minute, Resolution: 600x600 dpi, Paper Capacity: Dual 2000 Sheet Paper Drawer
Key data: 750 mm, 800 mm, 850 mm
Spindle speed (max.): 15,000 revolutions per minute Spindle speed (min.): 50 revolutions per minute Rapid traverse X-axis: 60 mm/min Rapid traverse Y-axis: 60 mm/min Rapid traverse Z-axis: 60 mm/min Weight: 16,000 kg Equipment: Documentation/Manual Subject to technical error and prior sale
Transnorm conveyor belt GF 2600-600-500 RA2237 Technical data: Conveyor length (NL): 2600 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Support feet: optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor, R17 DT71D4/TH Electrical data: 50Hz V380-500, kW 0.37 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2008 condition: good (used) Conveying length in mm: 2600 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s ...
- Atmospheric pressure - Tanks for the fermentation and storage of wine or beer - Dome 400 mm stainless steel AISI 304 - Nitrogen connection with stainless steel ball valve 3/8" - Cleaning pipe with DIN 32 connection - Cleaning ball Ø 65 mm AISI 316 stainless steel - Level indicator with return flow into the tank - Taster - Bottom conical 30° - Residual drain butterfly valve DIN 25 - Clear drain butterfly valve DIN 25 - Bimetal thermometer in stainless steel -20 °C/+80 °C with 200 mm long shaft - 3 adjustable stainless steel feet - Dimensions: Ø 800 x 1950 mm (h) - Mirror polished inside, marbled outside
turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,3 x 0,6 x 0,65 m Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Paper Cutting Machine EBA 551-06 LT Year of manufacture 2009 Price 4800 Euro FCA Essen
Transnorm conveyor belt GF 2670-600-500 RA2068 Technical data: Conveyor length (NL): 2670 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,67 Drive: SEW gear motor R17 DT71D4/Th Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2670 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s: 0 ...
Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, -Adjustment via trapezoidal thread -Adjustment range: 295 - 530 mm Quantity: 1 piece -Weight: 9 kg
Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 2400-1300-550 RA1147 Type 356.10 year of construction 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. Brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: very good (used) Construction year: 2007 nominal voltage: 230, 380-500V Conveying length in mm: 2400 Nominal / outside width in mm: 1300 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SE ...
Used GANDRA TEC 500 + Bag-in-Box filling machine: 3L/ 5L / 10L / 20L Automatic. For automatic hot or cold bottling of fruit and vegetable juices, wines, etc. Supported packaging: 3 l, 5 l, 10 l, 20 l. The bags are introduced automatically from a belt or manually. Vacuum generation and nitrogen injection after pouring are standard. Equipped with a filled bag counter and a liter counter. Filled bags are collected manually in machines. Producer: Gandra Model: TEC 500+ Year of production: 2017 She recently poured NFC apple juice Capacity: Up to 500 3 liter bags per hour • Power supply 400V/50Hz; 2 kW • Air pressure 6 bar • Installed power – 1.5 kW 2 pcs available
Shredder for green waste, roots, waste wood, reed wood, organic waste, biomass, bark, etc. Equipment: Radio, hydraulic travel drive, overbelt magnet, SPECIAL FEATURE: Both shredding shafts, basket carrier with bio-cutting unit, baskets, tools, large service renewed before 100 hours of operation original Komptech.
Lippert belt conveyor ascending belt GF 4920-550-400 RA1606 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Conveyor length (NL): 4920 mm (leading belt + ascending belt with bend and upper straight) stand width (NB): 550 mm belt width (GuB): 400 mm overall height (BH): 105 mm support feet: optional Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gearmotor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Dri ...
Technical data for the packing table: Manufacturer: Stow Type: Pal Rack NS Basic: Total width: approx. 1,550 mm Total depth: approx. 1,000/400 mm Total height: approx. 2,000 mm Number of levels (1,000 mm deep): 02 pcs. Number of levels ( 400 mm deep): 02 pcs. Working height: approx. 938 mm The scope of delivery includes: 02x Shelf stand, used Material colour: light blue Frame profile: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Stand height: 2,000 mm Stand depth: 1,000/400 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 02x Footplates, new Material color: blue Total width: approx. 100 mm Total depth: approx. 110 mm 08x Shelf trusses, used Material color: orange Truss Type: PNBH0488 Box profile: 80 x 50 mm Clear width: 1,350 mm 16x Locking pins, used Finish: sendzimir g ...
Used line for processing green bean by Femia. New 2007. capacity: 5000 kg/h. The line consists of: 1. Descaler. 2. Rinser. 3. Rod splitter. 4. Rod cutter. 5. Aerator. 6. Vibrating distributor. 7. Bean tip cutters. 4 pcs. 8. Conveyors.
Three-phase motor, electric motor -Power: 40 kW -Speed: 1455 rpm -Shaft: Ø 60 mm -Construction: B3 -Protection class: IP 23 -Dimensions: 860/640/H580 mm -Weight: 390 kg
Three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated -Power: 1.1 - 5.5 kW -Speed: 420 - 2100 rpm -Shaft: Ø 30 mm -Construction: B3 -Protection class: IP 21 -Dimensions: 860/430/H480 mm -Weight: 244 kg
Key data: 500 mm, 350 mm, 250 mm
Type: Wire EDM Machine Ident Number: 22604 Category: Wire EDM Machines / EDM Manufacturer: Sodick Model: VZ 500 L Year of construction: 2010 Travel: 500 x 350 x 250 mm [ X x Y x Z ] max. workpiece size X: 960 mm max. workpiece size Y: 670 mm max. workpiece size Z: 245 mm max. workpiece weight: 850 kg with automatic wire threading Cutting in a water bath U/V axes +/- 80 x 80 mm Taper 15° at 120 mm height Control LN2W
V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -Diameter: 507mm -Total width: 158 mm -Strap: 8 -V-belt width: 17 mm -Taper socket recording: Ø 70 mm (can be changed) -Pelt: balanced -Weight: 61kg -other pulleys in stock
V-belt pulley, belt pulley -Diameter: 570 mm -Total width: 237 mm -Straps: 9 -V-belt width: 22 mm -Take: Ø 90 mm -Pulley: balanced -Weight: 127 kg -other pulleys in stock
Upper support, cross support, cross table, cross slide table -Upper support comes from a Waldrich Coburg portal milling machine type: 12 D 3232-550 HL -Table surface: mm -Travel: x 350 mm/y 220 mm -Dimensions: 1380/1000/H800 mm -Weight: 800 kg
Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Type: S9 581 RF-1/2 -Magnetic valve -Connection: 1/2 inch -Number: 1x available -Price: per piece -Weight: 0.9 kg
Technical data for the packing table: Manufacturer: Stow Type: Pal Rack NS Basic: Total width: approx. 1,550 mm Total depth: approx. 1,000/400 mm Total height: approx. 2,000 mm Number of levels (1,000 mm deep): 02 pcs. Number of levels ( 400 mm deep): 02 pcs. Working height: approx. 938 mm The scope of delivery includes: 02x Shelf stand, used Material colour: light blue Frame profile: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Stand height: 2,000 mm Stand depth: 1,000/400 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 02x Footplates, new Material color: blue Total width: approx. 100 mm Total depth: approx. 110 mm 08x Shelf trusses, used Material color: orange Truss Type: PNBH0488 Box profile: 80 x 50 mm Clear width: 1,350 mm 16x Locking pins, used Finish: sendzimi ...
Pneumatic cylinders, air cylinders, standard cylinders -Stroke travel: 250 mm -Piston diameter: mm -Piston rod: 20 mm -Air inlet and outlet: adjustable -Quantity: 2 pieces available -Price: per piece -Dimensions: 560/182/H160 mm -Weight: 9.5 kg/piece
Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 300 mm -Piston diameter: 100 mm -Piston rod: 20 mm -Air inlet and outlet: adjustable -Number: 2 pieces available -Piece price: 125 euros VAT. -Dimensions: 605/182/H165 mm -Weight: 10 kg
Key data: 1500 kN, 141 g/PS, 35 mm
Arburg 520S-1500-400 (217) General information SKU: (217) Availability: In stock Year of construction: 2008 Brand: Arburg Specifications Spray weight: 141 g Clamping force: 1,500 kN Screw diameter: 35 mm Spray pressure: 2000 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 688 x 688 mm Tool installation height min.: 250 mm Control: Selogica Language: English,German Power: 33.9 kW Hours: 45343 h Weight: 6490 kg Dimensions: 4.9 x 1.7 m Funnel: No Core Train: Yes Euromap: Yes Air Valve: Yes Heating cans: Yes C90fn8e
Marx Transformatorenbau GmbH & Co. KG Transformer Type: DAY 516 Pri: 3x480V/777A Sec: 3x400V /909A 60Hz 630kVA Two Wöhner LTS-3 630A load disconnectors are installed at the tap, each equipped with three Siemens 400A and 630A NH3-gG.
Pneumatic cylinders, air cylinders, standard cylinders -Stroke travel: 160 mm -Piston diameter: 125 mm -Piston rod: 16 mm -Air inlet and outlet: adjustable -Quantity: 2 pieces available Unit price: 95 euros VAT -Dimensions: 140/140/H440 mm -Weight: 8.5 kg
Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: ELCO -Type: H150 5V30A -Number: 1x control cards available -Price: per piece -Dimensions: 220/115/H115 mm -Weight: 2 kg
Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Surface: very good -Width: 500 mm -Length: 800 mm -Height: 180 mm -Plate thickness: 25 mm -with: support ribs -Weight: 90 kg
Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Dimensions: 5545/535/H268 mm -Sheet thickness: 60 mm -Plate: with supporting ribs -Weight: 3000 kg
Electric motor, three-phase motor -Power: 0.8 kW -Speed: 1410 rpm -Shaft: Ø 18 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 270/230/H200 mm -Weight: 16 kg
Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 503 mm -Length: 795 mm -Height: 102 mm -Plate thickness: 20 mm -with: support ribs -Weight: 75 kg
Lippert Belt Conveyor Riser with arch and straight GF 6640-650-500 RA1420 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6640 mm (ascending conveyor 5390mm + arch 500mm + upper straight 750mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection ...
Clamping plate, welding table, welding table, straightening plate, clamping cube, clamping tower, clamping box -Width: 200mm -Length: 503mm -Height: 150mm -Plate thickness: mm -Hole diameter: 26mm -Dimensions: 503/200/H150 mm -Weight: 28kg
Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 15 kW -Speed: 2930 rpm -Total pressure: 400 da Pa -Volume flow: 5000 m³/h -Connection input: Ø 400 mm -Connection output: 380 x 320 mm -Dimensions: 920/760/H775 mm -Weight: 216 kg
Gear motor, electric motor, three-phase motor -Speed: 0.16 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 640/250/H240 mm -Weight: 42 kg
maximum number of results exceeded
please refine your search
