130,790 used machines on RESALE, but how to find them? Machine Search
x-travel: 15500 mm y-travel: 6800 mm z-travel: 3400 mm Control: Siemens Sinumerik 840 D w-axis: 2000 mm table surface area: 15000 x 5000 mm passage width: 5900 mm Passage height: 5030 mm main drive motor: 150 kW spindle taper ISO: 60 milling head speed: 6-750 (2250) U/min workpiece weight: . t total power requirement: - kW weight of the machine ca.: ca 270 t dimensions of the machine ca.: - m modernized in 2008 and equipped with: - CNC control Siemens Sinumerik 840 Dsl - movable Portal - Coolant -- Coolant through spindle -- external Cooling - set of milling heads 9ea -- high speed spindle head SLA 23 / 3 SZ (2250 U/min) -- horizontal head WFU 2100 SZ / 500 S 22 -- WFU 500 SZ / 500 S 22 -- WFU 250 B / 500 S 22 -- EFK 40 E / 600 C 22 -- EFK 250 SZ / 850 S 22 -- horizontal head HSD 250 C / 1450 S 22 -- HS 800 C / 600 S 22 -- vertical head VL 300 SZ / 65 ...
cutting diameter: 530 mm saw band length: 6670 mm cutting width: 530 mm Control: CNC main drive motor: 7,5 kW roll guideway: optional total power requirement: 13 kW weight of the machine ca.: 6,3 t dimensions of the machine ca.: m Fully automatic band saw roller conveyor Dimensions: 4000x700 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional
pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. grinding diameter: 300 mm grinding length: 500 mm workpiece length: mm Number of axles: 6 St. centre height: 220 mm centre distance: 500 mm x-axis: 500 mm y-axis: 320 mm z-axis: 320 mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m Height of centres 200 mm Distance between centres / clamping length 750 / 500 mm Table size 290 x 1,600 mm Intermediate table 110 x 1,200 mm X / Y / Z axes 500 / 320 / 320 mm Feed speeds, X, Y & Z axes 0.005 - 5 m/min Grinding head swivelling, vertical axis (B axis) 300 ° Grinding head tilting (C axis) +/- 30 ° Speed range of R axis 0 - 50 rpm Grinding spindle speeds, approx. 5,000 - 10,000 rpm Workpiece holding fixture 50 ISO Indexing 1 - 999 ° Leads 0.5 - 10,000 mm Spindle drive 4 kW Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4,000 kg Accessories / Special Features SCHÜTTE CNC ...
table length: 500 mm table width: 250 mm ampere: 50 A x-axis: 290 mm y-axis: 200 mm z-axis: 300 mm total power requirement: 6 kW weight of the machine ca.: 1100 kg dimensions of the machine ca.: m CNC-Controlled Die Sinker The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. grinding diameter: 320 mm grinding length: 500 mm workpiece length: 700 mm total power requirement: 10 kW weight of the machine ca.: 4 t dimensions of the machine ca.: m Height of centres 220 mm Distance between centres / clamping length 750 / 500 mm Table size 290 x 1,600 mm Intermediate table 110 x 1,200 mm X / Y / Z axes 500 / 320 / 320 mm Feed speeds, X, Y & Z axes 0.005 - 5 m/min Grinding head swivelling, vertical axis, manual 200 ° Grinding head tilting, manual +/- 90 ° Speed range of R axis, approx. 0 - 50 rpm Grinding spindle speeds, infinitely variable, approx. 2,000 - 12,000 rpm Workpiece holding fixture 50 ISO Indexing 1 - 999 ° Leads 0.5 - 10,000 mm Spindle drive 4 kW Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4,000 kg Accessories / Special Features SCHÜTTE CNC Continuous Path Control for 4 axes with SIEMENS/BOSCH components and SIEMENS ...
Surface Grinding Machine Manufacturer: Jung Type: JA 500 CNC-C Year of Make: 1995 Overhauled in: 2003 Grinding length: 500 mm Grinding width: 200 mm Max. workpiece height: 250 mm Table dimensions X/Y: 600 mm / 200 mm Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Speed: 4,200 rpm Machine weight: approx. 2,500 kg
GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x508 mm, Regulating Wheel Dimensions: Ø355xØ152,4x508 mm, Ø min/max to be rectified: 3 - 300 mm, Dimensions of the work wheel: Ø610xØ304.8x508 mm, Dimensions of the drive wheel: Ø355xØ152.4x508 mm, Weight: 17000 kg, Power: 100 kW
Mazak VTC-41 L X: 1660 - Y: 410 - Z: 510 mm CNC X-axis: 1660 mm Y-axis: 410 mm Z-axis: 510 mm Table dimensions: 2000 x 410 mm Max weight on the table: 800 kg Depth of throat (uprights-spindlecenter): 460 mm Admission in spindle (ISO): ISO 40 Power on the spindle: 11/7,5/5,5 kW Drilling-capacity: max dia 25 mm Tapping-capacity: max M24 Control : Mazatrol Number of axes: 3 axes Toolchanger: yes Number of rotations: 7000 rpm Length: 3900 mm Depth: 3050 mm Height: 2700 mm Weight: 6 ton
Chevalier X: 850 - Y: 510 - Z: 510 mm CNC X-axis: 850 mm Y-axis: 510 mm Z-axis: 510 mm Table dimensions: 1000 x 450 mm Admission in spindle (ISO): ISO 40 Power on the spindle: 7,5 kW Control : Siemens 810 Number of axes: 3 axes Toolchanger: yes Number of toolholders: 20 positions Number of rotations: 8000 rpm
Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional
Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional
turning diameter: 1220 mm turning length: 5000 mm control: FAGOR 8055 TC turning diameter over slide: 880 mm turning diameter over bed: 1220 mm tail stock: M80 tailstock quill diameter: 180 mm tailstock quill stroke: 260 mm spindle turning speed - stepless: 0 - 1000 U/min spindle motor: 40 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m complete retrofit in 2020 - CNC Control Fagor 8055 TC - Tool holder turret:SAUTER model 0.5.320.025, vertical axis - Chip Conveyor - 4-jaw chuck Ø1000 mm - 3-jaw chuck Ø500 mm - Steady Ø500 mm - Movable bezel Ø250 mm - Special bar for machining very long interiors - Coolant RETROFITTING IN 2020 • Grinding of carriage guides on the X and Z axes • Preloading of X and Z axis ball screw nuts • New Turcite placed on the X and Z axis carriages • General review and disassembly of the engine and head regula ...
max. wheel diameter: 620 mm gear width: 90 mm max. module: 12 min. module: - no. of teeth: 6 - 100 pivoting angle: 0 - 90 Grad spindle taper: metr. 100 milling head speed: 28 - 56 U/min connected load: 18 kVA Control: total power requirement: 14 kW weight of the machine ca.: 12 t 2020 Retrofit with new control/electrical system) - CNC control NTC (Fanuc) (German/English) - electric handwheel - new motors/ electrics - various change wheels - chip conveyor - coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 5-axis ESPE LAVA CNC 500 was manufactured in 2008, designed for advanced dental technology. It features a standard disc diameter of 98mm, operates within a temperature range of 18 â 25°C, and maintains a sound level of 65 dB (A). Ideal for businesses aiming to enhance automation and productivity in milling operations. Contact us for more information about this machine.
This 5-axis ESPE LAVA CNC 500 was manufactured in 2010, featuring a robust universal machining center design. It operates on a supply voltage of 200-240 V AC and supports a nominal output of 0.92-1.1 KW. The machine dimensions are 1090 mm in width, 1960 mm in height, and 840 mm in depth, weighing approximately 620 kg. If you are looking to get high-quality milling capabilities, consider the ESPE LAVA CNC 500 machine we have for sale. Contact us for more information.
CNC Deep Hole Drilling Machine Shinil (Korea) Year: 2009 Control: Fanuc Oi-TD Key Technical Specifications • Drilling diameter (solid): Ø 50 – 200 mm • Counter boring max: 500 mm • Trepanning max: 500 mm • Max drilling depth: 6000 mm (6 meters) Workpiece & Motion • Z-axis stroke (tool free): 6000 mm • Work spindle stroke (max): 4000 mm • Z-axis rapid feed: 5000 mm/min • Z-axis cutting feed: 0 – 1000 mm/min • Control axis: Z-axis CNC controlled Spindle & Speed Range • Headstock rotation: 5 – 30 rpm • Tool holder spindle speeds: • 50 – 500 rpm • 25 – 250 rpm • 16.6 – 166 rpm • 8.3 – 83.3 rpm Cooling & Drives • Coolant pump control: Inverter-driven • Motor control: NC controlled spindle & tool rotation Power & Installation • Total power: approx. 335 kW • Power supply: AC 440V / 60Hz ...
used
hogedrukkoeling via de spindel spanentransporteur X-axis: 1660 mm Y-axis: 510 mm Z-axis: 510 mm Table dimensions: 2000 x 510 mm Max weight on the table: 1000 kg Admission in spindle (ISO): BT-40 Power on the spindle: 18,5 kW Control : Mazatrol 640M Toolchanger: yes Number of toolholders: 30 positions Number of rotations: 12 000 rpm Weight: 8250 kg
used
Maximale afmetingen van het werkstuk: 800 x 1000 mm tabelindexering elke 0,001° afstand van palletcentrum tot spindelneus: 70 gt; 810 mm afstand van palletoppervlak tot spindelcentrum: 100 gt; 830 mm Hogedrukkoeling via de spindel (70 bar) Uitgerust met Palletech High Rise System = uitbreidbare palletopslag met 2 niveaus voor 12 pallets. spanentransporteur X-axes: 730 mm Y-axes: 730 mm Z-axes: 740 mm Table dimensions: 500 x 500 mm (2x) Max weight on the table: 700 kg Admission in spindle (ISO): BT40 Power on the spindle: 30 kW Toolstore: yes Tools: 160 positions Frequency : 18000 rpm Number of pallets : 12 pallets Length: 9000 mm Depth: 8000 mm Height: 2850 mm Weight: 12,4 ton
max. wheel diameter:210 mm total power requirement:60 kW weight of the machine ca.:8 t dimensions of the machine ca.:2,85 x 2,60 x 1,80 m grinding slide feed:700 mm grinding slide feeds:1-15.000 m/min max. workpiece weight:150 kg centre height:260 mm grinding wheel diameter:240 mm
grinding length:600 mm grinding width:250 mm workpiece height:380 mm :Sinumerik max. dia. of grinding wheel:300 mm weight:4000 kg total power requirement:12,5 kW grinding wheels:Ø 400 mm max. width of grinding wheel:100 mm grinding wheel hole diameter:127 mm turning speeds:470 - 12030 1/min x-axis:600 mm y-axis:300 mm z-axis:250 mm grinding range:450 x 200 mm distance spindle nose and table:500 mm table load:250 kg dimensions of the machine ca.:2600 x 2100 x 2400 mm switchgear cabinet:1300 x 800 x 2000 mm hydraulical unit::450 x 350 x 500 mm Documents:vorhanden
Reinforced steel scissors Round iron scissors Scissors Manufacturers Muhr and Bender Type 50N/22 and 50N/28 50N/22 intersects at 450N/mm2: Round: 22mm Square 22mm Flat: 35x10mm 50N/28 intersects at 450N/mm2: Round: 28mm Square 24mm Flat: 40x15mm Both machines new and ovp Special price
Decorative holding card TMCC
Data sheet of retrofit POS. GE 11.70 Gebhardt 5.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Belt length: 900 mm Length of main conveyor: 5,549 mm (incl. upper bow piece) Length upper bow piece: 613 mm Total width: 610 mm Belt width: 500 mm Belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 650 mm H 2 above 2,300 mm Difference in altitude: + 1,650 mm, trail/slope 19° or 34% Support: Please ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction year: 2007 condition: very good (used) Conveying length in mm: 6449 ...
Gebhardt Belt conveyor system 5549-610-500 with pre-flow belt 900-610-500 RA1005 The belt conveyor system from Gebhardt is from 2007 and is in a very good (used) condition. It has an engine of the brand SEW. The system can be used in up-and-down operation. Inclination angles are adjustable as desired, upper arc and supports can be adjusted. Columns are not included in the scope of delivery. These are optionally available. Consisting of: 1 x pre-flowstrip, 1 x main band, 1 x sheet piece Technical data: Manufacturer: Gebhardt Type: 300.10 Position: GE 12.20 Built: 2007 Condition: very good (used) Engine: fully functional Length main band: 5549 mm (incl. top bow) Nominal/outer width (NB): 610mm Belt width (GB): 500 mm Webbing: slightly structured Length pre-flow belt: 900 mm Length of sheet: 613 mm Webbing: smooth Heights OK Strap: H 1 bottom + 650 mm H 2 top 2,300 mm Height differenc ...
Data sheet of retrofit POS. GE 22.10 Gebhardt 7.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7.449 mm (incl. upper bow piece + straight piece) Upper bow piece length: 392 mm Upper straight piece length: 3,830 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 1700 mm H 2 above 2,800 mm Difference in altitude: + 1.100 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction ...
Data sheet of retrofit POS. GE 12.05 Gebhardt 7.7 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7,733 mm (incl. upper bow piece + straight piece) Upper bow piece length: 375 mm Upper straight piece length: 1,293 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 2,300 mm H 2 above 4,320 mm Difference in altitude: + 2,020 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction ...
90° roller curve left + 880 mm straight piece as combination Make: Dematic Rolling curve: 90° link running Width: 440 mm Nominal width (overall width incl. sidewalls): 500 mm Inner radius of the curve: 765 mm Straight piece: Length: 880 mm Width: 440 mm Total width: 500 mm Roles, bright zinc-plated Scale: 70 mm Gearmotor: Make Franz Bangert optional Guide on both sides 3 support Height role OK 800 +/-100 mm Features: Running direction: LEFT condition: very good (used) Nominal / inner radius in mm: 765 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES Engine type: Franz Bangert Getriebemotor scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung ...
Gebhardt roller curve conveyor 2 x 90° LINKS 610-500-300 with straight frame RA1210 The Gebhardt wheel curves with straight gear are from 2007 and are in a good (used) condition. It has a central engine of the SEW brand. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Gebhardt Type: 1070.113 Built: 2007 Condition: good (used) Engine: fully functional Angle: 2 x 90° with straight frame Outer width: 610 mm Clamping length: 500 mm Length straight line: 300 mm Rolls Type: G6/50 sliding bearing with conical plastic Molding Power rating: 30 kg/m Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2/1.15 Conveyor speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (if necessary please enquiries) Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoic ...
Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...
Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...
Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd
more tech. Details on request
Tischaufspannflaeche Max Tischbelastung 25 to . groove distance 180 mms table movement 1,000 mms table rotation B axis 360? Aufspannflaeche 1600 x 2,500 mms number of the grooves 9 table overtakes completely in 2012 anew SIEMENS impulses, new MOOR GROVE graduations
Important and outstanding design features of the RaptorX-SL with steel substructure / gantry design RaptorX-SL1200/S20 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special size (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! To such a way that you are able to process plate materials with the greatest stability of the Z-axis exactly as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or water jet cutting system, are available In the middle range of the machine (between the foottubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm height ( at 400mm long F ...
Important and outstanding design features of the RaptorX-SL with steel substructure in gantry design RaptorX-SL1200/S15 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. Special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm h ...
Important and outstanding design features of the RaptorX-SL with steel substructure /RaptorX-SL3200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the high-adjustable working area (read-through he under bridge variable : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special coarseness up to 17,500 mm (on one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm hei ...
Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...
Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...
Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...
Specifications / Technical Data S-720 CNC-Fraesmaschine With the High-Z CNC-Fraes.- and Engraving Machine you acquire an all-round talent in TUeV-certified Quality (EMV). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equipment of all high- ...
Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emerge ...
Important and outstanding design features of the RaptorX-SL with steel substructure / RaptorX-SL2200/S20 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (read-through shoe under bridge: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-plates. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm ...
Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL2200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce ...
Important and outstanding design features of the RaptorX-SL CNC Fraes machine / CNC-Fraese with steel substructure / RaptorX-SL2200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (through-shoehe under bridge : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special larges up to 17 500 mm ( on one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to ...
Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction metho ...
maximum number of results exceeded
please refine your search
