5 axis machining used for sale

Vacuum pump Manufacturer: Kinney Type: KT-505 LP Status: used ; ready for use

Traenklein BRM; good ZUustand; cleaned and checked; Working width 500mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Siebler + Göring 5000/160E vertical four side seal strip packer for effervescent tablets, maximum foil width 160mm, currently fitted with handling and format parts for 20mm diameter tablets. Output up to maximum 150 strokes per minute. Includes a duplex module of ABB Flex-Picker robots for automatically loading an existing cartoning machine infeed (cartoner not included)

VACFOX VC 500 (formerly CLF501 of Elmo Rietschle) Rotary vane vacuum pumps DS-motor 11 kW 970 RPM 400/690 V +-10% 50 Hz Insulation class F protection IP 54 oil-ueberflutet - air cooled Pumping speed of 550 m3/h The vacuum pump is available and can be viewed like in Meersburg, Baden-Württemberg.

Built in 1997 Pile height 400 mm section height max 250 mm Infeed height 700 bis 1.300 mm Delivery height 890 mm Speed max 60.000 Ex./h Weight 980 kg (approx.) ; working condition

Upright stack delivery with pressing unit; working condition

Newtec Model: 5000C checkweigher roller conveyor serial: 1491 weighbed 350mm x 330mm, with roller outfeed conveyor, weight ranges from

Axial groove ball bearing Steyr 51220B (7 shards)

Zentrifuge Cepa Padberg GZ 500, BJ. 1994,approx. 100 kg per batch, 750 rpm Next: CEPA Padberg GZ 500 E, BJ 1994, with 125 kg swivel crane VETTER See pictures below

cast-ribbed clamping plate with T-swallowtail grooves, approx. 5400 x 2200 mm, water gutters on the face, weight approx. 8 t

Steel of carrier 12 pieces Length of 7600 mm Height 580 mm Width 210 mm Profiles: Length: 1 x Ã? 90 mm x 7600 mm 2 x Ã? 70 x 7310 mm Height: 9 x Ã? 50 mm x 420 mm 3 x 70 x 50 mm 1 x 70 x 40 mm 2 x 70 x 30 mm 1 x 70 x 60 mm 2 x D 70 x 60 x 30 mm Price: â?¬950 per 1 piece Price â?¬10000 per 12 pieces

Horizontal peeling centrifuge Peony PPCS-555 used for solid-liquid separation in chemical, pharmaceutical &food industry. Horizontal peeling joints are discontinuous filtration centrifuges that are characterized by absolute reliability, even with the highest requirements. They are used in the production of mass, raw material and fine chemicals as well as in the food industry. Manufacturer: Peony Type: PPCS-555 Year: 2013 Drum diameter: 1250 mm Volume: 370 liters Capacity: 555 kg Total 3 pieces available - Horizontal shaft trifuge with perforated filter drum. - Hydraulically actuated wide knife peeling device. - Solid discharge in one of the centrifuges with schurre, in the other two with discharge screw. - Drive via V-belt. - Application discontinuously in batch operation for mechanical solid-liquid separation. - High separation and washing effect, low residual moistu ...

Thermal laminating machine Max sheet size 580 x 740 mm min. Sheet size 210 x 210 mm Material thickness 105-500 grams Speed of 30 to 50 m / min. Mass 3660 x 1278 x 1780 mm

DEAR'S SALE, DEUTZ 6M540 2 CRANKSAFT STD 1 BLOCK COVER, LINER, CONROD, PISTON ANY PARTS Brgds Hakan KUSCU +905323642509 info@kscege

DEAR'S SALE, MAK 552AK FULL COVER, GOOD CONDITION Brgds Hakan KUSCU +905323642509 info@kscege

Styrofoam shredder, shredder for polystyrene Styro-Cut 500 Technical specifications of the Styro-Cut 500 Dimensions (DxWxH): 920 x 1130 x 1640 mm Electric motor: 11 kW/2900 min – 1, 380 V Insertion opening: Ø 420 mm Weight: approx. 300 kg Throughput capacity: up to approx. 25 m3/h depending on sieve size and material Granule size: with standard sieve 9 mm. Production of granules up to 6 mm possible Styro-Cut 500 as an independent unit for manual shredding of the polystyrene Styro-Cut 500 can be used as part of a production line for crushing polystyrene. DS-50 is used as a coarse shredder, which is equipped with the help of a conveyor belt. The material is then conveyed to the Syro-Cut 500 shredder and finely shredded. Uses: – Companies that recycle the waste styrofoam – Construction industry that uses polystyrene as heat and sound insulation – Shops that  ...

Wheel diameter: 500 mm Cutting height: 330 mm cutting width: 480 mm Motor output: 1,5 kW Table dimensions: 495 x 670 mm Table tiltable: 45 Grad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: MicroStep Type: SPL-PA 3001.15+S500 Working range: 3000 x 1500 mm + 500 mm shaft technology: plasma built in 2006 Kjellberg HiFocus 160i with autom. Gas console; (see PDF) 2 x additional quick-release co-buttons PerCut 170 Div. Wear parts Donaldson filter system including disassembly and delivery within Germany. Commissioning on request.

Vacuum pump Manufacturer: Kinney Type: KT-505 LP Status: used; ready for operation

Bolt feeders Manufacturer: Tucker Type: BV 50D.00.44/5.18F8 and BV 50D.10.01/5(12-25) There are 2 pieces. The price is for 1 PCs.

Rotary vane vacuum pump packing Manufacturer: Busch Type: 251-512 Status: used, tested! Including: oil filling Delivery time: In stock!; ready for operation

throat: min/max ca. 98-110 cm dimensions: ca. 40 x 8 x 256 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.