5 axis milling used for sale

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/Qj5CNFndP1c - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 21/04/2018 80V 5PzS 775Ah, very good performance measured with 84.0V - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; Fork adjuster with sideshift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Warning light orange - Comfort seat with lumbar support and seat heating Auction-ID: A1-45453-28

New, Tire mounting/ Balancing machine Auction-ID: A3-43535-40

Roof slope 20 degrees Construction consists of: 5 Intermediate trusses: 2 x column I330 and the first 3.40 meters of the roof beam I330 the rest of the roof beam I270 2 End trusses: 2 x corner column H160, 2 x roof beam H120, 2 x intermediate column I200, 2 x intermediate column U220 and 1 x door beam U220 á 4.50mtr. 26 Coupling tubes 70 x 70 x 3 28 Wind bracing strips flat 50 x 6 with tensioner m16 Powder-coated RAL7016 Screws 8.8 With NEN 1090 CE marking certificate Lot is loaded with a forklift for free Auction-ID: A1-46841-8

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, WITHOUT Rema plug for batteries with 300-800Ah possible Delivery by freight forwarder possible on request. Auction-ID: A1-45453-4851

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/2czXIBFJlfE - Former Linde full-service device - Battery: 19/09/2018 80V 575AH, very good performance measured with 82.8V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd + 4th valve; Fork adjuster 60-193 cm with sideshift - LED front work light - LED work light at the rear - Safety light at the rear - Comfort seat - Attention: drives slowly Auction-ID: A1-45453-126

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45453-3684

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/k7v9nwCFAqA - Former Linde full-service device - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; Fork adjuster with sideshift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Front camera - Comfort seat with lumbar support and seat heating - LPG gas exchange bottle (quick to exchange, available everywhere) - Attention: Engine steering noise Auction-ID: A1-45453-162

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, without Rema plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-2450

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/hhOTaEktHsA - Former Linde full-service device - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; Fork adjuster with sideshift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Comfort seat Auction-ID: A1-45453-117

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45453-3683

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/BkohSeev8X0 - Former Jungheinrich full-service machine - Service valid until 05/2027 - UVV valid until 05/2027 - Battery: LI-ION Lithium 2019 48V LIB 390Ah, very good performance measured at 52.3V - Triplex mast with full free lift - Valve, sideshift - Windshield with windshield wiper - Roof pane - LED front work light - Safety light at the rear - Safety light at the front - Comfort seat Auction-ID: A1-45453-232

First owner. Recently serviced and inspected - see photos. Auction-ID: A3-44485-6995

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/qGEik32P4kY - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 10/2019 80V 930Ah, very good performance measured with 85.8V - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; Fork adjuster with sideshift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - StVZO lighting with turn signals for road approval - Warning light orange - Safety light at the rear - Safety light at the front - Comfort seat with lumbar support and seat heating Auction-ID: A1-45453-94

REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-3565

Battery from former Linde Service 830x630x630mm Voltage in idle mode uncharged 51.76 V and thus still very good. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45453-1160

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45453-3701

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-3598

Fuxinlong FSCT770/570 three-station automatic thermoforming machine, designed for the manufacture of thermoformed plastic packaging. Machine suitable for the production of trays, trays, lids and food or industrial packaging in PET, PP, PS or PVC materials. The line includes: Automatic coil feeding, heating station, vacuum and pressure forming, cutting station, Automatic outfeed conveyor and stacking. Equipped with safety guards, integrated controls and complete pneumatic and mechanical systems. Machine to be restored to working order. Auction-ID: A3-43535-38074

Working width 2000mm - Adjustable width cutting machine - Hudraulic lifting arm - Everything seen and tested in working condition - also remains in place until disassembly so that testing can be done before disassembling the machine. For questions about the machine, please send an email to info@troostwijkvavato.com stating the auction number and lot number. Auction-ID: A3-43535-16518

Battery from former Linde Service Very good performance measured at 25.1V Loading on pallet in truck with forklift. Delivery by freight forwarder possible on request. Auction-ID: A1-45453-1165

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-3441

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/CEvrZLMrTPc Former Linde full-service machine Powerful 48V device Front tyres AR PU Rear tyres LR Tandem PU Width over forks 540 mm Fork length 1,150 mm Battery Li-ION 48V 20Ah Charger Li-ION 48V 10A onboard Auction-ID: A1-45453-357

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/qv_q8483Fcg - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 07/01/2020 48V 5PzS 625Ah, very good performance measured with 50.6V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd valve, sideshift - Load protection grille (can be easily dismantled) - LED front work light - LED work light at the rear - Comfort seat with lumbar support Auction-ID: A1-45453-217

REMA Battery Connector 400V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-3451

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 14/09/2018 80V 575AH , very good performance measured with 84.3V - Triplex mast with full free lift - 3rd + 4th valve; Fork adjuster with sideshift - Full cabin with heater and windshield wipers - Facelift model with tilt angle display (practical for sensitive goods) Auction-ID: A1-45453-102

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45453-3651

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/_JKycaXsgcw - Former Linde full-service device - Triplex mast with full free lift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - StVZO lighting with turn signals for road approval - Comfort seat Auction-ID: A1-45453-134

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45453-3702

Battery with good performance, last service 09/2025 with 48h desulphation Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45453-1164

The 18 volt LXT battery BL1850B from Makita is equipped with a handy sliding system and an LED indicator. The LED indicator shows the status of the battery and filling. When 4 LEDs are on, the battery still has a capacity = 75-100% When 3 LEDs are lit, the battery still has a capacity = 50-75% When 2 LEDs are lit, the battery still has a capacity = 25-50% When 1 LED is on, the battery still has a capacity = 0-25% If the last LED starts flashing, the battery needs to be recharged. If two of the four LEDs flash alternately, there may have been a malfunction in the battery. Amperage per hour: The higher the Ampere stated with a battery, the longer the battery can supply voltage (power), the charging time is also influenced by the Ampere-hour. In addition, the lot also contains a Makita battery charger DC18SD Auction-ID: A1-46851-1223

REMA Battery Connector 220V Wall Plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-3623

Industrial Deburring Stations – Year 2019 SEW USOCOME actuator – Pneumatic control - General Description: We offer for sale these industrial deburring stations in good condition, year of construction 2019, designed for deburring operations in industrial environments. Robust, compact and safe stations, ideal for mechanical, machining, sheet metal or industrial subcontractors. - Technical characteristics Equipment Type: Deburring Station Year: 2019 Engine : SEW USOCOME Engine type: DRN80M2/BE05/FI B3 Maximum speed: 2860 rpm Order Type: MCLTPB0015-5A3-4-00 Structure: Column station with reinforced base - Integrated equipment Pneumatic up/down Foot pedal control Adjustable protective screen Built-in light stand Complete electrical box with dimmer and protections - Benefits Recent Material (2019) Rugged industrial manufacturing Engine recognized for its reliability Quick and easy inst ...

REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-3580

Important and outstanding design features of the RaptorX-SL with steel substructure in gantry design RaptorX-SL1200/S15 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. Special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm h ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. echnische data: External dimensions LxWxH: 1650x1440x1950 mm Weight: approx. 650 kg Clamping surface XxY: 930x630 mm Travel XxYxZ: 900x600x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: appr ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. Technical specifications: External dimensions LxWxH: 1970x2150x1950 mm Weight: approx. 950 kg Clamping surface XxY: 1230x1320 mm Travel XxYxZ: 1200x1300x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reve ...

End Milling Machine Drill Milling Machine working width mm: 3200 Left - right swivelling saws from 0° - 45°. Complete with drilling unit Suitable for machining doors and door posts.

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 33064 Year of construction approx. 1960 Overhauled in 2012Travel distances X: 300 mm Y: 150 mm Z: 330 mmTable size 600 x 210 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 1.1 and 1.4 kWNerg connection 380 volts, 50 Hz- Feed in the X and Y axis- Pinol displacement on the vertical milling head- Fixed angle table- Coolant device with mechanical pump in the machine foot-

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 52185/08 Year of construction 1968Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 250 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.4 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Two motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- Coolant device in the machine foot- Adjacent control cabinet- Counter holder

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 51265/08 Year of construction approx. 1967Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 2100 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.6 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- adjacent control cabinetSpace requirement L x W x H 1100 x

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base