5 axis machining used for sale

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/CEvrZLMrTPc Former Linde full-service machine Powerful 48V device Front tyres AR PU Rear tyres LR Tandem PU Width over forks 540 mm Fork length 1,150 mm Battery Li-ION 48V 20Ah Charger Li-ION 48V 10A onboard Auction-ID: A1-45453-357

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 14/09/2018 80V 575AH , very good performance measured with 84.3V - Triplex mast with full free lift - 3rd + 4th valve; Fork adjuster with sideshift - Full cabin with heater and windshield wipers - Facelift model with tilt angle display (practical for sensitive goods) Auction-ID: A1-45453-102

REMA Battery Connector 400V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-3451

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45453-3651

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/_JKycaXsgcw - Former Linde full-service device - Triplex mast with full free lift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - StVZO lighting with turn signals for road approval - Comfort seat Auction-ID: A1-45453-134

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45453-3702

The 18 volt LXT battery BL1850B from Makita is equipped with a handy sliding system and an LED indicator. The LED indicator shows the status of the battery and filling. When 4 LEDs are on, the battery still has a capacity = 75-100% When 3 LEDs are lit, the battery still has a capacity = 50-75% When 2 LEDs are lit, the battery still has a capacity = 25-50% When 1 LED is on, the battery still has a capacity = 0-25% If the last LED starts flashing, the battery needs to be recharged. If two of the four LEDs flash alternately, there may have been a malfunction in the battery. Amperage per hour: The higher the Ampere stated with a battery, the longer the battery can supply voltage (power), the charging time is also influenced by the Ampere-hour. In addition, the lot also contains a Makita battery charger DC18SD Auction-ID: A1-46851-1223

Battery with good performance, last service 09/2025 with 48h desulphation Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45453-1164

REMA Battery Connector 220V Wall Plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-3623

REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-3580

Industrial Deburring Stations – Year 2019 SEW USOCOME actuator – Pneumatic control - General Description: We offer for sale these industrial deburring stations in good condition, year of construction 2019, designed for deburring operations in industrial environments. Robust, compact and safe stations, ideal for mechanical, machining, sheet metal or industrial subcontractors. - Technical characteristics Equipment Type: Deburring Station Year: 2019 Engine : SEW USOCOME Engine type: DRN80M2/BE05/FI B3 Maximum speed: 2860 rpm Order Type: MCLTPB0015-5A3-4-00 Structure: Column station with reinforced base - Integrated equipment Pneumatic up/down Foot pedal control Adjustable protective screen Built-in light stand Complete electrical box with dimmer and protections - Benefits Recent Material (2019) Rugged industrial manufacturing Engine recognized for its reliability Quick and easy inst ...

Equipped with: parking sensors v+a, pano roof, cruise control, rain+light sensors, 7 persons, aux, tow bar, privacy glass, Auction-ID: A1-42018-175

Equipped with: Air brakes, PTO speed 540/750/1000/1400, connection for front loader incl 6 valves (without the front loader itself), 4 double valves rear, 7 poles, tow bar, ac, work led lighting. Auction-ID: A1-40139-32

Batch of 50 pieces of composite corner profiles for facade cladding. Color black, length 280 cm. Packed per 3 in foil. Risk of minor damage. Auction-ID: A1-40113-159

Cushion dimensions: 56 x 36 x 10 cm Approximately 450 cushions 90 pieces per pallet Block pallets size 120 x 100 cm included Auction-ID: A1-40139-296

Concerns 7 pallets of rubber approximately 540m2. Various sizes and thicknesses of 2/3/4 cm thick! Auction-ID: A1-40137-373

Year of construction 2023 DC output 250–500 VDC Max. current 60A AC input 360–440 VAC Frequency 45–65 Hz Mains current 32A Protection class IP54 Weight 34 kg Connection Industrial power current Application Mobile charging EVs / workshops / demo / service Mobile trolley configuration CCS charging gun available Auction-ID: A1-42018-189

Equipped with: including forks, bucket, lighting, windshield wipers, lighting, rearview mirror, 24368 hour position, Auction-ID: A1-40139-188

54 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 39.9 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40113-152

Equipped with: Lemken Rubin 9/500 KUA, year of construction: 2013, air brakes, lighting + marking, double tube roller, wide wheels BKT 16.0/70-20, side discs, NL Registration, 40 discs, 620mm, power 129 - 184kW, suspension system ensures that the discs can lift over obstacles, but prevents lateral movement, Auction-ID: A1-40139-19

Equipped with: RAVO 5002, self-propelled compact street sweeper, brand RAVO, type 5002, year of construction 2000, equipped with hydraulically tiltable dirt container and closed cabin, suitable for use on industrial estates, logistics centers and municipal cleaning, time reading: 5,847 hours (read), 6-cylinder Iveco diesel, power: 81 kW, speed: 700 – 2500 rpm, empty weight: approx. 5,560 kg, max. Total weight: 10,500 kg, hopper capacity (waste container): 5.0 m³, Water tank: 600 litres, Standard working width: 2,200 – 2,400 mm, Working width with 3rd brush: up to 3,300 mm, Registration number: present, VIN: present on type plate, steel brushes (adjustable), 3rd brush (adjustable), suction arm, front brush unit, hydraulically tipping waste container (5.0 m³), water tank (600 L), built-in high-pressure cleaner with reel and spray lance, TFT colour monitor in cabin, closed cabin with  ...

Concerns 5 pallets of rubber approximately 500m2. Various sizes and thicknesses of 2/3/4 cm thick! Auction-ID: A1-40137-369

Equipped with: 16 Newton blowing force, excluding battery Auction-ID: A1-40113-100

Concerns 6 pallets of rubber approximately 540m2. Various sizes and thicknesses of 2/3/4 cm thick! Auction-ID: A1-40137-371

New and unused in the packaging. 336 pieces Composite Fence Board Anthracite / Black 182.5x15.4x2 cm. Model: Wood grain structure Auction-ID: A1-40113-162

Party Explorer heated body warmers with hood (±500 pieces) Specifications: Model: Explorer bodywarmer Type: electric heated Material: polyester Sizes: XS to L Colours: black, ochre yellow, beige Quantity: approx. 500 pieces Heating: Carbon Fiber Heating Zones Heat settings: 3 adjustable Operating time: up to approx. 8 hours (depending on power bank) Washability: 40°C (delicate wash) Features: Integrated heating zones in back and shoulders 3-position heat controller Hood Lightweight and comfortable fit Durable and colourfast material Suitable for daily use Particularities: Large batch suitable for resale Relatively large proportion of size XS (approx. 100–120 pieces) Size XS suitable for youth from approx. 10 years Power bank not included Auction-ID: A1-40113-204

Equipped with 4-Cil. \"JCB\" Diesel engine STAGEV; 75hp; additional hydraulic function; 4 wheel drive; 4 wheel steered; 3 steering positions; tire size: 15.5/80-24; train driver code; LED lighting; 2LED beacons; weighing system; pallet fork; Auction-ID: A1-40139-10

Equipped with: Lemken Albatros 9/5000-B27 trailed sprayer from 2011, tank capacity of 5,000 liters and a working width of 28 meters, professional agricultural sprayer equipped with Müller control system, Müller Trail Control and hydraulically braked chassis, machine is equipped with 9 sections with section switch and wide 520 tires, suitable for efficient spraying work on larger agricultural plots, hydraulically folding 28 meter spray boom, Müller control system, Müller Trail Control, 9 sections with section shift, hydraulically braked chassis, keg cleaner, wide 520 agricultural tyres, trailed version, year of manufacture: 2011, serial number: G02323, chassis number / VIN: 10151500198, tank capacity: 5,000 litres, working width: 28 metres, number of sections: 9, permissible gross weight: 10,250 kg, permissible support load: 1,830 kg, permissible axle load rear: 8,420 kg, length 8,50  ...

Case maxxum 5120, Stands on fat tires, Powershift on the gearstick, 10500 operating hours, Front linkage, Air, 2 air horns on the roof, Drawbar with k80, Lift with catch hooks, 3x double-acting valve, Hydraulic brake valve, Auction-ID: A1-40139-33

New Victron Energy 3-Phase Storage System – 3× 5 kVA MultiPlus-II with 45 kWh LFP Battery (3x 15 kWh LFP Battery) Offered is an installed and programmed professional 3-phase energy storage system from Victron Energy, consisting of 3× 5 kVA MultiPlus-II inverter/chargers in combination with a 45 kWh lithium iron phosphate (LFP) battery. This system is ideal for homes and businesses with a 3-phase connection, and for applications such as solar energy storage, peak load, emergency power supply and hybrid or off-grid installations. The large battery capacity ensures long autonomy and high operational reliability. ✅ Benefits • Full-fledged 3-phase Victron system (3× 5 kVA) • 45 kWh LFP battery: safe, low-maintenance and long service life • Ideal for higher power and continuous operation • Suitable for on-grid, hybrid and off-grid applications • Smart energy management and m ...

Consisting of pallet of 50 pieces polycarbonate sheet clear 10mm, 1.05m x 3.58m. Auction-ID: A1-40113-500

Equipped with: mechanical quick coupler, bucket 1400mm, bucket 420mm with teeth, height 2570 mm, width – 1990 mm, transport length (boom lowered) – 5500 mm, rear turning radius – 995 mm, max. Lateral travel arm (right, center box) – 960 mm, max. Lateral travel arm (left, center bucket) – 895 mm, max. Lifting height of blade above ground level – 415 mm, max. Digging depth sliding blade below ground level – 455 mm, undercarriage length – 2500 mm, max. Boom swing angle to the right – 61°, max. Boom swing angle to the left – 65°, Yanmar 4tnv88, water-cooled 4-cylinder diesel engine, engine power (iso) – 28.6 kW (38.2 hp), diesel tank capacity – 83 l, double variable and double gear pump, capacity – 2 x 57 + 41.4 + 11.7 l/min, working pressure (travel and working hydraulics) – 240 bar, hydraulic oil cooler, hydraulic tank capacity – 80 l, travel speeds – 2.7  ...

Equipped with: PTO speed 540/750/1000/1400, 2 double valves rear, 2 double valves side right, estimated hours around 10000 hours Auction-ID: A1-40139-31

Industrial Planetary Mixer/Dough Mixer Version on floor tripod Equipped with mixing bowl / container Mixing bowl width: 42 cm Height of mixing bowl: 40 cm Supply voltage: 380 V 3-phase implementation Frequency: 50 Hz Power: 1 HP Speed: 1450 rpm Current: 1.8 A Made in England Heavy industrial version Auction-ID: A1-40113-168

Industrial Deburring Stations – Year 2019 SEW USOCOME actuator – Pneumatic control - General Description: We offer for sale these industrial deburring stations in good condition, year of construction 2019, designed for deburring operations in industrial environments. Robust, compact and safe stations, ideal for mechanical, machining, sheet metal or industrial subcontractors. - Technical characteristics Equipment Type: Deburring Station Year: 2019 Engine : SEW USOCOME Engine type: DRN80M2/BE05/FI B3 Maximum speed: 2860 rpm Order Type: MCLTPB0015-5A3-4-00 Structure: Column station with reinforced base - Integrated equipment Pneumatic up/down Foot pedal control Adjustable protective screen Built-in light stand Complete electrical box with dimmer and protections - Benefits Recent Material (2019) Rugged industrial manufacturing Engine recognized for its reliability Quick and easy inst ...

Industrial Deburring Stations – Year 2019 SEW USOCOME actuator – Pneumatic control - General Description: We offer for sale these industrial deburring stations in good condition, year of construction 2019, designed for deburring operations in industrial environments. Robust, compact and safe stations, ideal for mechanical, machining, sheet metal or industrial subcontractors. - Technical characteristics Equipment Type: Deburring Station Year: 2019 Engine : SEW USOCOME Engine type: DRN80M2/BE05/FI B3 Maximum speed: 2860 rpm Order Type: MCLTPB0015-5A3-4-00 Structure: Column station with reinforced base - Integrated equipment Pneumatic up/down Foot pedal control Adjustable protective screen Built-in light stand Complete electrical box with dimmer and protections - Benefits Recent Material (2019) Rugged industrial manufacturing Engine recognized for its reliability Quick and easy inst ...

Toggle Press • Working height adjustable by simply loosening the clamping screws on the stand • Fine working height adjustment with HK 800 = millimetre-precise adjustment of the press head to the desired working height. The fine adjustment is done forcibly in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring Pressure 500 kN Stroke 40 mm Projection 73 mm Working height from up to 60 - 150 mm Table surface 115 x 70 mm Machine weight approx. 10 kg Condition: never used / new (5)

Industrial Deburring Stations – Year 2019 SEW USOCOME actuator – Pneumatic control - General Description: We offer for sale these industrial deburring stations in good condition, year of construction 2019, designed for deburring operations in industrial environments. Robust, compact and safe stations, ideal for mechanical, machining, sheet metal or industrial subcontractors. - Technical characteristics Equipment Type: Deburring Station Year: 2019 Engine : SEW USOCOME Engine type: DRN80M2/BE05/FI B3 Maximum speed: 2860 rpm Order Type: MCLTPB0015-5A3-4-00 Structure: Column station with reinforced base - Integrated equipment Pneumatic up/down Foot pedal control Adjustable protective screen Built-in light stand Complete electrical box with dimmer and protections - Benefits Recent Material (2019) Rugged industrial manufacturing Engine recognized for its reliability Quick and easy inst ...

Demonstration machine Speed in 6 steps 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Rotating bezel. 4-fold steel holder. Scout tub. Back wall. Spindle protection. Hardened bed rails. Longitudinal feed with left/right shift. Set of interchangeable wheels. Related tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 125 - 2000 rpm Tip height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Tailstock quill stroke 65 mm Connection voltage 230 V Total power requirement 0.8 kW Machine weight approx. 0.135 t Space requirement approx. 1.25 x 0.6 x 0.6 m Condition: never used / new (5)

Industrial Deburring Stations – Year 2019 SEW USOCOME actuator – Pneumatic control - General Description: We offer for sale these industrial deburring stations in good condition, year of construction 2019, designed for deburring operations in industrial environments. Robust, compact and safe stations, ideal for mechanical, machining, sheet metal or industrial subcontractors. - Technical characteristics Equipment Type: Deburring Station Year: 2019 Engine : SEW USOCOME Engine type: DRN80M2/BE05/FI B3 Maximum speed: 2860 rpm Order Type: MCLTPB0015-5A3-4-00 Structure: Column station with reinforced base - Integrated equipment Pneumatic up/down Foot pedal control Adjustable protective screen Built-in light stand Complete electrical box with dimmer and protections - Benefits Recent Material (2019) Rugged industrial manufacturing Engine recognized for its reliability Quick and easy inst ...

"The Plasmatreat FG 5001 plasma generator is an industrial piece of equipment designed for surface treatment applications by Openair-Plasma technology. Robust and efficient, it improves the adhesion, cleaning and activation of materials in many industrial processes. This model, offered as is, is a reliable solution for demanding production environments or recommissioning projects. Compact with dimensions of 60 cm long, 80 cm wide and 35 cm high, it can be easily integrated into an existing production line. Its weight of 55 kg is a testament to its solid construction, suitable for intensive industrial use. Designed by the Plasmatreat brand, recognized for its expertise in plasma technologies, the FG 5001 offers an efficient basis for surface treatment operations requiring precision and consistency."

BIG weld-on hook suitable for Liebherr 506, 507, 508, 509, - Year of construction: 2025, - made of S355 steel, Further recordings also available!

BIG weld-on hook suitable for Liebherr 506, 507, 508, 509, - Year of construction: 2025, - made of S355 steel, Further recordings also available!

New 21.500 litre tank, Stock number: T21.5B6-9, Litre: 21.500, Material: Stainless acid proof steel AISI 316, Item: Tank, Standing: 4 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the top, Ø 500 mm., Pipes: 3 pcs., Inner diameter: Ø 2500 mm., Cylinder: H 4180 mm., Total height: H 5330 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

with palletech Table size 800 x 800 mm Table NCRT Number of pallets 14 Movement x-Axis 1300 mm y-Axis 1100 mm z-Axis 1000 mm Table indexing 0,001° Number in tools in magazine 237 pieces Maximum spindle speed 35-7.000 min Tool taper DIN 69871A-50 CNC control M-plus

Chiron FZ18W rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 7100 RPM / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor machine can be inspected under power in our warhouse 6 ton 3,6 x 2,25 x 2,85

Machining Center - Universal HURON KX 15 Bearing No. 1105-01908 Make Huron Type KX 15 Built in 2002 Condition Used machine Control CNC SIEMENS 840D POWERLINE Storage location FRANCE Country of origin Germany Delivery time immediately Freight base EX WORK Technical details x-way 800 mm y-way 1000 mm z-way 550 mm Spindle holder ISO SK 40 Spindle speeds 18000 rpm inner cash supply 30 bar b-axis +20/-100 c-axis 360 Control SIEMENS 840D POWERLINE Factory weight 500 kg Number of tools in the magazine 30 pieces Total power requirement 53 kW Description - 5 AXIS UNIVERSAL MACHINE CNC control SIEMENS 840D Tool changer 30 pcs SK 40 5 axes simultaneously C-axis 360 , A-axis +20/ - 100 " , TABLE BY 630 mm, 30 BARS IKZ additional, accessories SPAENEFOERDERER

Table size: 700 x 1200 mm traverse path x/y/z: 600/300/350 mm spindle retainer: SK 40 ISA kl. / gr. Table/spindle distance: 150/540 mm spindle speeds: 45-6000 rpm number of tool stations: 12 pieces feeds: 5000-20000 mm / min rapid traverse rate: 5000-20000 m / min spindle drive: 5.5 kW Electr. Supply: 380 V, 12 kVA kW space: 2350 x 2100 x 2500 mm weight: 3800 kg

Table size: 550 x 950 mm traverse path x/y/z: 850/550/550 mm spindle retainer: BT 40 ISA kl. / gr. Table/spindle distance: 100/650 mm spindle speed: 8000 rpm number of tool stations: 24 pièces feeds: x/y 5-10000 / z 5-12000 mm / min rapid traverse: x/y 24 / z 20 m / min spindle drive: 11/15 kW Electr. Supply: 400 V, approx. 20 kVA kW space requirement: 2600 x 2220 x 2700 mm weight: 5200 kg

Table size: 410 x 900 Traverse path x/y/z: 560/410/380 mm spindle retainer: SK 40 spindle speeds: 22-6000 rpm feeds: x & z to 10000, y up to 240 mm / min space: 2600 x 2000 x 2300 mm weight: 3500 kg