5 axes machining used for sale

Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm -Dimension 880/1390/H2060 mm -Weight 640 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S7 electronic module -Type: 6ES7 132-5SBOO-OABO -Number: 1x module available -Price per piece -Dimensions: 80/30/H80 mm -Weight: 0.1 kg/pc.

A rotary indexing filling machine Hamba for piston-based dosing of liquid and viscous products is available. Cup diameter: 75mm, max. height: 80mm, filling volume range: 50ml-250ml, filling capacity: 4000/h, machine dimensions X/Y/Z: approx. 2200mm/2300mm/2000mm, weight: approx. 1500kg. An on-site inspection is possible.

Servo motor, geared motor, electric motor, three-phase motor -Motor manufacturer: Siemens Type 1FK7042-5AF71-1FAO -Voltage: 267 V -Torque: 3.0 / 2.3 Nm -Speed: 9000/3000 rpm -Manufacturer of gearbox: Laipple Keb type NMS30 -Translation:: 1:40 -Hollow shaft: Ø 14 x 65 mm -Quantity: 1x geared motor available Price: per piece -Dimensions: 345/95/H130 mm -Weight: 7.1 kg

Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor -Manufacturer: Transnorm, belt conveyor type TS 1100 -Speed: 20- 91 m/min frequency controlled -Drive: SEW-Eurodrive 0.055/0.55 kW, see photo nameplate -Voltage: 380-500V -Brake: 5 Nm -Belt width: 500 mm -Conveyor length: 1580 mm -Transport dimension: 1600/690/H360 mm -Weight: 114kg

Dimensions: - Width: 1750 mm - Depth: 1500 mm - Height: 2400 mm (without base) Equipment : - Rectangular manhole 320 x 420 mm - Remaining drain NW40, Fredrich - Clarification drain NW40, Fredrich - Sampling - Stand display - Upper door 320 x 420 mm - Connection for ventilation

Surface grinding machine, grinding machine, surface grinding machine-horizontal, surface grinding machine -Manufacturer: Finke, horizontal surface grinding machine with magnetic plate -Magnetic plate: 550 x 200 mm -Traverse paths: x 500 mm / y 260 mm / z 260 mm -Drive: 1.5 kW -Grinding wheel: Ø max. 200 mm -Dust extraction device -Transport dimensions: 1950/1300/H1590 mm -Total weight: 1108 kg

Fan head, chamber fan, Dorade fan, mushroom fan, ship fan, deck fan, ventilation, mushroom head hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, louvered damper, backflow preventer, lamellar fan, mushroom head hood -Manufacturer: Witt & Sohn, Mushroom head hood type PK wd 500 x-schw. VZ -Hood opening: mechanically lockable, handwheel -Bolt circle Ø 550 x 12 mm -Quantity: 2x hoods available -Price: per piece -Overall dimensions: Ø 905 x 820 mm -Weight: 89 kg/unit

Dimensions: - Length: 3500.0 mm - Width: 1800.0 mm - Height: 1850.0 mm Weight: 5300.0 kg Paper Specifications: - Maximum Paper Length: 77.0 cm - Maximum Paper Width: 56.0 cm - Minimum Paper Length: 21.0 cm - Minimum Paper Width: 21.0 cm Production Capacity: - Maximum Sheets per Hour: 4600.0

Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Manufacturer: Kaltenbach, Double miter saw type DKL 500 -Cutting length: 245 to 4180 mm -Saw units: swivels 45° -Saw blade: Ø 490 mm -Accessories: incl. additional saw blades, see photos -Overall dimensions: 5130/1100/H1410 mm -Total weight: 1154 kg

PRODUCT SPECIFICATIONS Laminating Speed (m/min / feet/min) 10 / 33 Max. Laminating Film Width (mm / inches) 500/20 Minimum Paper Thickness (gsm) 135 Max. Sheet Width (mm / inches) 550/22 Warm-up Time (mins)10 Laminating Temperature Range (? / ?) 0-140/32-284 Control Panel Multi-Lingual LCD Pressure Adjustment Manual Film Core (mm / inches) 77/3 Power Supply AC (v, 50Hz) 220/240 Overall Dimensions (mm) 2050x1400x900 Power Consumption (W) 2400 Gross Machine Weight 220kg

electric motor, three-phase motor -Handover: in its current condition as inspected -Drive shaft: Damaged, see photos -Manufacturer: ETM, Electric motor type B5-80x0.55x1500 A -Power: 0.55 kW -Speed: 1380 rpm -Shaft: Ø 19 x 40 mm -Design: B5 -Dimensions: 265/198/H220 mm -Weight: 11.3 kg

The OR-M 510 is a high performance strapping machine perfect for high volume use from light to medium tension applications. Description Specifications: frame size B650 mm x H500 mm up to 65 strapping cycles a minute for PP () straps 9 or 12 mm wide and 0.55 mm thick, touch-panel operation automatic strap insertion, strap ejected if nothing strapped compact, can be used almost anywhere strap dispenser integrated in the machine Made in Switzerland

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Gear pump: for electric forklifts -Gear pump type: 1 547 220 500 / 0 542 015 083 271 -with tank and control valve -Drive: 24V 2kW -Dimensions: 140/200/H370 mm -Weight: 10kg

Pressure monitor, pressure switch, pressure limiter, gas pressure switch, gas pressure switch, gas pressure monitor -Manufacturer: Dungs, Gas pressure monitor, original packaging -Type: GW 500 A5 -Control range: 100 - 500 mbar -Pmax.: 600 mbar -Number: 3x pressure switches available -Price: per piece -Dimensions: 70/60/H40 mm -Weight: 0.1 kg/pc.

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, ventilation grilles, compact grilles, circulating air intake grilles -Manufacturer: Schako, compact grille ventilation grille ovp -Type: KG-R-8 515x65mm -Material: steel, galvanized -Total dimensions: 560/100/H60 mm -Weight: 1.8 kg

An injection molding machine Dr. Boy is available. Clamping force: 500kN, tie-bar spacing: 305mm/305mm, platen dimensions X/Y: 500mm/500mm, max. opening stroke: 350mm, max. platen spacing: 600mm, min. mold height: 250mm, max. screw stroke: 120mm. Machine dimensions X/Y/Z: approx. 3450mm/1050mm/2000mm, weight: approx. 2050kg, operating hours: 10524h. The system has minor defects requiring repair. Documentation available. An on-site inspection is possible.

Surface grinder, grinding machine, horizontal surface grinder, surface grinder, magnetic grinder -Manufacturer: aba Abawerk, surface grinding machine-horizontal type FFK with magnetic plate -Magnetic plate: 360 x 122 mm -Traverse paths: x 390 mm / y 170 mm / z 260 mm -Drive: 2.0 kW -Grinding wheel: Ø170 mm, max. 245 mm -Coolant device -Transport dimensions: 1120/1100/H1630 mm -Total weight: 604 kg

Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, filter dryer, compressor protector, suction line filter dryer -Manufacturer: Parker, Suction Line Filter Dryer -Type: SLD 13-5SV -Pressure: up to 400 PSIG / 27.5 bar -Dimensions: Ø 105 x 133 mm -Weight: 0.9 kg

A Rausch robot-based deburring machine is available. Support height: 1050mm, spindle speed: 50000rpm, power: 1kW, max. burr thickness: 0.2mm, max. workpiece diameter: 500mm, gear types: straight/helical/angled, max. helix angle: 40°, max. chamfer angle: 45°, max. workpiece length over chuck: 450mm, max. workpiece weight: 50kg. Machine dimensions X/Y/Z: approx. 2050mm/1200mm/2100mm, weight: approx. 1300kg, operating hours: 1271h, utilization time: approx. 8h. Documentation available. An on-site inspection is possible.

table diameter: 790 mm table load: 500 Kg swivelling range: 0 - 135 Grad turning speeds: max. 2,0 U/min connected load frequency: 400 V weight: 0,95 t Dimensions (LxWxH): 1,4 x 0,8 x 1,5 m Welding turntable incl. - Control column with foot switch - 630mm chuck - Chuck key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic press, pneumatic punch, multifunctional punch, punch, universal punch, punching machine, pneumatic hole punch, pneumatic press -Support frame: for press or punching tools -Upper part: adjustable stroke approx. 60 mm (without press cylinder) -Lower part: with ejection pneumatic cylinder stroke 30 mm -Projection: 220 mm -Dimensions: 500/440//H890 mm -Weight: 92 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 50 mm -Transport width: 590 mm -Shaft: Ø 15 x 11 mm -Quantity: 24x transport rollers available -Price: per piece, minimum order 3 pieces -Dimensions: Ø 50 x 620 mm -Weight: 0.6 kg/piece

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller track, carrier rollers -Conveyor rollers: transport rollers diameter 50 mm -Transport width: 533 mm -Shaft: Ø 8 x 10 mm -Number: 7x transport roller available -Price: per piece -Total dimensions: Ø 50 x 566 mm -Weight: 1.4kg/pcs

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 50 mm -Transport width: 530 mm -Shaft: Ø 16 x 15 mm -Quantity: 1x transport roller available -Dimensions: Ø 50 x 530 mm -Weight: 1.3 kg/piece

Inductive sensor, electronic sensor, sensor cable, connection cable, connection cable -Manufacturer: Leuze electronic, connection cable sensor cable Ovp -Type: KD M12A-4P-5m-PVC -Part No.: 50104544 -Number: 2x cables available -Price per piece -Dimensions packaging: Ø 200 x 30 mm -Weight: 0.2 kg/pc.

Geared motor, electric motor, three-phase motor -Voltage: 48 volts -Motor manufacturer Bonfiglioli Type: BC270 -Manufacturer of gearbox: Bonfiglioli, Type: 1V 50U02A -Speed: 24 rpm -Power: 0.75 kW -Design: B14 angle -Hollow shaft diameter: Ø 28 mm -Protection class: IP 54 -Number: 1x motor available -Dimensions: 435/160/H170 mm -Weight: 19 kg

Cylindrical vibrator, tumbling facility, tumbling machine, mass finishing cylindrical vibrator, tumbling facility, continuous vibrator, vibration conveyor, oscillating conveyor, conveyor trough, spiral conveyor -Round vibrator: with soundproof hood, small waste water system with spray device -Manufacturer: CETEMA, round vibrator type TM 500A -Working container: elastically mounted -Total volume: 500 liters -Outer diameter: 1450mm -Working basin width: 430 mm -Working basin height: 510 - 580 mm -Machine for: deburring, polishing, rounding edges -Dimensions machine: 1570/1430/H1140 mm -Dimensions of waste water system: 1010/520/510 mm -Total weight: 1450 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers with plastic attachment, diameter 65/89 mm -Transport width: 570 mm -Quantity: 1x transport roller available -Dimensions: Ø 90 x 595 mm -Weight: 3.9 kg

diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manufacturer: Bosch, injection pump from generator MWM RHS 518V16 -Injection pump: Bosch EP/RSUV300-750P9/332/1R PE8P120/520RS190 -Feed pump: Bosch FP/K 22 P11 -Shaft: Ø20 - 25mm / M18x1.5 -Individual components: see photos -Dimensions: 1000/170/H290 mm -Weight: 41 kg

Spare part for grinding machine, angle grinder, lathe tool grinder, tap and die grinder, milling cutter grinder, surface grinder, drill grinder -sold as a source of spare parts -Adjustment device: for grinding machine -Type: unfortunately without a type designation -Details: see photos -Dimensions: 580/400/H500 mm -Weight: 120 kg

Socket distributor, portable distributor, solid rubber distributor -Manufacturer: Bals, solid rubber distributor type 524446 -4x: earthed socket 16A 230V -1x: CEE socket 16A 400V -1x: CEE socket 32A 400V -1x: CEE socket 63A 400V -Protection class: IP44 -Transport dimensions: 400/340/H350 mm -Weight: 15 kg

Single-phase isolation transformer, isolation transformer, solid rubber distribution box -Manufacturer: Gifas, Isolation transformer, solid rubber distributor -Type: 500 Item No. 65T0500112P42ZF -Primary: 220 V 50 Hz -Secondary: 42 V see photo of nameplate -Power: 500 VA -Dimensions: 320/230/H265 mm -Weight: 12 kg

Control unit, control element, interface -Manufacturer: Jungheinrich, control unit from electric forklift ERC 205 / ECE 20 / ESE 320 -Type: 2x PM2402L/2 / 2x PM 2402 L -Mat-No.: 50306778 -Voltage: 24 V -Quantity: 2x control unit available -Price: per piece -Dimensions: 170/135/H70 mm -Weight: 0.8 kg/pc.

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from order picking forklift type ECE 20 -Hydraulic pump: Type 50125677 -Motor: Type AU3480 24V 1.5kW -Dimensions: 200/175/H360 mm -Weight: 9.7 kg

Control, control part, interface -Manufacturer: Jungheinrich, control from pedestrian stacker EJE-KmS -Type: MP 1510 C/3 -Mat no.: 50034882 -Voltage: 24V -Number: 3x control available, 1x with 2x without bracket -Price per piece -Dimensions: 330/215/H110mm / 240/190/H110mm -Weight: 5 kg/pc. / 3.9kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump hydraulic unit from order picking truck Jungheinrich type EJE-KmS -Hydraulic pump: type 0 542 015 145 -with: tank and control valve -Dimensions: 180/160/H370 mm -Weight: 11 kg

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, axial fan axial fan -Type: unfortunately without type designation -Motor: 380V -Fan: Ø 590 mm -Number: 2x fans available -Price per piece -Dimensions: 590/590/H220 mm -Weight: 13 kg/pc.

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic unit from Jungheinrich order picking forklift type EJE-KmS 16G-24-140-56 -Hydraulic pump: Type 0 542 015 145 -Motor: Type 1 547 220 506 24 V 2 kW -with: tank and control valve -Number: 2 units available -Price: per piece -Dimensions: 210/180/H370 mm -Weight: 11 kg/pc.

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from picking truck type ECE 118 -Hydraulic pump: type 50125677 -Motor: Type AU3480 AMJ5729 24 V 1.5 kW -with: tank and control valve -Number: 4x unit available -Price per piece -Dimensions: 200/180/H370 mm -Weight: 10 kg/pc.

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump, hydraulic unit from Jungheinrich electric forklift type ECC 10 G 115-90 E -Hydraulic pump: Type 0 542 015 121 -Motor: Type 1 547 220 532 24 V 2 kW -with: tank and control valve -Number: 2 units available -Price: per piece -Dimensions: 220/150/H520 mm -Weight: 10 kg/pc.

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump hydraulic unit from electric forklift Jungheinrich ESE 320 G 20-240-54 -Hydraulic pump: Type 0 542 015 191 -Motor: Type 1 547 220 535 24 V 2.2 kW -with: tank and control valve -Dimensions: 175/160/H365 mm -Weight: 9,6 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump hydraulic unit from electric forklift Jungheinrich type ECE 20 -Hydraulic pump: Type 0 542 015 191 -Engine: Type 1 547 220 524 24 V 2.2 kW -with: tank and control valve -Quantity: 2 pieces available -Price per piece -Dimensions: 220/120/H370mm -Weight: 9 kg/piece

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from picking truck type ECE 20 -Hydraulic pump: type 5090979 -Motor: Type AU3480 24V 1.5 kW -with: tank and control valve -Dimensions: 200/180/H370 mm -Weight: 9.8 kg

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from Rapid RVT 2500 electric forklift -Hydraulic pump: Hidroirma type UP100K163-01 -Motor: Efel 36808 24 V -with: tank and control valve -Dimensions: 210/170/H360 mm -Weight: 10.5 kg

Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, circular table saw, circular saw -Manufacturer: White Paisley, table saw on solid base -Motor power: 6.3 kW / 1430 rpm -Saw blade: Ø 550 mm -Max. Cutting height 180 mm -Cutting width: up to 455 mm -Table height: 850 to 1000 mm -Chip extraction: Extraction system can be supplied at an additional cost -Dimensions 1240/1100/H1500 mm -Weight: 762 kg

Oil hand pump, oil cabinet, oil dispenser, oil pump, oil dispensing system, oil delivery device, oil station, oil centrifuge -Handover: in its current condition as inspected -Level indicator: missing, condition as shown in photos -Manufacturer: Tecalemit, mobile oil dispensing device with hand pump -Item No.: 1.520201.1 -Tank capacity: approx. 30 liters -Pump: hand-operated -Hose: can be shut off with tap -Dimensions: 500/440/H820 mm -Weight: 17 kg

Motor grinding spindle, grinding spindle, high-performance grinding spindle -Manufacturer: FS / JE, motor grinding spindle from CNC machining center Santenberg GTC S 2 -FS Heinz Fiege: Type: HSP 190 182.532.01 -JE Jaeger- engineering: Type PS 200/6300min/1 GS-100-0009 -Spindle: JE type 9SH1020A042000 -Dimensions: see photos -Number: 2x spindle available (1x right, 1x left) -Price per piece -Dimensions: 820/610/H530mm / 820/500/H520mm -Weight: 185kg / 180kg

Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 -Motor: AEG 380V 8 kW 1400/2850 rpm -Dimensions: see photos / technical. drawing -Dimensions: 1700/580/H700 mm -Weight: approx. 525 kg

Ball screw with nut, transroll screw, ball screw nut, lead screw, threaded rod, threaded bolt, threaded rod, ball screw, linear bearing, precision ball screw -Manufacturer: Mikron, ball screw from CNC milling machine Mikron WF 51C/155 -Thread length: 540 mm -Shaft: Ø 32 mm -Dimensions: see photos -Dimensions: 870/140/H130 mm -Weight: 18kg