5 axis machining used for sale

Paletchanger 2 tafels Hoge druk koeling 15 bar Schroottransportband Maximale werkstukafmetingen: 3240 x 880 x 640 mm X-axis: 3000 mm Y-axis: 800 mm Z-axis: 585 mm Table dimensions: 3240 x 750 mm Max weight on the table: 3 ton Passage between uprights: 860 mm Admission in spindle (ISO): ISO 50 Power on the spindle: 30 kW Control : Mazatrol 640 Toolchanger: yes Number of toolholders: 40 positions Number of rotations: max 6000 rpm Number of pallets: (2x) 750 x 3240 mm Length: 3274 mm Depth: 8100 mm Height: 3546 mm Weight: 19 ton

x-travel: 850 mm y-travel: 700 mm z-travel: 500 mm Control: HEIDENHAIN iTNC 530 rotary table: 800 mm c-axis: 0.001º ( ±360º) 0 B-axis (table): +25 / -110 º mm number of spindle speeds: 18.000 U/min/rpm tool taper: SK 40 DIN 69871 spindle drive: 15 kW max. torque on the spindle: 130 Nm Tools changer: 38 fach/tools Internal cooling system: 80 bar handwheel: HR- 410 total power requirement: 41 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I am selling an automatic CNC machining center for BLOCK-HOUSE production Hundegger K2i built in 2011. Almost new machine. Built in 2015. Under-table rotary saw with saw blade from 750 mm to 800 mm, 360° rotation, servo-hydraulic inclination 0–65° Universal 5-axis unit with round milling cutter, end mill and end mill, milling head diameter 350 mm x 100 mm end mill Combination holder for at least 5 tools with horizontal drilling device up to 2.5–3.0 kW power, maximum drilling diameter 24 mm, minimum drilling length 460 mm, minimum machining depth 300 mm Combination holder for at least 5 tools with horizontal drilling device up to 2.5–3.0 kW power, maximum drilling diameter 24 mm, minimum drilling length 460 mm, minimum machining depth 300 mm Positioning and clamping of the workpiece by means of gripper arms. While the workpiece is measured and transported to the d ...

The machine is in good technical condition, testing is possible by prior arrangement.

The machine is in good technical condition, after prior agreement it is possible to test it. 620 hours as new.

The machine is in good technical condition, testing is possible by prior arrangement. X=750, Y=650, Z=550, rotary table r=650 Rpm 20k, iTNC 640 system, only 26,500 hours on the spindle, 60 slots

Travel X/Y/Z: 700mm/630mm/700mm, max. workpiece dimensions X/Y: 750mm/700mm, pallet clamping surface X/Y: 500mm/500mm, max. pallet load capacity: 500kg, tool holder: SK40, feed rate: 50m/min, rapid traverse: 50m/min, positioning accuracy: +/-0.004mm, repeatability: +/-0.001mm, spindle speed: 12000rpm. Machine dimensions X/Y/Z: approx. 4000mm/3800mm/3000mm, weight: approx. 12500kg, control: Fanuc Series 21i-MB, operating hours: approx. 42400h, spindle hours: approx. 11500h. Includes Renishaw OMP 40-2, central lubrication, and 4 pallets. Documentation available. On-site inspection possible. Expected to be available from January 2026.

Year of construction: 2000 CNC controller: '3D contouring control Millplus Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) Feed rates m/min: 40 Rapid traverse m/min: 40 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1000 Max. workpiece weight kg: 1000 max. torque Nm: 7900 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40%ED/cont) Cooling Tank capacity: 600 Tool system Tool holder: CAT 40 Tool magazine slots: 60 Tool changer: Doeble gripper Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Preapared for RENISHAW sonde Accuracy package Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 33831 Spindle Working: 6328 Rate ...

Key data: 800 mm, 700 mm, 600 mm

Year of manufacture approx. 2002 CNC control MillPlus Plate changer Yes (2-fold) Swivel table No Tool magazine 60 places IKZ/HD cooling Yes Chip Conveyor Yes

Key data: 1600 mm, 1250 mm, 100 mm

Control: HEIDENHAIN iTNC 530 Spindle: 18,000 rpm, HSK-A63 Rapid traverse: 60 m/min | Working feed: 20–15,000 mm/min Table size: 1,500 × 1,250 mm (L × Q) Workpiece weight: up to 4,000 kg Table speed: up to 10 rpm Tool Magazine: 60 Slots Machine weight: approx. 34 t

Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 T ...

Key data: 1800 mm, 2000 mm, 1100 mm

Large 5-axis universal/gantry machining centre for heavy workpieces Technical key data (typical, depending on variants): Table/load capacity: NC rotary table approx. 1,700 × 1,400 mm, up to approx. 5,000 kg Head/table axes: Swivel milling head B 0–180°, C 360° (resolution up to 0.001°) Spindle: up to approx. 10,000 min⁻¹, HSK-A63 Tool magazine: usually ~60 places Control: often Heidenhain TNC 430 (built in 2003) Peripherals (common): IKZ/HD cooling, chip conveyor

Manufacturer: MECAL Model: MC304 Year of Manufacture: 2013 Type: ATLAS Type of Machine : 4-axis machining center Find more here - / Contact us at -

Key data: 900 mm, 500 mm, 500 mm

Offered here is a machining center from the manufacturer Emco Famup with 4th axis with tailstock. The machine is freely loaded onto trucks. Make: Emco Famup Type: EmcoMill E900 Year of Make: 2008 Control: Siemens Sinumerik 810D - ShopMill Specifications: Travel distances X-Y-Z: 900x500x500 mm Rapid traverse X-Y-Z: 24 m/min A-axis travel range: 3600.001° Fpjc Ha Isxrvrdoh U Hop Table clamping surface: 1000x520 mm Max. workpiece weight: 800 kg Minimum distance between vertical spindle and table: 100 mm Maximum distance between vertical spindle and table: 600 mm Tool magazine: 30 positions Tool holder: ISO 40 DIN69871 Spindle speed: max. 12000 rpm Spindle power: 13 kW Coolant supply through the spindle: 15 bar (IKZ - CTS) Total weight: approx. 5 tons Dimensions: approx. 4000x2400x2900 mm

Introducing the FEHLMANN PICOMAX 90-M Machining Center, a versatile solution crafted for precision and efficiency in industrial settings. Equipped with the advanced HEIDENHAIN iTNC 530M CNC controller, this machine offers remarkable axis travel of 700mm (X), 420mm (Y), and 610mm (Z), with feed rates ranging from 1 to 20 m/min. The robust spindle operates at speeds from 50 to 20,000 rpm. The substantial worktable measures 1,260 x 490 mm, optimizing space and functionality. This 2007 model includes valuable features such as a 3D infrared measuring probe, coolant system, oil mist extraction, and HSC settings. A 32-slot tool magazine and a sophisticated laser tool measurement system further enhance operability. Presently available, this machine supports intricate and reliable machining processes with precision.

Introducing the DMG MORI M1-PRO, a high-performance machining center crafted in 2021 for precision and efficiency. Equipped with the SIEMENS 828D OP CNC controller, it offers impressive X, Y, and Z-axis travels of 550 mm each, complemented by a rapid traverse speed of 24 m/min. The powerful spindle delivers speeds of up to 12,000 rpm, with a drive power of 13/9 kW and torque of 83/57 Nm. Its robust worktable, measuring 850x650 mm, supports a maximum workpiece weight of 600 kg. Additional equipment includes an electronic handwheel, chip conveyor, mist collector, coolant gun, and RENISHAW measuring probe. This machine, with 12,481 running hours, is in excellent condition and ready for deployment. Located and available for immediate acquisition.

The REIDEN RX14 Machining Center, constructed in 2014 and installed in 2015, offers advanced manufacturing capabilities with the HEIDENHAIN TNC640 CNC controller. It features extensive axis travel (X: 1,800 mm, Y: 1,800 mm, Z: 1,210 mm, A: -15° to +105°) and a rapid traverse of 40 m/min. The spindle delivers 15,000 rpm with a power of 63/73 kW for efficient processing. The worktable, measuring ø1,400 x 1,200 mm, supports up to 5,000 kg. Equipped with a 92-slot HSK-A100 tool magazine, it includes numerous enhancements like an electronic handwheel, chip conveyor, and collision monitoring. Located with multiple advanced monitoring systems, this machine is streamlined for precision tasks, ensuring reliable performance for demanding applications.

The ANAYAK VH plus 3000 is a versatile machine center, ideal for complex manufacturing tasks, featuring a HEIDENHAIN iTNC530 CNC controller. Built in 2007, it offers reliable operations with X, Y, Z-axis travels of 2,000 mm, 1,000 mm, and 1,100 mm, respectively, and a precise C-axis rotation of 0.001º. The sturdy worktable measures 1,250 x 1,400 mm and supports up to 5,000 kg. The powerful spindle achieves speeds from 60 to 5,000 rpm, delivering 38 kW through a 2-step gearbox. The machine includes 60-tool capacity, an electronic handwheel, a chip conveyor, and a 4th axis. Located in Europe, its equipped with ISO-50 DIN 69871A tool holders and provides superior cooling through the spindle, ensuring efficient performance for demanding production environments.

Introducing the CNC Machining Center with FANUC Control System, designed for precision and efficiency in industrial applications. This machine features an extensive axis travel of 1700 mm (X-axis), 750 mm (Y-axis), and 700 mm (Z-axis), accommodating a wide variety of machining tasks. The robust spindle operates at 12,000 rpm, ensuring high-speed performance with a BT50 tool holder and a 24-slot tool magazine for versatility and reduced downtime. The large worktable supports complex operations, and the included 4th axis enhances multi-dimensional machining capabilities. This equipment is maintained in excellent condition, ready to meet the demands of modern manufacturing environments. Available now for immediate shipping to enhance your production facility.

Introducing the versatile CNC Milling Machine with HEIDENHAIN iTNC530 control, designed for precision machining tasks across various industries. With impressive X, Y, and Z-axis travels of 3,000 mm, 1,700 mm, and 1,500 mm, respectively, this machine offers considerable flexibility for complex operations. The robust spindle delivers power between 28 kW and 38 kW, achieving speeds from 30 to 5,000 rpm, while the spacious worktable measures 3,200 x 1,200 mm and supports up to 8,000 kg. An electronic handwheel and chip conveyor enhance functionality, and the unit is 4th axis ready. Its ISO-50 DIN 69871A tool holder and cooling through the spindle further optimize performance. Available in [Location/Availability], this machine meets diverse manufacturing needs with reliable efficiency.

Key data: 3000 mm, 2500 mm, 1250 mm

Zimmermann FZ38 - 5 Axis Portal Year of construction 2005 - 2022 has been renewed for 600,000 euros, receipts from Zimmermann are enclosed X 3000 Y 2500 Z 1250, A +/- 100 straight C +/- 360 straight 2 spindle 50 kw - 24000 rpm and 44 kw -10,000 rpm Certification Linear Axes 5/m Siemens Control U….. See pictures For more information please contact us At call

Key data: 560 mm, 410 mm, 450 mm

YCM Supermax YCM-56 T X-560 mm Y-410 mmZ-450 mm 4 and 5 axis Control: Fanuc MXP 200i Table 700X420 mm Works flawlessly Location: CH

Heller MC16 Nr31-43487 BJ. 2009 Spindle revolutions 1/min 45-16000 SK40 Travel ranges mm X 630 Y 630 Pobmlb Saowfd Eusljrd Z 630 Travel speed mm/min 1-40000 Number of tools 80 Tool mm 70/150 (for free secondary spaces) Tool length mm 320 Number of pallets 2 Pallet dimensions 400 x 500 Max. load pallet kg 500 B Axis NC Control system Sinumerik 840D Probe Heidenhain Yes Power kVA 60 Machine No. 63

x-travel: 1300 mm y-travel: 610 mm z-travel: 650 mm control: Siemens type: 828 D Shop Mill Tool changer: 24 Fach spindle taper: ISO: 40 SK spindle turning speed range: 8500 U/min table surface area: 1300x610 mm Table load: 1000 kg spindle power: 15 kW total power requirement: . KVA weight of the machine ca.: 8 t dimensions of the machine ca.: m Operating hours: 5000 Equipment: Internal coolant system, chip conveyor on the left, cleaning gun, signal light The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can ...

The machine is in good technical condition, testing is possible by prior arrangement. control system: SINUMERIK 828D Movement in X/Y/Z axes: 1200 / 600 / 500 mm Distance between table and spindle end: 100 - 600 mm Number of axes: 3 Rapid traverse in X/Y/Z axes: 30 m/min Working feeds X/Y/Z: 0 - 15 m/min Clamping area: 1300 x 630 mm Maximum table load: 1500 kg Tool change Number of tool stations: 30 Maximum tool diameter: 80 mm Milling spindle Maximum speed: Mechanical spindle 10,000 rpm, motor spindle 15,000 rpm Maximum torque: mechanical spindle (S6) 100 Nm, motor spindle (S6) 100 Nm Dimensions (length x height x width): 3370 x 2950 x 3000 mm Machine weight: 12000 kg

The machine is in good technical condition, after prior agreement it is possible to test it. Table working area W x D (mm) 1000 x 510 T-slots (DIN 650) 5 x 18 x 100 Max. load (kg) 2000 Travels: X axis (mm) 750 Y axis (mm) 500 Z axis (mm) 510 Spindle taper (DIN 69871 A) SK40 Spindle power (kW) 18 Rapid traverse X/Y/Z axes 32/32/24 Maximum spindle speed (rpm) 12000 Automatic tool changer: Number of positions 30 Tool diameter max. (mm) 80/75 Tool length max. (mm) 300

Offered is a Röders RXP 300 high-speed machining center, year 2010, machine hours approx. 120648h, spindle hours approx. 71200h, HSK-25 high-frequency spindle 50000rpm, HG sensor, high-accuracy package incl. spindle cooling, Renishaw probe, bar magazine with 18 tool stations. An inspection is possible by appointment.

Specifications: Travel X/Y/Z: 600 / 600 / 700 mm Motor power: 15 kW (40% ED); 10 kW (100 & ED) Speed: 18,000 1/min Tool holder: SK 40 SK 40 magazine slots: 60 Equipment: - MillPlus IT 3D path control - Horizontal tool changing device Double gripper - Automatic swivel milling head - Rotating viewing panel - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B-axis SK 40 (only in combination with motor spindle SK 40) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Mode 4: Advanced manual intervention - Flushing gun with pump - Tool breakage detection SK 40 mechanical design, range: 63...310 mm / +/- 3 mm - Interval switching chip conveyor - Internal coolant supply can be switched from 40 bar to 80 bar

Key data: 5800 mm, 39000 mm, 1200 mm

Multiax L-Series CNC Gantry Milling Machine Large 5-axis gantry milling machine with moving-bridge and low-rail open design, ideal for machining long or oversized workpieces. Travels: X 5800 mm, Y 39000 mm, Z 1200 mm. Equipped with a high-speed spindle for machining composites, aluminum, plastics, wood and non-ferrous metals. The modular heavy-duty design offers high rigidity, precision and allows for easy loading and unloading by crane or forklift. Suitable for mold making, prototypes, marine and aerospace components, and large structural parts.

x-travel: 700 mm y-travel: 590 mm z-travel: 480 mm Control: HEIDENHAIN ITNC 530 table weight: 265 Kg a-axis: ±110 ° c-axis: 360 ° rapid travel x/y/z: 32.000 mm/min feed: 15.000 m/min number of spindle speeds: 10.000 U/min/rpm spindle taper: BT - 40 spindle drive: 15/33 kW Torque: 192/189 Nm tool change unit: 32 pos. Working hours: 13.975 h Spindle hours: 6.258 h total power requirement: 30 kva weight of the machine ca.: 8,2 t dimensions of the machine ca.: 2.220 X 2.650 X 2.855 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WORKING RANGE -CUBIC-   X-axis travel: 1270 mm   Y-axis travel: 660 mm   Z-axis travel: 635 mm SPINDLE / HEAD   spindle revolutions (max): 7500 /min BASIC FUNCTIONS   number of spindles: 1   number of turrets: 0   live positions: yes   number of c-axes: 0   number of y-axes: 1   number of b-axes: 0 ATTACHMENTS   chip conveyor: yes WORKING RANGE TURNING   swing diameter (max): 635 mm   worpiece length max.: 1372 mm   workpiece weight max.: 1814 kg MAIN SPINDLE   spindle revolutions (min): 0.001 /min   spindle revolutions (max): 7500 /min X/Z SLIDE   Z-axis travel: 635 mm   X-axis travel: 1270 mm   Y-axis travel: 660 mm TOOL MAGAZINE   tool diameter max.: 178 mm   tool length max.: 406 mm   tool weight max.: 13.6 kg

A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/ ...

Double Pallet Control Unit: Siemens 840D Travels :X: 560 mmY: 510 mmZ: 560 mm B: 360° Spindle speed: 18.000 rpm Table size: 400 mm x 400 mm Tool changer: 60 position Chip conveyor, Tool measurement Unit,High pressure coolant unit Can be inspected under power

Vertical machining center MAS MCV 1016 QUICK

Key data: 1250 mm, 800 mm, 800 mm

Description Technical details x-travel 1250 mm y-travel 800 mm z-travel 800 mm Control HH 426-430 Speed range - infinitely variable from 0 to 12,000 rpm Table surface 1,500 x 1,050 mm Table load 2.50 t Number of T-slots 10 T-slots - spacing 100 mm T-slots 18H7 Tool holder SK40 DIN69871 Tool change 30 Tool - max. 420 mm Weight of the tools max. 10 kg Feed speeds from 20 to 10,000 mm/min Rapid traverse 24 m/min See pictures If it is electrified, it can be tested.

A machining center with 10-station tool changer is offered. Table clamping surface X/Y: 600mm/300mm, travel X/Y/Z: approx. 420mm/300mm/250mm, spindle speed: 6000rpm. Tool holder: BT30. Control: Brother CNC-400, machine weight: approx. 2000kg, including manual. Inspection possible by appointment.

GENERAL Project No.: 905808 Quantity: 1 pcs. Manufacturer: MATEC Type: 30-HV Control: Heidenhain iTNC 530 Year of Make: 2004 Condition: Used machine Approx (hrs): 54117 Program run approx. (hrs.): 14875 Approx. (hrs): 35997 DESCRIPTION MILL 4Axles Travel in X 2000 mm Travel in Y 600 mm Travel in Z 800 mm Tool holder SK 40 Max. speed milling spindle 12000 1/min Milling head automatically swivels 1 degree Chain tool magazine 48 stations Table size 2500x700 mm Interface 4th axis Clamping hydraulics OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Partition wall for pendulum machining Oil/Emulsion Mist Extraction System Hinge belt chip conveyor Internal coolant supply Coolant device with paper belt filter Machine condition light GENERAL TECHNICAL DATA Machine dimensions (LxWx ...

Key data: 1270 mm, 508 mm, 635 mm

Haas VF-4DHE CNC Vertical Machining Center CNC Control Haas CNC Table size 1,321 x 457 mm Table load 1,588 kg Number of pallets: 1 x X-axis travel 1,270 mm Y-axis travel 508 mm Travel Z-axis 635 mm Spindle holder MAS BT40 Spindle speed 40 - 8,100 1/min Spindle motor 22.4 kW Magazine capacity 24 + 1 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

CNC Vertical Machining Center HERMLE C 50 U With track control Heidenhain iTNC 530 Year of Make: 2008 Travel : X 1000 Y 1100 Z 750 Speed range : 20 – 18,000 rpm continuously variable ( HSK 63) With the following accessories: NC swivel rotary table Ø 1150 mm x 900 mm Vertical tool changer with 60 magazine positions ( HSK 63 ) Blowing air through the centre of the spindle Blow-off device IKZ 80 bar with paper belt filter Scraper belt conveyor Coolant Setup Sealing air for scales, bed flushing Oil mist extraction Manual Cab Door , Automatic Cab Roof Electronic Heat Compensation iTNC 530 Electr. Manual control module HR 410 3 D Probe Heidenhain Various HSK 63 tool holders equipped with tools Rotating transparent window Swarf Spray Gun 4 Pieces Height Adjustable Machine Shoes Operating instructions

CNC Vertical Machining Center HERMLE C 30 U With track control Heidenhain iTNC 530 Year of Make: 2008 Travel distances : X 650 Y 600 Z 500 Speed range : 20 – 18,000 rpm infinitely variable ( HSK 63 ) With the following accessories: NC swivel rotary table Ø 630 mm Vertical tool changer with 32 magazine positions ( HSK 63 ) Linear Axis Standard Version Blowing air d.d. spindle center Blow-off device IKZ 40 bar , Paper belt filter for IKZ Scraper belt conveyor Manual Cab Door , Manual Cab Roof Polycarbonate Safety Lenses Electronic Heat Compensation iTNC 530 Electr. iTNC manual control module 3 D Probe Heidenhain Various HSK 63 tool holders equipped with tools Rotating transparent window Oil mist extraction Swarf Spray Gun 4 Pieces Height Adjustable Machine Shoes Operating instructions

CNC Vertical - Machining Center HERMLE C 1200 V With track control Heidenhain iTNC 530 Year of Make: 2009 Travel : X 1200 Y 900 Z 500 Speed range : 20 – 10,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Rigid angle table 1260 mm x 800 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) IKZ 40 bar Blow-off device Scraper belt conveyor Rotating transparent window Coolant Setup Electronic Heat Compensation iTNC 530 Electr. Manual control module HR 410 3 D Probe Heidenhain Control cabinet cooling unit ( RITTAL) Oil mist extraction Various HSK 63 tool holders equipped with tools Spindle Oil Cooler Swarf Spray Gun 4 Pieces Height Adjustable Machine Shoes Operating Instructions

Manufacturer: Heller Model: MC 16.1 Year of Manufacture : 2004 /2005 Technical Specifications Spindle - Motor spindle speed: 16,000 rpm - Tool holder: HSK 63 Setup / Clamping Area - Hydraulic clamping for fixtures - Pneumatic workpiece support control Tool System - Tool magazine capacity: 40 tools - Drill breakage detection Working Area (Axis Travel) - X-axis travel: 630 mm - Y-axis travel: 630 mm - Z-axis travel: 630 mm Coolant System - Knoll coolant system - Maximum tool coolant pressure: 30 bar Hydraulic System - System pressure: 60 bar Find more here - / Contact us at -

Control: OSP-P 300S X-axis: 695 mm Y-axis with stroke: +150/ -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° C-axis: 360°, positioning in 0.001° Turning diameter: 650 mm Turning length: 1,500 mm Mount: Capto C6 Total tool positions: 80 Accessories: NC Tailstock Movable hydraulic steady rest AX 5 on NC axis Coolant system with belt flow filter hydraulic 3-jaw chuck Kitagawa BB 212-11 automatic touchsetter High-pressure cooling IKZ High Cut Pro software option (High Accuracy Package with Super Nurbs) CAS Collision Prevention System Spindle orientation main spindle, electric Multi-tool including rotation function for Y-axis Helix function Automatic main power shutdown DNC-DT interface Machining Navi M-i (milling), speed control to minimize vibrations. One-Touch IGF Chip conveyor

A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible.

CHIRON FZ08 KS Magnum High Speed Plus (HSP) High-Speed Machining Center (HSP) TECHNICAL FEATURES: Year: 2006 NC Type: FANUC 18i-MB5 Number of axes: 7 X-axis travel: 450 [mm] Y-axis travel: 270 [mm] Z-axis travel: 310 [mm] X, Y and Z fast travel speed: 75000 [mm/min] Maximum diameter in bar turning spindle: 32 [mm] Maximum speed Turning spindle: 8000 [rpm] Maximum power turning spindle: 12 [kW] A-axis angular travel: 360 [°] A-axis indexing accuracy: 0.001 [°] B-axis angular travel: -20° / +115 [°] B-axis indexing accuracy: 0.001 [°] Pin Attachment: HSK40 Maximum speed Spindle: 30000 [rpm] Number of tool magazine stations: 40 Turning part by robot (6th side machining): Yes RS232 Port: Yes Installed power: 17 [kVA] Supply voltage: 400 [V] Operating hours: 9911 [h] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW p ...

A defective vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, tool stations: 20, tool holder: SK40, speed: 10000rpm, table dimensions X/Y: 1000mm/560mm, T-slot spacing: 100mm, max. table load: 800kg, table height: 720mm. Control: Heidenhain TNC 530, operating hours: approx. 29836h. Either the pneumatic release cylinder or the spindle is defective. Documentation available. On-site inspection is possible.

A universal machining center is offered with control: Heidenhain TNC 426. Operating hours: approx. 45380h, spindle hours: approx. 14384h. Viewing possible by appointment.

The machine is in good technical condition, testing possible after prior agreement. 3 AXES, Heidenhain ITNC 530 control system.

Key data: 6195 mm, 2935 mm, 565 mm

TECHNICAL DATA: Working Range: X: 4600 mm Y: 2200 Maximum travel: X: 6195 mm Y: 2935 mm Z: 565 mm 5 axes Nesting table 01 Turret tool magazine with 18 slots 01 self-propelled tool changer 10 stops: stroke 150 mm 01 Vacuum pump: 250 m³ 01 Vacuum pump: 500 m³ 01 Laser Pointer Pen Drilling unit (6 kW): 18 spindles for vertical drilling (11+2 X-axis - 6 Y-axis) 02 Double-Sided Spindles for Horizontal Drilling – X-Axis 01 Double-Sided Spindles for Horizontal Drilling – Y-Axis 01 Saw blade unit – X-axis Electrospindle unit (13 kW): Equipped with HSK mount - liquid-cooled Software: CAMPUS V7 PLUS

Works well Machine is in Spain Standard configuration with cutting range 2500 × 1550 No. 1 Automatic CNC saw with milling unit and multi-spindle drill head, model MASTERCUT 2500 × 1550, with the following characteristics: Angle of rotation of the saw: ±90° Servo motors: Digital servo motors from YASKAWA Flywheels: Ø 800 mm made of cast iron Cleaning systems for the flywheels Saw Position Sensor Suction nozzle: Ø 150 mm Compressed air requirement: 6–7 bar Self-braking motor for the flywheels: 7.5 kW Automatic lubrication of all components Pneumatic Tensioning of Flywheels Maximum cutting length: 2500 mm Maximum cutting width: 1550 mm Maximum cutting height: 0–150 mm Minimum cutting radius (depending on the saw blade): 65 mm with 13 mm saw blade Dimensions of the saw blade: 5,450 × 13 × 0.6 mm or 5,450 × 16 × 0.8 mm  ...