5 axis machine used for sale

Transnorm conveyor belt with leading belt GF 4050+4890-600-500 RA2051 Technical data: Conveyor length (NL): 8940 mm (4050 mm + 4890 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor and overdrive from belt one to belt two Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 8940 ( 4050 + 4890 ) Nominal / outside width in mm: 600 Belt  ...

Transnorm conveyor belt with leading belt GF 4070+4430 -600-500 RA2052 Technical data: Conveyor length (NL): 8500 mm (4070 mm + 4430 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor and overdrive from belt one to belt two Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 8500 ( 4070 + 4430 ) Nominal / outside width in mm: 600 Belt ...

Lippert belt conveyor GF 1810-650-500 RA1438 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1810 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor R17 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of construction: 2 ...

turning diameter: 490 mm turning length: 2000 mm control: Heidenhain MANUALplus 4110 swing diameter over slide rest: 280 mm spindle turning speed range: 1 - 3000 U/min spindle bore: 93 mm rapid power traverse in X-and Z direction: 7 / 10 m/min power capacity: (100/60 % ED) 15/20 kW tailstock quill diameter: 70 mm tailstock quill stroke: 160 mm tailstock quill taper MT: 5 max. workpiece weight between centres: 1000 kg max. workpiece weight -without tailstock: 500 kg weight of the machine ca.: 3,6 t dimensions of the machine ca.: m Features: Control Heidenhain MANUALplus 4110 2 steady rests Manual chuck with jaws Tool holder with inserts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data for the shelf: Shelving system: Meta Type: Clip The scope of delivery includes: 01x Shelf, used Soil name: MS150-III Material colour: sendz. galvanized Dimensions: 1,000 x 500 x 40mm Weight: 3.41 kg|pcs. max. load per shelf 150 kg, with the same. distributed load. 04 x Shelf bracket 40 mm, used, vzk Silver for steel shelves with 40 mm edging Surface : Zn blue + therm 4h , Galvanized Color : Silver Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Travel X/Y/Z: 1600mm/400mm/350mm, quill stroke: 350mm, max. workpiece weight: 2100kg, table dimensions X/Y: 2100mm/430mm, table height: 908mm, tool positions: 78, tool holder: SK40, max. torque: 70Nm, rapid traverse: 30m/min, feed force: 7kN. Machine dimensions X/Y/Z: approx. 4700mm/2950mm/2700mm, weight: approx. 9300kg, control: Siemens 840C. The spindle of the machine must be overhauled and was removed as well. Documentation available. An on-site inspection is possible.

This 3-axis FANUC Robodrill D21MIB 5ADV Plus was manufactured in 2023. It features a high-speed spindle capable of 10,000 rpm and a robust automatic oil lubrication system. The machine includes a center-through coolant system and a servo turret for enhanced efficiency. If you are looking to get high-quality machining capabilities, consider the FANUC Robodrill D21MIB 5ADV Plus vertical machining centre we have for sale. Contact us for further details.

CNC lathe Type: Style 510 Manufacturer: Style Year: 2021 Control: STYLE 2021 Turning Edition Swing over bed: 510 mm Swing over cross slide: 300 mm Center distance: 1350 mm Bed width: 330 mm Main motor power (S6): 11 kW Spindle bore: 80 mm Max. weight between centers: 750 kg Maximum spindle speed: 2500 rpm Spindle nose: D1-8 X and Z Axes Rapid traverse: 8 m/min Feed rate range: 2 m/min Tailstock Quill diameter: 80 mm Quill travel: 160 mm Quill taper: MT5 (Morse Taper 5) Turret: 8-position Machine in very good condition, fully functional, under power Find more here - / Contact us at -

CNC vertical machining center Type: V-50L Manufacturer: Leadwell Year: 2016 Control: Fanuc X: 1270 mm Y: 635 mm Z: 610 mm Spindle taper: SK40 Table: 1420 x 610 mm Max table load: 1000 kg New spindle in 2025 4-axis GSA with tailstock Internal cooling 20 bar Machine in good condition, fully functional, under power Find more here - / Contact us at -

Carriage length: 3200 mm; Cutting width at the width stop: 1000 mm; Cutting width at cut-to-length fence: 3200 mm; Cut depth: 200 mm; Scorer: no; Height adjustment saw blade: handwheel; Swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter maximum: 550mm; Saw blade diameter completely retractable under table: 500mm; Motor power: 9 kW; Engine brake: yes / automatic; Suction port: 100mm and 120mm;

Carriage length: 3200 mm; Cutting width at the width stop: 1000 mm; Cutting width at cut-to-length fence: 3200 mm; Cut depth: 200 mm; Scorer: no; Height adjustment saw blade: electric; Swivel adjustment saw blade: electric; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter maximum: 550mm; Saw blade diameter completely retractable under table: 500mm; Motor power: 9 kW; Engine brake: yes / automatic; Suction port: 100mm and 120mm;

Cutting length: 2500 mm; Cutting width at the width stop: 1000 mm; Cutting width at the cut-to-length fence: 1565 mm (telescopic extension up to 2550 mm); Cut depth: 170 mm; Scorer: no; Height adjustment saw blade: handwheel; Swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 500mm; Speeds: 3000 / 4000 / 5000 rpm; Motor power: 9.2 kW; Engine brake: yes / automatic; Suction port: 80mm and 120mm;

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 46400 € : 886.24 € : Doppelsäulenführung : 6800x41x1,3 mm : 20-100 m/min : 560 mm : 820 x 540 mm : rechteck 550 x 540 mm : rechteck 360 x 540 mm : rechteck 550 x 540 mm : 880 mm : 1.1 kW : 4 kW : 0.12 kW : 3800 mm : 1750 mm : 2350 mm : 3200 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller table see photo - option ...

Breadcrumb grater/mill, Fabr. Fomko, Grating Machine 500

working width: 530 mm; cutter head: Leitz - Centrofix; number of blades: 4; surface table length: 2900 mm; adjustment table: Hebel; read out out table height: Scala; surface fence tiltable: ja; motor power: 4 kW; machine length: 2900 mm; machine width: 1000mm; weight: 800 kg;

Multifuel 1Wartsila 19.5 MW CHP Power Plant with 2 × 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power, 9.0 tons/hour of saturated steam at 10 bar and 8 MW of 90C hot water . In ad ...

Turning length/ centre width 4m, Spindle inner diameter, Face Plate D 1000 m, Center height over support 360 mm, 2 Risings with roller jaw guide 1980 Retrofitted, Main spindle speed 215 - 355 rpm. Operations manual with circuit diagram, chip protection, Reversible steel holders, Supports have currently been overhauled, electric lock box, Weight approx. 15 tons, Guided tour possible, including attempted filming.

Lippert belt conveyor GF 5550-570-450 RA2488 Technical data: Conveyor length (NL): 5550 mm frame width (NB): 570 mm, 770 mm with motor belt width (GuB): 450 mm Overall height (BH): 130 mm Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 5550 Nominal / outside width in mm: 570 Belt width in mm: 450 Driven: YES Engine type: SEW Movi-Mot KW: 1,1/S1 Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, professio ...

Lippert belt conveyor GF 4585-570-450 RA2487 Technical data: Conveyor length (NL): 4585 mm frame width (NB): 570 mm, 770 mm with motor belt width (GuB): 450 mm Overall height (BH): 130 mm Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 4585 Nominal / outside width in mm: 570 Belt width in mm: 450 Driven: YES Engine type: SEW Movi-Mot KW: 1,1/S1 Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, professio ...

Lippert belt conveyor GF 3860-570-450 RA2486 Technical data: Conveyor length (NL): 3860 mm frame width (NB): 570 mm, 770 mm with motor belt width (GuB): 450 mm Overall height (BH): 130 mm Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 3860 Nominal / outside width in mm: 570 Belt width in mm: 450 Driven: YES Engine type: SEW Movi-Mot KW: 0,37/S1 Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, profess ...

Lippert belt conveyor GF 10270-570-450 RA2489 Technical data: Conveyor length (NL): 10270 mm Frame width (NB): approx. 570 mm Belt width (GuB): 450 mm Overall height (BH): 130 mm Support feet optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor, R37 DRE80M4/TH/Z Electrical data: 50Hz V380-500, kW 0.75 / S1 Return pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 19270 Nominal / outside width in mm: 570 Belt width in mm: 450 Driven: YES Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie  ...

Lippert alignment conveyor inclined roller conveyor 2050-650-530 RA2490 Make: lippert Year of manufacture: Roller width (RB): 530 mm Nominal/outer width (NB): 650 mm Length: 2050 mm Diameter rollers: 50 mm Distance between rollers: 60 mm Roller conveyor motor: SEW drive motor frame height: 100 mm Conveyor speed: contact us Angle rollers: ca. 5° Optional: supports Side guide adapted conveyor speed range with frequency converter Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: gut nominal voltage: 380-500V angle: ca.5° Conveying length in mm: 2050 Nominal / outside width in mm: 650 Roll width in mm: 530 Roll division in mm: 60 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: ohne Frequenzumrichter, without supports and side guides For individual, expert advice, simply get in  ...

Laminating press manufactured in 2010. This LIGMATECH MPH 510/25/09 features an integrated assembly line setup with a total length of approximately 26 meters, including an entry section. It includes a cross-transport belt drive, working height adjustment, pre-selection of pressing time, and light curtain safety with 4-way muting. If you are looking to get high-quality laminating capabilities, consider the LIGMATECH MPH 510/25/09 machine we have for sale. Contact us for further details.

Control: Manufacture: FANUC 21-M x-travel: 1020 mm y-travel: 510 mm z-travel: 575 mm table-size: 1200 x 500 mm spindle turning speed range: 60-8000 U/min tool magazin:: 24 weight of the machine ca.: 7.5 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26027 Technical data: - Max. pressing force 32 t - Max. ram stroke approx. 250 mm - Max. installation height 350 mm - Pitch per revolution of the handwheel approx. 48 mm - Stand width / passage approx. 575 mm - Table support surface with 4 diagonal T grooves 575 x 475 mm - Printing plate area 500 x 260 mm - Tool holder at the top 30 mm - Through-hole in the table 200 mm - Space requirement approx. W + D 1000 / 1500 x H 2000 / 2400 mm - Weight approx. 1000 kg

Nowicki Vakuum tumbler -Typ: MA-G-5400 -Kapazität: 5400 l -Max. Beladung: 2700 kg -Mit Kühlung -Antriebsleistung: 8,2 kW -Gewicht: 2900 kg -Abmessungen: 4150 x 1900 x 2350 mm -Stromversorgung: 3 x 400 V -Aus Edelstahl -Einsatz mit Band- oder mechanischer Beladung -Verfügbar: 2 Stück -Zustand: Gebraucht, sehr gut, generalüberholt, sofort einsatzbereit

Key data: 800 KW, 400 V

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

Manufacturer: Wolf Power Systems Model: GTK 50E0 Year of Manufacture: 2021 Type of Machine : CHP UNIT Condition : Never used, never even connected CE Certified: Yes Technical Specifications • Engine Type: Hoeckle HMG 434 S • Generator Type: Marelli MXB-E 225 MA/4 • Fuel: Natural Gas H (Erdgas H) • Electrical Output: 50 kW • Thermal Output: 90 kW • Power Consumption: 146 kW • Gas connection pressure range: 25 to 60 mbar • Maximum operating pressure: 4 bar • Maximum coolant inlet temperature: 90 degrees C • Rated voltage: 400 VAC 3PH 50Hz • Supply fuse: 100 A • Protection class DIN VDE 0470: IP 22 Find more here - / Contact us at -

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. control: Memory-Funktion Weinig Powermat 500 with grooved table ---------------------------------- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----------------------------------------------- Motor with ...

Wickert high-precision hydraulic press WKP 5000 S with sliding table. Total pressing force 5000 kN. Table size 1800 x 1200 mm, installation height min 800 mm, installation height max. 2300 mm. Opening stroke 1500 mm. Sliding table extendable 1500 mm. Year of construction 2011 very good condition. available from week 22/2026.

Absolutely new belt dryer make New Eco Tec Woody 500-100-1.0 SP, built in 2019. Very well preserved, as good as new facility. Immediately available. Suitable for drying fines up to 1.5 to/h. Input moisture up to 50%. Water evaporation up to 500 kg/h! Heating medium warm air 90°C to 110°C. Takeover possible immediately!

Micro Brewery 2-Vessel 5hl Braukon 750hl / annum The brewery is a modular 5 hl two-vessel Braukon brewhouse system with a separate whirlpool, designed for production of both top- and bottom-fermented beers. Brewing is controlled with manual valves, but brew vessels and temperature controls are made with Braukon brew control PLC. Upto 18° Plato high gravity beer production is also possible with this brew line. Brew vessels are bottom heated with hot water generated with plate heat exchanger from low pressure steam and wort is heated with external boiling system. The 2-vessel system is constructed entirely in stainless steel (AISI 304) and delivered as a fully integrated, pre-piped and pre-wired unit, enabling rapid relocation works. Nominal capacity is 3–4 brews per day, depending on recipe and process parameters which is approx. 750 hl/annum. Brew control is semi-automatic and made ...

Used Van Dam 520-6, UV-COM, 6-Color Cup Printing Line, Age 1999:, Auto Elevator Tray Feeder, Auto-cross feeder conveyor, Standard Van Dam Goose Neck infeed to main print unit, Universal Screw Denester, Mandrel Spin System, SOFTAL Corona Pretreater with Leak tester, Main 6-Color Print unit. Modern New Style Print Heads, Each Print head consisting of : 8 x precision ground rollers, 2 x Oscillating Rollers water cooled, Gear driven Fountain Rollers, Ink Well with Ink Agitators, All six heads swing open for easy plate mounting and free roller accessibility, All pressure and color register adjustment can be made while printer is running, Easy access to product handling areas and print area, No cup no print system, Double cup detection, Main Inverter Drive. Speed continuously variable., UV-On Mandrel Curing System: UVITERNO MONO-JUMBO-8015., Dual Timing Belt Take-Off, Exact Count, dual chromed ...

CRAMMED FEEDING UNIT, reconditioned, This unit can be synchronized to feeding screw from buffer silo and horizontal screw in extruder to grant a uniform, continuous feeding, for light scraps, mounted on a 130 mm extrusion line, totally reconditioned, possible addition of mastebatch feeder, availability: in stock, conditions: reconditioned, type: for up to 700 kg/h extruders

DECOILER   design: twin reel   coil weight max.: 0.5 to   max. diameter of coil: 1600 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1500 mm   space requirements -front/back-: 2100 mm   total height: 2200 mm   total weight approx.: 1570 kg - Double reel - Load capacity 1600 kg - Spreading range 270 - 550 mm - max. sheet width 150 mm - 3 pressure arms - Speed approx. 20 m/min

Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton

Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm Control: Siemens S7

Trumpf TruBend Cell 5000Year of manuf. : 2018 Control : ____________Description:Technical dataYear of manufacture:2018Pressing force approx.:3200 kNFolding length approx.:4420 mmControl system:TASC 6000Projection:420 mmFree upright clearance approx.:3680 mmUsable installation height approx.:615 mmMachine weight approx.:23400 kgEquipment:- Sturdy machine frame:- Press beam, stress relieved with high bending strength:- Spherical bearing of the press beam (inclined position):- Electro-hydraulic top drive with 4-cylinder technology:- Optical set-up and positioning aid:- Generous edge clearance:- Flat front covers:- Block hydraulics:- Electronic pressure compensator:- Measuring system with glass scale and deflection compensation:- Hydraulic oil in the machine (lifetime lubrication):- Oil cooler:- Control cabinet cooling via air-to-air heat exchanger:- Modern machine designExtended equi ...

Lippert belt conveyor GF 5030-570-450 RA2496 Technical data: Conveyor length (NL): 5030 mm frame width (NB): 570 mm, 770 mm with motor belt width (GuB): 450 mm Overall height (BH): 130 mm Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 5030 Nominal / outside width in mm: 570 Belt width in mm: 450 Driven: YES Engine type: SEW Movi-Mot KW: 1,1/S1 Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, professio ...

Lippert belt conveyor GF 5300-570-450 RA2495 Technical data: Conveyor length (NL): 5300 mm frame width (NB): 570 mm, 770 mm with motor belt width (GuB): 450 mm Overall height (BH): 130 mm Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 5300 Nominal / outside width in mm: 570 Belt width in mm: 450 Driven: YES Engine type: SEW Movi-Mot KW: 1,1/S1 Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, professio ...

Key data: 19560 KW, 11000 V

Multifuel 19.5 MW Wartsila CHP Power Plant with 2 x 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power and 9.5 tons/hour of saturated steam at 10 bar. In addition, the delivery includes an ...

Year: 2017 - technically efficient, ready to work – after full service - split heads - pneumatic drive - maximum profile height: 160 mm - resistance unit lowered under the table - hydraulic lock for reversing the resistance unit

Steam Boiler CHP Power Plant with 240 MW Pyroflow CFB Boiler A combined heat and power (CHP) plant in very good condition, with an electrical capacity of 88 MVA and a thermal capacity of 240 MW. The plant is designed to operate primarily on wood-based biomass, with coal as a backup fuel. This is a complete power plant, still in full operation, and includes all technical systems from fuel feeding to the dispatch of electricity and live steam. The equipment has been exceptionally well maintained and extensively upgraded throughout its lifetime, meeting the most stringent modern quality standards. The steam boiler utilises Circulating Fluidised Bed (CFB) technology with the commercial-type PYROFLOW, manufactured in Finland by Ahlström in 1989. This CFB boiler delivers a steam flow of 100 kg/second at a pressure of 137 bar and a temperature of 535ºC. The primary fuel has been wood-ba ...

Diesel Generators 1600 kWe / 50Hz with CAT 3516B engines and local control panel We have multiple identical CAT 3516B skid-mounted diesel generating sets available, all manufactured in 2018 and installed in the same HFO power plant, complete with full HFO plant auxiliaries. Each engine is coupled to a 2000 kVA / 415 V / 50 Hz brushless synchronous alternator via a flexible coupling, both mounted on a rigid base frame. These units are optimized for low emissions, high efficiency, and continuous base load operation. The generators have been serviced exclusively by the local CAT dealer and have only 1,500–2,000 operating hours. The standard scope of supply includes: • Engine control panel (EMCP 4) • 24V electric starting system • Radiator cooler Balance of Plant (BOP) equipment is available for customers requiring multiple units. Technical data Engine type CAT  ...

Stock number: 4029 Suction Manufacturer: 3NINE LINA, Type: LINA 500 Oilmist Separator Machine NO.: LI500-65-CC-543, Year of manufacture: 2006 Specifications: Fence effect 500m3/hour m/3 Motor power 0.55 Kw Cleaning oil mist (cutting fluid/coolant) Min./max Degree 5-50 Degree Height: 840 mm, Width: Dia. 480 mm, Weight: 30 kg

Potence pour révision de centrifugeuse décanteur Alfa Laval

Transnorm belt conveyor GF 4365-600-500 RA2493 Technical data: Conveyor length (NL): 4365 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 45 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 4365 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: 1,30 Co ...

Transnorm Rising falling Incline belt conveyor with leading belt GF 800+4650+560-600-500 RA2494 Technical data: Conveyor length (NL): 6100 mm ( 560 mm arch + 4650 mm riser segment + 800 mm leading ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 6100 ( 8 ...