5 axis machining used for sale

Key data: 750 mm, 800 mm, 850 mm

Spindle speed (max.): 15,000 revolutions per minute Spindle speed (min.): 50 revolutions per minute Rapid traverse X-axis: 60 mm/min Rapid traverse Y-axis: 60 mm/min Rapid traverse Z-axis: 60 mm/min Weight: 16,000 kg Equipment: Documentation/Manual Subject to technical error and prior sale

Key data: 510 mm, 510 mm, 510 mm

Inv. Num. : 7409 Type: ARROW 500 Producer: CINCINNATI MILACRON Created: 1996 Parameters: Control system: ACRAMATIC A 2100 Number of stacking positions: 21 Work table length: 700 mm Work table width: 520 mm Maximum table load (uniform): 350 kg Maximum vertical spindle speed: 6000 1/min X-axis travel: 510 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cone: CAT 40 Machine height: 2650 mm Machine length: 2700 mm Machine width: 2000 mm Machine weight: 3050 kg Equipment: Tool Holder

Key data: 1050 mm, 530 mm, 510 mm

Control Mazatrol ... MATRIX 2 Clamping table surface ... 1300x550mm Axis X ... 1050mm Axis Y ... 530mm Axis Z ... 510mm Spindle speed... 10-12000r/min. controlled axes ... 3 cooling... 15bar ISO 40 Max. table load ... 1200kg Magazine slots ... 30 Machine weight ... 7700kg The machine is in good condition, possible to test under electricity.

Key data: 1050 mm, 540 mm, 510 mm

Machine Details Stock-No. 1105-04012 Type of machine Machining Center - Vertical Make DOOSAN DAEWOO Type DN 500 Year of manufacture 2008 Type of control CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time IMMEDIATELY Freight basis Ex works Technical details longitudinal 1020 mm cross 540 mm vertical 510 mm Tool Changer 30 Pos. max. tool length 300 mm max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm Rapid Traverse 36 m/min weight of the machine approx. 7 t power capacity at 100 % load 11 kW power capacity at 40 % load 18 kW turning speed range 12000 1/min tool taper SK 40 table surface area 1200 x 500 mm groove width 18 mm Number of noches 4 St. Additional information direct measuring system, El. handwheel, internal coolant supply package (chipconveyor, cooling trought the spindle, 12,000rpm spindle) fanuc SERIES  ...

Key data: 650 , 500 , 450

CNC controller: FANUC Professional 3 Axes X-axis travel mm: 650 Y-axis travel mm: 500 Z-axis travel mm: 450 Distance spindle nose - table surface mm: 150 - 600 Worktable Table dimensions mm: 1.000 x 450 Max. workpiece weight kg: 400 Spindle Spindle speed rpm: 12.000 Spindle drive power kW: 18/22 Tool system Tool holder: ISO 40 Tool magazine slots: 20 Equipment Chip conveyor various rigid tools High pressure pump Basic machine dimensions / weight Length mm: 2.355 Width mm: 3.447

Key data: 350 mm, 550 mm, 510 mm

Year of construction 07-2017 Mazatrol Smooth X Control Travel range: X-axis: 350 mm Y-axis: 550 mm Z-axis: 510 mm Swivel range A-axis -120° / +30° C-axis swivel range ±360° Max. spindle speed 12,000 rpm Tool magazine with 30 tool positions SK-40, DIN69871 Maximum workpiece height 350 mm Max. distance from spindle nose to top edge of table (horizontal) 560 mm Min. distance spindle nose to top edge of table (horizontal) 50 mm Max. distance spindle nose to table center (vertical) 550 mm Min. distance spindle nose to table center (vertical) 40 mm Max. table load 200 kg Air Blow Out Milling Spindle Maza-Check Mazak Monitoring B, Renishaw RMP 600 High-pressure coolant through the spindle, 15 bar Synchronized Tapping 5-axis simultaneous machining Preparation of chip conveyor, ejection left (without chip conveyor) Height 2,840 mm Width 1,900 mm Length 3,060 mm  ...

Key data: 1 mm, 530 mm, 510 mm

1 pc Vertical CNC Machining Center MAZAK Model VCN-530C Year of construction 2017 Mazatrol SmoothG Control Travel: X-axis: 1,050 mm Y-axis: 530 mm Z-axis: 510 mm Table: 1,300 mm x 550 mm Max. table load 1,200 kg Max. spindle speed 18,000 rpm Tool magazine with 40 tool positions SK-40, DIN69871 Rapid traverse X/Y/Z 42 m/min Distance between table top and spindle nose 150 mm – 660 mm Distance between the top of the stand and the spindle centerline 586 mm Cooling by the spindle Direct Encoder System - Glass Scales Tool length measurement Mazak Monitoring System B, incl. Renishaw OMP60 probe Chip conveyor, ejection left, Mayfran Cover rinse High pressure pump, 15 bar CE mark Documentation

Key data: 1050 mm, 530 mm, 510 mm

Inv. Num. : 7734 Type: VCS 530 Producer: MAZAK Created: 2015 Parameters: Control system: MAZATROL MATRIX 2 Work table length: 1300 mm Work table width: 550 mm Number of synchronized axes: 3 Maximum table load (uniform): 1200 kg Number of stacking positions: 30 Speed: 10-1000 1/min X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel (spindle and pinola): 510 mm Cone: ISO 40 IKZ: 15 bar Machine weight: 7700 kg Equipment: Tool probe Workpiece Probe Oil Mist Separator IKZ Oil mist extraction Number of pallets: 2

Key data: 1 mm, 530 mm, 510 mm

Mazatrol Matrix 2 Control Travel X: 1050 mm Y: 530 mm Z: 510 mm Table size: 1,300 x 550 mm Max. table load: 1,200 kg Rapid traverse: X/Y/Z 42 m/min Spindle motor: AC 18.5/11/7.5 kW Max. spindle speed: 12,000 rpm Spindle cone: SK-40 Week changer with 30 stations Preparation of Mazak Monitoring System B, Renishaw measuring system Tool Length Measurement, Renishaw TS27R Cooling by the spindle, 15 bar Cover Conditioner Chip conveyor, ejection left

Table dimensions: 1.300 x 570 mm Courses (X/Y/Z) 1.050 X 570 X 510 mm - Number of tool stations: 30 - Rapid Traverse (X x Y x Z): 36 x 36 x 30 mm/min - Max. spindle speed: 12.000 rpm - Operating hours: 5.456 - Axes: 3

- Auto power-off - Air blower - Chip conveyor - Spindle cooling (oil cooler) - 30 ATCs - Travel (X x Y x Z): 1.020 x 540 x 530 mm - Control: Fanuc 18iMB - Max. spindle speed: 12.000 rpm - Spindle type: BT 40

Key data: 710 mm, 610 mm, 660 mm

Mazak FH 5800 with 10 Pallet Palletech Horizontal machining centre with Palletech CNC control Mazatrol Fusion 640M Pallet table size 500 x 500 mm Number of pallets 10x Table load 500 kg X-axis travel 710 mm Y-axis travel 610 mm Travel Z-axis 660 mm Indexing of the table 360 x 1° Spindle taper DIN 69871A Spindle speed 35 - 15,000 rpm Magazine capacity 120 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Key data: 880 mm, 730 mm, 730 mm

GENERAL Project No.: 905698 Quantity: 1 pcs. Manufacturer: DMG MORI Type: NHX 5000 Control: Siemens 840 D solutionline Year of Make: 2016 Condition: Used machine Approx. (hrs): 26,341 Spindle in approx. (hrs.): 9,666 DESCRIPTION MILL Travel in X 880 mm Travel in Y 730 mm Travel in Z 730 mm Max. rapid traverse speed in X/Y/Z 60/60/60 m/min Max. feed speed in X/Y/Z 6/6/6 m/min Tool holder HSK 63 Max. speed milling spindle 20000 1/min Max. power at ED 10-40/100% 15/11 kW Tool magazine 40 stations Rotating pallet changer (set-up station can be rotated by motor) 2-fold Max. workpiece weight per pallet 500 kg Rotary table NC-controlled Clamping hydraulics OTHER EQUIPMENT IR Workpiece Probes Tool breakage detection by means of a probe Splash protection cladding with fully encapsulated working area Rotating viewing window Lighting in the work area Scrap ...

x-travel: 710 mm y-travel: 510 mm z-travel: 510 mm Control: Mazatrol M 32 size of pallet: 500x500 mm spindle taper ISO: 40 turning speeds: 50-10000 U/min Spindle capacity: 7,35 KW tool magazin:: 60 Cooling through the spindle: bar numbers of pallets: 6 total power requirement: kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis DOOSAN DNM 5700 was manufactured in 2017. It features an X-axis travel of 1050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a powerful 18.5 kW spindle and a table size of 1300 × 570 mm, allowing for efficient machining operations. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details.

This 3-axis Matsuura LV-500 was manufactured in 2017. It features a maximum spindle speed of 46,000 rpm and a robust table size of 540 x 350 mm with a maximum table load of 100 kg. The machine is equipped with a tool magazine capacity of 10 tools and rapid traverse rates of 90 m/min. If you are looking to get high-quality machining capabilities, consider the Matsuura LV-500 vertical machining center we have for sale. Contact us for further details.

This 4-axis MORI SEIKI NV-5000α1/40 was manufactured in 2006. It features an X-axis travel of 800 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1,100 × 600 mm with a maximum table load capacity of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NV-5000α1/40 vertical machining centre we have for sale. Contact us for further details.

This 4-axis Matsuura H.PLUS-500 was manufactured in 2008. It features a continuous table with 7 ground pallets, X, Y, and Z-axis travels of 800 mm, and a B-axis with 360° continuous indexing. The machine has a maximum workpiece diameter of Ø850 mm and a maximum workpiece height of 1050 mm. If you are looking to get high-quality machining capabilities, consider the Matsuura H.PLUS-500 horizontal machining centre we have for sale. Contact us for further details.

2023 Haas UMC-500SS 5-axis vertical machining center Manufacturer: Haas Year: 02/2023 In production: 11/2023 X: 610 mm Y: 406 mm Z: 406 mm B: 120’ to 35-‘ C: 360’ Spindle speed: 12000 rpm Spindle taper: CT 40 Toolholders Vise Machine in very good condition, under power. Find more here - / Contact us at -

Key data: 730 , 730 , 850

CNC controller: FS-31IA (MSX-701 III) Axes X-axis travel mm: 730 Y-axis travel mm: 730 Z-axis travel mm: 850 Rapid traverse m/min: 50 Distance spindle nose - table surface mm: 100 – 830 Acceleration in the axes m/s2: 9.8 (X), 10.8 (Y), 6.9 (Z) Worktable Number of pallets: 2 Table dimensions mm: 500X500 Maximum workpiece size (D x H) mm: 800 X 1000 Max. workpiece weight kg: 500 APC time s: 7 División estandar Grados: 0.001º Maximum workpiece rotation diameter mm.: 800 Spindle Spindle speed rpm: 14.000 Spindle drive power kW: 22/18.5 Tool holder: HSK A63 Bearing Inner Diameter mm.: 40 Spindle torque Nm: 220 Tool system Tool magazine slots: 120 With free neighboring places mm: 140 With occupied neighboring places mm: 70 Max. Tool Length mm: 500 Max tool weight kg: 12 Tool-to-tool time s: 0,9 Chip-to-chip time s: 3,3 Tool Shanks : BT-40 NUMBER OF TOOL OFFSE ...

Key data: 1050 mm, 510 mm, 560 mm

Mazak MTV 515/40N CNC Vertical Machining Center CNC Control: Mazatrol 640M Table size: 1300 x 550 mm Table load: 1500 kg X-axis travel range: 1050 mm Y-axis travel range: 510 mm Z-axis travel range: 560 mm Spindle taper: MAS BT 50 Spindle speed: 25 - 6000 1/min. Magazine capacity: 30 positions Machine weight: 8900 kg If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Key data: 730 mm, 730 mm, 740 mm

Mazak HC Nexus 5000-ll CNC Horizontal Machining Center CNC Control Mazatrol Matrix Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 KG Travel X-Y-Z axes 730x 730x740 mm Table Indexing 0.001° Spindle taper DIN 69871A-40 Spindle speed 18,000 1/min Spindle motor 35-26 kW Mazgazin capacity 80 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

Key data: 1020 mm, 510 mm, 510 mm

Machine Details Stock number 1105-04058 Machine Type Machining Center - Vertical Make DOOSAN DAEWOO Type MYNX 540 Year of construction 2002 Condition Control type: CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time IMMEDIATELY Ex-works freight base Technical details longitudinal 1020 mm landscape 510 mm vertical 625 mm Tool Changer 30 Pos. max. tool length 250 mm max. tool diameter 80 mm max. tool diameter. with a free neighboring box. 130 mm Rapid traverse 30 m/min Machine weight approx. 7 t Drive power 100% ED 15 kW Drive power 40 % ED 13 kW Speed range 8000 1/min Tool holder SK 40 Table surface 1200 x 500 mm Permissible load (centre of the table) 800 kg Information FANUC 21 M B El. Handwheel Conveyor 8000 RPM 30 SPEED ATC BT 40

Key data: 730 mm, 730 mm, 740 mm

Mazak PFH 5800 (10 Pallet) CNC Horizontal Machining Center CNC control Mazatrol 640M Pallet table size 500 x 500 mm Number of pallets 10 Table load 700 kg X-axis travel 730 mm Y-axis travel 730 mm Z-axis travel 740 mm Table indexing 360 x1° Spindle taper CAT 40 Spindle 12,000 1/min Spindle motor 22/15 kW Magazine capacity 80 Required footprint 9850 x 10145 mm If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

5-axis machining center Mori Seiki NHX 5000 Year of construction 2011 (bought new in 2013) Hours10768 Processing time 7172 hours Electricity one hour 29288 With few operating hours, used only for single part to small series production, mainly for special mechanical engineering The specifications are as follows: Travels: Cylinder Ø 500 x 700 Control M730BM (Mapps2) Speed 10,0000 rpm. Tool holder SK40 DIN 69871 Tool changer 60-fold Pallet changer 2-fold Accessories: Documentation Internal cooling Knoll 50 bar Conveyor Activation to 400 tool positions Pine pallet with long zero point clamping system Lang tensioning tower approx. 100 pieces of tool holders SK40 An on-site inspection is possible at any time by appointment.

x-travel: 800 mm y-travel: 500 mm z-travel: 510 mm total power requirement: 60 kW weight of the machine ca.: 10 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 500 mm z-travel: 510 mm total power requirement: 60 kW weight of the machine ca.: 10 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 400 mm z-travel: 350 mm total power requirement: 40 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 630 mm, 620 mm, 710 mm

ÖKK HP 500S CNC Horizontal Machining Center CNC Control Fanuc 160is-MB Pallet table size 500 x 500 mm Number of pallets 2x Table load 400 kg X-axis travel: 630 mm Y-axis travel: 620 mm Travel Z-axis: 710 mm Table Indexing 0.001° Spindle Heads MAS BBT40 Spindle speed 100 - 12,000 1/min Spindle drive 11/7.5 kW Number in Stacks: 60 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock. We are selling this machine at a special price, called "as seen". This means that we do not check the condition of the machine.

Travel (X / Y / Z) 1,524 mm / 660 mm / 610 mm Table size 1,676 × 660 mm Table load Up to 2,000 kg Spindle holder SK50 DIN 69871 Speed range up to 8,000 rpm Spindle power 22 kW continuous power (30 min. to 26 kW) Coolant by spindle Number of seats standard: 30 Iiebtfbewt N Nhj Tpmsc Tool weight max. 15 kg Tool length max. 300 mm Tool diameter max. 125 mm (if the adjacent space is empty), otherwise 75 mm Rapid traverses (X/Y/Z) 30 / 30 / 24 m/min Machine weight approx. 10,000 Control Hurco WinMax / Ultimax Installation area (L×W×H) approx. 5,600 × 3,900 × 3,300 mm

Max. X-axis stroke730 mm Max. Y-axis stroke730 mm Max. Z-axis stroke880 mm Max. workpiece diameter800 mm Max. workpiece height1,000 mm Max. workpiece weight700 kg Control & software SIEMENS

Mazak VTC-41 L X: 1660 - Y: 410 - Z: 510 mm CNC X-axis: 1660 mm Y-axis: 410 mm Z-axis: 510 mm Table dimensions: 2000 x 410 mm Max weight on the table: 800 kg Depth of throat (uprights-spindlecenter): 460 mm Admission in spindle (ISO): ISO 40 Power on the spindle: 11/7,5/5,5 kW Drilling-capacity: max dia 25 mm Tapping-capacity: max M24 Control : Mazatrol Number of axes: 3 axes Toolchanger: yes Number of rotations: 7000 rpm Length: 3900 mm Depth: 3050 mm Height: 2700 mm Weight: 6 ton

Chevalier X: 850 - Y: 510 - Z: 510 mm CNC X-axis: 850 mm Y-axis: 510 mm Z-axis: 510 mm Table dimensions: 1000 x 450 mm Admission in spindle (ISO): ISO 40 Power on the spindle: 7,5 kW Control : Siemens 810 Number of axes: 3 axes Toolchanger: yes Number of toolholders: 20 positions Number of rotations: 8000 rpm

Manufacturer: WEEKE Model: OPTIMAT BHT 500 Year of Manufacture: 2009 Technical Specifications: - Voltage: 400 V - Frequency: 50/60 Hz - Phases: 3 + N (three-phase with neutral) - Power Consumption: 45 kW - Current Rating: 100 A - Control Voltage: 24 V Find more here - / Contact us at -

Mazatrol 640 M Nexus Travel X-axis: 1,050 mm Y-axis: 510 mm Z-axis: 510 mm Distance spindle nose to table surface 150-660 mm Rapid traverse – feed Rapid traverse (X/Y/Z) 50 m/min Cutting feed speed: (X/Y/Z): 50,000 mm/min SK-40 DIN69781 Milling spindle Drive power: 30/22 kW Max. spindle speed: 15,000 rpm SK-40 DIN69781 Table size 1,300 x 550 mm max. table load 1,200 kg Tool magazine / ATC Number of tool positions: 30 Max. tool diameter: 80 mm Max. tool diameter with free adjacent space: 125 mm Max. tool length: 350 mm Max. tool weight: 8kg More options Cooling by the spindle Tool length measurement Mazak Monitoring System B, incl. Renishaw OMP60 probe Chip conveyor, – ejection left Cover rinse High pressure pump, 15 bar Made in Japan

Travel path X/Y/Z: 1630mm/860mm/760mm, speed: 8000rpm, torque: 142Nm, power: 15kW, tool positions: 40, max. tool diameter: 75mm/127mm, max. tool length: 300mm, max. tool weight: 10kg, table dimensions X/Y: 1680mm/890mm, max. table load: 2700kg. Machine dimensions X/Y/Z: approx. 6400mm/4400mm/3300mm, weight: approx. 14500kg, control: Hurco Ultimax 4, operating hours: approx. 621h. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026.

x-travel: . mm y-travel: . mm z-travel: . mm control: Mazatrol M-32 spindle turning speed range: 6000 U/min workpiece length - max.: 1300 mm workpiece width - max.: 550 mm workpiece height max.: 600 mm Workpiece mass max.: 1500 tool length - max.: 400 mm diameter of tools max.: D= 125 mm diameter of tools max.: freie Nachbarplätze D=260 mm Tol measurements: 20 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can f ...

Key data: 500 mm

Machine Type: CNC Machining Center/Milling Machine Manufacturer: AXA Type: VSC0-500 Year of Make: 1989 Condition: used Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-AXA-0825 DESCRIPTION We offer you a used CNC machining center from the manufacturer AXA. Available from week 37 / 2025. - Fourth axle - Tool holders - Plenty of spare parts and fourth axle from a sister machine Machine weight 3t more technical data will follow! Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

The machine is in good technical condition, testing is possible by prior arrangement.

A CNC 3-axis machining center Stama is available. Travel X/Y/Z: 1000mm/400mm/350mm, table dimensions X/Y: 1500mm/430mm, max. table load: 1200kg. Spindle power: 5.5kW, spindle taper: SK30, tool positions: 12, torque: 47Nm, spindle bearing diameter: 60mm, speed: 6000rpm. Positioning resolution: 0.001mm, positioning tolerance: +/-0.01mm, repeatability: 0.005mm, rapid traverse: 20m/min, feed rate: 5m/min. Drilling capacity (steel): 25mm, tapping capacity (steel): M24, milling capacity (steel) SK30/SK40/aluminum: 150cm³/180cm³/500cm³. Machine dimensions X/Y/Z: approx. 3200mm/2300mm/2500mm, weight: approx. 5500kg, control: Fanuc Series 0-M. Including C-axis and floppy disk drive. Without vises and tool holders (SK30). The cover of the Y-axis ball screw is missing. Documentation available. An on-site inspection is possible.

Year of construction: 2015 CNC controller: M-730UM Axes X-axis travel mm: 800 Y-axis travel mm: 530 Z-axis travel mm: 510 Distance spindle nose - table surface mm: 150-660 Feed rates m/min: 5 Rapid traverse m/min: 30 Worktable Number of pallets: 1 Table dimensions mm: 1100x600 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 30/22 (25%ED/cont) Spindle torque Nm: 304 Tool system Tool holder: MAS-BT 50 Tool magazine slots: 30 With free neighboring places mm: 240 With occupied neighboring places mm: 120 Max. Tool Length mm: 350 Max tool weight kg: 20 Tool-to-tool time s: 2.34 Equipment Chip conveyor Internal cooling lubricant supply 4th axis DDRT-260X Custom Macro common variables (200) Machine running times Under power: 35896 Spindle Working: 26915 Rated power kVA: 52 Basic machine di ...

Mazatrol Matrix Control Travel X-axis: 630 mm Y-axis: 765 mm Z-axis: 510 mm A-axis: +30°/-120° C-axis: 360° Max. distance from spindle nose to table top edge (table horizontal): 740 mm Min. distance between spindle nose and top of the table (table horizontally): 230 mm Max. distance from spindle nose to table center (vertical): 690 mm Min. distance from spindle nose to table center (vertical): 180 mm Max. table load: 500 kg Max. workpiece diameter: 730 mm Max. workpiece height: 500 mm Pallet Changer – Mazak Palletech System 6-fold pallet changer Pallet size: 500 x 500 mm Milling spindle SK-40 Max. spindle speed: 12,000 rpm Drive power milling spindle: 22Kw Tool magazine Number of tool positions: 120 Other equipment • 5-axis simultaneous machining • Synchronized tapping • Rapid traverse constant angle of inclination when moving 3D coordinate conversio ...

x-travel: 900 mm y-travel: 550 mm z-travel: 500 mm Control: FANUC 31i-b tool change unit: 30 pos. table-size: 1.000 x 500 mm table weight: 700 Kg spindle taper: HSK - A 63 number of spindle speeds: 20.000 U/min/rpm Spindle power: 22 Kw Working hours: 10.816 h Spindle hours: 2.352 h Internal cooling system: Distance between table and spindle: 150/690 mm chip conveyor: kW weight of the machine ca.: 9 t dimensions of the machine ca.: 2.530 x 2.900 x 3.064 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered is a Röders RXP 500 high-precision milling machine year 2005, approx. 160763h, spindle approx. 100000h incl. HSK-25 high-frequency spindle with 50000rpm, 42-fold chain magazine, HG sensor, high-accuracy option incl. spindle cooling as well as Renishaw probe, machine weight approx. 5500kg. Viewing is possible by arrangement.

x-travel: 400 mm y-travel: 450 mm z-travel: 350 mm Control: Heidenhein iTNC 530 : 68 fach tool adaptor: HSK 40E turning speeds: 30.000 U/min fixed table - dimensions: 300 x 400 mm mm workpiece weight: 200 kg pallet table size: 320 x 320 mm feed speeds autom. x/y/z: 40 m/min. spindle drive motor: 13 kW Number of working hours: 32369 h total power requirement: 16 kW weight of the machine ca.: 7.500 kg Machine still in the delivery factory: Condition: ready for operation: CE signed: Electric 380 Volt: Palett changer: 7-fach Cabin: Tool magazin places number: 68 High-speed 3-axis universal machining center with 7-station pallet changer. Operating hours: 44,899 hours. Load hours: 32,369 hours. Spindle time since replacement: 13,350 hours. Gantry-style machine with a solid monoblock polymer concrete construction, compact linear ball bearings, Heidenhain direct measuring system, hydraulic  ...

The machine is in good technical condition, after prior agreement it is possible to test it. Supported systems MAX4 with WinMax v8 Control language completely in Czech 3D simulation yes Programming type Dialog and NC TABLE Table dimensions 1,500 x 660 mm T-slots 6 x 18 mm Max. table load 1,350 Kg Distance between spindle face and table 150 - 760 mm TRAVELS X axis 1,270 mm Y axis 660 mm Z axis 610 mm A axis 360 SPINDLE Max. spindle speed 12,000 rpm Spindle power 18 kW Torque 237 Nm Spindle taper SK 40 TOOL MAGAZINE Number of tools 40 Max. tool diameter 75 / 125 mm Max. tool weight 7 kg FEED Rapid feed X/Y/Z 30 / 30 / 20 m/min Working feed X/Y/Z 15 m/min OTHER MACHINE DATA Dimensions W x D x H 3,250 x 2,220 x 2,950 mm Weight 9,400 Kg

This Leadwell LCH-500 Horizontal Machine Center was built in the year 2006. It is equipped with a Fanuc Series 0i-MC control unit and has 3 axis. The machine has a spindle speed of 10000 rpm and is in good condition.

This 4-axis Yida MH-500 horizontal machining center was manufactured in 2009. It features a spindle speed of up to 10,000 rpm, a pallet size of 500 × 500 mm, and a tool magazine with a 40-tool capacity. Ideal for high-precision machining with its LM linear guideways and rapid traverse rates. If you are looking to get high-quality milling capabilities, consider the Yida MH-500 machine we have for sale. Contact us for more information about this machine.