127,294 used machines on RESALE, but how to find them? Machine Search
Mobile ring trough mixer with 2 exchangeable mixing blades and 1 exchangeable side scraper for mixing smaller quantities of concrete.
HBS 533 band saw new Engine: 1.5 KW/ 400 V Cutting height: 270mm Cutting width: 514mm Roll diameter 530mm Precision roller guide Band length: 3865mm Table inclination -10°-+45° Weight: 163kg
Multi Panel, MP370 KEY-12 TFT, 6AV6 542-0DA10-0AX0, Siemens, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.
1. EQUIPMENT OVERVIEW SIEMENS SGT-500 GAS TURBINES Quantity: Two (2) Units Available Condition: New Surplus / Zero Hours Manufacturing & Storage • Manufactured in 2007 • New surplus, never used • Zero operating hours • Stored strictly in accordance with OEM preservation procedures • Originally supplied for an FPSO project that was cancelled Certification • Marine Rated • DNV (Det Norske Veritas) certified 2. GAS TURBINE – TECHNICAL DATA • Model: Siemens SGT-500 • Configuration: Single-shaft industrial gas turbine • Fuel: Dual fuel – Natural Gas / Diesel • Frequency Capability: 50 / 60 Hz Power Output (ISO conditions – indicative) • Natural Gas: approx. 17.4 MW • Diesel: approx. 17.0 MW (Output may be slightly higher depending on site conditions) Performance • Specific Fuel Consumption • 221 g/kWh (Na ...
pressure control valve, R6V10 595 W0 B1 220, Denison, mint condition Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.
Product number: 1982 Type: Unicut 547 Serial number: 5435 Year of construction: 2006 Block size: max 1200 x 640 x 380 mm Cutting width: 680 mm Thickness: 10 - 60 mm Air pressure: 6 Bar, 500 L/min. Power: 3 x 400V, 50Hz, 15kW Dimensions: 3400 x 1300 x 2650 mm Weight: 2500 kg Type: Galan 930 Serial number: 5431 Year of construction: 2006 Product size: max 370 x 160 mm Product length: 6 - 130 mm Cutting set: 20 mm Belt width: 360 mm Air pressure: 6 Bar, 20 L/min. Power: 3 x 400V, 50Hz, 7kW Dimensions: 4350 x 1250 x 1700 mm Weight: 1000 kg
1998 3D Systems SLA 5000 BUILDING SIZE: 500X500X800mm YEAR OF PRODUCTION: 1998 CONDITIONS: PERFECTLY WORKING, CUSTOMIZED LASER, 218Mw (20.000 WORKING HOURS) LAST MAINTENANCE DONE LAST WEEK (WE CURRENTLY DO 1 MAINTENACE A YEAR BY THE SPECIALIZED TECHNICIAN)
3x Narrow aisle forklift / high-lift order picker, Jungheinrich, EKX 515k / EKX 516k, lifting height 9.78m, 1.45 to 1.6 to load capacity – used - : Price per piece, ex site, dismantled, packed and loaded (net): Forklift 1: only 8.500.-€ (without charger) Forklift 2: only 14.500.-€ (without charger) Forklift 3: only 13.500.-€ (without charger) Price for all 3 forklifts together (incl. 1 charger): only 29.500.-€ Manufacturer: Jungheinrich Stacker 1: Type: EKX 515k Year of Make: 2015 Serial number: e.g. FN497998 Operating hours: No.13400522: 28.460h Nominal load capacity: 1,450kg Battery Voltage: 80V Leeward weight (without battery): 7.204kg Option: G+I 120 800ZT Load center of gravity: 620mm Drive power: 7.6kW Battery Weight: 1480/1636kg Lifting height: max. 9,780mm Stacker 2: Type: EKX 516k Serial Number: FN559312 Year of manufa ...
Used Rubber Mixing Mill for Sale – C.M.P. 560 x 1500 We offer for sale a used rubber mixing mill manufactured by C.M.P., suitable for rubber compound processing in industrial applications. Technical details and equipment: Manufacturer: C.M.P. Roll size: 560 x 1500 mm Equipped with stockblender for improved mixing and compound homogenization Pneumatic rubber cutting knives Heavy-duty, robust industrial design The machine is in used condition and has been operated under standard production conditions. It is well suited for rubber processing plants and compound preparation lines. Please feel free to contact us for further information or to arrange an inspection.
Capacity: 1016kWh, Nominal power kW: 800, Nominal power kVA: 1000, Nominal voltage (50Hz): 400 , Protection: IP54, Heating cooling system: HVAC , Max current (A): 1600, Nominal current discharge (A): 400, Discharge current (C): 1.5, Battery type: (NMC), On grid and off-grid applications: Yes; Gross weight [kg]: 16000; Accessories: Battery, Control Panel, Stahldach, 12touch screen, Fire extinguish system, AEG Bi-directional Storage Converter, 20ft Container
; Gross weight [kg]: 1414
Product number: 1993B Type: GoldFryer TBM630/5000TH Serial number: 10050409 Year of construction: 2005 Belt width: 630 mm Frying length: 5000 mm Heating: thermic oil Power: 3 x 400V, 50Hz, 11kW Dimensions: 9100 x 1900 x 2900 mm Teflon infeed, hold down belt, circulation pump, electric hoists, oil level control, CO2 fire surpression system
Machine type MIG/MAG welding system Make OERLIKON Type Citomag 506 W Connection voltage 3 x 400 volts Adjustment range 30 - 500 Ampere Switching time 60 % ED at 500 amps 100% ED at 420 amps Current setting infinitely variable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feed gearbox gearboxed 4-roll gearbox Protection up to a maximum of 300 A = 32 A over 300 A = 63 A Dimensions L x W x H 1,050 x 630 x 1,050 mm Weight 237 kg Age approx. 20 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqm 1 piece pressure reducer argon with 2 pressure gauges 1 piece spare parts box kpl. Equipped 1 piece user manual ...
Description mobile transfer BOGRAMA UEB 550 A with clocked blowing air and breakout station
Filter capacity: 16,3 m² Motor output: 5,5 kW : 5000 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
process, chiller, chiller, air-cooled, Type: TAEevo Tech 502 P3- 105 kW Refrigeration Machines, MTA S.p.A. TAEevo Tech 502P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Cold water temperatures adjustable from -10°C to +30°C. Including crank pan heating, phase monitoring, buffer tank 500 ltr. and built-in P3 circulation pump. chiller, chiller; Radiator Cooling capacity kW 105 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 17.9 Available pump pressure (bar) 3.42 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 55.09 Max. current (A) 93.06 Starting Current Circuit (A) 191.65 Protection class: IP54 Dimensions: Length (mm) 3298, Width (mm) 1255, Height (mm) 2119, Weight (kg) 1748 Connection Rp 2 1/2" Serial ...
Fuselage engine Actros OM 501 LA – Euro 5 – Type 541.976 It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation and installation as well as service around the engine optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.
Semi-complete engine Mercedes Actros OM 501 LA – Euro 5 – Type 541.976/980 It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation and installation as well as service around the engine optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.
; Power [PS]: 598; Engine: Scania DC16; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 310
specifications: - Clamping area approx. 400 x 300 mm - Travel across x approx. 500mm - Travel along Y approx. 300mm - 2 Handwheels - Height 220 mm - 4 T - grooves 14 mm - Distance of the T - grooves approx. 72mm - Space required approx. W 1100 x D 900 x H 220 mm - Weight approx. 190 kg
Machine details Stock number 1105-03330 Machine type guide and pull spindle lathe Make ERNAULT-SOMUA Type Cholet 550 Year of construction 1990 Control type conventional Storage location FRANCE Country of origin France Delivery time immediately Freight base EX WORK price Technical details Turning diameter over bed 550 mm Turning diameter via support 500 mm Turning length 1100 mm Tip height 250 mm Spindle bore 52 mm Inner cone 136 Spindle speeds 32-1800 rpm Feeds - bed slide / lengthwise 0.05-07 mm/w Feeds flat slide 0.033-0.45 mm/min Total power requirement 13 kW Weight of the machine ca. 2,3 t Space requirement approx. 2870 x 940 x 1400 m Information accessories: PARAT steel holder 4 STUCK 3 bake lining dia 250mm 2 AXIS DIGITAL
Key data: 4 KW, 230 V
Inverter generator set 4 kW - NEW DUAL Fuel - Gasoline / Gas - Power: 4 kW (petrol operation) - Power: 3.8 kW (gas operation) - Voltage: 230 volts - Frequency: 50 Hertz - Inverter technology - Tank capacity: 8.3 liters - Consumption: 1.5 liters/hour (50% load) - Dimensions (L/W/H): 59 x 45 x 51 cm - Weight: 48 kg - Socket: 2x 230V Schuko - USB port / socket - 12V socket for charging the battery - ATS connection - Overload protection - Low oil level warning - Wheelset and fold-out handle for pulling - Electric - Start and Cable - Start - Digital display (volts / hertz / hours / kW) ---> 2 identical inverters can be connected and synchronized to obtain a total output of 8 kW. - - - - - Advantages of an inverter generator set: The inverter technology ensures a permanently constant voltage, so that even sensitive devices can be operated without any problems ...
Simatic S7 1500 CPU, 6ES7 515-2AM01-0AB0, Siemens, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, - We assume that the device has never been used, but cannot say for certain. Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for ...
planetary gearbox, 582 32 026, n1 3000rpm, i=10,8, 5,7KW, Atlanta, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical specifications: - 5.7 kW, n1 3000 rpm, i = 10.8 Connection on motor side: - Shaft D40 mm, centring D162 mm, pitch circle D184 z=4 Output side connection: - Bore D32 mm, centring D130 mm, pitch circle D165 mm z=4 Design without additional base plate 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of ...
planetary gearbox, 582 32 025, n1 3000rpm, i=10,8, 5,7KW, Atlanta, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical specifications: - 5.7 kW, n1 3000 rpm, i = 10.8 Connection on motor side: - Shaft D40 mm, centring D162 mm, pitch circle D184 z=4 Output side connection: - Bore D24 mm, centring D130 mm, pitch circle D165 mm z=4 Design without additional base plate 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of ...
planetary gearbox, 582 32 027, n1 3000rpm, i=10,8, 5,7KW, Atlanta, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - has very slight storage marks, no effect on function - The gearbox was open stored and contaminated with oil mist, which was very difficult to clean. Technical specifications: - 5.7 kW, n1 3000 rpm, i = 10.8 Connection on motor side: - Shaft D40 mm, centring D162 mm, pitch circle D184 z=4 Output side connection: - Bore D38 mm, centring D180 mm, pitch circle D215 mm z=4 Design with additional base plate 23mm thick 6 months warranty We give you 6 months warranty for these goods from t ...
planetary gearbox, 582 32 025, n1 3000rpm, i=10,8, 5,7KW, Atlanta, used Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - the part was dismantled from a machine, Technical specifications: - 5.7 kW, n1 3000 rpm, i = 10.8 Connection on motor side: - Shaft D40 mm, centring D162 mm, pitch circle D184 z=4 Output side connection: - Bore D24 mm, centring D130 mm, pitch circle D165 mm z=4 Design without additional base plate Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 ...
Double-acting hydraulic cylinder, CK-80/56x0800-L004-H-B1X, Atos, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical information: - Double-acting hydraulic cylinder with swivel eye - Specially manufactured for Frech/Weingarten die casting machines - Suitable for GDK 2000 to GDK 4100 machines - Frech item number 949390 - Piston diameter 80 mm, piston rod diameter 56 mm - Max. stroke 800 mm, piston rod thread M27 x 2 - Centre of swivel eye to retracted piston rod face 510 mm - Swivel eye d40 mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund th ...
Maximum turnerable diameter: 1040 mm Turning diameter above the wagon: 620 mm Maximum workable length: 5200 mm Spindle power: 40 kW CNC ECS Optical line measurement system Maximum flow between tips: 10 tons Machine complete with chip evacuator, 4-position hydraulic turret, safety shelters in compliance and spindle 3-jaw hydraulic self-centering AUTOBLOCK; Various accessories available (tool case, stretchers, lunettes...) EC 2018 remarking possibility
Key data: 4 , 12
Air compressor Industrial quality at an affordable price. Fully equipped with: Shamal Compressor Pump (Made in Italy) Two-stage, oil-lubricated pump. Condor Pressure Switches (Made in Germany) With thermal motor protection. Pressure reducer. Also available with 15 bar. The compressor has an oil-lubricated, industrial-grade two-cylinder cast iron pump. The low speed ensures quiet operation. The compressor is equipped with an integrated thermal protection for the electric motor. A pressure regulator and a pressure reducer are also installed. These compressors are often used in the commercial sector. Industrial quality. They are used, for example, where compressed air is needed around the clock. Maintenance accessories are available from stock. All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (a ...
Main technical data: - Tip distance: 6000 mm - Tip height: 640 mm - Lathe complete with spindle, tailstock and tool turret
; Gross weight [kg]: 4830; Engine: Cummins 6ZTAA13-G4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 800
maximum number of results exceeded
please refine your search
