5 axis machining used for sale

The machine is in good technical condition, after prior agreement it is possible to test it. Fully functional, still in operation in very good condition. Year of commissioning 2010 - it ran in single-shift operation. Direct measurement in all five axes. Speed 15000, the spindle is in excellent condition, cooling through the spindle center, water and air. ISO40 taper, tool magazine 48, BLUM LASER tool probe brand new, Renishaw workpiece probe. New chip conveyor. HEIDENHAIN iTNC 530 system with purchased kinematics. The machine has always been serviced by an authorized service. To this day, the parameters of the new machine do not differ from the parameters of our machine. By agreement, many accessories can be sold with the machine.

Key data: 420 mm, 300 mm, 250 mm

YASDA YMC 430 Ver. II 5-Axis CNC Vertical Machining Center, 40K RPM, Trunnion Table, 32 ATC, HSK-E32, Fanuc 31i-B5, Hard Milling, LOW HOURS, Year: 2017 CNC Control: yes Type of CNC Control: FANUC 31i-B５ Cutting Time Hours: 8138 X-axis travel: 16.5"/420mm Y-axis travel: 11.8"/300mm Z-axis travel: 9.8"/250mm Table to spindle nose distance: 5.9" - 15.7" / 150mm - 400mm Spindle taper hole: HSK-E32 Spindle speed range: 200-40,000 RPMs Spindle drive motor: 10 HP / 7.5 KW AC ( Continuous ) Table working size: 600mm x 350mm / 26.6" x 13.7" Table Loading capacity: 33 lbs. / 15 kg. Rapid Feed Rate X, Y, Z: 787.4 ipm /20000 mm/min - Standard MODE MAXIMUM CUTTING FEED: 393.7 ipm / 5,000mm/min Min. input increment: 0.0001mm (0.01μm) Optical scale feed back: X, Y, Z-axis 0.000001mm (0.001μm) command available Tool storage capacity: 32 tools Max. tool dia. / length / mass: φ50m ...

The machine is in good technical condition, testing is possible by prior arrangement.

Manufacturer: Chiron Model: MILL 6000 high speed with NC swivel head Year of Manufacture: 2004 Major overhaul: 2013 Operating hours: 77,374 h Weight: 19,500 kg Power Supply: 3/N/PE ~ 50/60 Hz Working Voltage: 400 V Control Voltage: 220/24 V Power Consumption: 52 kVA Rated Current: 75 A Fuse: 80 A Last spindle replacement: March 2021 (approx. 7,300 spindle hours since) Technical Data: - Control: Siemens 840D (PCU50, NCU572.4) - NC swivel head - Travel paths: X 6,000 mm / Y 630 mm - Rapid feed: X / Y / Z = 60 m/min - Motor spindle: 12,000 rpm, 140 Nm - Tool change time (chip-to-chip): 3.0 sec (vertical), 4.7 sec (horizontal) - Tool magazine: 92 tool positions, HSK-A63 Find more here - / Contact us at -

Key data: 100 mm, 500 mm, 480 mm

Manufacturer: Brother Type: Speedio W-1000 XD1 Commissioning: 2024 Control type: CNC D00 and plain text dialog programming Axles: 4 X-travel: 100 mm Y-travel: 500 mm Z-travel: 480 mm + stand elevation 150 mm 4.Axis 360° Spindle speed: 16 -16000 rpm Spindle adapter cone: BBT-30 (BT-30) Tool stations: 21 (high-speed tool changer) Optional extras: Internal coolant supply 15 bar with self-cleaning pre-filter system Coolant tank 150 litres "Twin" chip disposal system for coarse and fine chips incl. filter system Automatic side door for robot loading Emulsion mist extraction for working area 700 m³/h CNC rotary table Brother T200 Ad.L clamped with counter bearing 2 x rotary union 4-flow Workpiece clamping hydraulic 80-210 bar Tool breakage monitoring Renishaw Laser Robot interface Part clamping control via differential pressure sensors (2-fold) ...

Key data: 762 mm, 406 mm, 506 mm

CNC Vertical Machining Center CNC Control Haas CNC Table size 914 x 356 mm Table load 680 kg Number of pallets: 1 x X-axis travel 762 mm Y-axis travel 406 mm Travel Z-axis 508 mm Spindle holder DIN 68971A Spindle speed 12,000 1/min Spindle motor 22.4 kW Magazine capacity 24 + 1 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

The machine is in good technical condition, after prior agreement it is possible to test it. X 750mm, Y 500mm, Z 600mm. Spindle speed 10 thousand, tool magazine 22 positions, chip conveyor, cutting fluid filtration, iTNC 530 control system.. double machining center (3 axes and 5 workplace axes) AXA DBZ with rotary table SRTA2-300

Key data: 2 mm, 425 mm, 400 mm

Machining Center (Vertical) CNC TYPE: SW BA25 Control: Siemens 840 C Travel X/Y/Z: 2 x 600 or 1 x 1,800 / 425 / 400mm Main spindle: SK40 / 7,500 rpm /106 Nm / 14kW / IKZ Rapid traverse: 40 m/min Tool changer: 36-speed Dimensions W/H/D: 5,100 / 3,000 / 2,900 mm Weight: 9,500 KG Equipment: Single or two-station with shuttle operation Left side with controlled 4th axle and hydraulic double clamp Right side 2x hydraulic double clamp Separate hydraulic unit for increased clamping pressures under manual clamping Can be reclamped to program-controlled voltage via central hydraulics Conveyor Coolant device with gap filter and high-pressure pump for internal coolant supply Prepared for Renishaw touch probes

OKUMA MX55 Control: OSP700M Machine hours (spindle running time): 26,889 Accessories: various tool holder BT50; 4. Axis Partial Attachment

Manufacturer: SW Model: BA-W 06-22 Year of Manufacture: 2007 Control: Siemens 840 D Technical Details: - Spindle Distance: 600 mm - Travel X: 600 mm - Travel Y: 600 (975) mm - Travel Z: 500 mm - Travel A: 600 mm - Max. Rapid Traverse Speed (X/Y/Z): 45 m/min - Tool Holder: A63 HSK - Tool Magazine: 2 × 72 tools - Spindle Speed: 17,500 rpm - Drive Power: 38 kW - Weight: 18,000 kg Equipment: - 2-fold tool changer - 2 NC-controlled swiveling units for clamping bridge - 2 NC-controlled swiveling units - 4 NC-controlled rotary tables - KNOLL cooling unit - IKZ high-pressure pump 70 bar - Chip conveyor - Additional control panel for tool management Find more here - / Contact us at -

Type: Ultrix 800 RT A high-end 5 interpolated axes multitasking machining centre. Designed for the highest performance in machining 3D shapes that require turning, milling, drilling and grinding.nbsp;Tailored to applications ranging from complex gears, impellers to molds, dies, tools,... for projects in aerospace, automotive, power generation,... max workpiece diameter: 900 mm A-axis: -30° / 110° C-axis: continuous max distance between spindle and table: 650 mm Options fitted to machine: 1 - high speed spindle of 40 000 rpm 2 - table with diameter 700 mm 3 - toolchanger with 150 positions 4 - chipconveyor 5 - coolant system with recuperation 6 - temperature regulation for coolant 7 - high pressure cooling (40 to 70 bar) through spindle 8 - smoke extraction system 9 - chip collection box 10 -nbsp;presetting system and tool integrity 11 - Renishaw measuring probe X-axis: 800 mm Y-axi ...

Key data: 450 mm, 270 mm, 310 mm

Chiron FZ08K S Magnum Work table: length 770mm, width 290mm (clamping surface) Rigid table with chip tray for optimum chip fall during wet and dry machining. With raster drilling pattern: M16 x diameter 15 H7 x 50mm Rapid traverse: 75m/min in X, Y and Z axis Max. speed [rpm]: 3000 Dimensions/Weight: Length [m]: 2.308, Width [m]: 1.405, Height [m]: 2.447 Total weight [Kg]: 3400 Electronics: Control type: Siemens CNC control 840D (PCU 50 / NCU 572.3, 6 measuring circuits, 1 channel) incl. 10.4" TFT color screen/full keyboard OP010S Control Panel Logic Windows NT/XP Machine connection: Voltage [V]: 400 / 230 + 6% / -10% - 50Hz/N/Pe Frequency [Hz]: 50/60Hz Type of current: three-phase current Power: 14kVA

Key data: 450 mm, 270 mm, 310 mm

Chiron FZ08KS Magnum, NC machine: 3-axle Workbench: Length [mm]: 770, Width [mm]: 290 Table information: Rigid table with chip tray for optimal chip fall for wet and dry machining Clamping area: 770mm x 290mm with raster drilling pattern M16 x 15H7 x 50mm Table load: max. 500 kg Rapid traverse: X and Y axis 40m/min, Z axis 60m/min Max. speed [rpm]: 1500 Dimensions/Weight: Length [m]: 2,308, Width [m]: 1,405, Height [m]: 2,447 Total weight [Kg]: 3400 Electronics: Control Type: Siemens CNC Control 84OD PCU 50 / NCU 572.4, 6 measuring circuits, 1 channel incl. 10.4" TFT color screen / full keyboard OPO10S Windows NT Control Panel Logic NO RAM 256KB Machine connection: Voltage [V]: 400 / 230V t 107o - 50Hz/N/PE Frequency [Hz]: 50/60Hz Type of current: three-phase current Power: 13kVA Remark Accessories: Pressure monitoring of internal cooling

Key data: 630 mm, 400 mm, 500 mm

Chiron FZ 18 W, NC machine: 5-axis machine Interference circle diameter [mm]: 630 with variaber Wz alternating plane Plate size: Workpiece changing device 0 / 180° weight-dependent, Self-regulating thanks to self-learning speed control Transport load per side Ø - max. 400Kg with stainless steel centre partition Clamping area 2 x 940 x 470mm² with threaded and fitting hole grid: M16x Ø 15H7x50mm Workpiece change time: approx. 3.7sec. weight-dependent, Self-regulating thanks to self-learning speed control Workbench: Two-axis NC rotary table Type ATU 200/AWU 160, Fabr. PEISELER Face plates Ø 180mm with centering hole A50 + Ø 012 Fixing pin Ø 16H7 and 4x M10 in bolt circle 104.8 Center height 174mm with horizontal axis of rotation Dimension to upper edge of face plate with vertical axis of rotation 263mm Sub-range 5, axis 360° continuous, 4th axis 0-90° S ...

Manufacturer: AUERBACH Model: AX3 TLF Year of Manufacture: 2011 Technical Specifications - Total Weight: 15 t - Wiring Diagram: Included (Dok) - Assembly Diagram: Included (Dok) - Temperature Range: +5 °C to +40 °C - Power Supply: 3-phase ~ 50 Hz - Rated Voltage (Main): 400 V - Control Voltage: 24 V DC - Auxiliary Voltage: 230 V AC - Connected Load: 46 kW - Rated Current (Machine): 87 A - Current of Installed Devices (Normal Operation): 100 A - Supply Cable Protection: 041 – 045 Find more here - / Contact us at -

Manufacturer: LINEMATIC Model: LM34/705 Year of Manufacture: 2004 Power: 14 kW Voltage: 400 V, 20 A, 50 Hz Phase: 3-phase + Neutral + Protective Earth CE certified Find more here - / Contact us at -

Manufacturer: LINEMATIC Model: LM34/725 Year of Manufacture: 2005 Power Requirement : 17 kW Voltage (VOLTS): 400 V Current (AMPS): 24 A Frequency (FREQ): 50 Hz Phase (PHASE): 3P + N + PE (Three-phase with Neutral and Protective Earth) CE marked Find more here - / Contact us at -

Manufacture: Linematic Model: LM34/949 Year of Manufacture: 2015 Power Requirement: 12 kW Voltage: 400 V Current: 16 A Frequency: 50 Hz Phase: 3P + N + PE Certification: CE Find more here - / Contact us at -

Manufacturer: LINEMATIC Model: LM34/882 Year of Manufacture: 2012 Power Requirement: 28 kW Voltage: 400 V Current: 40 A Frequency: 50 Hz Phase: 3P + N + PE Certification: CE Find more here - / Contact us at -

A CNC contour processing system HML for precise edge processing and contour milling of technical laminates or printed circuit boards (PCBs) is available. Weight: approx. 1400kg. Documentation available. An on-site inspection is possible.

Manufacturer: Elumatec Model: SBZ 122/31 Year of Manufacture: 2007 Type of Machine : Bar Processing Center Processing Length: 3750 mm with bar support / 3500 mm without Axis Travel: X = 350 mm, Y = 280 mm, Z = 300 mm Speed: 30 m/min positioning speed (all axes) Accuracy: ±0.1 mm Spindle: 6 kW, 21,000 rpm, HSK F63 Tool Stations: 5 Max. Tool Diameter: 200 mm (manual), 92 mm (automatic) Max. Saw Blade Diameter: 500 mm Air Consumption: ~50 l per cycle Compressed Air Requirement: >7 bar Power Supply: 400 V, 3-phase Find more here - / Contact us at -

Machining center TOS Kurim MCFHD 80 CNC, control system Mefi

Kolmag brand machining center Woodworking machines Model T35 Serial number K3426 Year of construction 2020 The machine does not have all accident prevention documentation (EC declaration of conformity, use and maintenance manual). Operation not verified as it is disconnected from the electrical voltage. ASSET INTENDED FOR SECTOR TRADERS, AFFILIATED OUTSOURCERS, MANUFACTURERS AND SCRAP DEALERS.

A Mazak CNC vertical machining center is available. Travel X/Y/Z: 1660mm/760mm/660mm, spindle power: 11kW, spindle speed: 7000rpm, table dimensions X/Y: 2000mm/760mm, max. workpiece weight: 800kg, rapid traverse X/Y/Z: 24m/min/24m/min/20m/min, feed: 5m/min, tool positions: 24. Machine dimensions X/Y/Z: approx. 4350mm/3400mm/2850mm, weight: approx. 8700kg. Documentation available. An on-site inspection is possible.

serial number: 1296 : ja changer: ja fach documentation: ja control: Heidenhain 426 weight of the machine ca.: 6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, rotation range C: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, tool holder: HSK-E50, spindle speed: 42000rpm, max. workpiece weight: 200kg, feed: 80m/min, max. tool length/diameter: 250mm/80mm. Machine dimensions X/Y/Z: approx. 3250mm/2950mm/2900mm, weight: approx. 9500kg, control: Heidenhain iTNC530. Documentation available. An on-site inspection is possible. The machine is located in China.

Key data: 800 mm, 800 mm, 800 mm

3D path control Heidenhain iTNC 530, main drive 19 KW (100% ED), 28 KW (40% ED), Tool holder SK 40, chain magazine with 60 places, chip conveyor, rotating viewing disc, Coolant tank with 600 liters, IKZ with 40 bar, switchable to blowing air, universal milling head B-axis, NC rotary table 900mm x 700 mm, infrared touch probe Heidenhain TS 641, electronic handwheel, Operating mode 4, documentation with repair work available. Spindle hours Total 13,700 of which 680 hours on new spindle replaced 27.02.2024

Key data: 1000 mm, 510 mm, 450 mm

CNC control SEICOS (Sigma) 18M, speed range 120-12000 rpm, 22 / 18.5 KW Tool holder SK 40, tool magazine with 30 places, IKZ mt 15 bar, HSC machine package for precise milling at high feed speed Dimensions: Width x depth x height 2900 x 2400 x 2786 mm, weight approx. 8200 kg Please note: The machine is not usable, tool clamping of the SK 40 mount is defective. Tool changer can therefore not change.

Key data: 650 mm, 600 mm, 620 mm

From a current recycling we offer you a CNC machining center from the manufacturer AVIA, type VMC 650 V. Year of construction:2023 Condition: normal signs of wear Hours: Asking price: VHB Original price: 120.000 € Equipment / accessories / other information: x/y/z 650/600/620mm, Table 800x550mm 30 mm tool magazine Asset Manager: M. Vorkötter Phone: 0202-257273152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: The sale is without warranty Subject to prior sale

Travel X/Y/Z: 1100mm/550mm/560mm, tool holder: BT40, spindle speed: 6000rpm, tool positions: 24, control: Mitsubishi. Documentation available. An on-site inspection is possible.

A CNC 4-axis universal milling machine DMG DMU 80 T is available. Travel X/Y/Z: 880mm/630mm/630mm, spindle speed: 12000rpm, spindle power: 15kW/10kW, tool holder: SK40, tool magazine: 32, table dimensions X/Y: 1250mm/700mm, max. table load: 600kg, infrared probe: Heidenhain TS 631. Machine dimensions X/Y/Z: approx. 7600mm/3350mm/2750mm, weight: approx. 8800kg, control: Heidenhain TNC 430. Including automation extension Promot. Documentation available. An on-site inspection is possible.

The machine is in good technical condition, after prior agreement it is possible to test it. Workpiece probe renishaw RMP60. Centerline probing, simultaneous machining, chip conveyor. 20 tools. Table diameter 200mm. X and Y overhauled.

CNC machining center from Urban Control: Heidenhain Track Control iTNC 530 4-axis Travel x/y/z – axis 7200 /450 /590 mm Working range x/y/z axis 7000 / 400 /350 mm Weight 14 t Equipment: Robust basic structure as a welded frame construction Ball rail guide on all axes Milling spindle unit: 100-12000 rpm, tool holder SK 40 Drives: X-axis 50 m/min by rack and pinion drive Y/Z axis 25m/min by ball screw B-axis 9000°/min Control panel swivels Automatic central lubrication Moving tool changer for 12 tool holders SK40 Cooling emulsion plant, machine people, security fence Electronic handwheel integrated into the control panel Chip drawers, laser scanners, minimum quantity lubrication Technical data see pictures.

CHIRON FZ18 S CNC machining center with SK40 rotary table integrated as 4-axis in the control system Control: SIEMENS NUMERIK 810 Not in operation since 2016

Type: XCEEDER 900/RT Een hoogwaardig multitasking bewerkingscentrum met 5 geïnterpoleerde assen. Ontworpen voor de hoogste prestaties bij het bewerken van 3D-vormen die draaien, frezen, boren en slijpen vereisen. Speciaal afgestemd op toepassingen variërend van complexe tandwielen en waaiers tot mallen, matrijzen en gereedschappen, voor projecten in de lucht- en ruimtevaart, automotive en energieopwekking. maximale werkstukdiameter: 900 mm A-as: -30° / 110° C-as: continu: 100 RPM maximale afstand tussen spindel en tafel: 700 mm Opties gemonteerd op de machine: 1 - hogesnelheidsspindel van 40.000 tpm 2 - tafel met diameter 700 mm 3 - gereedschapswisselaar met 150 posities 4 - spaantransportband 5 - koelsysteem met recuperatie 6 - temperatuurregeling voor koelmiddel 7 - hoge druk koeling (40 tot 70 bar) door spindel 8 - rookafzuigsysteem 9 - chipverzamelbox 10 - Voorinstelling syste ...

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: TNC 426M Heidenhain Main spindle:: turning speed range - main spindle: 20 - 9.000 min/-1 power capacity - main spindel: 9 / 13 kW max. Torque: 57 / 82 Nm tool taper: ISO 40 DIN 69871 swiveling-rotary-table:: table diameter: 700 x 500 mm swivellable: B: 105° (-10°/+95°) man. rotatable: 360° man. max. table load: 200 kg number of T-slots: 7 T-slot - distance: 63 mm T-slot - width: 14H7 mm center hole: 30H7 mm Tool-Presetter:: number of toolpositions: 16 pos. tool taper: ISO 40 DIN 69871 max. tool length: 290 mm max. tool weight: 6,0 kg max. total weight: 50 kg feeds:: feed speeds: max. 10.000 mm/min rapid traverse: 12 m/min input unit: 0,01 mm total power requirement: 17 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 4,0 x 4,0 x 2,5 m Documents: Chip-Tray: Coolantsystem: B-axis: man. C-axis: man. Swi ...

Works well.

The machine is in good technical condition, after prior agreement it is possible to test it. X=880, Y=630, Z=630 Rotary table 360, tilting head +120 /-30 32 slots, chip conveyor Rpm=12k

Travel X/Y/Z: 630mm/630mm/630mm, B-axis: 360°, B-axis resolution: 0.001°, Tool holder: SK40, Tool positions: 160, Pallet positions: 6, Pallet dimensions X/Y: 400mm/500mm, Rapid traverse: 40m/min, ICS pressure: 50bar. Machine dimensions X/Y/Z: approx. 5850mm/2500mm/2750mm, Weight: approx. 12500kg, Control: Siemens Sinumerik 840D. Including Blum probe and drill breakage control. Documentation available. An on-site inspection is possible.

Year of construction 2008 Control Mazatrol PC Fusion 640 M Travel X-axis: 1,700 mm Y-axis: 1,400 mm Z-axis: 1,400 mm Milling spindle Drive power: 37 kW Max. speed: 10,000 rpm NC rotary table 0.001° Indexing, 360,000 Positions Pallet Changer – Palletech 6 pallets Pallet size: 1,000 x 1,000 mm Setup station Tool magazine 120 tool positions BT-50 More options NC4 laser Renishaw OMP60 Probe Synchronized Threading Detachable handwheel CNC Performance Package Mayfran Concep Chip Conveyor with Drum Filter 70 bar high pressure pump

punkt-zu-punkt-Bohrmaschine mit numerischer Steuerung MASTERWOOD SPEEDY 207 für die kundenspezifische Möbelherstellung, Küchenmöbel, Badezimmermöbel und verschiedene Prozesse bohrkopf mit 5 unabhängigen vertikalen Spannfuttern und 1 doppeltem horizontalem Spannfutter säge für Längsschnitte maschinentisch mit 1390 x 750 mm Bohrkapazität und zwei seitlichen Hochfahranschlägen, die von der Steuereinheit gesteuert werden, um mit nur einem Programm und einem Zwischenhalt platten bis zu einer Größe von 2800 x 750 mm auszuführen möglichkeit zum Bohren von 2800-mm-Platten pneumatische Werkzeugverschiebung mm 60 max. plattendicke mm 50 drehzahl der spindeln U/min 4500 sägerotation U/min 6000 vakuumpumpenmotor PS 1.5 Saugnapfdurchmesser mm 80 frontanschlag komplett mit 4 Schließzylindern zum Bohren schmaler Werkstücke und Leisten multitasking-steuerung komplett m ...

Table size 2240x810 mm Max loading capacity 3000kg Spindle speed 6000 rpm Number of tools in magazine 60 With tool measurement unit All axes with linear scale

Freesrobot Staubli RX170HM Deze robot is voorzien van gaten om te frezen in mallen van banden, maar ook in andere zaken is dit mogelijk. Koeling door de spindel en de koelmelk is luchtgekoeld. Smering Gebeurde met vet. spindelopname: HSK E 32 Werd gebruikt in Tire Mold fabriek Mecamold Herstal. Max weight on the table: 300 kg Admission in spindle (ISO): HSK E 32 Power on the spindle: 8 kW Drilling-capacity: 80 mm Tapping-capacity: 80 mm Control : Fanuc Number of axes: 6 Toolchanger: nee Number of toolholders: nee Number of rotations: 500 - 20 000 rpm Power principal motor : 5 kW

Travel X/Y/Z: 1800mm/900mm/900mm, table dimensions X/Y: 1950mm/900mm, max. table load: 3000kg, tool holder: SK40, max. spindle speed: 12000rpm, feed rate: 12m/min, repeatability: +/-0.003mm, positioning accuracy: +/-0.005mm, weight: approx. 17000kg, control: Heidenhain. Documentation available. An on-site inspection is possible.

The machine is in good technical condition, testing possible by prior arrangement. 20,000rpm, 24,000 hours, iTNC 530.

Key data: 435 mm, 465 mm, 560 mm

Matsuura MX-330 - PC10 Vertical 5-axis machining center CNC control Matsuura G-Tech 31 i Table size ø 130 mm Table load 80 kg Number of pallets 10 Max. workpiece diameter x height 330 x 300 mm X-axis travel 435 mm Y-axis travel 465 mm Travel Z-axis 560 mm C-axis (table rotation) 360° A-axis (table tilt) -125/+10° Spindle speed 50 - 15,000 rpm Spindle holder MAS BBT 40 Spindle motor 7.5/5.5 kW Magazine capacity 90 If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

x-travel: 1040 mm y-travel: 510 mm z-travel: 640 mm control: Mazatrol type: M Plus Tool changer: 24 Pos. spindle taper: ISO: spindle turning speed range: U/min table surface area: mm Table load: kg spindle power: kW total power requirement: KVA weight of the machine ca.: 5,5 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ...

Travel X/Y/Z: 670mm/430mm/460mm, table dimensions X/Y: 900mm/410mm, max. workpiece weight: 350kg, tool holder: SK40, spindle speed: 8000rpm, spindle inner diameter: 60mm, max. spindle-to-column distance: 460mm, rapid traverse: 24m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 2200mm/2050mm/2500mm, weight: approx. 3700kg, control: Heidenhain TNC 620, operating hours: approx. 21550h, spindle hours: approx. 3500h. Documentation available. An on-site inspection is possible.

Travel path X/Y/Z: 1035mm/560mm/510mm, table dimensions X/Y: 1200mm/560mm, max. table load: 1000kg, tool holder: SK40, tool stations: 20, spindle speed: 8000rpm, power: 13kW/9kW, torque: 83Nm/57Nm, feed rate: 20m/min, rapid traverse: 25m/min. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2600mm, weight: approx. 4500kg, control: Siemens Sinumerik 810D powerline, operating hours: 27241h. Including conveyor. Documentation available. An on-site inspection is possible.

Travel X/Y/Z: 2000mm/610mm/630mm, tool holder: SK40, spindle speed: 9000rpm, tool stations: 40, rapid traverse: 60m/min, table dimensions X/Y: 2100mm/720mm, max. table load: 1000kg. Control: Siemens Sinumerik 840D, operating hours: 18272h. Including conveyor and coolant system. Documentation available. An on-site inspection is possible.