5 axis machine used for sale

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4300 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It has a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4300 CX machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4000 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It offers a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4000 CX machine we have for sale. Contact us for further details.

Clamping force: 2000kN, locking force: 2200kN, max. opening stroke: 570mm, min. mould installation height: 310mm, max. mould installation height: 660mm, max. distance between mould platens: 1230mm, mould platen dimensions: 830x830mm, distance between tie bars: 560x560mm, max. mould weight: 3.3t, max. weight on moving mould platen: 1.7t, max. weight on fixed mould platen: 2.5t, ejector stroke: 180mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 45mm, L/D ratio: 20, injection pressure at 400°C: 2402bar, shot volume: 358cm³, shot weight (PS): 330g, max. metering stroke: 225mm, max. nozzle stroke: 400mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 80kN, installed barrel heating capacity: 13kW, material hopper capacity: 70l, oil tank capacity: 500l, screw drive: 32kW, clamping unit drive: 32kW, pump unit power: 15kW, total installed power: 92kW, continuous  ...

Inv. Num. : 9160 Type: Trumatic 500R Producer: Trumpf Created: 2003 Parameters: Compressive force: 22 t

ASB 50MB V2 injection blow molding machine Year : 2005 Working hours : 59 000h The machine is well maintained Injection Clamping force: 60 kN. Screw diameter: 44 mm. Cavity Number: 1-6 . Capacity max.: 0,03 l- 2,5 . Thread Diameter max.: 17 - 63 mm. Neck Diameter max.: 15 -60 mm. Support Ring Diameter max.: 17 - 63 mm. Body Diameter max.: 35 - 115 mm. Width Parting Line max.: 35 - 145 mm. Height max.: 150 - 300 mm. Weight max.: 22g - 129 g. Injection volume: 1532 cm³. Blow Clamping Force: 78 kN. Oil tank capacity: 250 l. Dimensions : 3.768 x 1.170 x 2.910 mm. It has a completely new pump motor and pump. + auxiliary equipments

ASB 50MB V2 injection blow molding machine Year : 2006 Working hours : 30 000h The machine is well maintained Injection Clamping force: 60 kN. Screw diameter: 44 mm. Cavity Number: 1-6 . Capacity max.: 0,03 l- 2,5 . Thread Diameter max.: 17 - 63 mm. Neck Diameter max.: 15 -60 mm. Support Ring Diameter max.: 17 - 63 mm. Body Diameter max.: 35 - 115 mm. Width Parting Line max.: 35 - 145 mm. Height max.: 150 - 300 mm. Weight max.: 22g - 129 g. Injection volume: 1532 cm³. Blow Clamping Force: 78 kN. Oil tank capacity: 250 l. Dimensions : 3.768 x 1.170 x 2.910 mm. The pumps have been replaced with new ones. + auxiliary equipments

Professional packaging machine from a renowned European manufacturer, equipped with many options and adjustment options. Suitable for packaging food (baked goods, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printing and paper products, cosmetics and textiles. Setting options: -Only "welding" or alternatively "welding and subsequent shrinking". -Welding time adjustable. -Shrink temperature adjustable. -Shrink time adjustable. -Holding time adjustable. program memory. Other characteristics: -Needle perforation via adjustable needle rings possible. -Maximum package size theoretically approx. L 550 x W 400 x H 200 mm. -Maximum film roll diameter approx. 300 mm. -Maximum film roll length approx. 600 mm. -The machine can be pushed or fixed via lockable castors. Special features/ options: -Automatic residual film rewinding -Second foil ro ...

Cleaning machine used Visually and mechanically good condition Fully functional Without warranty _ Purchased as seen Video in operation can be sent on request. Payment of the machine at pick-up or in advance by bank transfer Invoice Amount plus VAT

Complete packaging line for paper sacks (20kg) including palletizers and pallet stretchers. For bagging of e.g. horse feed. The plant is still in operation until November 2026 and can be visited.

ID2123 Liebherr Betomat III-570 year 1985-2001 complete concrete mixing plant with 3 mixers (2 x ZE1500 / 2250, 1 x ZE 500/750), Sauer dosing system (year of construction approx. 2005) Complete concrete mixing plant with 3 mixers (2 x ZE1500/2250, 1 x ZE 500/750), Sauer dosing plant (year of construction approx. 2005)

max. format 52 x 52 cm Year of construction 2002 Block Glue Press manual block gluing machine for cold glue Table model Delivery date: short-term

CHARMILLES TECHNOLOGIES ROBOFIL 510 with Charmilles control system. Travel paths X/Y/Z: 500 x 350 x 400 mm. Equipped with Erowa chuck, Erowa ITS rotary changer (24-fold), ManoSet XL, and a comprehensive clamping package. Includes additional flushing, water/water heat exchanger, and water cooling unit. Documentation available. Used, functional. Connection 3~ / 400 V / 50 Hz, power 10 kVA, current 15 A. Automatic wire tensioning, precise wire guidance, stable construction. Control console (Siemens), protective devices, emergency stop.

Part number 7987 SPECIFICATIONS - shaft width 500mm - number of knives 4pcs - max thickness of the workpiece 230mm – in advance: - latches - toothed, pulling, torsional introductory shaft - pressure - planing shaft - pressure - smooth pulling shaft - 4kW motor - electric lifting of the table top - 2 types of feed speed 8/12.5m/min - dimensions l/w/h 1000x1000x1050mm - weight 620kg ADVANTAGES – Italian production – thickness sheet used, very good condition Net price: 14900 PLN Net price: 3548 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

Key data: 5000 mm, 17000 mm, 4000 mm

5-axis CNC Turning and Milling - Year of manufacture: 1970 (modernization: 1984, 2006 and 2015) - Control system: Siemens 840D - Table diameter: 5000 mm - Maximum turning diameter: 17,000 mm - Maximum working height: 4000 mm - Milling length: 8500 mm (movable table) - Table speed (max): 40 rpm (100 kW) - Maximum table load: 100 tons Accessories: - Milling head (800 rpm / 60 kW) - Universal milling head (630 rpm) - Front slider for diameters up to 1000 mm - Grinding equipment - Angle head 90 degrees (630 rpm) - Small 90-degree angle head (450 rpm) - Multiple tools.

grinding length: 5000 mm grinding width: 600 mm workpiece height: 600 mm magnetic clamping plate, electical: 5000 x 550 mm max. dia. of grinding wheel: 420 x 127 x 100 mm autom. vertical feed: 0,001-9,999 mm total power requirement: - kW weight of the machine ca.: 15 t dimensions of the machine ca.: ca 11 x 2,5 x 3,5 m overhauled machine equipped with: - magnetic clamping plate 5000 x 550mm - hydraulic Unit - Vertical Head - inclined diamond dresser with autom. feed / adjustable speed - coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Wagner WDE 500 PLUS was manufactured in 2021. It features a max turning diameter over bed of 500 mm and a spindle speed range up to 2200 rpm. Equipped with Siemens 828 B-T control for enhanced precision and a spindle motor power of 15 kW. Ideal for robust turning operations. Machine dimensions are 3400 × 1600 × 2100 mm, weighing approximately 5000 kg. For more information about this machine, please reach out to us.

MAX DIAMETER 320 , MAX LENGTH 500

Hydraulic injection moulding machine manufactured in 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 features a clamping force of 1600 kN and a tie bar distance of 520 mm. The machine includes an injection unit with a screw diameter of 40 mm, 45 mm, and 50 mm, and a maximum shot weight of 313 g. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 160/520-600 machine we have for sale. Contact us for further details.

A complete braiding line with peripheral devices and a total of twelve Krenzler braiding machines is available. 1) 7x Krenzler SKZ 8E/54H braiding machine, years of manufacture: 2002-2004, control: Krenzler SmartCard, number of carriers: 52, max. working speed: 240rpm, weight: approx. 750kg. 2) 5x Krenzler SKZ 8E/62H braiding machine, years of manufacture: 2000-2005, number of carriers: 64, max. working speed: 240rpm, weight: approx. 1000kg. 3) Herzog SP 280E winding machine, year of manufacture: 2018, winding positions: 4, max. spindle speed: 3300rpm, bobbin diameter range: 39mm-120mm, bobbin width range: 1100mm-280mm. Including 76x mandrels and flanges, approx. 2000 bobbins, approx. 700 carriers, 545 production cards, Mirage software, collection books and sample inventory. Documentation available. An on-site inspection is possible.

B&A REF: 9291 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 402 STROKE VOLUME: 442CM3 INJECTION PRESSURE: 1946AR PLATEN SIZES: 770 X770MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 275MM MAX MOULD HEIGHT: 585MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 1085MM EJECTOR STROKE: 160MM CONTROLS: NC5 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 22 SERVO DRIVE HEATING CAPACITY: 14.8KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC

Specifications: Double wall drum with extended drum capacity Adjustable airflow and drum speed on control panel Adjustable flame modulation of gas burner controlled automatically with our roasting profile BESCA software or manual control via touch panel Cast Iron Front Lid Long-lasting, worldwide known and durable components Digital drum speed and exhaust fan speed control 2 thermocouples for bean and exhaust temperature Gas flow control on panel Separate cyclone for effective chaff removal Premix high performance burners Gas safety device and automatic ignition 4 direct drive motors Fast cooling with strong suction fans PC connection Max.Batch Capacity: 5 kg Hourly Output (kg/hour) 20 kg Roasting Time 10-14 min Cooling Time 3-4 min Burner Capacity 28 kW Required Gas Pressure (mbar) 30-50 mbar Power Requirment 1,66 kW Supply Voltage 110/220/380 Fuel Type Propane/L ...

Universal Tool Milling Machine Fritz Werner Type 5130 Extremely robust and precise universal tool milling machine from the traditional German quality manufacturer Fritz Werner (model 5130) This conventional bracket milling machine impresses with its solid grey cast iron design and maximum reliability. It is ideal for workshops, toolmaking, repair shops, demanding do-it-yourselfers or training institutions. The machine has a swivelling vertical milling head with manual quill feed (perfect for additional drilling work) as well as a mechanical feed gear. An absolute highlight is the retrofitted premium safety spindle protection from Tecno Più Technical data at a glance: Manufacturer: Fritz Werner Werkzeugmaschinen GmbH (Berlin) Type / Model: 5130 (Series 5.130) Type: Conventional universal tool milling machine Tool holder: SK 40 (steep taper with tightening rod) Table d ...

Presse à injecter ENGEL 800 T type DUO 5550/800? Nombre d’heures : 21 000 h ?Force de fermeture : 800 T - 8 000 KN? Diamètre vis : 90 mm? Volume injectable : 2 740 cm3? Pression d’injection : 1920 bars Rapport L/D : 20 Entre colonnes. : 1025 x 935 mm Dimensions des plateaux : 1570 x 1480 mm? Epaisseur moule mini : 650 mm ?Dimensions : 10 080 x 3 000 x 2 120 mm? Poids : 44 Tonnes

turning diameter: 500 mm turning length: 1000 mm control: Heidenhain total power requirement: kW weight of the machine ca.: 3200 kg t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel X/Y/Z: 500mm/380mm/350mm, tool holder: SK40, quill stroke: 50mm, speed: 4000rpm, feed: 2m/min, rapid traverse: 4m/min, table dimensions X/Y: 800mm/360mm, max. table load: 250kg. Machine dimensions X/Y/Z: approx. 1650mm/2250mm/1850mm, weight: approx. 1800kg, control: Maho 232. The Y-axis shows a malfunction from a feed rate of 50%. Documentation available. An on-site inspection is possible.

A horizontal flow wrapping machine with side sealing Hugo Beck is available. Film feed: roll, max. film width: 500mm, film web width: 550mm, max. film roll diameter: 350mm, min. product length: 100mm, product width range: 10mm-450mm, max. product height: 250mm, cycle output: 100/min, max. mechanical speed: 28m/min. Machine dimensions X/Y/Z: approx. 2250mm/1500mm/1300mm, weight: approx. 750kg. Documentation available. An on-site inspection is possible.

turning diameter: 570 mm turning length: 2000 mm control: num + CNC Keller centre height: 280 mm turning dia. over face-slide: 365 mm spindle bore: 62 mm spindle turning speed range: 3 - 2500 U/min spindle head: DIN 55 027 Gr. 8 cutting speed: Konstant 1 - 9999 m/min feed in x - axis: 0,01 - 50 mm/U feed range Z-direction: 0,01 - 50 mm/U rapid travel - longitudinal/face: 10 / 5 m/min feed power: x-Achse 7100 N feed power: z-Achse 12.500 N travel of cross-slide: 345 mm upper slide travel: 125 mm bed width: 360 mm tailstock quill diameter: 80 mm tailstock quill stroke: 190 mm tailstock taper MT: 5 max. workpiece weight -without tailstock: 400 kg max. workpiece weight between centres: 1000 kg max.workpiece weight:each extra steadyrest: 300 kg threading metric: 0,1 - 400 mm/Stg. dimensions of machine L x W x H: 3,98 x 1,87 x 1,81 m total power requirement: kW weight of the machine ca.: t A ...

Walther CN - 550 -PN Mass Grinding Machine and Rösler Z300 Turbo Floc Centrifuge -Walther Trowal CN-550-PN -1460 rpm -550 liter capacity -Motor 3.5 KW -Pneumatic soundproofing cover -Control cabinet -Dirty water / drain device -Compound - Sliding Stones 2xBoxes -Documentation -Dimensions: LxWxH 2x1.8x1.8 meters / Weight 1500Kg -Rösler - Z300 Turbo-Floc / Centrifuge -Year of construction 1996 -Rotor speed 3160 rpm -Power 4 KW -Max. throughput capacity 800 / litres / hour -Documentation -Dimensions LxWxH 1.7x1x1.6 meters / Weight 400Kg Hsbkn Aev Dlzpeu S Tol

Brevetti E. Gasparin 50COR 2, Baujahr 1999. Industrielle Flow-Pack-Verpackungsmaschine für den Einsatz mit Folie. Ausgestattet mit Temperatur- und Geschwindigkeitsregelung, manuellem und automatischem Modus sowie einer Lichtschranke. Technische Daten: 380 V, 50 Hz, 4 kW, Gewicht 735 kg.

This 3-axis SEI Laser INFINITY 5070 V300 was manufactured in 2022. It features a working area size of 500 x 700 mm and a Z-axis guide of 650 mm. The machine is designed to support materials with a maximum weight of 40 kg/m². If you are looking to get high-quality laser cutting capabilities, consider the SEI Laser INFINITY 5070 V300 CO2 laser cutting machine we have for sale. Contact us for further details.

CNC lathe GILDEMEISTER CTX 510 ECOLINE With control Siemens Year of Make: 2011 Travel in X: 300 mm Travel in Z: 1050 mm Spindle bore: 103 mm Speed range: 20 – 3250 rpm With the following accessories: Anti-slip protection 12-fold turret with 6 driven tool stations Tool measurement in the work area 3 jaw chuck hydraulic SMW Autoblock 0 315 mm Footswitch Jaw Chuck, Footswitch Tailstock Various Tool Holders VDI 40 Signal light 4 colour Tailstock with quill Chip conveyor with coolant tank 4 pcs machine shoes Operating Instructions

A Schneider hot-melt perfect binding machine is available. Cover material weight range: 82g-300g/m², max. binding length: 320mm, min. book block dimensions X/Y: 60mm/120mm, max. book block dimensions X/Y: 320mm/300mm, min. cover dimensions X/Y: 330mm/480mm, max. cover dimensions X/Y: 330mm/680mm, book thickness range: 2mm-50mm, max. binding capacity: 300books/h. Machine dimensions X/Y/Z: approx. 1400mm/700mm/1350mm, weight: approx. 250kg. An on-site inspection is possible.

grinding length: 500 mm grinding width: 230 mm table-size: 510 x 200 mm grinding wheel diameter: 225 mm weight of the machine ca.: 1.5 t Magnetic plate 1000x500mm www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Karl Schnell 595SE vacuum stuffer designed for industrial meat processing operations. This machine is used for precise portioning and vacuum filling of ground meat mixtures into casings or containers, helping reduce air pockets and improve product consistency and density. Built with durable industrial components, the 595SE is suitable for sausage production and other processed meat applications in commercial food processing facilities. The vacuum filling system helps maintain product quality and efficiency during high-volume production. in great working order, the loading is for standard loading buggies 400 L capacity. Can ship anywhere

Labeler Manufacturer: Herma Type 552 Compact Machine No. 552/8 0000 612 Floor labeller Self-adhesive labels

Find more here - .ucymachines/ Contact us at - sales@ucymachines

Technical Specifications & Performance Data The Used Kosme Labeling Machine 8T 2003, model EXTRA HOT MELT- 8T-S1-E1/504, is designed to streamline industrial packaging processes, providing efficient bottling solutions. It operates with a remarkable capacity, reaching speeds of up to 7000 bottles per hour, making it an excellent choice for high-demand beverage production environments. This machine is specifically engineered for PET containers and can accommodate various bottle formats, including 0.06 L, 0.33 L, and 0.50 L. Dimensions: Width: 2500mm, Length: 1500mm Electrical Requirements: 400V, 11kW Advanced Automation & Control Systems This Kosme Labeling Machine features advanced automation capabilities suitable for modern production lines. The user-friendly control panel allows operators to easily adjust settings to match production needs. The machine is equipped with essential safety  ...

Technical Specifications & Performance Data The Bertolaso S.GLORIA 500 is a second hand straight-cork capping machine engineered for reliable performance in beverage production environments. Purpose-built for still wine in glass bottles, this unit offers steady throughput and precise cork application suited to a used bottling line focused on industrial packaging efficiency. Manufacturer: Bertolaso Model: S.GLORIA 500 Year of manufacture: 1994 Category: Capping Machine (Straight Cork) Rated speed: up to 2,500 bottles per hour Container type: Glass Bottle formats: 0.06 L, 0.375 L, 0.75 L Number of capping heads: 1 Cap types: Straight natural cork and compatible synthetic corks (e.g., Nomacorc) Product types: Wine (Still) Rotation direction: Clockwise Condition: In storage Advanced Automation & Control Systems Designed for consistent, repeatable corking at industrial scale, the S.GLORIA 500 ...

Technical Specifications & Performance Data The Bertolaso DELTA 509 R is a robust, second hand corking solution engineered for high-speed beverage production on glass bottles. Designed specifically for straight cork applications, this 9-head rotary capping machine delivers reliable performance for wineries and premium beverage brands seeking seamless integration within a used bottling line. Manufacturer / Model: Bertolaso DELTA 509 R Year of manufacture: 1995 Application: Straight cork insertion for glass bottles No. of heads: 9 Nominal speed: up to 14,500 bph (typical throughput 3,500–14,500 bph depending on format) Cap type and size: Natural or synthetic straight corks, 22–26 mm diameter, 35–50 mm height Bottle formats: 0.06 L, 0.375 L, 0.75 L Bottle dimensions: Diameter 50–140 mm (±2 mm); Height 180–370 mm (±10 mm) Container types: Glass Electrical supply: 380 V, 50 Hz, 3  ...

Used overhauled capping machine BERTOLASO DELTA up to 6000 bph The BERTOLASO DELTA 504 R used capping machine delivers high precision for bottling applications. Specifically, Bertolaso designed this capping machine to operate at speeds of up to 6000 bottles per hour (BPH) with 4 capping heads. Furthermore, the machine accommodates straight corks, making it a strong choice for industries that need a reliable, airtight closure. Technical features and construction of the Capping Machine BERTOLASO DELTA The BERTOLASO DELTA 504 R features stainless steel construction, which ensures corrosion resistance and durability over long operational periods. Additionally, with a weight of 1390 kg, the machine provides robust support for continuous industrial use. Moreover, it includes a vacuum-ready feature for the cork, thereby enhancing the safety and reliability of the capping process. However, it do ...

CNC lathe Okuma LB 3000 EX MC 500 Control: OSP-P200L Year of Make: 2008 Internal machine no. 69 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed 530 mm Speed: 4,200 rpm Tool turret 12 places (driven) C-axis 0.001 degrees Equipment: - One touch IGF - Chip conveyors - Touchsetter - 3-jaw chuck Kitagawa B-210 - NC tailstock

Hydraulic injection moulding machine manufactured in 2001. This Krauss Maffei 125-520 C1 features a clamping force of 125 T and a screw diameter of 45 mm. It has a shot volume of 275 cm³ and a platen size of 745 x 770 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 125-520 C1 machine we have for sale. Contact us for further details.

TECHNICAL DATA: Milling shaft: Ø 40 x 550 mm Speed: 4400 rpm Table stroke: 500 mm Installed power: 11 kW

Key data: 520 mm, 250 mm, 5 kW

TECHNICAL DATA: Working width: 520 mm Working height: max. 250 mm 04 Knives Electric height adjustment 2-speed feed Installed power: 5.15 kW

Key data: 8000 kN, 90 mm

ENGEL DUO 5550/800 – 800 T Year: 2006 Operating hours: 20,600 h Clamping force: 800 t Screw diameter: 90 mm Distance between tiebars: 1,170 × 1,000 mm Opening stroke: 1,600 mm Mold height (min./max.): 500 / 1,100 mm Injection volume: 2,740 cm³ Injection pressure: 2,180 bar Options: Bi-metallic screw 2 hydraulic core pulls Robot interface Overhaul performed by ENGEL New pump

Rilecart Linea F-500 Perforator - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Rilecart Linea F-500 Perforator Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Rilecart Linea F-500 Perforator Price: 4750 EUR Download PDF Rilecart Linea F-500 Perforator This machine is in very good condition and ready to use. Electric drive, foot pedal control. Includes a 3:1 perforation tool, 4x4mm hole and a cutout for the hanger. The tool is divided into 3 independent modules. Manufacturer’s description: Perforating machine with a working width of up to 530 mm Designed for continuous operation and hea ...

CN Centerless grinding machine, ROSSI MONZA 510 CN, 2004, Fanuc electronics with touchscreen, brushless motor on Z (workpiece diameter) and regulating wheel (adjustable RPM), Grinding wheel 250 mm 510 mm dia, This machine can be inspected in our warehouse in Gussago BS Italy Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is given to them with the aid of a tool. The through-feed grinding or also through grinding and longitudinal grinding: pieces to be worked proceed uninterruptedly with axial feed thr ...

Engel 3 ES 7050 / 1 500 Duo built in 1999 against bid.

Three similar Arburg injection molding machines are available. 1) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2010, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 91917h, weight: approx. 9800kg. 2) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 82736h, weight: approx. 9800kg. 3) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 90722h, weight: approx. 9800kg. Documentation available. An on-site inspection is possible.

An industrial etching machine from a printed circuit board manufacturing facility for the alkaline development of photoresists is offered. Process sequence: infeed, etch chamber, replenisher, 3-stage rinse, drying and outfeed, max. working width: 550mm, printed circuit board thickness range: 0.2mm-4.0mm, conveyor speed: 0.4m/min-2.5m/min. Including a Nubal unstacker, a drip tray X/Y: 3900mm/1600mm and a 200l dosing unit with agitator. Machine dimensions X/Y/Z: approx. 4000mm/1300mm/1400mm. An on-site inspection is possible.