5 axis milling used for sale

Year of construction 2018; motor power 5.5 kW; supplied with a supply. Auction-ID: A1-45771-17

250 kg towing capacity 4 meters length, unused Auction-ID: A1-40418-287

Oil-free & Brushless Ring Saw - Rated power: 5000w - constant RPM: 1800 rpm - Voltage AC220V - Max cutting size: 39 cm - Blade Diameter: 500 mm - nw: 11.5 kg Auction-ID: A1-40256-86

52cc, approx. 48 cm blade length, easy start system, unused in box Auction-ID: A1-40418-229

ABUS pillar jib crane An ABUS column slewing crane is sold. Load capacity: 500 kg Height: 350 cm Length: 500 cm The scope of delivery also includes a crane inspection book. Auction-ID: A1-46872-7

Petrol Lawn Mower - 196 cc / 4.7 hp – 53cm wide – 62L bucket Auction-ID: A1-40418-371

Laser Machine Prima Power CV 5000 Year of Make: 2016 Additional equipment Donaldson Welding Fume Extraction: Donaldson Torit 2DFP6 Year of Make: 2016 3.1. CV Series CO₂ Laser Specifications (CV 5000) Average power: 200 W – 5,000 W Peak power: up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam divergence: 1.5 mrad (half angle) Beam diameter at output: 15 mm 1/e², 21 mm solid beam Pulse operation – pulse repetition rate: 0 – 2 kHz Pulse width: 250 microseconds, 70 μs resolution Alignment stability: +/- 150 μrad Operating conditions: Ambient temperature (max.): 40 °C Ambient temperature (min.): 10 °C Relative humidity: < 95% (non-condensing) Diode laser: Wavelength: 635 nm Output Power: < 1mW 3.2. CV Series CO₂ Laser Supply Specifications (CV 5000) Electrical: Power: 37  ...

• Fendt Saphir 540 Caravan / Caravan • Type A313 • Built in 2009 • Well-maintained used condition • Ready to use • Chassis number: WFC1540JH91409351 • Empty weight approx. 1340 kg • Permissible total weight 1700 kg • TÜV until 12/2026 • Sleeps up to 4 people • Seating area in the rear can be converted into a bed • Two single beds in the front area • Kitchenette with stainless steel sink • Fridge with freezer compartment • 3-burner gas stove with cover • Truma gas heater with convection fan • Wet room with toilet and sink • Fly screens and blackout blinds • Large roof hoods • Plenty of storage space available • Water tank approx. 30 litres • Awning with poles approx. 2500 x 2500 mm • 100 km/h registration possible • External dimensions approx.: - Length 730 cm - Width 230 cm - Height 265 cm • Colour: White / G ...

Machine type: Backhoe loader Manufacturer: Komatsu Model: WB93S-5E0 Year/Manufacturer: 2018, Komatsu Utility Europe S.p.A. (Italy) Serial number: F20155 PIN: KMTWB024P77F20155 Operating hours: 8,672 h (approx. read from display) Engine power: 74 kW Operating weight: 9,500 kg Equipment: - Front loader bucket (4-in-1 type visible) - Rear backhoe unit - Stabilizers (rear outriggers) - Enclosed cabin - KOMTRAX system - All-wheel drive Tires: 16.9-24 Condition: - Used condition Remarks: - Versatile backhoe loader for construction and utility work - European specification machine Own mass: approx. 9,500 kg Auction-ID: A7-45990-61

Type: Motor cultivator / rotary tiller Manufacturer: Viking Model: HB 585.0 Engine manufacturer: Kohler Engine type: Petrol engine Power: 2.4 kW Year: 2012 Working width: Approx. 850 mm Transport wheels: Yes Noise level: 93 dB Condition: Used condition with scratches, dirt and surface rust on blades Remarks: Functionality not tested; equipped with rotary tiller blades and transport wheels Auction-ID: A7-45990-94

Steel frames for barrels Auction-ID: A1-45771-108

Including Chem, Intersaw, Elematic and HMT including cutting oil, various lubricants HMT, various cleaners including HD cleaner, microlube and protector Auction-ID: A1-46604-148

Machine type: Telescopic handler Manufacturer: CLAAS (by Caterpillar) Model: TARGO K50 / CAT 512 Year of manufacture: 2002 Serial number: 51200549 Technical data: Engine power: 91 kW Unladen weight: 7,360 kg Rated capacity: 4,000 kg Permissible total weight: 8,500 kg Axle load front: 4,000 kg Axle load rear: 4,700 kg Equipment: - Telescopic boom - Fork carriage with pallet forks - Enclosed operator cab - All-terrain tires - Hydraulic quick coupler - Lighting system Condition: - Used condition - Visible corrosion and paint wear on boom and chassis - Fork attachment with rust - Cabin in used but complete condition - Hour meter reading: approx. 5,712 h - Important: Reverse drive not-working Remarks: - Robust agricultural/industrial telehandler - Suitable for loading and material handling - Manufactured for CLAAS by Caterpillar (UK)  ...

Manufacturer: SANY Heavy Machinery Limited Model / Type: SY55U (G4) Machine type: Hydraulic excavator (mini excavator) Serial number: SY005CER965K8 Year of manufacture: 2025 Operating mass: 5,294 kg Engine power: 36.0 kW @ 2000 rpm Manufactured in: China (Jiangsu) Remarks: CE marked; enclosed cabin; rubber tracks; front dozer blade; equipped with digging bucket; modern digital display showing approx. 69 operating hours; very good visual condition with minor signs of use; machine appears nearly new; Own weight: approx. 5,300 kg Dimensions (L x W x H): approx. 5,500 x 2,000 x 2,550 mm Auction-ID: A7-45990-2

Equipped with conveyor belt 1000x400 mm with Foenix FX label / marking machine, discharge roller conveyor 400 mm wide, approximately 11 meters long Auction-ID: A1-45771-15

Hobby DeLuxe Edition 560 KMFe 2021 Are you looking for a spacious, modern and complete family caravan? This Hobby De Luxe 560 KMFe from April 2021 offers everything you need for a relaxing holiday. With its smart layout, high-quality finishes and many luxury amenities, this is the ideal caravan for families or couples who appreciate comfort and space. For Sale Hobby 560 KMFE De Luxe Edition with Bunk Bed and Air Conditioning Dometic year 2021 Still like new, very little used Never smoked or boiled Lots of options on this Caravan, not everything is described, among other things. Maximum permissible weight Increased to 2000kg. Load Thule pocket awning with a projection of 3 m. Thule bike rack Automatic Dometic Air Conditioning in the roof Floor covering set Bunk beds with fall protection and fixed ladder, seating group that can be converted into an extra bed Children's lamps with USB co ...

52cc, approx. 48 cm blade length, easy start system, unused in box Auction-ID: A1-40418-247

Including type Poly-PTX Flapwheel 105x50mm, Poly-PTX Mix wheel 115x100mm, Poly-PTX fleece Wheel 105x50mm,..., complete with some liquids Eisenblätter including oil and polyseal Auction-ID: A1-46604-110

Without content, to be dismantled by customer. Auction-ID: A1-46604-459

55 mats with 23 poles; size 2500x1630 mm; mesh size 50x200 mm; transport dimensions approximately 2500x1630x1300 mm; without fasteners; thickness 6/5/6 mm unused Please note max 23 poles 250cm length Auction-ID: A1-40418-409

In various sizes and designs, Lying in wooden packaging Auction-ID: A1-46604-453

Industrial Deburring Stations – Year 2019 SEW USOCOME actuator – Pneumatic control - General Description: We offer for sale these industrial deburring stations in good condition, year of construction 2019, designed for deburring operations in industrial environments. Robust, compact and safe stations, ideal for mechanical, machining, sheet metal or industrial subcontractors. - Technical characteristics Equipment Type: Deburring Station Year: 2019 Engine : SEW USOCOME Engine type: DRN80M2/BE05/FI B3 Maximum speed: 2860 rpm Order Type: MCLTPB0015-5A3-4-00 Structure: Column station with reinforced base - Integrated equipment Pneumatic up/down Foot pedal control Adjustable protective screen Built-in light stand Complete electrical box with dimmer and protections - Benefits Recent Material (2019) Rugged industrial manufacturing Engine recognized for its reliability Quick and easy inst ...

CNC Control: MAZAK & FANUC L-64 Cutting table: spiked Cutting head: CO₂ laser Suction system: KEMPER with external unit Indicated voltage: 40000 V X-Y-Z axis strokes: 3335 x 1545 x 420 mm A-axis: ±360° B-axis: ±135° Maximum part dimensions: 3050 x 1525 x 22 mm Load capacity: 7.9 kN / 810 kgf Laser power: 4000 W Laser Model: YB-L400A8M Weight: 14600 kg Status: Complete machine with suction unit and accessories Additional information: Sold with an additional laser unit and many spare parts Additional information: Disassembly and loading at the expense of the buyer

Industrial Deburring Stations – Year 2019 SEW USOCOME actuator – Pneumatic control - General Description: We offer for sale these industrial deburring stations in good condition, year of construction 2019, designed for deburring operations in industrial environments. Robust, compact and safe stations, ideal for mechanical, machining, sheet metal or industrial subcontractors. - Technical characteristics Equipment Type: Deburring Station Year: 2019 Engine : SEW USOCOME Engine type: DRN80M2/BE05/FI B3 Maximum speed: 2860 rpm Order Type: MCLTPB0015-5A3-4-00 Structure: Column station with reinforced base - Integrated equipment Pneumatic up/down Foot pedal control Adjustable protective screen Built-in light stand Complete electrical box with dimmer and protections - Benefits Recent Material (2019) Rugged industrial manufacturing Engine recognized for its reliability Quick and easy inst ...

Laser Machine Prima Power CV 5000 Year of Make: 2016 Additional equipment Donaldson Welding Fume Extraction: Donaldson Torit 2DFP6 Year of Make: 2016 3.1. CV Series CO₂ Laser Specifications (CV 5000) Average power: 200 W – 5,000 W Peak power: up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam divergence: 1.5 mrad (half angle) Beam diameter at output: 15 mm 1/e², 21 mm solid beam Pulse operation – pulse repetition rate: 0 – 2 kHz Pulse width: 250 microseconds, 70 μs resolution Alignment stability: +/- 150 μrad Operating conditions: Ambient temperature (max.): 40 °C Ambient temperature (min.): 10 °C Relative humidity: < 95% (non-condensing) Diode laser: Wavelength: 635 nm Output Power: < 1mW 3.2. CV Series CO₂ Laser Supply Specifications (CV 5000) Electrical: Power: 37  ...

Manufacturer: DOOSAN Year: 2008 Type: CNC Vertical Machining Center Numerical Control: FANUC 0i-M Series Strokes: X 1020 mm / Y 510 mm / Z 525 mm Fast Feeds: X/Y 36 m/min – Z 30 m/min Spindle: 12,000 rpm – 11 kW (continuous) Tool magazine: 30 tools Table: 1200 × 500 mm – max. load 799 kg Accuracy: ±0.005 mm – repeatability±0.003 mm Dimensions (mm): 2795 × 2850 × 2275 Weight (kg): 6500

Industrial Deburring Stations – Year 2019 SEW USOCOME actuator – Pneumatic control - General Description: We offer for sale these industrial deburring stations in good condition, year of construction 2019, designed for deburring operations in industrial environments. Robust, compact and safe stations, ideal for mechanical, machining, sheet metal or industrial subcontractors. - Technical characteristics Equipment Type: Deburring Station Year: 2019 Engine : SEW USOCOME Engine type: DRN80M2/BE05/FI B3 Maximum speed: 2860 rpm Order Type: MCLTPB0015-5A3-4-00 Structure: Column station with reinforced base - Integrated equipment Pneumatic up/down Foot pedal control Adjustable protective screen Built-in light stand Complete electrical box with dimmer and protections - Benefits Recent Material (2019) Rugged industrial manufacturing Engine recognized for its reliability Quick and easy inst ...

BIG weld-on hook suitable for Liebherr 506, 507, 508, 509, - Year of construction: 2025, - made of S355 steel, Further recordings also available!

BIG weld-on hook suitable for Liebherr 506, 507, 508, 509, - Year of construction: 2025, - made of S355 steel, Further recordings also available!

Important and outstanding design features of the RaptorX-SL with steel substructure in gantry design RaptorX-SL1200/S15 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. Special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm h ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. echnische data: External dimensions LxWxH: 1650x1440x1950 mm Weight: approx. 650 kg Clamping surface XxY: 930x630 mm Travel XxYxZ: 900x600x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: appr ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. Technical specifications: External dimensions LxWxH: 1970x2150x1950 mm Weight: approx. 950 kg Clamping surface XxY: 1230x1320 mm Travel XxYxZ: 1200x1300x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reve ...

End Milling Machine Drill Milling Machine working width mm: 3200 Left - right swivelling saws from 0° - 45°. Complete with drilling unit Suitable for machining doors and door posts.

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 33064 Year of construction approx. 1960 Overhauled in 2012Travel distances X: 300 mm Y: 150 mm Z: 330 mmTable size 600 x 210 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 1.1 and 1.4 kWNerg connection 380 volts, 50 Hz- Feed in the X and Y axis- Pinol displacement on the vertical milling head- Fixed angle table- Coolant device with mechanical pump in the machine foot-

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 52185/08 Year of construction 1968Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 250 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.4 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Two motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- Coolant device in the machine foot- Adjacent control cabinet- Counter holder

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 51265/08 Year of construction approx. 1967Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 2100 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.6 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- adjacent control cabinetSpace requirement L x W x H 1100 x

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base

Table milling machine ELEKTRA table milling machine TF 100 M, nameplate not visible

End mill, end mill, cutter, shell cutter, milling head, angle cutter, shell angle cutter, angle end mill, prism cutter -Angle milling cutters: Attachment angle milling cutters, prism milling cutters -Type: Ø85 x 35 mm -Hole: Ø 27 mm -Quantity: 1x milling cutter available -Dimensions: Ø 85 x 35 mm -Weight: 0.8 kg