5 axis milling used for sale

Shuffle-mix 500 mixer / aerator Serial: 500-115 2007, Stainless mixer aerator, 500L, mobile frame, 3Ph

Key data: 4 , 12

Air compressor Industrial quality at an affordable price. Fully equipped with: Shamal Compressor Pump (Made in Italy) Two-stage, oil-lubricated pump. Condor Pressure Switches (Made in Germany) With thermal motor protection. Pressure reducer. Also available with 15 bar. The compressor has an oil-lubricated, industrial-grade two-cylinder cast iron pump. The low speed ensures quiet operation. The compressor is equipped with an integrated thermal protection for the electric motor. A pressure regulator and a pressure reducer are also installed. These compressors are often used in the commercial sector. Industrial quality. They are used, for example, where compressed air is needed around the clock. Maintenance accessories are available from stock. All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (a ...

2 Sibre SBH 500/1250/60 Retail sale possible

achine-Details Stock-No. 1105-03801 Type of machine Machining Center - Vertical Make DOOSAN DAEWOO Type DNM 5700 Year of manufacture 2021 Type of control CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time IMMEDIATELY Freight basis Ex works Technical details longitudinal 1020 mm cross 570 mm vertical 510 mm Tool Changer 30 Pos. max. tool length 300 mm max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm Rapid Traverse 36 m/min Weight of the machine approx. 7 t power capacity at 100 % load 11 kW power capacity at 40 % load 12000 kW turning speed range 8000 1/min tool taper BT 40 table surface area 1200 x 500 mm groove width 18 mm Additional information direct measuring system, El. handwheel, internal coolant supply package (chipconveyor, cooling trought the spindle, 12000rpm spindle) SIEMENS 828D CONTROL LIKE NEW ONL ...

Ryobi 522HE year 2008 Impressions 22 mil Semi-Automatic plate change, Technotrans Refrigeration, Automatic Blanket Cylinders & Inking Rollers washing devices Powder spray, Double Sheet & Side lay Detector Numbering and Perforating unit

; Gross weight [kg]: 4830; Engine: Cummins 6ZTAA13-G4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 800

Kaiser Press 50to -Exhibition machine / zero operating hours -Electro-hydraulic drive -Actuation: foot pedals and push buttons on the control panel -Compressive force max.: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width incl. hand crank and electrical unit: 1300 mm -Total height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm lead screw -Usable width – working area inside: max. 750 mm -Usable height – working range: 0 mm to 780 mm -Depth of the frame: 220 mm -Total depth with foot: 535 mm (attachment to the ground possible) -Support depth of the height-adjustable work table (cross beam): 245 mm -Cross beam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the cross beam via hand crank (no manual lifting necessary) -Hydraulic unit can be moved laterally: 300 mm (ball bearing in the upper guide area)  ...

The scope of delivery includes: 01x Steel panel, used Material color: sendzimir galvanized overall width: approx. 520 mm Total depth: approx. 195 mm Height: approx. 22 mm Material thickness: approx. 1.00 mm

The scope of delivery includes: 01x Steel panel, used Material color: sendzimir galvanized overall width: approx. 520 mm Total depth: approx. 295 mm Height: approx. 22 mm Material thickness: approx. 1.00 mm

Basic equipment: Central axle trailer chassis for 80 km/h Brake system with ABS according to EC directive 50 mm EC towing eye, clip-on shoe Tyres 285/65 R 22.5 Permissible total weight 19,000 kg Mercedes-Benz OM 460 LA engine, 375 KW at 2,000 rpm. Euro Mot III B emission standard Load-dependent control of the material feed incl. automatic scraper floor reversing Fuel tank 600 liters Radio remote control complete hydraulic drive hydraulic support legs Separate drive feed roller/scraper floor "TwinDrive" Paintwork RAL 2011 deep orange Condition of the machine The machine is in a technically and visually good condition and ready for use. New diesel engine at 10,310 hours! Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects This is not a binding offer. Subject to prior sale and technical  ...

Arburg April 2014 model 920H 5000-4600 500 ton Can be inspected and seen in production

Man Roland R 504 OB - PLV (4/0 – 2/2) Year: 2007 Impressions: 205 million Premium speed: 18,000 sheets/hour Sheet size: 530 x 740 mm Stock thickness: 0.06 – 0.6 mm Roland Deltamatic dampening system Technotrans combi cooling unit for ink and water Combi Control PPL power plate loading Automatic ink, blanket, and impression cylinder washing device Premium inking system Premium Quick Format Change ColorPilot D densitometry ink measuring and control device integrated into the control desk Measuring head track for strip measurement at the sheet gripper edge or sheet tail edge Quick-change coater with chamber doctor blade system Extended delivery IR dryer Roland Seccomatic Books and manuals included 2 PCS. anilox rollers included

Line SEW Eurodrive NF 085-503 Part No. 08274150 No.0009405 UN : 3x380V IN: 85 C° Connections 35 mm2

Reference No: PP-57520 Category: 5 Colors Manufacturer: Komori Model: GL 540 Year Built: 2011 Number of Colors: 5 Impression Count: Not specified Working Hours: Not specified Speed: 1,600 sheets/hour Maximum Size: 720 × 1030 mm Minimum Size: 360 × 560 mm Condition: Good Location: Europe Availability: Immediately Machine Description 5 Color + Coating Skeleton Cylinder PQC-S Console Control Desk KHS-AL: Waste Reduction System PDCS II Densitometer: Quality Control Preset: Automatic Size Setting Non-Stop Feeder & Delivery Ultrasonic Double Sheet Detector Electromechanical Stream Controls FAPC Fully Automatic Plate Changing Komorimatic Dampening System Coating Unit: Harris & Bruno Doctor Blade System Automatic Ink Roller Washing Device Automatic Impression Cylinder Washing Device Automatic Blanket Washing Device Technotrans Beta C. Combi Refrigeration / Rec ...

Offer 23108 Specifications: - Welding current max. 550 A 60% ED - 420 A 100% ED - Welding current adjustable 50 A - 550 A - 3 coarse steps + 12 fine steps - Separate wire feeder case with between package 4 m - 4 roller wire feeders infinitely adjustable 0.5 - 24 m/min - 2 stroke + 4 stroke - regulation - water-cooled hose package approx. 4 rm - Ground cable -Reducer - Connection 400 V / 64 A - Space requirement approx. W 550 x H 1310 x D 1050 mm - Weight approx. 150 kg

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Iveco FPT Engine: C87 TE1PV/Stage 3A Engine No.: in production Power: 259 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S 4 L1D D41 Gene. No.: C221374934 Generator power: 310 KVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation IG 500 Switch: Generator switch 4 poles with motor drive Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 450 Dimensions of the power unit: Width approx. mm: 1.400  ...

Key data: 400 , 500 , 400

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Scania Engine: DC 13 072 A 02 14 ECU Engine No.: in production Power: 440 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 C Gene. No.: in production Generator power: 500 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built-in Tank: Execution: Base frame tank with drip pan Content / liter: 800 Dimensions of the power unit: Width approx. mm: 1.600 Height approx. mm:  ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Scania Engine: DC 16-320A Engine No.: in production Power: 481 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Diesel Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 D Gene. No.: in production Generator power: 550 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.900 Height approx. mm: 2.550 Leng ...

Screening drums suitable for all common screening machines such as Doppstadt SM 314 / SM414 / SM518 / SM618 / SM620 / SM720 / SM 725 Terra Select T4-T7, Komptech Maxx, Mustang, Nemus , Cribus , Pronar , Terex Neuenhauser and others - Manufactured according to your specifications: - Perforation (also variable within the drum) - Square or round perforation - offset or straight - smallest webs - welded-in spiral - in various material thicknesses - Perforated plates sharp-edged in the highest quality - Perforated plates made of special steel We deliver our drums free of charge. Many models in stock without waiting.

table diameter: 690 mm table load: 500 / 250 Kg turning speeds: 0,5 - 3,2 U/min Torque: Drehen 1200 Nm spindle bore: 100 mm swivelling range: 0 - 90 Grad tilt adjustment: manually/mechanicall: maschinell : Kippen 1500 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with hollow shaft 500kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1950x690x1700 mm Weight: 451 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Top and bottom case sealing / taping machine with average production output up to 1000 boxes per hour / 16 boxes per minute and box transfer speed: ·~22 mt/min ~22 mt/min; side mounted drive arms; handwheel for adjusting height. Comes with outfeed roller conveyor. Suitable for cardboard boxes and cases of following sizes: L: 150mm (min) - max (not set) W: 100mm (min) – 500mm (max) H: 100mm (min) – 500mm (max) Tape width: 25mm to 50mm (max), max foil roll DIA: 360mm, reel DIA: 76mm, fitted with Emergency Stop button. Year: 2011 Machine is in excellent overall condition with little use – originates from and established Pharma production site in Europe. Size: L: 1.800mm x W: 1.200mm x H: 1.600mm; W/T: 300kg; comes with stainless steel roller conveyor (machine size: euro-pallet x H: 1.500mm, W/T: 40kg);

The scope of delivery includes: 01x idler, second choice Application: for roller conveyors Material color: sendzimir galvanized Material: Steel Type designation: MRT-50x1,5.20 Total length: 625 mm Web width: 595 mm Roll Ø: 50 mm Thread: smooth with spring pressure Weight / pcs.: approx. 1,370 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...

Very robust and easy-to-use machine for dividing panel-shaped wood-based materials. - welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - long middle support on optimal Height - Fixation for vertical and horizontal cut - Two scales for adjusting the Cutting width for horizontal cutting - Powerful, low-vibration motor Cutting length horizontal mm : 4.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 5.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 5300x2750 mm

1 center grinding machine Make: Technica Model: 5100-810 Year of construction: 1988 Workpiece diameter: 150 mm Grinding depth: 5.0 mm Workpiece length: 1,100 mm Grinding spindle speed: 45,000 rpm Operating voltage: 380 V Total power requirement: 0.5 kW Machine weight approx.: 490 kg Dimensions approx.: 1,00 x 0,85 x 1,85 m

Mobile container heating system Year of construction 2023 Original price: 178.500,- € gross Boiler Buderus GE615 Power: approx. 511–570 kW Burner Weishaupt WM-L10/3-A Monarch Oil burner (tbsp heating oil) Regulation Buderus Logamatic 5311 Other components Two large heating buffer tanks Chimney outside Hydraulics complete in the container Connection cables for heating network Location of the machine: 76661 Philippsburg The facility can be visited on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.

max. tool diameter: , mm 0: , mm operating pressure: , bar filling amount: 52 l Quicksonic QS 520 ------------------ Ultrasonic cleaning device with lid and work basket Usable dimensions: L 500 x W 400 x H 260 Usable basket dimensions: L 444 x W 364 x H 224 Content: approx. 52 l The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK weight: 25 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DIEFFENBACHER PO 500A hydraulic press was built in 1978 in Germany by J. Dieffenbacher GmbH & Co. The machine has been regularly maintained and upgraded throughout its service life. In 2017, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The seals and electrical system were also replaced. The DIEFFENBACHER PO 500A is the perfect choice for even the most demanding metal forming operations. It enables the execution of such operations as die stamping, punching, calibration of forgings and hot and cold bending. All these machining processes are performed with a high press force of up to 500 tonnes, which, combined with a highly dynamic slider, guarantees the best machining results. The machine is also characterised by a rigid body made of thick steel plates and a ...

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 510 mm -Shot: short taper 8 -Hole circle: Ø 170 mm -Through hole: Ø 93 mm -Groove width: 20 mm -Weight: 60 kg

Heating cabinet Manufacturer: Memmert Type: UM 500 Properties: Electric heating, max. temperature: 220°C Electrical power: 2000 watts, at 230 volts - 50 Hz

Machine type: Pulse arc inverter welding machine Make: Rehm Type Megapuls 500 Attachment no. 228.434 Connection voltage 3 x 400 volts Setting range 10 – 500 amps Duty cycle 45 % d.c. at 500 amps 60% d.c. at 450 amps 100% d.c. at 350 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive Fuse 32 amps Dimensions L x W x H 1,030 x 600 x 1,300 mm Weight 175 kg Special accessories for filter attachment and wheels on the DV box Age approx. 10 years Condition: workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauge ...

12 stations main turret(6 are driven) - 6 stations sub turret - LNS sprint 552 barfeed new in 2010 - Fanuc 21TB Control.

Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor -Design: stable -without: roller conveyor drive motor -Roll width: 557 mm -Conveying length: 680 mm -Diameter roll: 70 mm -Dimensions: 875/700/H125 mm -Weight: 44kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, standard cylinder type DNU-80-570-PPV-A -Stroke distance: 570 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm/M20x1.5 -Dimensions: 785/95/H95 mm -Weight: 7 kg

Electromechanical actuator for valves, valve drive, actuator, servomotor, air damper actuator -Manufacturer: Siemens, air damper actuator -Type: SQM33.511A9 -Dimension box: 190/180/H120 mm -Weight: 1.6 kg

Stainless steel tank, upright with 500 litre volume, operating temperature 20°C, operating pressure 16 bar,

Year: 2004 - technically efficient, ready to work - after full service - contour milling machine (rounded corners)

Sumbel Herald 500; good condition; cleaned and tested; Working width 500mm; suitable for hot or cold glue. Sumbel Herald 500; good condition; cleaned and checked; working width 500mm; used for hot or cold glue.

Three-phase motor, electric motor -Power: 4.0 kW -Speed: 1430 rpm -Shaft: Ø 28 x 65 mm -Construction B3 -Dimensions: 430/300/H265 mm -Weight: 67 kg

Ryobi 524GX L 78 mil Autoplate all wash units Ryobimatic dampening Technotrans Alpha-d Refrigeration System Double Sheet & Side lay Detector Tower coater with Doctor Chamber Blade IR dryer Powder Sprays Grafix Digital Extanded delivery PCS-H PDS-E

Daniels 500ton Upstroking Press Platen 1050mm wide x 1100mm deep Capacity in Tons: 500 Working pressure Lbs: 2950 Daylight between tables: 24"/30" Daylight between platens: 18"/24" Stroke (main ram): 24" Main ram dia. : 22" Side ram dia. : 3 1/2" / 2" 4 columns Return Ram Steam heated platens New light guarding Fast / slow close Complete with pump unit and brand new control panel

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 550 mm -Length extended: 1045 mm -Width: 14 mm/height: 39 mm -Price: per pair (left right) -Number: 3x pairs available -Weight: 2.6 kg/piece