5 axis cnc used for sale

Robosoft ATL 550

Available in stock 1 x Used Capstone ECM Board. Most commonly used for Microturbines C60. The board is complete with all parts. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 1 x NEVER USED Capstone Igniter (P/N 516853-001). The equipment was NEVER USED and it is sold inside the original packaging. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

HM501, 3-fold head stitch 70. New Beckhoff PLC (Retrofit 2021)

1. EQUIPMENT OVERVIEW SIEMENS SGT-500 GAS TURBINES Quantity: Two (2) Units Available Condition: New Surplus / Zero Hours Manufacturing & Storage • Manufactured in 2007 • New surplus, never used • Zero operating hours • Stored strictly in accordance with OEM preservation procedures • Originally supplied for an FPSO project that was cancelled Certification • Marine Rated • DNV (Det Norske Veritas) certified 2. GAS TURBINE – TECHNICAL DATA • Model: Siemens SGT-500 • Configuration: Single-shaft industrial gas turbine • Fuel: Dual fuel – Natural Gas / Diesel • Frequency Capability: 50 / 60 Hz Power Output (ISO conditions – indicative) • Natural Gas: approx. 17.4 MW • Diesel: approx. 17.0 MW (Output may be slightly higher depending on site conditions) Performance • Specific Fuel Consumption • 221 g/kWh (Na ...

pressure control valve, R6V10 595 W0 B1 220, Denison, mint condition Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Available in stock 2 x Capstone Dump Valve. Complete with flexible tube. Most commonly used for Microturbines C30. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request. Voltage: 12 VDC Amps: Unit 1 - 0.135 Amps / Unit 2 - 0.750 Amps Power: 9 W Pressure: Unit 1 - 200 PSI Air/Gas / Unit 2 - 140 PSI Air/Gas

Available in stock 9 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C60. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

SPECIFICATIONS: Length of work table mm: 2700 Width of work table mm: 500

Available in stock 1 x Used Capstone TET. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Oil mist separator, extraction system, oil mist extraction, suction Brand ANAG Dimensions: wxlxh 55x68x50cm 230V, 50 Hz Quantity: 2 The price is net and is valid for 1 piece.

Available in stock 5 x Used Capstone Smart Proportional Valves. We have the following units available: - 3 x SPV Assy P/N 503044-200 complete with gaseous fuel valve P/N 506617-100 (Op. Press. 50 PSIG / Proof Press. 3500 PSIG); - 1 x SPV 25 24VOLTS P/N 511978-100R complete with gaseous fuel valve (Op. Press. 0-100 PSIG); - 1 x GSPV 12VOLTSD P/N 509736-100 complete with gaseous fuel valve (Op. Press. 75 PSIG / Proof Press 3500 PSIG): The unit are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 3 x Used Capstone Digital Power Controller (DPC Board). 1 unit is complete and the other 2 are missing the control board. The units are used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of construction: 1990 Machine no.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outdoor clearing Pulling force: 25.000kg Cutting speed: 7.2 / 8.1 / 9.6m/min Maximum tool length: 3520mm Passage width: 520mm Tool carrier clamping surface: 3520 x 460 mm Dimensions: 12.300 x 6.400 x 4650mm Power Supply: 380V 50Hz/110kW Accessories/ Special equipment: - 6 tool carriers for tool change - Machine documentation Remark / General The machines are in good condition. The machines are dismantled with us in the Bearing. The total volume of the plant comprises several trucks (approx. 70 tons per machine). The machines have produced connecting rods for passenger car diesel engines. Chain scrapers are designed for use in mass production. The continuous ( ...

Available in stock 1 x Used Capstone Digital Power Controller (DPC Board). The unit is complete. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Electric cross-cut saw KUSING SPS-500 Cross-cut saw with all-electric control without the use of pneumatic components. Technical parameters: Main motor power: 3kW / 4kW Diameter of the disc: 500mm Maximum cutting height: 160 mm Standard cycle speed: 4 seconds Option: The lifting speed can be infinitely adjusted depending on the load. Since it is possible to change the lifting speed even with a 3 kW motor, you can cut through high materials. Cycle speed: 2 - 6 seconds Ruler length and rails as needed. Price of the ruler: 85 euro/m Price of mechanical stop: 40 Euro / piece

Used Rubber Mixing Mill for Sale – C.M.P. 560 x 1500 We offer for sale a used rubber mixing mill manufactured by C.M.P., suitable for rubber compound processing in industrial applications. Technical details and equipment: Manufacturer: C.M.P. Roll size: 560 x 1500 mm Equipped with stockblender for improved mixing and compound homogenization Pneumatic rubber cutting knives Heavy-duty, robust industrial design The machine is in used condition and has been operated under standard production conditions. It is well suited for rubber processing plants and compound preparation lines. Please feel free to contact us for further information or to arrange an inspection.

Speed: 230 m/min, Full Automatic Adjustment Control, Touch & Work Technology, Memory Storage for Folding Programs, Flate Pile Feeder, 4 Pockets, 1 Knife, Anti Noise Hood, Delivery Conveyor, Standard Accessories

2 fingers parallel external gripper, pneumatic, 52.81.3.500, FLT, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. 2 Finger Parallel External Gripper, pneumatic, 52.81.3.500 Manufacturer FLT (Fibro Läpple Technologie) Clear width closed 98mm Clear width open 122mm Gripper finger length front 60mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put int ...

3 pcs. Pfeiffer Balzers TPU 170 (turbomolecular pump) 3 pcs. Pfeiffer Balzers TCP 120 (controller for TPU 170) 3 pcs. cable for TPU 170 1 pcs. Alcatel Type 5150 (turbomolecular pump) 1 Alcatel CFF 100 (controller for type 5150) 1 Alcatel 5030 CP (turbomolecular pump) Price plus 19% VAT Not tested for functionality. Please see photos for technical data. Can also be picked up.

Weibert WBBS 550 Log band saw The drive is via a 9kW petrol engine trunk diameter 555mm board width 530mm band saw blade stroke 540mm Min band saw blade stroke 20mm cutting depth 220mm Cutting length 3.7m Min. cutting length 0.9m Motor power drive 5.5 kW Wheel-D: 400mm Impeller width: 25mm Band saw blade: 3200 x 27 x 0.9mm Waste 1.5-2.2mm Saw band speed 15 m/s Electric height adjustment of the band saw blade Width 1750mm Height 1450/1660 Weight 360kg WJ-WBBS-550-BEN Optional: Extension section 2.3m Aspirator Slewing timber bar: length 4,6m

Register punch EUROTRON IND-XR 500, year of construction 2004, serial number S1-2004-1, with adjustable X-axis and Y-axis see result Photo of test, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome, by prior appointment, to visit the machine in our house.

Booster pump, CR8-140 A-F-A-AUUV, 9,5m³/h, 120m, Grundfos, used Top Used Top! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer. The pump is in top condition. Electric motor Function guarantee! For parts from second hand we can not take over conventional guarantee and warranty. But we give you a function guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

Stainless steel pressure filter, EDFR-D-060-G-530-1-V-1, 400bar, Hydac, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Manufacturer: BUSCH Type: RA 0250 D 5ZI QMZZ Capacity: 250 m3/h Vacuum pump BUSCH Typ RA 0250 D 5ZI QMZZ- USED - OVERHAULED Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT No.: PL547-17-47-669 Phone 0048/33 812 58 60 fax. 0048/33 812 58 36 infointer-wiba.com.pl abc.inter-wiba.com.pl

SUMAB R-500 MAX Fully automatic block line with concrete batching plant. Block line is in stock and ready for delivery! Technical details: • Automatic control model (with automatic operation equipment, including PLC, sensors, hydraulic valve's switching from manual to electrically operated) • Working pallet dimension: 1400 x 700 mm. • Operation area Max.: 1300 x 650 mm. With the SUMAB R-500 stationary block machine, the following concrete products can be produced in an efficient way: hollow blocks, insulated blocks, paving stones, curb stones and others. Production capacity in 8 h/100%: Hollow blocks: 12960 pieces (20x20x40 cm) Paving stone: 864-1016 m2 (10x20x6 cm)

Eillert Salad spinner Model: MSD-500-V Serial: 188 2008, Stainless salad spinner, with three baskets, 1.5Kw, 3Ph

Interroll taxiway 2.60m with drive and transfer element The Interroll taxiway element is in very good condition. Furthermore, the taxiway has its own drive motor and a delivery belt 90° to the left. Series: 5600 Width: 410mm Length: 2625mm Pitch: 75mm Load capacity: 200kg per meter Drive voltage: 400Volt Complete plant closure, wide range of mezzanine floors, pallet racks, shelving racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines More items - new and used - can be found in our shop! International shipping costs on request!

10 pcs Solenoid valve, VMPA1-M1H-K-PI, 533347, Original Festo, new Special price ! Attention: Original Festo product, no replica from.. We still have several identical and many other Festo components, but the quantity is ending. Buy more than 1 position there is still a great discount. If you have a UID number, we will gladly issue an invoice without VAT. 1 year warranty

Very nice Ryobi 524GX, year 2007, 28 mil, autoplate, all wash systems, Alcolor dampening , max 0,6 mm paper

Sinumerik CPU with function guarantee, 6FX1138-5BB04, Siemens, new New in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large automotive manufacturer, is completely new and in the original packaging. Function guarantee! For new parts from second hand we can not take over conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

Key data: 4 KW, 230 V

Inverter generator set 4 kW - NEW DUAL Fuel - Gasoline / Gas - Power: 4 kW (petrol operation) - Power: 3.8 kW (gas operation) - Voltage: 230 volts - Frequency: 50 Hertz - Inverter technology - Tank capacity: 8.3 liters - Consumption: 1.5 liters/hour (50% load) - Dimensions (L/W/H): 59 x 45 x 51 cm - Weight: 48 kg - Socket: 2x 230V Schuko - USB port / socket - 12V socket for charging the battery - ATS connection - Overload protection - Low oil level warning - Wheelset and fold-out handle for pulling - Electric - Start and Cable - Start - Digital display (volts / hertz / hours / kW) ---> 2 identical inverters can be connected and synchronized to obtain a total output of 8 kW. - - - - - Advantages of an inverter generator set: The inverter technology ensures a permanently constant voltage, so that even sensitive devices can be operated without any problems ...

Multi-purpose grabs, sorting grabs, grabs for weight class 3.5–6.5t unused! Manufacturer Haener Baumaschinen Model HMZG300R Condition Unused, never been in use, year of construction 2022 Model HMZG300 Weight class 3.5–6.5t Opening width 1206 mm Height 747 mm Width 505 mm Clamping force 29 kN/bar Net weight 300 kg Operating pressure 300 bar Capacity per litre 25 L/min Rotator Thumm 605 Stock Special price

Rakes, tear hooks for excavator attachment for weight class 1–3to unused! Manufacturer Haener Baumaschinen Model HRR30-570 Condition Unused, never been in use, year of construction 2022 Weight class 1,–3to Width 300 mm Net weight 32 kg Stock Special price

Simatic S7 1500 CPU, 6ES7 515-2AM01-0AB0, Siemens, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, - We assume that the device has never been used, but cannot say for certain. Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for ...

Planer Planer COMEVA MB 500 Working width 510mm 4-knife shaft Traditional knives Worktop length 2630mm Sampler tilted at an angle of 45° Engine power 4kw Uttering combs CE Certificate

planetary gearbox, 582 32 026, n1 3000rpm, i=10,8, 5,7KW, Atlanta, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical specifications: - 5.7 kW, n1 3000 rpm, i = 10.8 Connection on motor side: - Shaft D40 mm, centring D162 mm, pitch circle D184 z=4 Output side connection: - Bore D32 mm, centring D130 mm, pitch circle D165 mm z=4 Design without additional base plate 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of  ...

planetary gearbox, 582 32 025, n1 3000rpm, i=10,8, 5,7KW, Atlanta, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical specifications: - 5.7 kW, n1 3000 rpm, i = 10.8 Connection on motor side: - Shaft D40 mm, centring D162 mm, pitch circle D184 z=4 Output side connection: - Bore D24 mm, centring D130 mm, pitch circle D165 mm z=4 Design without additional base plate 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of  ...

Metal diesel tank - approx. 500 litres capacity - with frame and hand pump - can be driven under by forklift - - - - - Dispatch: - A Germany-wide transport is possible for an extra charge - In order to be able to give an exact freight price please send me a request with your postal code - - - - - Price: - 850,- € + 19 % VAT = 1.011,50 € - An invoice with VAT is issued - Payment: Prepayment - - - - - Other: - Sale of used machinery in actual condition to traders without warranty

planetary gearbox, 582 32 027, n1 3000rpm, i=10,8, 5,7KW, Atlanta, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - has very slight storage marks, no effect on function - The gearbox was open stored and contaminated with oil mist, which was very difficult to clean. Technical specifications: - 5.7 kW, n1 3000 rpm, i = 10.8 Connection on motor side: - Shaft D40 mm, centring D162 mm, pitch circle D184 z=4 Output side connection: - Bore D38 mm, centring D180 mm, pitch circle D215 mm z=4 Design with additional base plate 23mm thick 6 months warranty We give you 6 months warranty for these goods from t ...

planetary gearbox, 582 32 025, n1 3000rpm, i=10,8, 5,7KW, Atlanta, used Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - the part was dismantled from a machine, Technical specifications: - 5.7 kW, n1 3000 rpm, i = 10.8 Connection on motor side: - Shaft D40 mm, centring D162 mm, pitch circle D184 z=4 Output side connection: - Bore D24 mm, centring D130 mm, pitch circle D165 mm z=4 Design without additional base plate Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2  ...

Double-acting hydraulic cylinder, CK-80/56x0800-L004-H-B1X, Atos, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical information: - Double-acting hydraulic cylinder with swivel eye - Specially manufactured for Frech/Weingarten die casting machines - Suitable for GDK 2000 to GDK 4100 machines - Frech item number 949390 - Piston diameter 80 mm, piston rod diameter 56 mm - Max. stroke 800 mm, piston rod thread M27 x 2 - Centre of swivel eye to retracted piston rod face 510 mm - Swivel eye d40 mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund th ...