5 axis milling used for sale

x-travel: 22.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: SIEMENS 840 D milling head -swivable: 0,001/0,001 Grad milling head: Universalfräskopf 45° Internal cooling system: 20 bar Chip coveyor: ja Tools changer: 30 pos. coolant: 1.100 l Tool taper: DIN 69871A ISO 50 total power requirement: 45 kW weight of the machine ca.: 68 t The round table shown in the pictures as well as the plate field are not sold with ! urning Speeds 6.000 r.p.m. AutoIndex Head 45 º Head 360.000 Pos. Elbow 360.000 Pos. Main Motor Power 37 Kw. Nº Change Range 2 Ranges Automatic Tool Charger INCLUDED Tools at ATC 30 Coolant Through Tool 20 Bar INCLUDED Soluble Oil Tank with filter paper INCLUDED Head Coolant System + CF Box INCLUDED Longitudinal Chip Conveyor INCLUDED Operator?s Platformd with 2000 mm Vertical movement. INCLUDED Ready for Rotor Translating Table (Regulator + Wires) /IN ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmBar diameter max.65 mmTurning diameter500 mmWork spindle (left)Diametre of spindle nose170h5 mmSpindle noseFlat flange Spindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...

Flush milling machine HolzHer UF 362 with feed HolzHer 3 rolls Width max. 50 mm 2 motors 0.55 kW, 3 x 400 V, 50 Hz Year of construction 1984 Weight approx. 300 kg L x W x H: 120 x 100 x 130 cm The Fraese is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Friedrich Deckel FP 2 LB tool milling machine This universal milling machine FP 2 LB from the well-known German manufacturer Friedrich Deckel in Munich has as a special feature an extremely stable basic body and is designed as a travel column machine i.e. the machine does not lose accuracy should heavy parts (up to 1000 kg) be clamped. Another special feature is the so-called inclined bed of 45 degrees. Thus, after dismantling the universal table, it is possible, especially V-engine blocks with 90-degree cylinder angle (e.B. amerik. V8) directly clamp and process. The long travel distance of 800mm is also an advantage in this case. Lid FP 2 LB universal swivel/tilt table (± 45° / ± 15°) Lid Universal Divider Vice 160 mm Working range: X= 800 mm / Y= 300 mm / Z= 400 mm From 01.07.21 the machines are ready for collection. Dismantling and transport by the buyer.  ...

CNC Bedmilling Machine Make: SACHMAN Model: RP 3 x 1800 mm Year: 1996 ( only 5000 hours ) Control: Heidenhain TNC 407 Table: 2000 x 750 mm Speeds: 22 - 3500 rpm Motor: 15 kW Oil cooled universal TVK millinghead

Machine Details Stock-No. 1105-03435 Type of machine Bed Type Milling Machine - Universal Make LAGUN FBF 1200 Type HEIDENHAIN TNC 335 Year of manufacture 1991 Type of control CNC Storage location HAGUENAU Country of origin SPAIN Delivery time IMMEDIATELY Freight basis EX STOCK Price Technical details x-travel 1100 mm y-travel 600 mm z-travel 600 mm surface area 1200X 550 mm turning speed range: 50-3000 TR/MIN power capacity 20 kW control TNC 355 HEIDENHAIN Additional information CNC CONTROL HEIDENHAIN TNC 355 IN PERFECT WORKING CONDITION

Wanderer ISO 40

LAGUN NG- L 1800 CNC universal milling machine LAGUN Machine Tools S.L.- Spain Control HEIDENHAIN TNC 360 X-axis 2300 mm Y-axis 650 mm Z-axis 600 mm Table 1900 x 550mm Table load 2,5t Spindle speed stepless 50 - 3000 rpm Spindle taper SK 40 Spindle motor 9.5kW Total power 15 kW Feeds -stepless- 0 - 5000 mm/min Rapid traverse 10m/min Tool changer 20 tools Weight ca. 6,5 t Accessories: 3x Vices, about 10 tool holders, touch probe, others

fully functioning used 3 axis milling machine, brand lid, type FP2, with vice, and many accessories.

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaTurning diameter500 mmSwing diameter over guide ways500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% ...

Control: Dialog 11 with new MCP card Travel range: x-800 y-600 z-550 mm Spindle speeds: 18 – 6300 rpm Pinole by hand: 80 mm Recording: SK 40 Feed: 2 to 10000 mm/min Rapid response: 10000 mm/min Weight: approx. 4050 kg With full cab, chip conveyor, electr. Handwheel Installation dimensions: L: With controller and chip conveyor approx. 4200 mm (without conveyor approx. 3200 mm) B: approx. 3800 mm (With space to open door E-cabinet approx. 4600 mm) H: approx. 2400 mm Can be visited under electricity.

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% ...

KIMLA BPF 1530 CNC router was built in 2014 in Poland by POLCOM Przemysław Kimla. The machine, dedicated to both small and medium-sized businesses, is the perfect choice for precision machining of a wide range of materials. All machining processes, i.e. milling, cutting and engraving, are performed on a large vacuum table by a powerful high-speed spindle. X,Y,Z axes are, in turn, driven by reliable digital servo drives that provide the appropriate acceleration and speed in each direction. The BPF 1530 CNC milling machine is offered with an extensive range of equipment, consisting of, among others, a BECKER vacuum pump and a tool correction sensor. The machine has undergone regular maintenance and servicing. During the last service in the second half of 2024, the vanes in the vacuum pump were replaced. It is also possible to purchase an additional new spindle at a net price of 2250 EU ...

Year of construction 2001 Siemens 810D Operating hours 1988 Travel distances 350 x 240 x 340 Spindle speed 20 - 6300 Drive power 6.3/10 KW Total connection power 15 kW Tool holder SK40 Accessories: el. Handwheel Spühlpistole Universal swivel rotary table 400 x 280 mm, Rotation range 360 °, swivel range +105/-15 ° with electronic angle display Coolant device

DECKEL FP4 NC Fraesmaschine Dialog 4 Dialog 4 control, working range 560 x 500 x 450 mm, pinole stroke 80 mm, 18 spindle speeds 31.5 -6300 min, folding head, tool holder SK 40, feed speed 1-4000 mm/min, rapid traw 6000 mm/min, table load 800 kg, weight 2070 kg, total connection value 16 kVA.

X - axis 600 mm Y - axis 450 mm Z - axis: 450 mm B - Axis - 120 / + 45 ° C - Axis 360 ° Spindle speed range 20,000 rpm Spindle drive 18 KW Torque 91 Nm Tool holder 63 SK Pallet size 350 x 350 mm Large pallet load 150 kg Number of tool locations in the magazine 60 Large tool diameter 80 (125) mm large tool length 200 mm Gross tool weight 6 kg Tool change time approx. 3 sec. Feed range m/min Express feed m/min Rapid traverse B - axis 50 rpm Rapid traverse C - axis 140 rpm Machine weight 8100 kg Machine dimensions 6.6 x 4.0 x 2.8 m CNC HEIDENHAIN iTNC 530 Electr. Handwheel Probe BLUM Laser Direct displacement measuring systems 60-speed tool changer NC - Swivel rotary table (Torque) 7-fold pallet changer Spindle coolers SIGMATEC 15 / 900 cbm/h Oil Mist Extraction Internal coolant device 18 - 70 bar Conveyor

PLOT ELECTRONICS SENTINEL N 2160 CNC router was built in 2021 in Poland by PLOT Electronics. This extremely efficient machine is the perfect choice for precision machining of a wide range of materials, i.e. aluminium, plastics and wood. The machining process is performed on a large vacuum table by means of a reliable, high-speed spindle. X,Y,Z axes are in turn driven by reliable servo drives, which provide appropriate acceleration and speed in each direction. All this is complemented by a light, yet rigid design that eliminates any vibrations during even the most intense challenges. The offer price includes extensive equipment, consisting of, among others, a vacuum pump and advanced cncGraF Pro software. The SENTINEL N 2160 CNC milling machine weighs approximately 2000 kg. Technical specifications of the PLOT ELECTRONICS SENTINEL N 2160 milling machine - software: cncGraF Pro - mach ...

CNC Model: Heidenhain CNC Version: ITNC 640 Head Type: Automatic Fourth and Fifth Axis Head Additional technical notes for the head: 0.001° positionable head Tool Mount: ISO 50 Spindle power: 38Kw Number of spindle speeds: 4000 Number of tools: 40 X-axis travel: 4000mm Y-axis travel: 1300mm Z-axis travel: 1500mm Fast feeds linear axes X Y Z: 20m/min Table dimensions: 4100 x 1100mm Table capacity: 12000Kg Guides: roller CNC divider: yes Rotation: Continuous Cutter type: fixed bench Chip conveyor: belt Machine equipment: optical scales :::D DIMENSIONS AND WEIGHT::: Length: 10560mm Width: 4200mm Weight: 26000Kg

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...

KIMLA BPF 2131 CNC router was built in 2014 in Poland by POLCOM Przemysław Kimla. The machine, dedicated to both small and medium-sized businesses, is the perfect choice for precision machining of a wide range of materials. All machining processes, i.e. milling, cutting and engraving, are performed on a large work table by means of a powerful, high-speed spindle. The offer also includes a set of tool holders. The KIMLA CNC milling machine weighs 3100 kg. Technical data of the KIMLA BPF 2131 milling machine - machined materials: mild metals, wood, wood-based materials, plastics, etc. - CNC controller - work table dimensions (L x W): 3100 x 2100 mm - air pressure: 8 bar - power: 14 kW - power supply: 400 V; 50 Hz - weight of the BPF 2131 machine: 3100 kg

Machine Details Warehouse number 1105-03525 Machine type tool milling machine - Universal SIA brand Type 470 Year of construction 2001 Control type CNC Control ANILAM 53000MK Storage location FRANCE Country of origin italy Delivery time immediately Freight base from location Technical details x-travel 750 mm y-travel 450 mm z-travel 500 mm Control ANILAM 53000MK Speed range - spindle 4500 rpm Drive power - Milling spindle 7.5 kW Feed - Fine adjustment 5 ~ 1000 mm/min Rapid traverse X-axis 15 m/min Rapid traverse Z-axis 15 m/min Rapid traverse Y-axis 20 m/min Total power requirement 20 kW Machine weight approx. 3 t Space requirement approx. 3.2 x 2.1 x 2.5 m Accessories Coolant device Information Tool milling machine - Universal WITH ANILAM 5300 MK CNC WITH NEIHGBARER HEAD TABLE 1050 X 500 MM

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range- 5000 rpmDrive power (40% DC)32 kWMax. torque (40% DC)360 NmC-Axis Speed-5000 rpmTorque of C-Axis (holding torque)280 NmT ...

Technical Specifications - Bridgeport Series I Table Size / Work Surface 9" × 49" (≈ 299 mm × 1245 mm) T-slots 3 pieces, spacing 2.5" (≈ 64 mm), groove width 0.625" (≈ 16 mm) Travel X (Transverse) without Power Feed: 36" (≈ 914 mm) with power feed: 33" (≈ 838 mm) Travel Y (Transverse to Feed) 12" (≈ 306 mm) Quill Stroke (Drilling Spindle Stroke) 5" (≈ 127 mm) Knee Lift (Z-Axis of Table) 16" (≈ 406 mm) Ram Adjustment (Head Stem on Ram Slide) 12" (≈ 306 mm) Min. / Max. distance spindle axis to table nose (spindle/table nose distance) min: 2.5" (≈ 64 mm) Max: 18.25" (≈ 463 mm) Min. / Max. distance spindle to column front (minimum/maximum internal width) min: 6.75" (≈ 171 mm) max: 18.75" (≈ 476 mm) Spindle / Quill Spindle Diameter: 1.875" (≈ 48 mm) Quill Diameter: 3.375" (≈ 86 mm) Spindle holder (standard): R-8 Spindle motor / power 30 minute ...

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock With path control MILL PLUS iT Year of Make: 2006 Travel: X 800 Y 800 Z800 Speed range: 0 – 8,000 rpm infinitely variable ( SK 50 ) With the following accessories: NC rotary table 900 mm x 700 mm clamping surface (table load max. 1.4 t) Universal milling head with controlled B axis Universal tool changer with 40 magazine positions as a double gripper ( SK 50 ) Full protection cabin with sliding doors and interior lighting IKZ – 40 bar Conveyor Rotoclear Tool Measurement BLUM Laser 3 D Probe Heidenhain TS 641 Operating mode 3 + 4 Electronic handwheel 3-Piece Height Adjustable Machine Shoes Transport device Operating instructions

Bessler - Wood Milling Machine Speed in 18mm Koskisen Grey consisting of a router table (X-axis), a portal (Y-axis), a Z-axis and a base frame filled with polymer concrete. Mechanics set: consisting of profile guides KPF-S 20 incl. carriage. Ball screw, for the Z-axis. Precision racks, with a gearing quality 8. Profile rails for the installation of limit switches. All sub-elements assembled. Machine feet adjustable. Control set: consisting of planetary gears, with a reduction ratio of 1:5 Stepper motors with 9.2NM, 4A. High-performance power amplifiers with 80V each, a 70V power supply and core transformer, completely pre-assembled in the control cabinet. Sensors for each axis. Protective device CE-compliant due to moving suction device. High-frequency spindle with 2.2KW incl. union nut, frequency converter, mains filter, brake resistor, as well as collet set. 21.5 ...

aschinella details Warehouse number 1105-03375 Machine type Milling machine - Universal CmE brand Type FC 1100 Year of construction 1991 Control type NC Storage location FRANCE Country of origin spain Delivery time immediately Freight base from stock Technical details x-travel 1100 mm y-travel 700 mm z-travel 500 mm Receiving cone of the main spindle 40 SK Motor power 10.6 kW Table clamping surface 1400 x 450 mm Speed 40 - 1800 rpm Dimensions L-W-H 2.4 x 2.15 x 2.1 mm Machine weight approx., 3800 kg Information Equipment: - Heidenhain - Control model TNC 124 - Universal milling head "Huron" design - 2 counter holders for horizontal milling - autom. Tool clamping - Lighting - Central lubrication

I sell a combined pin cutting machine with drill head BALESTRINI I2F 1 swivel table with pneumatic material pressure. Automatic cutting saw from below. Milling head for pin or finger joint production. Drill head for dubel drilling production 3 spindle. Feed automatically. End sensors positioning. Available the same.

Operating hours: 600h Specifications: Travel in X/Y/Z: 450 / 350 / 400 mm Distance from spindle nose table: 230 - 630 mm (horizontal milling spindle) Rapid traverse speed X/Y/Z: 5000 / 5000 / 5000 mm/min Working feed X/Y/Z: 10 - 2000 mm/min infinitely variable Max. feed force in X/Y/Z: 10 / 10 / 15 kN Clamping surface: 800 x 400 mm (rigid angle table) Max. table load: 30 kg (rigid angle table) Vertical milling head: Speed range: 10 - 5000 1/min Power: 10 kW Dimensions (LxWxH), approx.: 1980 x 2030 x 1990 mm Weight, approx.: 2270kg Equipment: - Swivel control panel - Shafts and gears hardened and ground - Digital display Sinumerik 828D - Clockwise / counterclockwise rotation of the main spindle - Linear guides - Four-bearing milling spindle radial/axial - All pinch points eliminated by covers - Main motor with spindle brake

TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...

Universal milling machine Lagun from a training workshop in top condition! Head universally rotate, swivel and tilt. Type: FTV2 YOC 2006 Tool holder SK40 Drilling pinole Coolant device Travel X-axis x00 mm Travel Y-axis x60 mm Travel Z-axis x40 mm Milling head type Vertical milling head Speed range 40 - 2000 mm/rev Table clamping surface approx. x00 x x00 mm T-slot size xx mm Feed X-axis xxx mm Feed Y-axis xxx mm Feed Z-axis xxx mm Weight approx. 1,850 kg Further data on request, rest according to photos Special price

Tool milling machine from a training workshop in very good condition Manufacturer Klopp Korradi Year of construction 1991 Digital SK40 automatic feed in three axes Drilling pinole 50 mm Head rotatable Spindle speeds up to 45-1950 rpm x-310 mm y-180 mm z-310 mm Table 600 x 250 mm Feed infinitely variable 10 - 470 mm/min. Machine dimensions approx. 1.0 x 1.1 x 1.6 m Power connection 400Volt 10 Ampere 3-axe digital device AXEsta Counter-holding for horizontal milling Coolant device Chip tub Special price

1 KERN high precision Micro 5 Axis CNC Milling & Drilling machine type HSPC 2216, year 1997, serial number 352, HEIDENHAIN type TNC 426 PB CNC 5-axes contouring controller, polymer concrete monobloc machine frame, working ranges X 220mm, Y 160mm, Z 248mm, electro pneumatic tool changer, magazine for 32 tools, tool changing time approx. 3,0 sec., mid chip-to-chip period approx. 7 sec., brushless and digital drive system travel speed 6.000 mm/min., Z-axis protection by s/s lamelles, half-round sliding door offering a maximum of operator handling comfort, standard chip tray for protection of the X and Y axis, with HEIDENHAIN electronic handwheel type TNC 426 for manual adjustment of the axes, Table 365 x 240mm, Max Clamping area 350 x 230mm, Max workpiece weight 40Kg, 4th & 5th Axis attachment, Fischer Precise Spindle 42,000rpm, 2.6Kw, HSK25E Tool Adapter,  ...

Table clamping surface: x-travel: 400 mm y-travel: 175 mm z-travel: 450 mm Spindle mount: ISO 30 Spindle speeds: 50-2000/50-3400 rpm Operating voltage: 380 V Total power requirement: approx. 2.5 kVA kW Space requirement: 1200 x 1000 x 1600 mm Weight: approx. 1100 kg

Make OKUMA WITH A NEW SPINDEL IN 2019 - RUNS ONLY 6 MONTHS AFTER WAS CHANGED MOTOR AND SPINDLE type MX 45 VAE Year of manufacture 2001/3 CONTROLS: OSP - U100M Technical Details x-way 762 mm y-way 460 mm z-way 450 mm total power requirement 35 kW machine weight approx. 5000 KG Type: MX - 45 VAE Control: OSP - U100M working range: Axis X: 762 mm Axis Y: 460 mm axis Z: 455 mm Spindle speed range: 50 - 7 000 rpm VARIABLE SPEEDS ATC: TOOL BT 40 TOOL MAGAZINE 20 TOOLS tool magazine: 20 pcs. Total power requirement: 35 kVA LAST SERVIS ON SPINDLE ON 2019 - ( BRAND - NEW SPINDLE) COST OF SERVICE OWER 35000 EUR , MACHINE WAS WORKING FROM THAT TIME ONLY HALF YEAR. WE ORGANIZE FOR CLIENT AS WELL TRANSPO

Handy edge milling machine 230V. Scope of delivery as shown. Edge milling up to 7mm, round edge milling up to R3mm. Angle adjustable. HM plates rotatable and replaceable. This new machine comes from a warehouse clean-up. Scope of delivery incl. chip catcher (not shown here).

I sell a tenon machine for parallel milling, grooves for pallet tape etc. WACO T2-SL Year of construction 1984. Groove width 30mm. Motor 3,3kW Made in Germany. Available the same. With dokumentazion.

Code: 0253 Brand: LARI E LARI - ITALY Model: FR 20 - TA - CE Standard Working center for milling and boring on wood or plastic and composite materials, wooden doors, window frames - CE Standard Technical data: X-axis working stroke 3250 mm Y-axis working stroke with 90° cutter 130 mm Z-axis working stroke with 0° cutter 290 mm Z-axis working stroke with 90° cutter 175 mm X-axis working speed mt/min 40 Y-axis working speed mt/min 30 Z-axis working speed mt/min 30 Hinge boring inserting unit: Male/Female Speed control inverter Probe Tool holder collet ER 25 Power of anuba head drilling electric spindle 2,2 Kw Anuba head inclination -10 +90° Electric spindle for milling: 2,7 Hp at 18,000 rpm Collet chuck ER 32 Variable speed via inverter Inclination from 0 to 90° for both vertical and horizontal machining Machine computer: numerical control - Win ...

Table clamping surface: 300 x 1100 mm Travel x: 780 mm Travel y: 250 mm Travel z: 410 mm Cbgaxkvf39 Spindle holder: SK 40 Pinole stroke: 100 mm Spindle speeds: 31.5 - 1400 rpm Feeds longitudinally and transversely: 12.5 - 630 mm/min Feeds vertical: 6.3 - 315 mm/min electr. Connection: 380 V, 5.5 kW Space requirement: 1770 x 1500 x 2050 mm Weight: approx. 2200 kg

SPECIFICATIONS: Engine power HP: 3 Vertical leadership support Replacement tools available

ORDER NO. 6623 TECHNICAL DATA - diameter range of machined pins 200mm - min length of input material 1100mm - infinitely variable feed speed + front/rear - knife head drive motor 15kW - feed motor 1,7kW Successively: - 2 toothed pulling shafts - 4-knife head - 2 smooth pulling pin shafts - electrically adjustable knife head - electrically adjustable shafts - dimensions length / width / height 3570x1300x1700mm - weight about 4000kg ADVANTAGES – German production - the possibility of turning poles into a cone – used turner, very good condition Net price: 159900 PLN Net price: 35533 EUR depending on the price 4,50 EUR (Prices may fluctuate with higher fluctuations)

Agritec floor reversing milling machine UKO 40-120, for PTO 540 rpm, power requirement 18.5-45 kw (25-60 hp) Three-point attachment frame Cat.1, working width 115 cm, total width 142 cm, lateral displacement hydraulic 26 cm, this also allows use on walls, fences, etc. Equipment with trailing grid roller for perfect seedbed preparation. Weight approx. 412 kg. Incl. cardan shaft with friction clutch. 30 knives - all new, ready for operation, incl. cardan shaft with friction clutch. Further reversing milling machine 130 cm working width in stock as well as conventional tillers from 100 to 150 cm, ploughs, cultivators etc.

small handy machine from Swabia

TABLE 500 X 800 ISO 40 CNC1600

KIMLA BPF 2070 CNC router was built in 2010 in Poland by POLCOM Przemysław Kimla. The machine is used for precision machining of parts made of such materials as wood, plastics and aluminium. The machining process is performed on a large work table with a length of 7050 mm and a width of 2085 mm by means of a reliable, high-speed spindle. Process stability, on the other hand, is ensured by an extremely rigid design that effectively eliminates any vibration and oscillation during even the most intense challenges. All this is complemented by an industrial CNC controller with easy-to-use PC-CAM software. The BPF 2070 CNC milling machine weighs 6000 kg. Technical specifications of the KIMLA BPF 2070 milling machine - machinable materials: wood, plywood, polycarbonate, polymer plates, aluminium, etc. - feed in the X/Y/Z axis: 2085/7050/500 mm - work area (L x W): 7050 x 2085 mm - maxim ...

x-travel: 10000 mm y-travel: 1500 mm z-travel: 1000 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Heidenhain TNC 640 Speed [rpm] 12000 Travel X/Y/Z [mm] 400/350/350 Spindle: Technology Direct Drive Speed 12,000 rpm Power (max.) 13 kW Torque (max.) 95 Nm Tool holder SK40 NC swivel rotary table: B-axis -50°/+110° C-axis 360° Clamping surface ø450 mm Table load (max.) 200 kg General: Tool magazine 48 stations Rapid traverse in X/Y/Z 48 m/min Equipment/accessories: Direct displacement measuring system (glass scales) in X/Y/Z Chip Management Chip Conveyor Coolant management IKZ system with filter and high pressure, 30 bar Workpiece Measurement Probe, Heidenhain TS740 Tool Measurement Laser, Renishaw NC4 TX Setup operation Electronic handwheel Other equipment spindle coolers Other accessories Div. gebr. Tool holders

Machine Details Warehouse number 1105-03692 Machine type Milling machine - Universal HERMLE brand Type fp 1000 Year of construction 1988 Control type CNC Control heidenhain 355 Storage location HAGUENAU Country of origin Germany Delivery time IMMEDIATELY Freight base EXW Technical details x-travel 700 mm y-travel 630 mm z-travel 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping surface: 1000 x 490 mm Spindle speed gear stage 1 25 - 400 1/min. Spindle speed gear stage 2 401 - 1260 1/min. Spindle speed gear stage 3 1261 - 4200 1/min. Feed 5 m/min Rapid traverse 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with coolant device Sale without clamping devices

Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

MAHO C Axis Machine Table - Table diameter: 600 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

CME FCM 9000 Bed milling machine 5-axis Table size 9500 x 1200 mm. Travel X-axis 9000 mm. Y-axis 1500 mm. Z-axis 1500 mm. Maximum table load 5000 kg/ Mtr. Vertical milling head can be swivelled by 1°x1° CNC control Heidenhain TNC 430 CB If you have any questions about the machine, as well as a scheduling for viewing, please contact us by phone or e-mail.