5 axis machining used for sale

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Transfer: in the current condition as seen -Lid pushed in: see pictures -Air filter housing -for: filter donaldson XLP 18 2046 -Inlet / outlet: O 150/149 mm -Dimension: O 355/595 mm -Weight: 12.35 kg

Longitudinal cut-to-length line for the sheet metal industry 1,500 x 1.5 mm Belt width 1,500 mm Band thickness 0.4 -1.5 mm Longitudinal sections 3 Coil weight 3,000 kg# Speed 15 m/min. 3 unwinders Machine very well maintained, immediately ready for use, ex site

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Plate is: scraped -Width: 502 mm -Length: 801 mm -Height: 930 mm -Plate thickness: 10 mm -Plate with: support ribs -Number: 1x plates available -Price: per piece -Transport dimensions: 801/502/H930 mm -Weight: 128 kg

Conditie Old Stock Version 1 inch BSP Boring in mm 200 mm Stroke in mm 500 mm Shaft 75 mm Length retracted H.o.H. in mm 1010 mm Length from H.O.H. in mm 1510 mm Pressure in bar 200 bar Strength, kilo at 200 bar 60 ton Length 110cm Width 30cm Height 30cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Digital scale for press brake, edging bench, guillotine shears ... Glass scale, glass measuring stick, rule, digital display, measuring stick, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display -from: Hammerle AP 100 press brake -Length unit: 420 mm -Number: 2x available -Price: complete -Dimensions: 550/80/H40 mm -Weight: 4.4 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles are: unused -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 505 mm -Total length: 680 mm -Number: 2x spindles available -Price: per piece -Weight: 6.8 kg

Roller conveyor, conveyor track, roller conveyor belt, roller conveyor, -Ideal for: band saw, cold circular saw, ... -Execution: difficult -not powered -Roll width: 540 mm -Transport length: 2670 mm -Roles: Ø 55 mm -Roll distance: 250 mm -Total height of roller conveyor: 810 mm adjustable -Transport dimensions: 2670/640/H810 mm -Weight: 234 kg

double grinder, double grinder, column grinder, column grinder, drill grinder -Double grinder with: water cooling -Grinding disc: max. Ø 450 x 63 mm -Speed: 950 rpm -Engine power: 3.3 kW -Operating voltage: 380 volts -Quantity: 2 pieces available -Price: per piece -Dimensions: 370/370/H1090 mm -Weight: 404 kg

Electro-hydraulic lifting device, linear drive, linear gearbox, lifting gearbox, spindle drive, electro-hydraulic actuator for valves, valve drive, actuator, actuator motor, actuator cylinder for rotor brake, disc brake, electro-hydraulic disc brake, crane brake, electro-hydraulic lifting device, lifting drive -Restoring force: 120 N -Power: 0.15 kW -Stroke: 50 mm -Dimensions: 417/150/H190 mm -Weight: 9 kg

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan Manufacturer: Ziehl-Abegg, radial fan type DKHR 560-6-6 -Speed: 855/625 rpm -Power: 0.47 kW -Fan diameter: 570 mm -Protection class: IP 44 -Number: 5x radial fans available -Price: per piece -Weight: 16.5 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-50-500-PPV -Piston: Ø 50 mm -Stroke: 500 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 70/70/H585 mm -Weight: 4.65 kg

Gear motor, electric motor, three-phase motor -Manufacturer Motor Bockwldt type: CB0-56N-4D -Gearbox manufacturer: Bockwoldt -Speed: 30.5 rpm -Power: 0.09 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: -Number: 1x motors available -Price: per piece -Dimensions: 310/160/H175 mm -Weight: 10.7 kg

This 3-axis TRUMPF TruLaser 5030 was manufactured in 2012. It features a powerful 6,000 W laser and is equipped with a HANDTE MF-L 2000 extraction system. The machine has been completely freshly serviced and has a total of 20,118 laser hours. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 CO2 laser cutting machine we have for sale. Contact us for further details.

Slit screen basket, slit screen baskets, replacement basket, replacement baskets, separator basket, separator slit screen, separator filter grid, separator grid -Slotted sieve basket for: screw separator -Gap dimensions: 2 x 47 mm -Unfolded dimensions: 1000 x 955 mm -Dimensions: 595/1000/H313 mm -Weight: 16 kg

Drilling capacity steel/cast iron: 50mm/60mm, spindle axis-column distance min./max.: 350mm/1600mm, spindle end-working surface distance: 350mm-1250mm, horizontal traverse: 1250mm, column arm vertical travel: 580mm, column diameter: 350mm, arm swivel: 360°, speed: 2000rpm, spindle travel: 315mm, torque: 392Nm, feed force: 15.6kN, machine dimensions X/Y/Z: approx. 2500mm/1250mm/3250mm, weight: approx. 3500kg. The coolant pump, the seal retainer and the measuring system are defective. Documentation available. An inspection on site is possible.

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -Diameter: 570mm -Total width: 314 mm -Strap: 12 -V-belt width: 22 mm -Taper socket recording: Ø 95 mm (can be changed) -Pelt: balanced -Quantity: 1x pulleys available -Price per piece -Weight: 169kg -other pulleys in stock

PLASTIMAC LAB EXTRUDER, for blown film, suitable for testing granulate, 25 mm screw diameter, 70 mm diam. die, 500 mm collection frame, 7,5 Hp drive, complete wuth supporting structure, (corona treatment+small printer can be sold separately if required), installed power - used power in work: about 60-65% : 7,5 Hp, working width: 500 mm, conditions: good

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Speed: 27 m/min -Drive: 0.6 kW -Belt width: 450 mm -Belt length: 2040 mm -Roller conveyor: powered -Roll width: 550 mm -Transport length: 960 mm -Rollers: Ø 31 mm -Roll distance: 40 mm -Height: 850 mm adjustable and tiltable -Transport dimensions: 3160/620/H850 mm -Weight: 354 kg

Manufacturer: Ekra Model: Serio 5000 Machine Type: Fully Automatic SMT Stencil and Screen Printer Year of Manufacture: 2022 Configuration: Back-to-Back dual printing system User Interface: SIMPLEX touchscreen control Vision Alignment: EVA - EKRA Vision Alignment System (dual CCD cameras) Stencil Cleaning: iROCS automatic stencil underside cleaning Print Repeatability: +/- 12.5 micron at 6 Sigma Application: Solder paste and adhesive printing on PCBs Find more here - / Contact us at -

x-travel: 4.700 mm y-travel: 1.250 mm z-travel: 1.500 mm control: HEIDENHAIN iTNC 530 clamping table: - surface area: 5.000 x 1.000 mm max. workpiece weight: 10.000 kg T-slot number x size: 7 x 22 Abstand 140 mm Universal Milling Head: _ Swiveling area front/back level: automatisch Indexing: 0,001 x 0,001° stepless Constant Power at 100 % ED: 37 kW Speed range, stepless: 35 - 4.500 min-1 max. torque: 880 Nm tool taper: SK 50 – DIN 69871 internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/240 mm workpiece length: 300 mm weight of tools max.: 25 kg feeds: - X-, Y- and Z-axis, stepless: 6 - 15.000 mm/min rapid in X/Y/Z: 25.000 m/min max. feed force X-Y-Z-axis: 10.000 N total power requirement: kW weight of the machine ca.: 35 t dimensions of the machine ca.: 12,7 x 5,6 x 4,2 m Equipment / Accessories:Hea ...

rotary actuator, actuator, actuators, geared motor, electric motor, electric geared motor -Actuator for: gate valves, locks, ... -Speed: 160 rpm -Power: 8.5 kW -Design: hollow shaft -Hollow shaft diameter: 30 mm -Protection class: EX -Number: 2x drives available -Price: per piece -Dimensions: 850/750/H560 mm -Weight: 86 kg

9x PCS Intus 5600 Time Attendance Terminal RFID. Due to a change of provider, we have 9 PCS time and attendance terminals for sale. These were operated by us via RFID Myfare access chips. Very robust and intuitive devices.Further information can be obtained on the homepage of PCS. New price was 2200€ net / piece. The price refers to 1 terminal. If several devices are purchased, a package price can of course be negotiated. Very good condition, fully functional. Insured shipping possible. Net unit price. For traders, an invoice with VAT will be issued.

Vertical BAZ MIKRON VC 500 with internal cooling 10 bar Year: 2001 Control: Heidenhain 430 TNC Operating hours: 3,300h Technical data: Spindle speed: 10,000 1/min Drive power: 13 KW Tool holder: SK 40 Number of magazine slots: 21 pcs. Travels: X-axis: 510mm Y-axis: 510mm Z-axis: 560mm Table size: 650x600mm Accessories: - IKZ with 10bar - Späneförderer - Electronic handwheel - Renishaw 3D button - Oil mist extraction - Rotoclear Machine was in a training company

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -with: pneumatic lifting device -Stroke: 35 mm -not: driven -Roll width: 585 mm -Transport length: 2000 mm -Rollers: Ø 80 mm -Roll distance: 220 mm -Total height of roller conveyor: 205 mm -Transport dimensions: 2070/930/H205 mm -Weight: 264 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer gearbox: Lenze Type: 11.512.03.00.0 -Manufacturer engine: Hanning type: 7A8-271 -Motor power: 0.18 kW / 380 volts -Speed range: 82-490 rpm -Design: adjustable -Design: B3 -Height of shaft axis: 78 mm -Drive shaft: Ø 14 mm -Quantity: 3 engines available -Price per piece -Dimensions: 360/204/H190 mm -Weight: 18kg

CTP System Creo Trendsetter VLF 5880; good condition; Video Die Cutter Hatchet OPU 200 VB Bj.2017; Observation Unit Mega Steel; Development machine Kodak THDX 165 Bj.2014; intermediate table; Outlet table. CTP System Creo Trendsetter VLF 5880; good condition; optical video punch Beil OPU 200 VB year 2017; control terminal Mega steel; processor Kodak THDX 165 year 2014; intermediate table; outfeed table.

A fully functional sandblasting system is being sold. Dimensions of working chamber approx. H180 W 150 D160 cm Dimensions approx. H400 W210 L210cm There are 2 lifts available Price per piece 8000 Euro net plus VAT Available from June 2026 If you buy both machines, you will get a basement extraction system with water separator free of charge. See other ads. The plant must be dismantled and transported away by the plant itself. There is only a 2t forklift on site The system is handed over by us without electricity. Article location Nuremberg All information without guarantee

Continuous tunnel cooler with short heat-holding section, make Steiner, type TP 900/5000, year of manufacture 2012, for the continuous pasteurization/cooling of hot-filled products, such as jam, marmalade, dips, seasoning sauces or spreads in jars,, Usable belt width: 900 mm,, Usable tape length: approx. 5,000 mm,, Adjustable throughput times: 11.26 - 49 minutes,, Nominal throughput time: 29 minutes,, 4 circulation pumps (1.1 kW),, Holding zone (5min), 3 cooling zones (each 8 minutes),, Max. container throughput height: 220 mm,, energy consumption at cont. Operation: approx. 70 kg steam / h,

Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor -Execution: stable -without drive motor roller conveyor -Roll width: 590 mm -Conveying length: 1800 mm -Diameter roller: 80 mm -pneumatic lifting: 30 mm -Delivery height: mm adjustable -Number: 1x stations available -Price: per piece -Dimensions: 2070/925/H205 mm -Weight: 266 kg

Extraction slides, ventilation duct slides, slides for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Length: 470 mm -Connection: Ø 500 mm -mechanical: flap -Material: Steel sheet -Quantity: 1x slider available -Price: per piece -Dimensions: 550/470 mm -Weight: 22 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -not: driven -with: material brake -Roll width: 500 mm -Transport length: 1080 mm -Rollers: Ø 80 mm -Roll distance: 200 mm -Total height of roller conveyor: 205 mm -Number: 17x transport trolleys available -Price: per piece -Transport dimensions: 1200/620/H980 mm -Weight: 42 kg/piece

DC motor, servo motor, gear motor, electric motor, direct current gear motor -Motor speed: 3000 rpm -Manufacturer: Motor Lenze type 43.550.54.0.1.5 -Manufacturer: Lenze gearbox type 5/8000/5868 -Manufacturer: Lenze gearbox type 12.602.10.5 -Translation: 1: 12.5 -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 670/220/H220 mm -Weight: 28 kg

Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 361 mm -Table surface: 1545 x 300 mm -Table thickness: 20 mm -Dimensions: 1545/500/H361 mm -Weight: 222 kg

x-travel: 500 mm y-travel: 350 mm z-travel: 375 mm digital readout: AKTIV - Digitalanzeige turning speed range: 63 - 4000 U/min spindle taper ISO: 40 table surface area: 800 360 mm total power requirement: 3 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2 2 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 500 mm -Length of the table surface: 10930 mm -Height of table surface: 262 mm -Working height: 262 mm -Price: per piece -Number: 1x available -Transport dimensions: 11370/510/H240 mm -Weight: 2020 kg

High-pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Engine power: 11 kW -Density: 1.2 kg/m³ -Volume output: 84 m³/min -Pressure increase: 3800 Pa -Connection input: Ø 275 mm -Connection output: Ø 270 x 130 mm -Dimensions: 1000/800/H700 mm -Weight: 252 kg

B&A REF: 9253 TON: 55 SCREW DIAMETER: 32MM SHOT WEIGHT: 92.3 STROKE VOLUME: 96.5CM3 INJECTION PRESSURE: 2127AR PLATEN SIZES: 565 X 540MM DBTB: 360 X 335 MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 400MM MAX DAYLIGHT: 650MM EJECTOR STROKE: 80MM CONTROLS: ALPHA MOTOR: 11 SERVO HEATING CAPACITY: 7.7KW

Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -HOMAG finishing unit allows you to smooth the milled edges for optimal appearance of the edge overhang -with scanning of 2 sides each -scraping blade from above and below -Quantity: 1 piece available -Dimensions: 500/450/H650 mm -Weight: 60 kg

Mawera heating system Wood chip heating Type FU 550 RIA Year of manufacture 2001 Heating system for wood chips Insertion with feed screw Stoker screw Heating capacity up to 550 kW Including dismantling and loading

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -not powered -Number: 4x roller conveyor on wheels -Track width: 2220 mm -Roll width: 500 mm -Transport length: 2600 mm -Rollers diameter: 80 mm -Roll distance: 170 mm -Total height of roller conveyor: 300 mm -Transport dimensions: 2600/1500/H1070 mm -Weight: 340 kg

Roller conveyor, conveyor belt, roller track -Roller width: 700 mm -Conveyor length: 5450 mm -Roller diameter: 80 mm -Axle spacing: 100 mm -Height: mm -driven: via belt -Geared motor: 0.55 kW -Speed: 12.6 m/min -Quantity: 1x roller conveyor available -Dimensions: 5450/1040/H480 mm -Weight: 400 kg

Roller conveyor, conveyor belt, roller track -Roller width: 700 mm -Conveyor length: 5020 mm -Roller diameter: 80 mm -Axle spacing: 100 mm -driven: via belt -Geared motor: 0.55 kW -Speed: 12.6 m/min -Number: 1x roller conveyor available Price: per piece -Dimensions: 5380/1050/H450 mm -Weight: 450 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 15 mm -Tool: Ø 160 x 3.5 mm -Number: 3x motors available -Price: per piece -Dimensions: 200/85/H70 mm -Weight: 3.3 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 500 mm -Length: 800 mm -Working height: 140 mm -with: support ribs -Plate thickness: 30 mm -Number: 1x plates available -Price: per piece -Weight: 108 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Admission: -Tool: Ø 150 mm -Dimensions: 880/260/H300 mm -Weight: 18.5 kg

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louvre flaps, non-return flaps, lamellar fans -Ventilation flap: Louvre fan louvre flap -Ventilation flaps: mechanically adjustable, without drive -Opening 6 slats: 1170 x 510 mm -Dimensions: 1325/560 / H115 mm -Weight: 21 kg

GeneralUniversal Turning Machine with cycle control and RMS-Sensor; Control: MANUAL PLUS Main drive 1Type of main driveAC Drive power (100% DC)12 kWSpeed range10 - 3000 rpmNumber of Gearsteps2 Max. torque (40% DC)920 NmWorking areaSwing diameter over guide ways500 mmSwing diameter over transverse guideway285 mmCentre height1000 mmTransverse stroke260 mmWork spindle (left)Spindle noseacc. To DIN 55027 Diametre of spindle nose8 Spindle bore70 mmSpindle diametre on front bearing120 mmSlide 1Rapid traverse in X8 m/minRapid traverse in Z10 m/minFeed rate in X5000 mm/minFeed rate in Z5000 mm/minFeed rate torque (100% DC) in X500 daNFeed rate torque (100% DC) in Z1000 daNFloor space/WeightDimensions (L x W x H)3,1 x 1,95 x 1,83 mWeight approx.2900 KgMiscellaneousColour Disk turret, Sauter, DIN 69880-30 mmDisk turret, 8 stations for fix tools, make Sauter, tool reception DIN 69880-30 mm mounted  ...

Qty. 1 Second-hand board paper mill Mfc.: JUNG KWANG, NYM Machinery, Built: TBA Stopped: 2017 Type of Machine: Multi Cylinder Mold ( easy Former ) Grade of paper: Board paper , Liner board paper Basic Weight: 180 g/m2 ~ 550 g/m2 Slice Width: 3150 mm Operation Speed: 150 ~ 50 m/ Min. Production capacity : 130 ~ 100 T / day Current condition: installed on foundation

Combination conveyor, fan with connection to the hopper, fan conveyor, combination conveyor, AirMove - components, injector conveyor, injection conveyor -Injector conveyor: injection conveyor with distributor, without fan -Inlet funnel: 175 x 180 mm -Distribution radius: 200 mm -Discharge pipe: Ø 60 m -Drive motor: Euronorm 0.09 kW -Number: 3x conveyors available -Price per piece -Dimensions total: 1630/500 / H1230 mm -Weight: 57 kg