127,865 used machines on RESALE, but how to find them? Machine Search
Analog module, brand new, CPX-4AE-P-D10, 560362, Original Festo, new Special price ! Attention: Original Festo product, no replica from.. The parts were taken from a brand new valve assembly in its original packaging and are completely as new. We still have several identical and many other Festo components, but the quantity is ending. Buy more than 1 position there is still a great discount. If you have a UID number, we will gladly issue an invoice without VAT. 12 months warranty We give you 12 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Aust ...
HBS 533 band saw new Engine: 1.5 KW/ 400 V Cutting height: 270mm Cutting width: 514mm Roll diameter 530mm Precision roller guide Band length: 3865mm Table inclination -10°-+45° Weight: 163kg
Electronic module, brand new, 533360, Original Festo, new Special price ! Attention: Original Festo product, no replica from.. Current market price: approx. € 94 Excl. VAT The parts were taken from a brand new valve assembly in ist original packaging and are completely as new. We still have several identical and many other Festo components, but the quantity is ending. If you buy more than 1 item you will get a great discount. If you have a UID number, we will gladly issue an invoice without VAT. 12 months warranty We give you 12 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms ...
Differential pressure gauge, A2G-15, -50/0/50Pa, Wika, mint condition -30% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Differential pressure gauge, A2G-15, -50/0/50Pa, Wika, - Output 4-20mA - Max. Pressure 20kPa 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court ...
approx. 5.500 pieces, folding box, Euro stacking container, Bekuplast, 600 x 400 x 285 mm, grey - used - : Price per item from location (net): Minimum purchase 3 pallets (min. 384 crates): only 6.-€ (net)! 9 pallets a (min. 1,152 pieces): only 5.- € (net) for complete acceptance: only 4.50 (net)! Manufacturer: Bekuplast Type: Clever-Retail-Box 56 ltr. 63843 Niedernberg Year of manufacture: unknown External dimensions: 600 x 400 x 285 mm (65 mm high when folded) Internal dimensions: 565 x 365 x 275 mm Sides and bottom closed coarsely ribbed sandwich base with welded panel in grey Colour: grey 401 Bottom: Sandwich floor Sides: closed Handles: open Material: PP-C (Polypropylene Copolymer) Industrial: Yes Weight: 2,955 kg 1 pallet packed approx. 2m high = approx. 128 crates, 1 pallet packed approx. 2.40m high: approx. 156 crates Condition: good, wit ...
Machine Type: CNC Lathe Manufacturer: GILDEMEISTER Type CTX 500 S2 Year of construction 1998 Control CNC Pilot Heidenhain Country of origin Germany Delivery time by arrangement Freight base from location Technical details Turning diameter max. 445 mm Turning length 1,000 mm Control CNC Pilot Heidenhain Circumferential diameter 680 mm Main spindle: Speed range – main spindle 18 - 3,600 rpm/-1 Drive power – main spindle 23 kW Max. torque 650 Nm Spindle nose 220h5 Chuck diameter 315 / 400 Spindle bearing diameter 140 mm Spindle bore 107 mm Tool turret: Number of tool positions 12 pos. Tool holder 40 DIN69880 Travel: x-travel 320 mm z-travel 1,097 mm Tailstock: Quill stroke 120 mm Tailstock mount MK 5 Quill pressure 14 kN Feeds: Rapid traverse X : 24 / Z : 30 m/min Feed force X: 8 / Z: 15 kN Total power requirement 58 kVA Machine weight approx ...
Product number: 1982 Type: Unicut 547 Serial number: 5435 Year of construction: 2006 Block size: max 1200 x 640 x 380 mm Cutting width: 680 mm Thickness: 10 - 60 mm Air pressure: 6 Bar, 500 L/min. Power: 3 x 400V, 50Hz, 15kW Dimensions: 3400 x 1300 x 2650 mm Weight: 2500 kg Type: Galan 930 Serial number: 5431 Year of construction: 2006 Product size: max 370 x 160 mm Product length: 6 - 130 mm Cutting set: 20 mm Belt width: 360 mm Air pressure: 6 Bar, 20 L/min. Power: 3 x 400V, 50Hz, 7kW Dimensions: 4350 x 1250 x 1700 mm Weight: 1000 kg
1998 3D Systems SLA 5000 BUILDING SIZE: 500X500X800mm YEAR OF PRODUCTION: 1998 CONDITIONS: PERFECTLY WORKING, CUSTOMIZED LASER, 218Mw (20.000 WORKING HOURS) LAST MAINTENANCE DONE LAST WEEK (WE CURRENTLY DO 1 MAINTENACE A YEAR BY THE SPECIALIZED TECHNICIAN)
Machine type MIG/MAG welding system Make OERLIKON Type Citomag 506 W Connection voltage 3 x 400 volts Adjustment range 30 - 500 Ampere Switching time 60 % ED at 500 amps 100% ED at 420 amps Current setting infinitely variable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feed gearbox gearboxed 4-roll gearbox Protection up to a maximum of 300 A = 32 A over 300 A = 63 A Dimensions L x W x H 1,050 x 630 x 1,050 mm Weight 237 kg Age approx. 20 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqm 1 piece pressure reducer argon with 2 pressure gauges 1 piece spare parts box kpl. Equipped 1 piece user manual ...
floor-plate length: 5000 mm floor-plate width: 1800 mm floor-plate height: 290 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
volt: 150 V ampere: 19 A weight: 20 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Product number: 1993B Type: GoldFryer TBM630/5000TH Serial number: 10050409 Year of construction: 2005 Belt width: 630 mm Frying length: 5000 mm Heating: thermic oil Power: 3 x 400V, 50Hz, 11kW Dimensions: 9100 x 1900 x 2900 mm Teflon infeed, hold down belt, circulation pump, electric hoists, oil level control, CO2 fire surpression system
Description mobile transfer BOGRAMA UEB 550 A with clocked blowing air and breakout station
Type: Engine, Type number: QST30-G2 GENERATOR 937,5KVA
Manufacturer: DANFOSS Type: VLT5350PT5CN1EXR1DLF00A00 Breakdown of the type designation: Model No.: VLT 5350 Suitable for engines up to 315 kW. PT5: Voltage: 500-690 V input voltage. CN1: Cooling option: Standard air cooling (internal). EXR1: Extension: Standard I/O modules (input/output). DLF00A00: Configuration: No additional modules or options installed. DLF stands for Danfoss Factory Load (standard version without customer-specific adjustments). Properties: Power range: 315 kW Voltage range: 500-690 V (suitable for high-voltage motors) Cooling: Air-cooled unit. Control: Ideal for variable speed control applications in high-performance engines.
Fuselage engine Actros OM 501 LA – Euro 5 – Type 541.976 It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation and installation as well as service around the engine optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.
We offer a highly productive 3D printer for industrial series production Trumpf TruPrint 5000 The 3D printer has already been dismantled by the manufacturer Disassembly logs are available as well as functional logs that prove that the machine was in operation before dismantling All axles are professionally secured The machine can be transported on a normal standard truck Faster to a high-quality 3D component The highly productive, semi-automated TruPrint 5000 3D printing system makes you fit for industrial series production. With features such as optional 500 °C preheating and Fullfield Multilaser equipment with three 500 watt TRUMPF fiber lasers, you are well equipped for highly demanding industrial applications. The machine manufactures high-quality components made of different metallic materials quickly and reliably – and at the same time meets the high quality stand ...
Semi-complete engine Mercedes Actros OM 501 LA – Euro 5 – Type 541.976/980 It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation and installation as well as service around the engine optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.
; Gross weight [kg]: 5033; Engine: Caterpillar C15; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 842
specifications: - Clamping area approx. 400 x 300 mm - Travel across x approx. 500mm - Travel along Y approx. 300mm - 2 Handwheels - Height 220 mm - 4 T - grooves 14 mm - Distance of the T - grooves approx. 72mm - Space required approx. W 1100 x D 900 x H 220 mm - Weight approx. 190 kg
Machine details Stock number 1105-03330 Machine type guide and pull spindle lathe Make ERNAULT-SOMUA Type Cholet 550 Year of construction 1990 Control type conventional Storage location FRANCE Country of origin France Delivery time immediately Freight base EX WORK price Technical details Turning diameter over bed 550 mm Turning diameter via support 500 mm Turning length 1100 mm Tip height 250 mm Spindle bore 52 mm Inner cone 136 Spindle speeds 32-1800 rpm Feeds - bed slide / lengthwise 0.05-07 mm/w Feeds flat slide 0.033-0.45 mm/min Total power requirement 13 kW Weight of the machine ca. 2,3 t Space requirement approx. 2870 x 940 x 1400 m Information accessories: PARAT steel holder 4 STUCK 3 bake lining dia 250mm 2 AXIS DIGITAL
used
Used creel, type I75/55 -outdated- Stock number: aga902 Passage: 750 mm Stroke: 550 mm Constructive structure: - Reinforced centre stand made of steel, stress-free cold formed - No cross beam on the incision side thanks to special Stand construction; thus easier saw attachment - Frame beams made of special steel, milled from a single piece - Profile stilts with rolling and cylindrical roller bearings and honing sleeves - Incl. clamp and stop Auto-BV Programmable cutting width adjustment with - Asymmetrical adjustment of the two saw packages (with type 71 with 4 saws, with type 75 with 5 saws per package), with synchronous adjustment of the splitting wedge knives - Control box with PLC control - Pushbutton box with TP operating terminal for convenient program input - Editing program display
Manufacturer: Arburg Type: 320 C 500 - 170 Year of construction: 11/2006 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 35 mm Lifting volume: 115 ccm / 105 gram PS Injection pressure: 1470 bar general Engine: 11 kW Heating: 9.4 kW Dimensions: 3.4 m x 1.4 m x 1.9 m Weight: 2430 kg Screen text: German Additional equipment Core train x1
PART NUMBER: 7521 Specifications: - inlet width 520mm - inlet height 180mm - shaft width 520mm - shaft diameter 400mm - number of knives 2pcs - sieve dimensions 100x100mm - toothed pulling shaft at the bottom - 2.2kW lower shaft motor - toothed pulling shaft from above - upper shaft motor 2.2kW - feeder length 4400mm - width of the feeding belt 500mm - feeder motor power 1.4kW - main motor 55kW - dimensions of the receiving feeder length/width 8050x880mm - belt width 600mm - dimensions of the machine with the feeding feeder length/width/height 6400x1900x1840mm - weight about 4500kg ADVANTAGES – made in Germany – with a belt feeder: infeed, outfeed – adjustable height of the take-up feeder – used chipper, very good condition Net price: 100000 PLN Net price: 23256 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)
Key data: 1100 , 198 , 40
Manufacturer: Krauss Maffei Type: KM 110 - 520 C2 Year of construction: 2003 Control: MC 4 Closing force: 1100 kN Closing type: Hydraulish Tie bar spacing: 470 mm x 470 mm Plate size: 745 mm x 770 mm Tool height: min 300 mm Opening distance: 600 mm Plate spacing max.: 900 mm Screw: 40 mm Lifting volume: 217 ccm Injection weight PS: 198 gram HP Injection pressure: 2377 bar general Engine: 18.5 kW Heating: 13 kW Dimensions: 4.5 m x 1.5 m x 2.2 m Weight: 6000 kg Screen text: German / English Additional equipment Robot interface Core train: x1 Accu
Maximum turnerable diameter: 1040 mm Turning diameter above the wagon: 620 mm Maximum workable length: 5200 mm Spindle power: 40 kW CNC ECS Optical line measurement system Maximum flow between tips: 10 tons Machine complete with chip evacuator, 4-position hydraulic turret, safety shelters in compliance and spindle 3-jaw hydraulic self-centering AUTOBLOCK; Various accessories available (tool case, stretchers, lunettes...) EC 2018 remarking possibility
The scope of delivery includes: 01x Surface-mounted shelf rack, used Material colour: hot-dip galvanised Total depth: approx. 2,520 mm (lifting rod direction) for double rows: 2x 1,100 mm Inner depth: approx. 2,517 mm Overall width: approx. 1,120 mm (crossbar direction) Bearing rod diameter: 30|1.50 mm Frame height: approx. 30 mm Mesh size: approx. 68 x 45 mm Weight | Pcs.: approx. 30,83 Kg Internal designation: GR-114 Note: The grating may have damage, scratches, dents, welds. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Main technical data: - Tip distance: 6000 mm - Tip height: 640 mm - Lathe complete with spindle, tailstock and tool turret
GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmWeight approx.11100 KgSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z730/730/880 mmPalett changer with2 PalletMaximum load (table centre)500 KgSwivelling range360 x 0,001 degreeTable size500x500 mmDrive power (100% DC)18,5 kWDimensions (L x W x H)3,1 x 4,86 x 2,84 m(For Europe) European(For Europe) European Edition (NHC5000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signal transmissioInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mou ...
Drilling capacity in steel (diameter): 80 mm Thread cutting in steel: M 80 x 4 mm Projection: approx. 500/2500 mm kl./gr. Distance between contact surface and drill pinole: 650/2300 mm Pinole stroke: 500 mm Table clamping surface: 1250 x 2800 mm Speeds: 9 - 1800 rpm Feeds: approx. 2 - 1250 mm Spindle drive: 7.5 kW Weight: 12000 kg Space requirement: 4000 x 1280 x 4100 mm
GeneralMilling Specification; Control: Control M730UM with CELOS CharacteristicsMax machining diameter278 mmDimensions (L x W x H)2,82 x 2,09 x 2,15 mDrive power tool spindle5,5/5,5/3,7 kWDrive power main spindle11/15/15 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeRotary tool spindle speed10000 rpmMovements X / Z260/590 mmNumber of tool stations12 Speed max.6000 rpmBar diameter max.52 mmSwing- Ø, max.755 mmMax. Turning Length192 mmWeight approx.4900 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-output spindle (Left Spindle) 15/ 11 kW, 6,000 min-1(Left Spindle) High-Output Spindle 15/11 kW (20/15 HP), 6,000 min-1 The NLX ...
Centrax ROLLS ROYCE 5 MW CX 501 KB7 Gas Turbine-Generator Package YEAR 2011 HOURS 40 000 Equipment List: Turbine/Alternator Housing and its complete contents including: • 1 Allison 501 KB7S DLE Gas Turbine - • 1 Alternator • 1 Epicyclic Gearbox • 1 Acoustic Enclosure • 1 Alternator Control Cabinet and Software • 1 Turbine Control Cabinet and Software • 1 Auxiliary Distribution Cabinet and Software • 1 Lubrication Unit including Oil Cooler • 1 Fuel Supply Circuit in Acoustic Enclosure • 1 Electro-Hydraulic Starting System- • 1 Compressor Cleaning System • 1 DC Power Supply • Battery Charger • Fire Protection and Gas Detection Circuit • Fan acoustic enclosure • Air cooler fan List of components: • Control/command panel and room and its complete contents • Filtration assembly and combustion air ducts • Filtration assembly, silencers and box ventilat ...
Car Charging Computer VAS 5908 Charging computer for car starter batteries (lead acid, Ge, AGM, fleece batteries) Battery charger / external power supply with MPC4 control board and nominal 14VDC charging voltage (suitable for 12VDC vehicle electrical systems / batteries) - 100% vehicle power supply suitability, protection of the on-board electronics / airbag - Use as a charger, external power supply and for vehicle supply in buffer mode (support during diagnostics / programming) - Extensive protection and self-protection functions - Short circuit and reverse polarity protection - Protective function in the event of battery defects - Safe spark suppression - Convenient menu navigation / loading parameters configurable - Built-in communication interface - Sealed housing, protected from internal contamination Housing version 'B': Advantageous for industrial production ...
CNC – controlled two-head double miter circular saw machine for the rational cutting of profiles made of aluminium – non-ferrous metals and various plastics. The machine can be used for single cutting – to saw the profile with two saw heads at the same time – or in automatic mode – here the two-head saw becomes a single-head saw The PKM 500 DG model is available in two versions – Version A – electrical / electronic miter adjustment of the saw heads, miter angle infinitely programmable between +/- 20°, CNC control with color graphics – profile drawings can be read as DXF file – remote maintenance via TeamViewer – software for wing cutting. Version B - pneumatic miter adjustment of the saw heads to preset stops, miter angle infinitely programmable between +/- 20°, CNC control with simple color graphics with the possibility to create cutting lists. Saw blade ...
Homogenizer LAB 12.50H, SN.1-84.195 Flow Rate 100 l/h at max. 600 bar Single-stage homogenizing valve with manual adjustment poppet valves, Main motor 2.2 kW, 400V, 50Hz
Ser.No.: 080700467 // Counter (m): 0.84 Format (mm): min. 120 x 148 (option 105 x 148) // max. to 350 x 500 Paper weight: 40 - 300 g/m² Equipment / Additional information: Hohner stitching heads Consist of: -Slitter Cutter Creaser -Inline Bookletmaker DBM 5000 -Auto Spine Master -DBM -500T
For sale is a used Markem Imaje large print printer 5800, which produces the printed image with wax. It is a conveyor belt and bracket for printer unit and controller. Print speeds of up to 178 meters per minute at approx. 200dpi resolution. Maximum print height per print head of 65 mm (print length flexible). Up to two print heads can be controlled; Print height up to max. 130 mm possible on one side, With Ethernet and USB interface / inputs and outputs freely programmable All-in-one printhead design for space-saving integration.Short heat-up phase max. 20 minutes. Colour touch display integrated in the controller. Printing costs according to Markem Imaje 1450ml = approx. 320 EUR, 400,000 layouts per year, 7267 ml necessary, annual costs of operating resources, estimated: 1,600 EUR Operating costs per tray, estimated: 0.004 EUR SAMPLE CALCULATION / SAMPLE LAYOUT
Key data: 400 KW, 500 kVA, 400 V
MODEL: EQ-C500400 ENGINE: Cummins KTA19-G3A FREQUENCY (HZ): 50 VOLTAGE (V): 400/230 POWER: 500kVA / 400kW STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 3800kg DIMENSIONS L/W/HEIGHT (MM): 350013501800 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your de ...
TWIN DISC MG 527 5.17:1 800 HP/ 596 kW 1800 rpm Brand: TWIN DISC Model: MG 527 Ratio: 5.17:1 Power: 800 HP (596 kW) RPM: 1800 RPM Used Running Take Out Features Flexible Coupling Type of drive: Spider SAE Housing/ SAE 0 Controls 18 inch, rubber block drive Aluminum ring Weight kg 1500 Dimensions (cm) 120x90x100
Reference Num.: 3527 Brand: MBO Type: T 500 Construction year: 1995 Available: directly Status: In production Location: Deutschland Equipment: - Format 50 x 70 cm
; Gross weight [kg]: 4200; Engine: Iveco CR13TE7W.S550; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Battery charger and coolant heater, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 800
Pasteur 500l/h Gas newly overhauled automatic temperature control
saw blade diameter: 500 x 50 mm cutting diameter: 180 mm turning speeds: 3000 U/min capacity 90 degrees: round: 180 mm capacity 45 degrees: round: 180 mm capacity 90 degrees: square: 150 x 150 mm capacity 45 degrees: square: 120 x 120 mm capacity 90 degrees: flat: 300 x 125 mm capacity 45 degrees: flat: 145 x 120 mm voltage: 400 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 430 Kg dimensions of the machine ca.: 0,8 x 0,7 x 1,3 m • Cold circular saw for aluminium, • with pneumatical double clamping of the workpiece, • clamping is adjustable horizontally and vertically, • equipped with mist lubrication, • adjustable saw blade feed, • additional roller conveyor: Height = 850 - 1200 mm, Width = 250 mm, Length = 1000 mm, with 4 posts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1090 mm turning diameter over slide rest: 690 mm turning length: 5000 mm spindle bore: 146 mm spindle taper: DIN 55027/15 turning diameter in the gap: 1250 mm bed width: 700 mm quick change tool holder: Größe D1 spindle turning speed range: 3,5 - 1000, stufenlos U/min feeds - longitudinal: 1-3000 mm/min feeds - cross: 1-3000 mm/min rapid travel - longitudinal/face: 6000 mm/min thread - mm pitch: 0,5 - 480 mm thread - inch: 60 - 1/16 Gang / inch. thread - module: 0,125 - 120 voltage: 400 V / 50 Hz main drive: 30 kW Control: total power requirement: 35 KVA weight of the machine ca.: 7,2 t dimensions of the machine ca.: 7,2 x 1,75 x 1,9 m • new heavy duty lathe with infinetely variable rotation speed via frequency converter, • at basic price with normal accessories according to list, • possible special acccessories according to separate make-up. The dat ...
maximum number of results exceeded
please refine your search
