5 axis machining used for sale

LISTING ID: 22749 Brand: SCANIA Model: DI12 59M Power: 221 kW(300 pk) 1800 rpm Displacement: 11.7 L Bore x Stroke: 127 x 154 mm Dry Eight: 1130 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, drawer cabinet -Tool cabinet drawer cabinet sturdy design -2 drawers: layout/height see photos -Cabinet door: lockable -Number: 1x cabinet available -Dimensions: W x D x H 500/600/H 800 mm -Weight: 35 kg

Sideshift, side lift, forklift blade -Manufacturer: Kaup, sideshift type 1T151P2 from forklift Still EFG 1.5/5004 -Load capacity: 1600 kg -Stem dimension: 67 mm -Dimensions: 950/100/H600 mm -Weight: 78 kg

Bradley & Turton Upstroke Presses Tonnage: 50ton Electric Platens Double Daylight 15” (375mm) sq. platen Fully guarded With individual pump units

Incubator Manufacturer: Heraeus Type B 5090 E Glass Nominal temperature 70 °C, 220 volts

Lippert belt conveyor GF 24500-650-500 RA1462 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 24.500 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT-10 ENBU Year of construc ...

Double hose reel, reel, hydraulic hose reel, hose reel -Manufacturer: Hans H. Meyer, double hose reel from electric forklift Still EFG 1.5/5004 -Type: 7-21 -Dimensions: 280/200/H280mm -Weight: 9 kg

Gearbox, spur gear, angle gear, worm gear, adjustable gear motor -Manufacturer: VEB, type 10 UO-50x30 oLTGL 258/4 -Translation: i = 30 -Shafts: Ø 25 x 60 mm / Ø 14 x 30 mm -Number: 1x gearbox available -Price per piece -Dimensions: 200/180/H170mm -Weight: 9 kg/piece

LISTING ID 22412 BRAND: CATERPILLAR MODEL: 3412 POWER: 537 kW - 720 hp 1800 rpm RPM: 1800 CONDITION: Used Running Take Out Features Flywheel housing Governor Exhaust system Cooling system Starter / Panel Engine Mounts Weight (dry): 2459

Gearbox, spur gear, worm gear -Gearbox: Flat gearbox, unfortunately without type designation -Part No.: R 8 395-2 -Translation: 2-stage 1:8 / 1:2 counter-rotating -Shaft: Ø 45 x 55 mm / Ø 20 x 22 and 25 x 75 mm -Dimensions: 550/270/300 mm -Weight: 40 kg

Micrometer screw, outside micrometer screw, precision micrometer screw -Manufacturer: KS, Micrometer: Precision micrometer screw -Measuring range: 500-600 mm -Reading: 0.01 mm -Locking device -Standard: TGL 150 46 -other sizes: also available -Dimensions box: 880/545/H50 mm -Weight: 6.2 kg

New Part Number: 561 031 04 01 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

DMG CTX 510 ECO CNC turning center built in 2011 is used for precision machining of workpieces with a maximum diameter of 465 mm. This extremely efficient and perfectly optimised machine features a specially constructed, inclined bed that effectively dampens all vibrations and oscillations. This solution ensures the highest possible process stability, bringing results such as improved workpiece surface quality or increased cutting tool life. Workpiece machining is carried out using reliable components in the form of a high-speed spindle and cutting tools taken from a 12-position turret. Tools are changed in a very short time, so that the overall process time is significantly reduced. The DMG GILDEMEISTER CTX 510 ECO CNC lathe also features an intuitive SIEMENS CNC control and an integrated chip conveyor. The total weight of the machine is 7800 kg. Technical parameters of the DMG CT ...

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Holch MHS 501-Super water-cooled -Length: 6.35 m -Weight: 5.1 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve -Adapter sleeve: Morse taper sleeve MK6/5 -Type: IMFCM6/5STAS2293-65 -Dimensions: Ø 65/190 mm -Weight: 2.2 kg

RECON Part: ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, drawer cabinet -Tool cabinet Schäfer, drawer cabinet sturdy design -1 drawer/ 2 borders: Layout/height see photos -Cabinet door: lockable -Quantity: 1 piece available -Dimensions: W x H x D 500/500/1000 mm -Weight: 29 kg

Oil conveyor, hose reel, automatic hose reel, oil hose reel -Hose reel: Automatic oil hose reel -Hose length: 5400 mm -Dimensions: 400/200/H495 mm -Weight: 18.2 kg

fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, fan motor -Fan: axial fan axial fan -Motor: Type D 564 0.11 kW / 1350 rpm -Total dimensions: Ø 440 x 200 mm -Weight: 3.5 kg

measuring stand, tripod, dial gauge holder, test stand, dial gauge holder, dial gauge stand, magnetic measuring stand, dial gauge stand -Manufacturer: BYK, measuring stand type 5510 -Measuring scale: 0-1038mm/40 7/8 -Dimensions: 300/200/H1270 mm -Weight: 10 kg

tires, solid rubber tires, forklift tires -Manufacturer: Vorwerk Rota, solid rubber tires 3 pieces -Tire size: 18x7-8 rim 4.33 R-8 532/272-1 -Bolt circle: Ø 148 x 18 mm -Recess: Ø 110 mm -Price/Delivery: complete -Weight: 22 kg/piece

tires, solid rubber tires, forklift tires -Manufacturer: Solideal, solid rubber tires 2 pieces -Tire size: 23x9-10 RIM 6.50F-10 -Bolt circle: Ø 162 x 20 mm -Recess: Ø 110 mm -Price/Delivery: complete -Dimensions: Ø 465 x 200 mm/piece -Weight: 40 kg/piece

Agilent 7890A +5975C+7683(100 tray) with SSL + PTV inlet. And with pump. Agilent 7890A +5975C+7693(150 tray) with SSL + PTV inlet. And with pump. Both in very good condition.

2-component gun, multi-function gun, cartridge gun, cartridge press, battery gun, battery-powered cartridge press -Manufacturer: Meritool, cordless gun PowerPush 5026 Type 2 -Cartridge: 600 ml -Accessories: incl. battery 20 V, see photos -Dimensions: 630/80/H290 mm -Weight: 2.3 kg

DMG GILDEMEISTER CTX 510 CNC turning center was built in 2008. Designed for machining workpieces with a maximum diameter of 465 mm, the machine features a fully illuminated workspace, a high-speed spindle and high-end cutting tools. The extremely stable design combined with the perfectly optimised SIEMENS CNC control ensures maximum process efficiency, even during the most intensive production work. The DMG CTX 510 CNC lathe weighs 7500 kg. Technical specifications of the DMG GILDEMEISTER CTX 510 lathe - maximum turning diameter: 465 mm - maximum swing diameter: 680 mm - maximum swing diameter above cross guideway: 465 mm - maximum external diameter of clamped workpiece: 400 mm - feed in the X/Z axis: 300/1050 mm - rapid traverse in X,Z axis: 30 m/min - maximum spindle rotational speed: 3500 rpm - spindle passage: 97 mm - spindle drive power (40%/100% DC): 42/31 kW - chuck s ...

door closer, floor door closer, closing body -Manufacturer: Geze, floor door closer closing body type TS 500 NV -Art.No.: 0672-CPR-0121 -Dimensions: 270/70/H65 mm -Weight: 2.8 kg

energy chain, cable drag chain, energy guiding chain, cable chain, drag chain -Manufacturer: IGUS, energy chain cable drag chain -Length: 5530 mm -Width: 240 mm -Accessories: incl. U-clamps type CFX 12.1 / CFX 12.2 see photos -Transport dimensions: 1060/840/H245 mm -Weight: 26 kg

Motor clamping rails, motor clamping rails, motor clamping system, for electric motor, gear motor -Motor tensioning rail: 2 pieces -Groove width: 14 mm, length 380 mm -Hole spacing: 470 mm / Ø 14 mm -Delivery/Price: complete -Dimensions: 500/55/H72 mm -Weight 3.1 kg/piece

Motor clamping rails, motor clamping rails, motor clamping system, for electric motor, gear motor -Motor tensioning rail: 2 pieces -Groove width: 17 mm, length 400 mm -Hole spacing: 540 mm / Ø 14 mm -Delivery/Price: complete -Dimensions: 590/60/H83 mm -Weight 4.8 kg/piece

x-travel: 4.300 mm y-travel: 1.500 mm z-travel: 1.800 mm Control: HEIDENHAIN TNC 530 table-size: 5.000 x 2.250 mm T-slots: 9 T-slot - distance: 250 mm T-slot - width: 28 mm rapid traverse: 15.000 mm/min feeds: 10.000 mm/min milling head: 45° Automatisch UAD milling head: 0,1 º- 0,1 º conus- taper: ISO-50 DIN 69871 AD-50 number of spindle speeds: 60 - 6.000 U/min/rpm transmission ratio: 2 spindle drive: 28 kW Internal cooling system: 20 bar chip conveyor: Inkl. handwheel: Inkl. total power requirement: 36 kW weight of the machine ca.: 40.1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4 x valve block with interface module EX250-SDN1 and with 20 x solenoid valve SV2100R-5FU

Laser engraving machine with 60 watt laser power used demonstration machine - with minimum operating hours (approx. 20 hours) - 60 watt MOPA laser (enables colored laser engraving on stainless steel) - incl. 4th axis (rotary unit) - incl. Windows 10pro 64-bit PC system - incl. 22" screen - Everything is fully installed and adjusted - Engraving software in German - Very easy to use - Switch on and get started - Fiber laser source with 60 watts for high-contrast and fast Markings with extremely high resolution (see pictures) - Depth engraving up to 4mm possible (also in hardened steel) - Wobble function, e.g. for cleaning metal components - for engraving on many metals (stainless steel, brass, aluminium, etc.) and a lot of plastics - Heavy industrial quality - Complete system / ready for immediate use - Working space approx. 500 x 600 x 600mm (lxwh) - Clampi ...

Gearbox, Spur Gear, Angle Gear, Worm Gear, Movegear, Flat Gear, Flat Gear -Manufacturer: Rossi, spur gear from gear motor type MR 3I 50PC1A -Translation: i= 34.7 -Shaft: Ø 24 x 50 mm -Dimensions: 205/175/H190 mm -Weight: 9.7 kg

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

linear drive, linear gear, lifting gear, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, short-stroke linear slide -Manufacturer: Linear drive short-stroke linear slide -Type: 3 842 233 500 -Stroke: 35 mm -Dimensions: 180/60/H35 mm -Weight: 0.8 kg

Ultrasonic sensor, ultrasonic sensor -Manufacturer: Baumer, ultrasonic sensor -Type: UNAM 50U6121/S14 -Item No.: 102157S -Box dimensions: 140/90/H70 mm -Weight: 0.3 kg

planing lenght: 525 mm table surface area: 500 x 300 mm workpiece height: mm dimensions of machine L x W x H: 1,98 x 1,06 x 1,42 m Accessories: vice (width of jaws 200 mm) on rotary plate, vertical shaping device, tool clearing The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm, 400 mm, 300 mm

Year of manufacture 1985 with CNC control 432 The machine is in good condition, the second machine is available as spare part machine Two identical machines available !

Vernier caliper, caliper, vernier caliper -Manufacturer: Helios, caliper gauge with fine adjustment -Measuring range: 0-500 mm -Vernier: 0.05 mm -Dimensions: 655/230/H15 mm -Weight: 1.1 kg

Cylinder head overhauled, ready for installation 2 pieces in stock

Used Forming and Filling Machine RHEON, Type: Cornucopia KN-550 - Up to 100 product data can be stored - Product weight: 10 - 300g - Ratio between product weight and filling is freely selectable - Machine technically checked and cleaned - Condition: Used, ready to use Visits and test runs are possible by arrangement. An overhaul of the entire machine with warranty is also possible.

clamping plate, clamping table, clamping cube, press table -Clamping table: clamping plate for hydraulic press eccentric press -Clamping surface: 500 x 280 mm -Dimensions: see photo technical drawing -Dimensions: 500/280/H180 mm -Weight: 53 kg

collet chuck, tool holder, tool holder, milling chuck, milling tool -Collet holder: MK5 -Type: F BF 5d4-36 MK M20 -Clamping sleeve: Ø 15 mm -Total dimensions: Ø 90 x 250 mm -Weight: 4.4 kg

Motor control for an MWM 518A for sale. Other spare parts for the engine also available: -Starter -Turbocharger - Exhaust manifold with temperature sensors -Oil pump

MWM 518A turbocharger for sale. Other spare parts available: - Exhaust manifold with temperature sensors -Starter - Expansion tank -Water pump

Starter MWM 518A Bosch 0 001 402 065 24V, 4HP Other spare parts for the engine also available: -Engine timing -Turbocharger - Exhaust manifold with temperature sensors -Water pump

Exhaust manifold MWM 518A with temperature monitoring for sale Other spare parts for the engine also available: -Starter -Turbocharger -Engine timing -Water pump

# HIDROBRASIL 50 T Heating Press with Sliding Table (600x600mm) If the press does not exactly meet your requirements, please request an individual offer exactly according to your wishes with one click: HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! 50 T top piston heating press, in double column brackets suitable for continuous shift operation, with these basic data: - With a heating level - Idle speed up to 10 mm/sec (adjustable via rotary control) - Opening speed up to 40 mm/sec - Starting pressing speed 8 mm/sec - Table size/heating plate size 522 mm deep, x522mm wide - Plunger size/heating plate size 498 mm deep, x498mm wide - 2 heating plates, electrically heated, up to 200 degrees - Oil temperature monitoring - Circulating oil cooling on the hydraulics - Pressure Holding Valve 0 to 3600 sec - Pressure adjustment from  ...

Turbocharger for Deutz 545 for sale