126,698 used machines on RESALE, but how to find them? Machine Search
Reference Num.: 3478 Brand: Ryobi Type: 512 Construction year: 1996 Impressions: 55 mio Size: 520 x 365 mm Available: directly Status: In production Location: Deutschland Sheet size: min 100 x 150 mm, max 520 x 365 mm Printing speed: max 11,000 sheets/hour Printing units: 2 Paper thickness: 18.11 mm Machine size: Length: 2,215 mm, Width: 1,561 mm, Height: 1,598 mm Total weight: kg 2,200 / lbs 4,850 Equipment: - Crestline Filmfeuchtwerk
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet - Tool cabinet. Drawer cabinet Stumpf Series 3000, sturdy design, total load 4400 N -6 drawers: layout/height see photos -Load capacity: see photo type plate -lockable: with key -Dimensions: 500/500/H1000 mm -Weight: 43 kg
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Rexroth, pneumatic cylinder type 521 175 001 0 -Stroke: 50 mm -Piston: Ø 40 mm -Piston rod: Ø 18 mm -Max. pressure: 10 bar -Dimensions: 230/52/H52 mm -Weight: 1.7 kg
Servo motor, electric motor, DC motor -Manufacturer: Advance, DC motor -Type: 564... unfortunately no longer recognizable -Voltage: 36 VDC -Power: kW -Speed: 1800 rpm -Shaft: Ø 16 x 55 mm -Dimensions: Ø 130 x 275 mm -Weight: 8.0 kg
sheet width: 2040 mm plate thickness: 3,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 2,30 t dimensions of the machine ca.: m Manual back stop up to 500 mm Side stop and table extensions Knives sharpened The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tool taper: 54 x SK 50 worktool system: 27 x System TUL Kelch Packing: 1200800350 mm Shipping weight: ? kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, FL Switch, 5-port Fast Ethernet Switch, Controller Ethernet -Manufacturer: Weidmüller, Ethernet Switch -Type: IE-SW-BL05-5TX -Dimensions: 80/50/H125 mm -Weight: 0.2 kg
Clamping angle, clamping aid, clamping angle for workpiece clamping -Clamping angle: clamping aid for workpiece clamping -Clamping surface: width 470 mm, holes M16 -Dimensions: see photos -Dimensions: 560/470/H405 mm -Weight: 62 kg
Transnorm belt conveyor GF 3990-700-600 RA2069 Technical data: Conveyor length (NL): 3990 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): 0,67 Drive: SEW gear motor R17 DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3990 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: ...
Switches, pushbuttons -Fan switch: Fan switch -Item No.: 559 074 59 -Quantity: 10 available -Price: per piece -Dimensions: 105/65/H30 mm -Weight: 0.1 kg/pc.
5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve -Manufacturer: MAC Valves, solenoid valve -Type: 56C-16-611JB -PN: 25 -150 PSI / 1.7 - 10 bar Voltage: 24 V -Dimensions: 190/140/H130 mm -Weight: 1.2 kg
Transnorm Rising falling Incline belt conveyor GF 7750-600-500 RA2054 Technical data: Conveyor length (NL): 7750 mm (4150 mm + 3600 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R32DT71D4BMG Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7750 Nominal / outs ...
Lippert belt conveyor GF 3220-650-500 RA1466 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3220 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of construction: 20 ...
PLC controller, central assembly, RAM, CPU, central processing unit, central device -Manufacturer: Siemens, SIMATIC S7-1500 CPU 1515-2 PN -Type: 6ES7 515-2FM02-0AB0 -CPU: 1515-2 PN -Quantity: 3x assembly available -Price: per piece -Dimensions: 125/70/H155 mm -Weight: 0.5 kg/pc.
Row limit switch, push button, limit switch, cam limit switch -Condition: unused -Number: 25x row limit switches available -Price: per piece -Dimensions: 120/85/H70 mm -Weight: 0.8 kg
Workbench, work table, assembly bench, assembly table, work table -Workbench: solid construction -Worktop: Steel plate, length 2085 mm -Base cabinet: 4 doors / 5 drawers / Layout/height see photos -Transport dimensions: 2085/570/H1105 mm -Weight: 251 kg
arm length: 5000 mm weight max. in kg: 500 kg swivelling range: Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.35 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer for sale our Trumatic 5000R laser punching press. The machine is used and in very good condition. Basic data from the nameplate: Max cutting force: 220 kN Type 9121 No. 090038 Year of manufacture: 2001, spare parts Network: 400 V/50 Hz Connected load: 29kVA Supply voltage: 400V Ujznvnkmpx Control voltage: 24V= Necessary protection: 3x50A Compressed air connection: 7-14 bar Machine weight: 17500kg Main features of the machine: - Tool rail - 21 tools and 4 handles - Work surface 3070x1660mm - Max. sheet thickness 8mm - Axis of rotation of the tool head C1 and C2 - Form function - Thread function - Multibend function - Pneumatic press - Automatic sliding of details 500x500mm - Water-cooled servo motors Additional equipment of the machine: -Light barrier Softpunch function - Details of the slide sensor - Device for blowing out small details - Chi ...
Key data: 1300 KW, 400 V
Siemens Biogas generator with heat coupling. Brand; Siemens Type; SG-56HM Fuel; Biogas YoM; 2019 Hours; 38.000 (Total overhauled at 36.200h) Voltage; 400V RPM; 1500RPM Freq; 50Hz Can be delivered with Heat exchange platform, exhaust gas cooler, remote control cabinet, roofhoods, GCB panel, Tranformator, GCS control cabinet, gas pretreatment, gasfans, drycoolers (LT & HT) Direct available! Jenbacher,MWM,MAN,MTU,Guascor,Perkins,Cummins, Siemens, CHP, Power generator, Biogas , Waukesha
throat: - mm tool adaptor: - power requirement: - kW weight of the machine ca.: 70 kg dimensions of the machine ca.: ? m Articulated spindle drill head with 8 spindles Maximum pitch circle diameter 200 mm, Minimum spindle distance 41 mm, Height connecting flange/spindle end : 570 mm, Gear ratio 1:2, Weight approx. 70 kg Drilling capacity 22 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 1000 mm -Depth: 500 mm -Height: 1880 mm -Door: lockable, without lock -Weight: 98 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 950 mm -Depth: 500 mm -Height: 1950 mm -Door: lockable, without lock -Weight: 84 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 1115 mm -Depth: 500 mm -Height: 1950 mm -Door: lockable, without lock -Weight: 90 kg
Jack, support jack, lifting stand, bottle jack, mechanical lifting stand, axle jack -Lifting jack: Spindle jack -Type: unfortunately without a type designation -Height: 330 to 545 mm -Quantity: 1x lifting jack available -Dimensions: 240/140/H330 mm -Weight: 8.6 kg
Pressure press FAG TP-510, machine number 10461, complete, electric drive motor, in good condition, immediately available We have 9 more pressure presses in stock. Please send us an inquiry. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Powder curing furnace 3,500 x 1,900 x 2,000 mm electric 1 Inner dimension length 3,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m³/h 10 electric motors 1 pc 3 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 58 kW 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heater electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is electrically heated 15 Exhaust air 1 pc device for exhaust air pipe, manual flap ...
Crankcase for MWM RHS 518 A, 8 cylinders for sale. Housing is in very good, used condition, see detail photo. Previously used as an emergency power generator with few operating hours. Part Number: 26.01-82/04 26.01-82/34 E 26.100-142/04 26.100-142/34 E
Powder curing furnace 3,500 x 1,900 x 2,000 mm gas operation 1 Inner dimension length 3,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m³/h 10 electric motors 1 pc 3 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal output 58 kW = 49,880 kcal/hour 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set of stainless steel INOX with heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc. stove is heated by gas burner. 15 Exhaust air 1 pc device for exhaust air pipe, m ...
Powder curing furnace 4,500 x 1,900 x 2,000 mm electric 1 Inner dimension length 4,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 2 pcs. 2x 5,700 = 11,400 m³/h 10 electric motors 2 pcs 2x 2.2 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 74 kW 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heater electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is electrically heated 15 Exhaust air 1 pc device for exhaust air ...
table diameter: 500 mm table load: 0,4 t table height: 160 mm total power requirement: 0 kW weight of the machine ca.: 0,18 t dimensions of the machine ca.: 0,70,80,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Voltage tester, Duspol, voltmeter -Manufacturer: Wobla, voltage tester -Voltage range: 220-660V 0.05-0.25A / 110-750V 0.2-1.5mA -Number: 55x voltage testers available -Price: per piece, minimum order quantity 2 pieces. -Dimensions: 260/100/H40 mm -Weight: 0.3 kg/pc.
Flame cutting system, torch, oxyfuel cutting system, cutting torch, welding torch, hand cutting torch, welding kit -Manufacturer: WMW, Hand cutting torch cutting insert with lever valve -Type: 520/1 EN ISO 5172 -Number: 6x cutting torches available -Price: per piece -Dimensions: 465/100/60 mm -Weight: 1.1 kg/pc.
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 2 doors, solid construction with 1 shelf -Width: 560 mm -Depth: 420 mm -Height: 890 mm -Shelves: See photos for layout/height -Door: lockable, without a lap -Weight: 47 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Toolbox: Transport box, heavy-duty design -Width: 890 mm -Depth: 550 mm -Height: 495 mm -Lid: lockable, without lap -Weight: 67 kg
Guide cylinders, pneumatic guide cylinders, pneumatic cylinders, compact cylinders -Manufacturer: Festo, guide cylinder type DFM-20-20-B-PPV-A-GF 532316 -Piston: Ø 20 mm -Stroke: 20 mm -Sliding guide -Number: 2 cylinders available -Price: per piece -Dimensions: 110/85/H35 mm -Weight: 1.0 kg/pc.
Guide cylinders, guide pneumatic cylinders, pneumatic cylinders, compact cylinders -Manufacturer: Festo, guide cylinder type DFM-20-30-B-PPV-A-GF 532316 -Piston: Ø 20 mm -Stroke: 30 mm -Sliding guide -Number: 2 cylinders available -Dimensions: 116/83/H36 mm -Weight: 1.1 kg/pc.
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders, compact cylinders -Manufacturer: Festo, compact cylinder type ADNGF-25-30-PA 554234 -Stroke: 30 mm -Piston: Ø 25 mm -Piston rod: Ø 10 mm -Quantity: 1 cylinder available -Dimensions: 83/40/H40 mm -Weight 0.3 kg
drivers seat, forklift seat, tractor seat, tractor seat -Manufacturer: Klepp, drivers seat with suspension -Type: unfortunately without a type designation -Adjustable rails: with hand lever -Weight adjustment via handwheel -Dimensions: 500/470/H560 mm -Weight: 20 kg
Solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, switching valve, pressure build-up valve -Manufacturer: Festo, switching-on valve -Type: MS6-EE-1/2-V24-S 527682 -Operating pressure: 4 - 18 bar -Quantity: 1x valve available -Dimensions: 180/100/H290 mm -Weight: 1.3 kg
Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 560 mm -Bolt circle: Ø 170 mm -Through hole: Ø 90 mm -Reference: Short cone 8 (Ø 136-139 mm) -Dimensions: Ø 560 x 200 mm -Weight: 77.3 kg
Strapping machine, packaging machine -Through hole: 500 x 500 mm -Strapping band: 5 mm -Core diameter: 60 mm -Coil width: 120 mm -Pressing the pedal triggers the automatic strapping.
Square, locksmithsquare, hair square, precision hair square -Angle stop: Leg length 510 x 250 mm -Dimensions: 510/250/H40 mm -Weight: 2.3 kg
Stop square, locksmithsquare, hair square, precision hair square, control square -Manufacturer: Horex, stop square DIN 875/2 -Type: 1000 x 500 mm -Accuracy level: 2 -Quantity: 5x angle brackets available -Price: per piece -Dimensions: 1010/500/H50 mm -Weight: 7 kg/pc.
Angle bracket, locksmithsquare, flat angle -Flat angle: Leg length 1000 x 500 mm -Quantity: 4x flat angles available -Price: per piece -Dimensions: 1000/500/H9 mm -Weight: 5.3 kg/pc.
Builder: DOPPSTADT Model: AK 550 MEGA Engine: MERCEDES BENZ 317 kW (425 HP) Data: L. 9.200 mm x W. 2.500 mm x H. 2.950 mm (NO DISCHARGE BELT) Year: 1994 Hourly Production: 140 m³/h Shredding System: 36 HAMMER Fuel Tank: 300 L Weight: 21.000 kg
Square, locksmithsquare, hair square, precision hair square -Angle angle: Leg length 585 x 400 mm -Quantity: 3x angle brackets available -Price: per piece -Dimensions: 632/400/H35 mm -Weight: 6.3 kg/pc.
Square, locksmithsquare, hair square, precision hair square -Angle angle: Leg length 500 x 330 mm -Quantity: 3x angle brackets available -Price: per piece -Dimensions: 510/330/H50 mm -Weight: 4 kg/pc.
Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, shock absorber type DYSW-12-20-Y1F 548075 -Stroke travel: 20 mm -Number: 16 dampers available -Price: per piece -Dimensions: Ø 16 x 112 mm -Weight: 0.1 kg/pc.
capacity 90 degrees: round: 500 mm capacity 90 degrees: square: 420 mm : 600x400 saw band length: 5320x34x1,1 mm band speed: 15 - 100 m/min table height: 805 mm total power requirement: 3,0 kW weight of the machine ca.: 1,45 t dimensions of the machine ca.: 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload s ...
Year of manufacture 1997 Foil Packing Machine Angle welding machine Manual installation Shrink tunnel Mobile substructure Price on request. We deliver and install worldwide!
maximum number of results exceeded
please refine your search
