127,517 used machines on RESALE, but how to find them? Machine Search
Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of D153928 Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.
USED STERLING SIHI GMBH ZTNC 50200 AA 002 1B 2 CENTRIFUGAL PUMP
GALACTIC GAVA 500 CAPVD PVD sputtering machine was built in 2022 in Poland. This extremely technically advanced system is designed to coat, among others, cutting tools, moulds and punches with super-durable coatings with high resistance to abrasion and chemical agents. The CAPVD (Cathodic Arc Physical Vapour Deposition) method used, compared to standard PVD methods, allows highly dense and adherent coatings to be produced with good deposition rates and thicknesses (± 5 nm). In the process, atoms from a source (cathode) placed in the working chamber are vaporised using an electric arc. These atoms then transfer and deposit onto the surface of the workpieces, creating a thin coating. The GAVA 500 PVD sputtering machine is equipped with all the necessary components of the best technical specifications and meets the highest industry standards. Technical specifications of the GALACTIC ...
Didar Part Number 2600134944 NSN 12-163-2290 Original Part Number 5900980220 In-Pipe Water Pressure 3.5 – 7 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 12 Lt. Amount of Air Outside the Pipe 38 Lt.
Laboratory Centrifuge from Eppendorf Operational
Make: ISHIKA WAJIMA HARIMA BROWN BOVERI Type: VTR 564-11 Serial Number: XI 97711 & XI 97712 RPM: 13800 T MAX: 620°deg.C N.MAX: 230 1/s Specification: V 01113, R 011, H 01112 W02108, E 01113 L36100, T 04100
From the roll to the bag! Manufacture bags according to desired format and fill and seal with the product. Description - Optimal price-performance ratio - Easy operation and cleaning - Low maintenance - Stainless steel version (1.4301) with safety Plexiglas - Control is carried out by a PLC, color touch display with intuitive operating software - Fast, tool-free bag format change - One format included Specifications - Intermittent heat sealing for hot sealable films - Film thickness: 0.04mm to 0.15mm - Film width: 180-520mm - Bag dimensions (LxW): 60-350mm x 70-250mm - Cycle rate: 15-50 bags /min. (depending on VE) - Electrical power: 3.5 KW / 220V / 50(60) Hz - Compressed air consumption: 700 l/min at 6 bar - Dimensions (LxWxH): 1540mm x 1160mm x 1600mm - Weight: 450kg
Specifications: - Grinding wheel diameter approx. 500 mm - Grinding wheel width approx. 50 mm - Grinding wheel bore approx. 127 mm - Disc speed 950 rpm - Drive 400 V / 3.3 kW - Working height approx. 800 mm - Working depth / protective depth adjustable - Connections for suction pipe 100 mm - Space requirement approx. W 1250 x H 1150 x D 650 mm - Weight approx. 350 kg
Cutter Kilia 5000 Express 500 liters vacuum cooking fast cutter, knife shaft with 6 fixed programmed speeds, 4 forward and 2 backward, infinitely variable bowl drive, electronic thermometer, electronic tour counter, hydraulic noise protection cover, hydraulic knife cover, hydraulic ejector, knife head 8-piece, separate control cabinet made of stainless steel
Cole Parmer Vacuum Furnace Cole Parmer's vacuum furnaces are designed for drying under carefully controlled conditions – normal atmosphere, vacuum to 30" Hg or inert gas atmosphere. The oven enables drying, vacuum embedding, electroplating and processing of electronic components. Non-corrosive, non-flammable gases such as nitrogen and carbon dioxide can be used in the furnace. All controls and connections (except the power supply) are located on the front in a vertical panel. Manufacturer: Cole Parmer Model: 5053-12 Power: 600 W Voltage: 240 V Dimensions: 510 x 420 x 1200 mm More items - new and used - can be found in our shop! International shipping costs on request!
new rear light, incorrectly ordered, from stock
The used cleaning machines are all checked for functionality, cleaned and, if necessary, overhauled. Technical details: Manufacturer: Kärcher Model: BR 530 BAT, battery-powered Year of construction: 1998-2006! subject to availability Condition: very good Nominal voltage 24 V Battery capacity 75 Ah (5h) Power consumption 1200 W (1560) Suction motor power 500 W Brush motor power 600 W Suction power, air volume 30 litres/second Suction power, vacuum 140 mbar Cleaning brush working width mm 460 diameter mm 96 Brush speed 1500 rpm Theoretical area performance 1840 m²/h Volume fresh/dirty water tank 40/40 litres Total weight 150 kg Sound pressure level (EN 60704-1) 70 dB Total vibration (ISO 5349) 0.4 m/s² Built in 1998-2006! subject to availability Additional support wheels on the suction beam and at the front. We would like to point out that with regard to the ...
An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
The UCC 548 is a productive and flexible high-speed model. This machine is characterized by its ability to produce a wide variety of fabric weights and designs – perfect for smaller, ever-changing markets. Thanks to its outstanding efficiency and quality, the Terrot UCC 548 has gained international recognition and is established on the market worldwide. Features: - Made in Germany: Maximum efficiency and precision for reliable production. - Flexible application options: With 1.6 feed points per inch and a speed factor of 800, production is extremely efficient and adaptable. - High-quality inserts: Integrated guides enable safe processing even with long thread runs. - Versatile technology: The machine is available with a choice of 2-way or 3-way technology in the cylinder control rail, allowing for a wide range of applications. - Great design flexibility: Two needle marks i ...
Dear Ladies and Gentlemen, We hereby offer the following original and newly packaged AXIMAX Blue Fan. aximax axial fan NW500 Type: AXK 500-6BD2-20°-3 with attached three-phase motor IE3 3 kW; 3000 min-1; 400V 50Hz with PTC for FU operation with protective grille between impeller + motor New and unused! Hours: 0 Details can be found in the pictures and PDF in the advertisement. Prior sale/errors/changes at any time reserved, EXW Beesten Price VHB! If you have any questions, please feel free to contact Sascha Neuwirth at any time Service for all aspects of the gas engine EPS BHKW GmbH Speller Straße 12 49832 Beesten Phone: +49 5905 945 82-0 Fax: +49 5905 945 82-11 Mail: info@eps-bhkw.de
Control cabinet for PAAL accounts 200, 275, 325, 425, 500, 600, 700 after renovation An original control cabinet, the one from the PAAL Konti 425 B/K, built in 1992, with the cross binding. It is based on SIEMENS S5 controller. It is also suitable for the other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power, also for the variant with the cross binding. A complete control cabinet, functional, after renovation We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
The ASCO CB 5000 conveyor belt is a reliable solution for transporting bulk materials like soil, gravel, sand, or compost over medium distances. With its 5-meter length, this conveyor belt is designed to handle daily use on construction sites, in recycling centers, or at composting facilities. Its sturdy construction and modular system make it easy to expand and adapt to changing project requirements, ensuring it stays efficient for years to come. Adjustable conveyor angle and belt tension allow the ASCO CB 5000 to handle different materials and working conditions with ease. The operating hours counter helps plan maintenance, keeping downtime to a minimum. Quick assembly and disassembly make it a practical choice for sites that need frequent relocation. Whether used with screening plants or on its own, the ASCO CB 5000 delivers consistent, safe, and efficient material flow. Its robust ...
Cooking length 4,000 mm Track width 600 mm completely stainless steel steam-heated with electric lifting device Temperature distribution in 2 zones Dimensions (L x W x H) : ± 5,000 x 1,550 x 2,200 mm infinitely variable speed
Suction fan Slow runners D= 350mm Air capacity 6250m³/h
Motor power 18,5kW Air capacity approx. 12,500m³/h Pressing 3500PA Good condition
Make: RIJVA Model: 502/1 S/N: 405 Cap: 12 tons
TEKO composite system with 4 pcs. FRASCOLD compressor type S20.56Y With control box
Surface grinding machine Make: LECHLER Model: 500 x 150
Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 18,510 mm Number of fields / row of shelves: 05 pcs á 3,600 mm Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 12 pcs. Pallet spaces per row of racks: 60 pcs. Total pallet spaces: 60 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 500 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: Ral 5015 sky blue Stand Type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 1,750 mm high 1,100 mm d ...
Arburg 520C-1300-350 (163) with bimetal plasticizing unit General information Item number: 163 Availability: In stock Year of construction: 1999 Brand: Arburg Specifications Spray weight: 194 g Clamping force: 1,300 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 520x520 mm Clamping plate size: 715x715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 95616 h Weight: 6380 kg Dimensions: 5.1x1.9 m Funnel: No Core train: Yes Euromap: Yes
Cutting saw for cutting waste material. Suitable for processing waste after an angle circular saw. The configuration of the machine and its parameters is by mutual agreement. Technical parameters: Power of the main motors: 2 x 11 kW Power of the feed motor: 0.75 kW Minimum height of the starting material: 15 mm Maximum material length: optional Maximum height of the starting material: optional
Year of manufacture 2019, top condition, only approx. 300 hours Machine housing: solid stainless 2 rotation directions Emptying by hydraulic tilting of the mixing trough Membrane keyboard with plain text display in German Automatic mixing time preselection Control cabinet built-in, main switch Microprocessor Control (PLC) Mixing speed speed: infinitely variable Mixing tank: 500 litres Motor power 7.5 KW / voltage 400V / 50Hz Incl. MA 20 automatic mixing: for up to 20 programs (forward/backward/pause/total time and mixing speed speed) Incl. Z-mixing arms instead of paddle shafts Incl. protective grille: welded construction made of stainless steel, hydraulically operated Incl. 2 operating instructions with machine With mast feeding system BA24 Hydr., stainless, for standard wagons
Fast and efficient machine. The machine is a perfect solution especially for hardwood processors up to a maximum height of about 35 mm, who want to achieve maximum material yield and high work efficiency. Technical parameters: Power of the main motor: 2 x 3 kW or 2 x 4 kW Shaft extension possible: 120 mm Feed belt width: 400 mm Power of the feed motor: 0.55 kW Tool diameter: 300 mm Maximum material height : 35 mm ( change on request ) Minimum material length: on request Small compact cutting sawing machine. The machine is suitable for cutting material with low energy consumption. Individual parameters can be changed on request. KuSING has been manufacturing woodworking machines since 1991.
Machine for the processing of large-area composite panel materials With this machine you are able to process portrait panel semi-finished products that are otherwise difficult to process We offer you a technology that has already proven itself in practice and works. With this technique you can process semi-finished products up to a maximum height of 220 mm precisely and accurately The technical parameters are queried and measured as required.
Engel Victory 500/120 Tech (145) without funnel General information Item number: 145 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 231 g Clamping force: 1,200 kN Screw diameter: 40 mm Spray pressure: 1300(2020) bar Spar spacing: Tie barless Clamping plate size: 740 x 680 mm Control: CC200 Language: German Power: 41 kW Operating hours: 96830 h Weight: 7400 kg Dimensions: 5 x 1.7 m Funnel: No Core train: Yes Euromap: Yes
Gear hobbing machine 53A50H, STANKO, with change gears
Gear slotting 5140, Russia production, with change gears
Ryobi 524HE in very good condition, 62 mil, in germany Production, Wash units, control panel
Cooling capacity: 787 kW Year of manufacture: 2005 Refrigerant circuit: 2 pcs. Type of refrigerant: R134A Compressors: 2 pcs. York (screw) Number of fans: 10 pcs. Dimensions: 6.50 x 2.26 x 2.50+0.06 m Weight: 7056 kg Condition: excellent Product quantity: 1 pc.
MOSCOW 582 thread grinding machine was manufactured in the USSR. Technical data of MOSCOW 582 thread grinding machine - grinding diameter: 250 mm - grinding length: 500 mm - tooling (divider, fang, changewheels) - dimensions: 260 x 220 cm
Moog Servo Valve Unit D665-5703 & D661-5623C High Performance Valve Module For sale is a fully functional, industrially used high-performance servo valve unit from MOOG, consisting of two perfectly matched valves Also available as a single component ! Moog D661-5623C – High-Response Valve Technical Property Value Model name: D661-5623C Type code G18H0A0NSA0HP Valve type 4-way, 2-stage with bushing slider Nominal volume flow 120–200 l/min (depending on version) Operating pressure P, A, B max. 350 bar Return pressure T (internal) 210 bar Return pressure T (external) 280 bar Control pressure 25–350 bar Coil stroke ±0.13 mm Control surface (AK) 1.35 cm² Actuation time (0–100 %) approx. 14 ms Hysteresis < 0.6% Zero displacement < 1% Supply voltage ±15 V DC Input signal ±10 V IP65 protection Mass approx. 5.7 kg Connection diagram ISO 4401-05-05-0-94 ...
Stock number: U2386-1 Used rotary film evaporator by Corning (UK). Evaporator has 50 l rotating evaporating flask, driven via gearbox with adjustable rotation and el motor 0.37 kW, 1425 rpm, 380 V, 50 hz. Ex design (EExdIIBT4). Heating of flask by coil inside the bath tank - can be used on steam, oil or water. Height of bath adjustable hydraulicaly by manually operated pump. Machine is equipped with two receiving tanks, condensator and all connections. All glass is made by QVF.
Pipe furnace with 5m long furnace section for heat treatments under inert gas atmosphere. Tmax: 1300°C On the Nabertherm website you can see a product video of this unique stove. It was originally operated vertically as a downpipe furnace. A horizon-wide use is of course also possible. The structure is clear: It is a nearly 6m long truss-like frame, on which six oven case elements are attached. These are hinged and inside runs the almost 6m long pipe made of Kanthal APM. Each furnace element has two thermocouples type S (platinum/rhodium). Kanthal APM is very resistant to oxidizing atmospheres.
core engine Centaur 50. The turbine and associated gearbox have been completely base overhauled after last operating and are a ready-to-install for a zero-hour turbine exchange. After the overhaul, there was no active operation / no installation. The turbine and gear box Sale Solar Centaur 50 Base overhauled core engine: Manufacturer Solar Turbines - Type CENTAUR 50 SoLoNox - Year of construction 2022 Zero-hour core turbine and gearbox - Electrical output 4,040 kWel - Speed 14,944 rpm 50Hz - Fuel Natural gas H - Design temperature 15° C - Turbine inlet temperature 665 °C (1.229 °F) - Gearbox with zero operating hours - Turbine control Solar TTS4
5.50 Meters AR Racking Pallet Rack AR Racking pallet racking with a total length of 5500 mm, consisting of a base field and an attachment field (2700 mm each). Each field has three levels (including floor space) with four trusses (2700 mm). 3 Euro pallets can be stored next to each other and 3 pallets (incl. floor space) on top of each other per field One field offers space for 9 Euro pallets Manufacturer: AR Racking Type: ARPA-S Total length: approx. 5500 mm Shelf height: 3000 mm Shelf depth: 1100 mm Clear field width: 2700 mm Pitch: 50 mm Number of storage levels: 3 (incl. floor storage space) Number of fields: 2 Shelf load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 18 Year of manufacture: 2023 Stand The frames consist of two Omega profiles with their corresponding connectors, post feet and fastening materials The horizontal and diagonal struts are ...
Winterhalter GS 502 Basket Push-Through Machine The Winterhalter GS 502 rack pass-through machine offers you all the necessary basic features that a rack pass-through dishwasher must have. You benefit from a consistent hygiene concept with a deep-drawn tank, surface radiator and screening system. Thanks to the concentrated cleaning power, Winterhalter guarantees hygienically clean washing results, even with heavy soiling. Specifications: Theoretical power: 60 baskets per hour Dimensions (width x depth x height): 635 x 749 x 1469 (canopy open 1932) mm Entry height: 420 ± 5 mm Working height: 850 mm Basket dimensions: 500 x 500 mm Fuel tank capacity: 42 l Rinsing water requirement per wash cycle: 2.4 l Tank temperature: 60°C Boiler temperature: 85°C Required water flow pressure: 1 bar Total connected load with hot water connection > 40°C: 9.5 kW Total connected lo ...
Used labeling machine P.E. LABELLERS model Universal M / S 6T / 540 / 2S-2E Power required: 3kW Required pressure (demand): 5 bar (15 l / min) Capacity: 80 pcs / min (jars - 1 format) The device allows labels to be applied to the front and back of the package. The device is equipped with one type of format. When using other formats, it is possible to cover jars of 0.3-0.9 liters. The device has a buffer sensor for jars that are fed into the labeller. A cold label gluing system is used.
PART NUMBER 7794 SPECIFICATIONS - inlet width 530mm - inlet height 200mm - shaft diameter 370mm - shaft width 510mm - knife length 510mm - number of knives 2pcs - autorever – adjustable - sieve dimensions 50x50mm - Bottom geared pulling shaft 1.5kW - Toothed pulling shaft from above 1.5kW - main motor power 30kW - vibroline loading table / vibroline length 3900mm - vibroline width 500mm 1.5kW - Receiving conveyor belt length 5000mm - tape width 380mm - hopper with chute for sprues 2500x3020x2200mm - Platform 4650x750x1770mm - Dimensions of the machine with conveyor belt and vibroline length/width/height 8900x1200x2550mm - weight about 6000kg ADVANTAGES – adjustable autorever – with vibroline 3900mm – with conveyor belt 5000mm – German production – very good condition – used chipper Net price: 98900 PLN Net price: 23548 EUR depending on the pr ...
workpiece length ... 3050mm max. šWorkpiece width ... 1525mm sheet thickness ... 19mm Laser power... 2500W Axis Z ... 300mm Axis A ... 360° Axis B ... 1.5M Axis C ... 360° Control Mazatrol L x W x H ... 9800x5000x2300mm Machine weight ... 14500kg The machine is in good condition, possible to test under power.
Carestream (Kodak) Storage Tray System (CR System) DirectView CR 500 (untested) First processing station consisting of computer/monitor/keyboard/mouse Diagnostic workstation 4 Kodak CR cassettes • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
With new 1.500mm. wide belt and new control-unit. Will be overhauled, sandblasted and painted.
Agilent 5975C XL inert MSD with Agilent GC 6890 N GC Agilent 6890 N, Injector Split/Splitless, MSD 5975 C inert XL with EI,Turbopump,Fastscan Edwards Backing Vacuum Pump 1.5 Agilent Productivity Chemstation E02.02 on PC/Win 10 complete with all cables, Option: Agilent Liquid Sampler, Sampler/ CTC or Gerstel MPS 2) The system is ready for installation and ready for operation current service Installation at extra charge on request
maximum number of results exceeded
please refine your search
