5 axis machine used for sale

Travel distances: 500 x 450 x 400 mm [ X x Y x Z ] Number of axles: 5 Rotary swivel table HEM 500 U 3+2 Control: Heidenhain iTNC 530 Spindle holder: ISO 40 / BT 40 Spindle speed: 12000 rpm Tool changer: 30 - fold Drive power : 20 kW Torque : 75 Nm Rapid traverse: 30 m/min Spindle cooling Conveyor Diameter 500 mm IKZ 20 bar ITC 5X Intelligent Thermal Control Oil trap Minimum quantity lubrication Oil mist extraction Blowing air through tool screw Mobile handwheel Glass scales Encoder B-axis Encoder C-axis Tool probing system (TS27R OMP40 Probe

turning diameter: 1040/1900 mm turning length: 2000/3000/1250 mm swing diameter over bed slide: 740 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Make: EST-Ticino type: 520/2000 distance between centers min/max: 2000/3000 mm center height 520 mm Max. turning diameter over bed 1040 mm Max. turning diameter over support 710 mm max. turning diameter/length 1900 x 1250 mm spindle passage 135 mm with 3 jaw chuck with 4-jaw chuck quick change holder in very good and immediately ready condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SERVOMOTORE

TFT DISPLAY

Servomotore

Drive CC - DC

Servomotore

SERVOMOTORE

Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: on a solid mobile base -Clamping table: 415 x 415 mm -Table height: 845 mm -Sheet thickness: 90 mm -Base: 2 support casters, 2 swivel casters with locking brakes -Dimensions: 530/530/H845 mm -Weight: 162 kg

Mondini Tray Sealer High speed, twin lane tray sealer 4 across tool Has been used for packing ground meat in MAP trays.

Mezzanine / Sigma Profilbau / Industrial Platform (Top Condition) For sale is a high-quality mezzanine / Sigma Profilbau built in 2017, ideal for industry, logistics, warehousing or production. The system is solid and suitable for high loads – perfect for expanding storage areas without new construction Technical data: Profile : Sigma Total area: approx. 33 m x 30 m (≈ 990 m²) Floor height (upper edge): approx. 4.10 m Lower edge of the stage: approx. 3.80 m Load capacity: 500 kg/m² Column grid: 2.80 m x 4.40 m Railing height: 1.10 m Stairwell: 1 piece available Year of Make: 2017 Flooring: 38mm wood ⸻ ️ Description: Robust Sigma Profilbau platform Very good condition – can be used again immediately Large contiguous area → ideal for storage, order picking or conveyor technology Flexibly adaptable / expandable thanks to the grid Perfect fo ...

Machine Details Stock number 1105-03824 Machine type machining center - vertical Make CINCINNATI Type SABRE 500 Year of construction 1995 Control type CNC Storage location HAGUEANU FRANCE Country of origin Great Britain Delivery time immediately Freight base AB HAGUENAU FRANCE Technical details x-travel 500 mm y-travel 510 mm z-travel 510 mm Table size 950 x 520 mm Spindle holder ISO 40 Spindle speeds 60 - 6000 rpm Spindle drive motor 5.5 kW Rapid traverse 24 m/min Tool changing device 21-fold CNC control HEIDENHAIN TNC 415 Operating voltage 380 V table load 750 kg Projection 550 mm Total power requirement 30 kVA Machine weight ca. 4 t Information - Control: HEIDENHAIN 415 - Coolant device - Machine light

Machine Details Stock number 1105-03832 Machine type machining center - vertical Make CINCINNATI Type SABRE 500 Year of construction 1995 Control type CNC Storage location FRANCE Country of origin Great Britain Delivery time immediately Freight base EX LOCATION HAGUENAU Technical details x-travel 500 mm y-travel 510 mm z-travel 510 mm Table size 950 x 520 mm Spindle holder ISO 40 Spindle speeds 60 - 6000 rpm Rapid traverse 24 m/min Spindle drive motor 5.5 kW Tool changing device 21-fold CNC control FANUC OM Operating voltage 380 V table load 750 kg Projection 550 mm Total power requirement 30 kVA Machine weight ca. 4 t Information - Control: HEIDENHAIN 415 - Coolant device - Machine light

technical details: - Volume flow (V): 8,000 m3/h - Shaft power (Pw): 18.5 kW - Shaft speed (nw): 2717 rpm - Diameter intake manifold (suction side): 360 mm - Dimensions outlet opening (pressure side): 400 x 255 mm (inside), 48 x 335 mm (outside) Engine: - Power: 22 kW - Characteristics: 400 V / 37.5 A / 50 Hz - see engine plate (photo) Dimensions (W x H x D): 1,300 x 1,100 x 1,550 mm The fan has been electrically and mechanically tested and partly repainted! (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.

Refer to code 1024 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1026 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1028 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1032 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

8 Color Stack UV Flexo Printing Machine Overhauled 2020 with installation IST MBS 7 UV system in 2020. Substrates: OPP,BOPP,PET,PVC,OPS,paper,aluminium foil. Print width max 560 mm, Material width max 580 mm 8 flexo printing units Speed 200 m/min, Camera (E+L) Register control (E + L

; Power [PS]: 136; Gross weight [kg]: 13000; Accessories: Tanker, Battery, Control Panel, Stahldach, Input: AC socket: 3P/5W, 1x500kW - DC socket: 3x50kW - AC socket: 3P, 1x60kW, Output: AC socket: 3P/5W, 1x500kW; Water Tank Volume [l]: 800

max. format 36.50 x 52 cm Year of construction: 1998 Shed feeder Ryobi Filmfechtwerk SuperDampener Cooling unit MGE ECO Plate quick-release rails Dry pollinators Delivery date: immediately Price on request. We deliver and install worldwide!

Transformer station with precast concrete building L = 5.50m, B = 3.00m, H = 1.00m + 2.70m - Three-phase cast resin transformer - Low-voltage distributors - Undermeasurement - Mains protection component

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Control SIEMENS Swing diameter over bed 350 mm Turning diameter 180 mm Distance between centers 500 mm Spindle speed 4000 min-1 Tailstock Multifix Accessories

BVM Compacta 5015 incl. tunnel Built in 2000 In stock and ready for immediate use

Emulsion mixer Volume : 500 ltr. Material : areas in contact with the product in stainless steel;

BVM Compacta Konti 5015 MY 2005 BVM SC 4030 SD Bj 2005 BVM TB 400 Bj 2007 BVM inlet conveyors

Key data: 500 t

DURENDUS 500 T Workshop Press – Single Column Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 46.950 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement of ...

Formato 54 x 72 cm

BOWL CUTTER, TVALL TYPE: CRI-50AC Technical description: Serial number: 9.089.403 Speeds: 2 Bowl capacity: 50 Lt Power supply: 380-440V/50-60 Hz Dimensions: 1300 x 1000 x 1350 mm

cascade separator, vibrating chute, vibrating conveyor, vibrating chute, vibrating chute used Manufacturer: KARL MERZ AUFBEREITUNGSTECHNIK Type: ULA 570/50-650 built: 1987 Gutter approx. 500 x 1000 mm 2 vibrators each 0.84 kW Overall dimensions approx. 1300 x 1300 x 1400 mm e.g. For the separation of granules with shape defects, e.g. angel hair, double granules This cleaner was used for plastic granules. Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

Inlet: approx. 1600 x 1600 mm Rotor width: approx. 1600 mm Rotor diameter: approx. 560 mm

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blades: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blades: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

Speed control unit GAC-ESD5550 3 pieces available, 1x with original packaging, 2x without

Speed control unit GAC-ESD5131 1 piece(s) available, with original packaging

Weibert WBBS 555 profi Log band saw The log band saw is intended exclusively for sawing soft, hard, dry and frozen materials, logs or prismatic workpieces. Their length depends on the design of the machine. The material is laid on the supports of the railway path and fastened. The sawing unit is fed manually. Max. trunk diameter 555mm Max. board width 530mm Max. saw blade stroke 540mm Min saw band stroke 20mm Max. cutting depth 220mm Cutting length 3.7m Min. cutting length 0.9m Motor power drive 5.5 kW Impeller-D: 400mm Wheel width: 25mm Saw blade: 3200 x 27 x 0.9mm Waste 1.5-2.2mm Saw band speed. 15 m/s Electric height adjustment of the band saw blade Width 1750mm Height 1450/1660 Weight 360kg WJ-WBBS-555 Optional: Extension section 2.3m Aspirator Swivel bar

Very well maintained shrink tunnel , 400 V, 13 KW

clamping force: 6500 kN injection volume: 2011 / 323 cm³ screw diameter: 80 / 45 mm platen size: 1450 x 1350 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG ergotech 650-5200-610 incl. handling injection unit 1: - Screw diameter: 80 mm - injection volume: 2.011 cm³ - weight: 1810 g injection unit 2: - Screw diameter: 45 mm - injection volume: 323 cm³ - weight: 290 g Clamping unit: - Clamping force: 6500 kN - Centring: 200 mm - Platen size: 1450 x 1350 mm - Mould size: 1000 x 910 mm - Mould thickness min.: 450 mm - Mould thickness max.: 950 mm - 2x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 245 kW - Dimensions L/W/H: approx. 10,100 x 5,500 x 5,000 mm - Weight approx.: 36,000 kg Further DEMAG plastic injection mould ...