5 axes machining used for sale

BIG suitable for Volvo BM / Liebherr 514, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 61.5 mm, Bottom bolt: Ø 51 mm, Bolt center-to-center distance: 617 mm, Further recordings also available!

BIG suitable for Volvo BM / Liebherr 514, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 61.5 mm, Bottom bolt: Ø 51 mm, Bolt center-to-center distance: 617 mm, Further recordings also available!

BIG volume bucket 200cm with Liebherr 509 attachment, - Construction year: 2025, - working width: 200 cm, - own weight: 493kg, - capacity: 1.72 m3

NEW, Width: 200 cm, Dead weight: 493 kg, Capacity: 1.75 m³, suitable for JCB 520-50 mount

50,000 litre underground tank - brand new - according to DIN-EN 12285-1, single-walled, raw inside, professional insulation on the outside. Dimensions: D = 2.50 m - L = approx. 10.70 m The tank has a DN 600 manhole with dome cover, screws and seal. Containers from the factory, freely charged. On request, the tank can be completely equipped with a fire water suction connection, the tank then meets the requirements of DIN 14230 - underground fire water tanks: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction pipe DN125 made of stainless steel - V2A, with Storz A fixed coupling and Storz A blind coupling, - 1 pcs DN100 vent pipe with stainless steel hood - V2A, - 1 piece anti-vortex plate mounted on suction line, - 1 sign "Extinguishing water extraction point", - 1 pc. soun ...

Clamping Force: 300 ton // Shot Weight (Max): 476 g

Clamping Force: 350 ton // Shot Weight (Max): 694 g

Clamping Force: 420 ton // Shot Weight (Max): 1555 g

Key data: 1451 KW, 1500 1/min

Complete CHP packge, contenarized unit includes: - Gas engine, generator, genset controller, gas train - lube oil module - ventilation - exhaust gas heat exchanger - GCB, - 0,4/20KV transformer -auxiliaries contorler

Diagonal Fan, 230V, D350mm, 5000m³/h, EDR 36-0080.0658, MAICO, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The parts were purchased from a company's spare parts warehouse, were in their original packaging, have never been used and are completely new. Diagonal fan, 230V, 960 watt, D350mm, 5000m³/h, Type EDR 36-0080.0658, MAICO, new Overall length 397mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and cour ...

Vertices: • Transformer from a well-known German manufacturer • Currently stored directly at the manufacturer – no waiting for production • Fast and uncomplicated delivery • Ideal for time-critical applications or ongoing projects • Manufacturer's warranty is 5 years (starting 01.06.2025)

UNDERWATER PELLETIZER, suitable for a variety of materials, among which PE PP PS ABS TPE, etc., up to 2.500 kg/h, Total installed power 67,14 kW, The supply includes:, Connection from your screen changer to the diverter valve, made of C45 steel heated by mica electric haters., Diverter valve heated with electric heaters This allows the flow of product to be diverted to the drain to bring the extruder up to speed, it consists of a C45 steel body with a specially perforated plate that diverts the flow to the outlet or die. This plate slides via a position-controlled hydraulic cylinder, operated by a hydraulic power unit complete with high-pressure hoses. Pressure and product temperature control probes are also included., Cutting unit consisting of: electrically heated die adapter/diverter valve; AISI304 granulation chamber; die with hard metal inserts, heated by electrical heaters; auger h ...

- Year of construction unbekannt - Min. Teilelänge 320 mm - Max. part height 90-95 mm - Anzahl der Etagen 7 Stk. - Abstand der Etagen 100 mm - Einlegetiefe der Etagen 650 mm - Aufrechte Ständer 300-450-450-300mm, 5 Stk. - Gesamthöhe 1740 mm - Gesamtbreite 1.540 mm

- Producer Barberan - Length 2.500 mm - Working width 1.300 mm - Working height 890 + - 30 mm - FU-Regelung für Feed speed ~ 5 - 25 m/min - Voltage / HZ 400 / 50 - Motor power 0,55 kW - Colour 7035

- Producer Barberan - Length 2.000 mm - Working width 1.300 mm - Working height 890 + - 30 mm - FU-Regelung für Feed speed ~ 5 - 25 m/min - Voltage / HZ 400 / 50 - Motor power 0,55 kW - Colour 7035

Key data: 3200 mm, 972 , 65

Screw diameter: 65 mm Injection weight in polystyrene: 972 g Clamping force: 3200 kN Screw diameter: 65 mm Stroke volume: 1068 cm³ Injection weight in polystyrene: 972 g/hp Injection pressure: 2,120 bar Clamping force: 320 t Lights Tie bar spacing H x V: 680 x 680 mm Tool installation height - min.: 250 mm Opening distance: 640 mm Microprocessor control: ABF0100-KEBA2985, 15" Screen text: german Operating instructions: german FHK interface for robots: Euromap 67 Core pull: -- Without material hopper / Without water battery: -/- Pump drive power: 45 kW Total connected load: 78 kW Total weight: 14,000 kg Total size: 8.0 x 1.9 x 2.4 m Payment terms: 100 % before taking over the machine, net only

Column-mounted jib crane, Vetter, 1,500kg, 6m boom, 6m high – unused - : Price from location: only 13.950.-€ (net)! Manufacturer: Vetter Type Master M Year of Make: 2022 Load capacity P: 1500kg M15-6.0 Column-mounted jib crane designed in accordance with the EC Machinery Directive, EN 13001 and VDE regulations, for outdoor use 4 Beaufort (20 – 28 km/h; moderate breeze). Identification number: 50010400 EN 13001 HC2 S3 HD2 Swivel range SB: 360° ∞ Max. permissible Hoist weight Gk 180kg Max. permissible Hoist speed VH 16m/min Projection A 6000mm Bottom edge boom UK 6000mm Overall height B 6470mm Bolt circle diameter DL 630mm Flange Outer Diameter DF 710mm Beam flange width F 180mm Approach dimension Aa 250mm Approach dimension Ai 915mm Pressure Column Length B1 1540mm max. vertical force Vk max. 32kN max. moment Mk max. 11575kNcm Weight 1756kg Operating ...

USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, capacity: 5.000 kg ca, conditions: used

SEW Eurodrive Type SA67 DT90L-4 ZFISITI 3 chamfer 400 volts 1.5 kW 26 RPM Shaft 40 mm L 52.00cm W 25.00cm H 25.00cm

USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 14.000 lt.ca, inspection hatch on barrel, loading hopper, control panel, conditions: used

200 sectional doors 5100 x 3100 mm Manufacturer: various Type: Sectional roller shutter Quantity: approx. 200 pieces Width: 5100 mm Clear height: 3500 mm Year of Make: 2002 Drive: no electric drive Design: partly with integrated door, partly without door Location: Paderborn

Manufacturer: Siemens Model: SGT 500 Year: 2007 Condition: New Wattage: 18,47 MW Hours: Zero Frequency: 50/60 Hz Fuel Type: Dual – Gas & Liquid New turbines from a canceled project (2007). covered by an 18-month Siemens warranty from the date of purchase.

Spur gear pulley, spur gear chain hoist, hand chain hoist, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist, hand trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley, under-flange trolley -Load capacity: 5000 kg -Hub travel: 4.0 m -Dimensions: 500/400/H800 mm -Weight: 165 kg

New 21.500 litre tank,, stainless acid proof steel AISI 316,, closed top, standing on 4 legs., Conical top 15°., Conical bottom 20°., Tank cover in the top Ø 500 mm., 3 pc. connection pieces, All welding on the inside are grinded grain 60., All welding on the outside are sandblasted., Tank dimension Ø 2500 mm x shroud 4180 mm., The tank is made in stained plate type B2., Density: 1.0., Working temperature: 0-+50°C., Working pressure: None, Scope of application: A, Litre: 21.500, Material: Stainless acid proof steel AISI 316

Condition NEW Brand Siemens Type CAF38 AK90LP4 Voltage Volt 1 chamfer 230 volt Power KW 1500 watt 1,5 KW 111 Nm RPM 95 RPM speed Shaft size mm 25 mm Version Version 32 kilo Units in stock 10 Length 50.00cm Width 25.00cm Height 18.00cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Geared motor FARMER Type BF50-04/DHE11LA4 Volt 3 chamfer 400 volt 4 KW 56 RPM Hole 50 mm IE2 L 60.00cm W 30.00cm H 50.00cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Farmer Type BG60-11/D11LA4 3 chamfer 400 volts 5.5 KW 58 RPM Shaft 50 mm L 75cm W 35cm H 35cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

LENZE MDEMA1M071-42 3 chamfer 400 volts 0.55 KW 7.8 RPM Hole 40 mm L 45cm W 35cm H 20cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Scissor lift table trolley, scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table -Load capacity: 500 kg -Platform: 1260 x 915 mm -Dimension retracted: 500 mm -Dimension extended: 1115 mm -Max. Stroke: 615mm -Quantity: 1 piece available -Transport dimensions: 1420/915/H870 mm -Town weight: 274 kg

Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -with electric driving unit via: frequency converter -Load capacity: 500 kg -Platform: 1500 x 800 mm -Dimension retracted: 310 mm -Dimension extended: 1000 mm -Max. Stroke: 690mm -Transport dimensions: 1500/800/H310 mm -Own weight: 234 kg

Gear motor, electric motor -Manufacturer gearbox Motovario type: NMRV040 -Manufacturer engine Seipee type: ZKF71C2.4 -Speed: 282/566 rpm -Power: 0.37/0.55 kW -Construction: B14 angle -Diameter hollow shaft: Ø 18 mm -Protection class: IP 54 -Brake -Dimensions: 430/160/H185 mm -Weight: 14.3 kg

Condition Used Brand Siemens Type ZR88-LA132SP4EW Voltage Volt 3 fase 400 volt Force KW 5,5 KW - 137 Nm Rotational speed RPM 384 RPM Shaft size mm 60 mm Flens pasrand 250 mm Version Eigen gewicht 170 kilo Length 110.00cm Width 35.00cm Height 35.00cm Related Products All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump -Manufacturer: FAG, hydraulic pump, hand pump -Type: ZPH 10/18 -Pressure range: max. 500 bar -Quantity: 1x hand pump available -Price: per piece -Dimensions: 660/170/H200 mm -Weight: 6.8 kg/pc.

Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Meuser, lead screw and feed screw lathe type M3A -Turning length: 1400 mm -Turning diameter over bed: 550 mm -Turning diameter without bed: 800 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools (see photos) -Tailstock mount: MK5 -Dimensions: 2770/1160/H1310 mm

Lifting platform, car lifting platform, lifting device, lifting lift, pit jack, axle free jack, truck lifting device, axle jack -Manufacturer: MWH Märkisches Werk Halver, truck lifting device pit jack -Type: Atlas LT -Load capacity: 2x 5000 kg -Lifting height: 1600 mm -Operating pressure: 60 bar -Accessories: included, see photos -Transport dimensions: 1000/940/H1400 mm -Total weight: 820 kg

Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Hexagon head screws: M20, DIN 931 -Weight: 514 kg -Sizes/number: M20 x 45 to M20 x 100, see photo parts list -Quality: 8.8 black or galvanized -Manufacturer: various -Price: complete -Total weight: 534 kg M20 x 40 mm, galvanized, 4 packs of 25 pieces = 100 pieces M20 x 50 mm, galvanized, 12 packs of 25 pieces = 300 pieces M20 x 60 mm, galvanized, 20 packs of 25 pieces = 500 pieces M20 x 65 mm, galvanized, 20 packs of 25 pieces = 500 pieces M20 x 100 mm, galvanized, 19 packs of 25 pieces = 475 pieces M20 x 45 mm, black, 1 pack of 25 pieces = 25 pieces M20 x 50 mm, black, 8 packs of 25 pieces = 200 pieces M20 x 90 mm, black, 5 packs of 25 pieces = 125 pieces

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, axial fan axial fan -Type: HE823412 FTXR 184259/56K -Power: 0.473/0.210 kW / 1350/1030 rpm -Fan: Ø 500 mm -Dimensions: Ø 660 / 240 mm -Weight: 11 kg

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Forbo Siegling, conveyor belt type E 12/2 EO/E3 MT-TT TRANSPARENT -Width: 500mm -Length: 11900 mm -Thickness: mm -Quantity: 1 piece available -Transport dimensions: 500/270/H230 mm -Weight: 11.3kg

Hydraulic filter, filter element, oil filter, filter cartridge, hydraulic oil filter, fuel filter, screw-on filter -Filter elements: hydraulic oil filter, fuel filter 540 pieces -Type: Different types from different manufacturers -Price/tax: complete -Transport dimensions: 1200/800/H800 mm -Total weight: 295 kg

Tool holder, milling holder, milling tool -Number: 515x SK50 holders with tool holder from KOMET GEWEFA and others -Standard mount: ISO 7388-1 SK50 -Standard pull studs: ISO 7388-3 -various designs -Drill chuck: face chuck, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -Delivery complete as shown in the pictures -Dimensions: 10x Euro pallets -Weight: 2464 kg

Radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, , , ventilation fan, blower -Fan: centrifugal fan exhaust fan -Type: unfortunately without type designation -Voltage: 380V/3ph. / separate windings -Speed: 550 / 750 rpm -Inlet: Ø 220 mm -Air duct connection: 190 x 145 mm -Dimensions: 410/380/H190 mm -Weight: 10 kg

Flange connection, V-flange, pipe coupling, welding reduction, reduction, clapper base, pipe bend, welding bend, pipe angle -Pipe elbow: welding elbow 90° 45° 0° 590 pieces -Type: 52 different versions, see photos/parts list -Price/tax: complete -Stock: other sizes/types also available, please inquire -Transport dimensions: 1200/800/H400 mm -Weight: 322 kg

drawer rail, telescopic rail, drawer pull-out, drawer runners, Telescopic rails, pull-out rails, side rails, front pull-out, stainless steel bar handle -Manufacturer: Grass, NP 2-side rectangular railing set -Type: P1054425010FH325 -Item no.: F102045860 -Length 594 mm / hole spacing 544 mm -Quantity: 50x handle available -Price: per piece / minimum order 4 pieces -Dimension: 594/33/H10 mm -Weight: 0.4kg/set

Pneumatic chain hoist, crane, indoor crane, assembly crane, air-operated chain hoist, compressed air chain hoist, compressed air chain hoist, pneumatic chain hoist -Manufacturer: BroomWade, pneumatic chain hoist type MLHI10A -Load capacity: 500 kg -Chain length: 3100 mm -Dimensions: see photos -Transport dimensions: 260/230/H300 mm -Weight: 18 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3115-2LA29 -Power: 50 Hz 5.0 kW 2910 rpm / 100 Hz 8.0 kW 5910 rpm -Voltage: 220/380 V -Mounting shaft: Ø 35 x 80 mm -Dimensions: 545/280/H225 mm -Weight: 60 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3116-2AA29 -Power: 50 Hz 7.5 kW 2920 rpm / 100 Hz 11.5 kW 5910 rpm -Voltage: 220/380 V -Mounting shaft: Ø 35 x 80 mm -Dimensions: 630/280/H195 mm -Weight: 70 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3115-2AA99 Z -Power: 50 Hz 5.5 kW 2925 rpm / 100 Hz 9.5 kW 5910 rpm -Voltage: 220/380 V -Mounting shaft: Ø 35 x 75 mm -Dimensions: 550/280/H235 mm -Weight: 60 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3107-2AA29 -Power: 50 Hz 3.5 kW 2880 rpm / 100 Hz 5.5 kW 5860 rpm -Voltage: 220/380 V -Mounting shaft: Ø 35 x 75 mm -Dimensions: 630/220/H280 mm -Weight: 50 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3108-2AA29 -Power: 50 Hz 3.5 kW 2880 rpm / 100 Hz 5.5 kW 5880 rpm -Voltage: 220/380 V -Mounting shaft: Ø 35 x 75 mm -Quick clamping system: Leuco with saw blade Ø 196 x 3.6 mm -Dimensions: 665/233/H235 mm -Weight: 48 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Siemens, milling motor electric motor type 1PC3084-2AA20 Z -Power: 50 Hz 1.25 kW 2880 rpm / 100 Hz 2.0 kW 5885 rpm -Voltage: 220/380 V -Mounting shaft: Ø 30 mm -Quick clamping system: Leuco with saw blade Ø 200 x 3.2 mm -Dimensions: 390/300/H220 mm -Weight: 36 kg