5 axes machining used for sale

Arburg 570C 2000-350/150 / Production line with the Arburg Multilift side robot / 2K machine Year of Make: 2003 Injection unit: Screw diameter: 40 mm Injection weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Production line with the Arburg Multilift side robot 2K Machine Air Valve x 1 Hydraulic core pull x 5 Control with hot runners Reinforced Injection Units – Bimetal Proportional valves on sprinkler units - precise spraying The vertical injection unit - screw diameter: ⌀25 mm - 49 g/hp All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine o ...

This WEINIG Unimat 500 was manufactured in 2005. A robust woodworking machine featuring a working range of 230 x 120 mm and five spindles, it ensures efficient processing with variable feed speeds from 4 to 30 m/min. Spindle power outputs include 4 kW for infeed and outfeed, and 7.5 kW for right/left and top spindles. Consider the opportunity to buy this WEINIG Unimat 500 woodworking machine. Contact us for more information about this machine.

Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of Make: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Machine with two cylinders / battery with compressed ni ...

This Priess & Horstmann PBA-52M was manufactured in 2000. It is designed for woodworking applications, providing reliable performance for various wood processing tasks. If you are looking to get high quality woodworking capabilities consider the Priess & Horstmann PBA-52M machine we have for sale. Contact us for more information.

Key data: 2000 kN

Arburg 570H 2000-800 e² / Hybrid machine / Production line with the Arburg Multilift Select robot Year of Make: 2011 Injection unit: Screw diameter: 50 mm Injection weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 2 Control with hot runners x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lu ...

This Krauss Maffei 110-520 C1 was manufactured in 2000. It features a MC4 controller, Euromap Interface 12, and a hydraulic unit. With a screw diameter of 45 mm, it offers a maximum pressure of 1878 bar and an injection volume of 275 cm³. Consider the opportunity to buy this Krauss Maffei 110-520 C1 hydraulic injection moulding machine. Contact us for more information.

This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5 full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us.

This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 2000 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine.

Trumpf TruLaser 5030 with double tower storage system - laser cutting system - Working area: 3000 x 1500 mm - Laser power: 5000 W - incl. LiftMaster Compact & TruStore 3030 - Year of construction 2013 Facilities - Working area: 3000 x 1500 mm - Closed machine frame - Integrated cabinet - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drive - Closed beam guidance via optical cable (LLK) - Machine cooling unit (water-air) - Integrated control cabinets with interior lighting - TruDisk power supply via the machine - Longitudinal conveyor belt - Work area lighting - Position laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Trumpf Laser - LLK according to standard layout (laser right next to the machine) - Laser cooling unit (water-air) - Excitation ...

This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. Its an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information.

Used Used labeller P.E. 4.500 bph: Year: 1998 Condition: Good Used labeller P.E | 8T adhesive Year: 1998 Speed: 4.500 bph Direction: Counterclockwise 8 heads Nr.3 adhesive stations Nr. 2 cold glue stations Safety protections Code: EA 448 More details: https://bottlingscout.com

This DEMAG Systec 210/580-840 was manufactured in 2019. Its a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information.

This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information.

Scania Emergency Power Generator 500 / 550 kVA NEW - - - - - Engine: - Scania (Sweden) - Model: DCI13 - 6 cylinders - Diesel - Water-cooled - 1500 rpm - Power: 582 hp - - - - - Generator: - Leroy & Somer (France) - 500 / 550 kVA - 230 / 400 volts - 50 Hertz - AVR regulator - - - - - Control / Switching Unit: - Digital start unit with display (ComAp AMF25) - With automatic start function - Generator monitoring: Volts, Amperes, Hertz, KW - Engine monitoring - - - - - Other data: - Dimensions: 516 x 160 cm - Weight: 3950 kg - Tank capacity: 990 liters - Consumption: 48.8 l/h (50%) / 71.7 l/h (75%) - - - - - Scope of delivery: - Scania generator set 500 / 550 kVA - In a soundproofed housing - With start unit / control - Tank - Battery - Exhaust / silencer - - - - - Price and payment: - €51,000 net + 19 % VAT = €60,690 - I ...

This Netstal EVOS 5500-2900 Speed was manufactured in 2014. Ideal for high-speed plastic processing, it ensures efficient operations with its robust design. If you are looking to get high quality injection molding capabilities consider the Netstal EVOS 5500-2900 machine we have for sale. Contact us for more information.

TRUMPF TruLaser 5030 fiber laser was built in 2010 in Germany by TRUMPF Maschinen Grüsch AG. The machine, which is designed for precision cutting of thin and medium-thick sheet metal, is used, among others, in the automotive or aerospace industry. Thanks to its high efficiency, the TruLaser 5030 is ideal for both prototyping and mass production. Workpieces are machined by means of a stable 3 kW fibre-optic beam, which is generated by a laser source of the highest energy efficiency. Fibre optic technology increases machining speed and efficiency while minimising material loss at the same time. All this is complemented by an advanced CNC controller with all the necessary functions. The TRUMPF TruLaser 5030 L41 fibre laser weighs 12000 kg. Technical specifications of the TRUMPF TruLaser 5030 laser cutting machine - CNC control: TRUMPF - laser power: 3 kW (3000 W) - feed in the X/Y/Z  ...

This Takisawa EX-508 was manufactured in 2006. A horizontal turning machine featuring a turning diameter of 300 mm, length of 380 mm, and a robust 12-position turret. It includes a Fanuc 18 i TB control, ensuring precision and ease of operation. Ideal for detailed turning tasks, it also boasts a spindle motor power of 11/18.5 kW for demanding operations. For more information about this machine, please reach out to us.

Manufacturer ZAYER Model 30 KMU-5000 Year 1999 CNC HEIDENHAIN TNC-430PA Table surface 4,700 x 1,200 mm. Strokes (X/Y/Z) 3,400/1,250/2,000 mm. Shaft Outlet (W Axis) 500 mm. ISO-50 Head Cone Main Motor Power 37 kW 45º Automatic Head INCLUDED Head Rotation 45º Automatic Rotation 0.001º/0.001º Head revolutions 45º 3,000 rpm 45º ISO-50 Head Cone Continuous Twist Head INCLUDED Twist head revolutions 3,000 rpm Twist Head Cone ISO-50 Ram with cane INCLUDED Shank diameter 150 mm. ISO-50 Rod Cone Internal and external cooling head 45º and rod INCLUDED External cooling twist head INCLUDED Semi-automatic head pickup INCLUDED Automatic Loading Tools INCLUDED Loader Positions Htas 60 AITEK Pickup Station for 45º head storage and Twist Head INCLUDED Chip Evacuator INCLUDED HEIDENHAIN HR-410 Portable Steering Wheel RENISHAW MP 16+SP2/1 Piece Measurement Probe Motors + ...

Lathe Böhringer DUC 560 BJ 1995

Max. feed length: 2,600 mm Direct input of the dimension via touchscreen or via glazing bead calipers Profile slide can be folded up for insertion

ICS Chiller - Second Hand Year of Manufacture: 2016 Type - iC 535 Weight: 722kg Refridgerant: R410A Electrical Supply - 400V/3PH/50Hz Cooling Capacity: 41KW For more information and more available stock please visit us at - advancedbrewing.co.uk

Certus Steam Boiler & Water Tank Type: Junior 500 CVE Manufacture Year: 2012 Please see photos for further specification and information. For more information and more available stock please visit us at - advancedbrewing.co.uk

For sale is an EPS block mold, manufacturer Erlenbach, year of construction 2008, 5000 mm x1300 mm x1000 mm, vacuum system, The system ran very well until the end. The facility can be visited by prior appointment

For sale is a Styrofoam block press manufacturer Wemhöhner, the press is in good condition and can be viewed by appointment. I will be happy to answer any further questions you may have.

IDEAL 5221-90 – Professional Pile Cutting Machine Powerful and precise paper stack cutting machine for printers, copy shops and offices. The IDEAL 5221-90 impresses with a cutting width of 520 mm and a cutting height of up to 80 mm, ideal for large paper stacks. The electric backgauge with digital measurement display enables fast and accurate work. Thanks to high-quality Solingen knife steel, clean and precise cuts are guaranteed. The SCS safety system ensures maximum safety during operation. ✔ Cutting width: 520 mm ✔ Cutting height: up to 80 mm ✔ Electric backgauge ✔ Digital measurement display ✔ Robust professional quality Ideal for professional cutting work with high demands on precision and reliability.

Flat conveyor belt on aluminium substructure Length of the strap 515 cm, width of the strap 85 cm With the regulation of the amount Conveyor belt mobile, on wheels

Die cutter Heidelberg SBG 56X77

Cart beam punching machine / travelling head die cutting press 25 ton, 1600 x 500 mm, punching head 500 x 500 mm with 2-hand touch triggering, with light curtain approx. 1500 kg

VERTICAL MULTISTAGE PUMP C/W 4KW MOTOR, 4 POLES AND 50HZ

This BOMAR Individual 520.360 GANC was manufactured in 2019. It features an automatic operating mode with a mitre cutting range of 0° – 60°. The saw band operates at speeds between 20 – 120 m/min, accommodating a maximum material weight of 2,500 kg. Ideal for those looking to enhance their metal cutting capabilities. Contact us for more information about this machine.

This TRUMPF Trulaser 5030 Fiber was manufactured in 2011. A robust fiber laser cutting machine, it features a 3000 Watt laser output and a working area of 3000 x 1500 x 115 mm. Capable of cutting up to 20 mm steel, 15 mm stainless steel, and 15 mm aluminum, it operates with a Siemens Sinumerik 840 D control system. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 Fiber machine we have for sale. Contact us for more information.

This 5-axis Cosmec Conquest 515 was manufactured in 2021. A robust CNC processing center featuring a fixed work table, double-sided driven traveling portal, and a continuously interpolating 5-axis milling spindle. It excels in machining solid wood, wood-based materials, and plastics. Key features include dual gantry motorization, high travel speeds, and a 5-axis spindle with liquid cooling. Ideal for high-precision tasks. Contact us for more information about this machine.

This 3-axis HOMAG WEEKE OPTIMAT BHX 500 was manufactured in 2011. It features a robust CNC processing center with a working area of 2500 mm by 1300 mm, main electrospindle power of 6 KW, and a maximum panel thickness of 80 mm. It includes 84 drilling spindles and dual milling spindles, each offering 6 KW at 18000 rpm. If you are looking to get high-quality CNC capabilities, consider the HOMAG WEEKE OPTIMAT BHX 500 machine we have for sale. Contact us for more information.

This Krauss Maffei 150-520 C2 was manufactured in 2002. It features a screw diameter of 40 mm and includes a Sepro robot and a storage conveyor belt from 2014. The machine is operational, with pump operating hours at 50,327 and automatic operating hours at 36,908. Consider the opportunity to buy this Krauss Maffei 150-520 C2 hydraulic injection moulding machine. Contact us for more information about this machine.

Thread grinding machine WMW 5822M with change gears.

This Netstal S 6000-5500E was manufactured in 2004. A hydraulic injection moulding machine featuring a tie bar distance of 1020 x 1020 mm and an opening stroke of 950 mm. Equipped with 1 core valve, 2 air valves, and a screw diameter of 100 mm. It also includes an EU 12 for robot connection. For more information about this hydraulic injection moulding machine, please reach out to us.

Manufacturer: Jung, Model: JF 520 Year of Manufacture: 1979 Machine Type : Grinding Machine Electrical Specifications - Voltage: 380 V - Phases: 3 - Frequency: 50 Hz - Nominal current: 30 A - Supply fuses: 35 A - Control voltage: 220 V Find more here - / Contact us at -

Manufacturer: Arburg Model: 520S 1500/800 + Robot Type: Injection moulding machine Year of manufacture : 2010 Operating hours: 91720 Closing force: 150 t Screw diameter: 45 mm Max. injection volume: 318 cm3 Fixing plate: 688 x 688 mm Machine weight: 6.84 t Find more here - / Contact us at -

Manufacturer: HP Model: Latex 570 Technical Specifications - Print width: up to 64 inches (1,630 mm) - Media width range: 10 to 64 inches (roll feed) - Print resolution: native 1200 x 1200 dpi - Print technology: HP Latex water-based ink - Ink system: 7 colours - black, cyan, magenta, yellow, light cyan, light magenta, HP Latex Optimizer - Ink cartridge size: 3-litre HP 871 Latex cartridges (hot-swappable during printing) - Print heads: 7 (user-replaceable, with automatic nozzle compensation) - Maximum print speed: up to 91 m2/hr (draft mode) - Indoor quality speed: 23 m2/hr - Outdoor high-speed (4-pass): approximately 31 m2/hr - Maximum roll weight: 55 kg (121 lb) - Colour accuracy: delta E2000 less than or equal to 2 for tiling applications - Length accuracy: +/- 1 mm/m - Connectivity: Gigabit Ethernet, HP Latex Mobile app (remote monitoring) - Condition: used, second-hand Find mor ...

Tünkers Liliput 500 banding machine; Condition obsolete; Working width 500mm; Speed adjustable; suitable for cold glue. Gluing machine Tünkers Liliput 500; condition rebuilt; working width 500mm; adjustable in speed; used for cold glue.

Ryobi 526 GX Typ 6-8, Built: 2007, Impressions: ca. 54.8 Mio. Printing units: 6 ,Format max.: 37,5 x 52 cm, Perfecting: NO Equipment: Suction belt feed table, pull mark presetting.semi-automatic plate changer, Ryobi PCS-H control console.automatic blanket washing device, automatic inking roller washing device, electronic double sheet control, IR dryer, serial equipment and manuals. Available immediately.

Turbo Coolant Cleaning System Type 15 Suitable for bypass cleaning of max.80l/min. Emulsion at an operating temperature of +10C to max + 60C Nameplate centrifuge: AZF-T15.5917 Centrifuge Number: 25115 Plant number: 15181 Operating voltage:400 V/50Hz Control voltage: 24 V DC Weight Br. 6132 kg Year 2018 Original price: 36.600 € Centrifuge defective, needs to be repaired.

Cincinatti Machining Center, 2 Available: Arrow/Milacron 500, built in 1995 & 2000 Technical data: Travel (X / Y / Z) 510 mm / 510 mm / 510 mm Work table (L × W) 700 × 520 mm Maximum table load / workpiece weight approx. 350 kg evenly distributed Tool changer (tool magazine) 21 tool positions Spindle holder / tool holder SK 40 Spindle speed (min–max) 60 – 6000 rpm (sometimes specified for newer variants up to 8000 rpm) Machine weight approx. 3050 kg (≈ 3 t) Dimensions approx. 2000 × 2650 × 2700 mm (L × W × H) Number of axles 3-axis CNC

sheet width: 2040 mm plate thickness: 4,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 3,00 t dimensions of the machine ca.: m Controlled backgauge up to 1000 mm Side fence and table extensions Cut length limiter Cut edge lighting Sharpened blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 220 kN sheet thickness - max.: 8 mm travel -x axis: 2500 mm travel -y axis: 1250 mm : 90 m/min : 60 m/min : 108 m/min : 360 °/sec punch diameter: 76,2 mm workpiece weight: 150 kg : 0,01 mm bzw. 0,01° : 15 Stück tool changing time: 1,5 - 6,5 sec weight of the machine ca.: 11.050 kg dimensions: 6400 x 5800 x 2100 mm Working hours: 30.430 h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mm plate length: 1250 mm plate thickness: 8 mm Punching capacity: 220 kN Number of working hours: 51.658 h total power requirement: kW weight of the machine ca.: 11.050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 570 mm turning length: 2000 mm control: num + CNC Keller centre height: 280 mm turning dia. over face-slide: 365 mm spindle bore: 62 mm spindle turning speed range: 3 - 2500 U/min spindle head: DIN 55 027 Gr. 8 cutting speed: Konstant 1 - 9999 m/min feed in x - axis: 0,01 - 50 mm/U feed range Z-direction: 0,01 - 50 mm/U rapid travel - longitudinal/face: 10 / 5 m/min feed power: x-Achse 7100 N feed power: z-Achse 12.500 N travel of cross-slide: 345 mm upper slide travel: 125 mm bed width: 360 mm tailstock quill diameter: 80 mm tailstock quill stroke: 190 mm tailstock taper MT: 5 max. workpiece weight -without tailstock: 400 kg max. workpiece weight between centres: 1000 kg max.workpiece weight:each extra steadyrest: 300 kg threading metric: 0,1 - 400 mm/Stg. dimensions of machine L x W x H: 3,98 x 1,87 x 1,81 m total power requirement: kW weight of the machine ca.: t A ...

Key data: 500 mm

Max. saw length: 5,000 mm Max. saw blade diameter: 500 mm Automatic positioning of length and angle (90° or 45°), intermediate mitres adjustable from the front Moving roller conveyor Material support pneumatically folds up Minimum quantity spraying device Instruction manual Weight: 1400 kg

workpiece diameter: - mm grinding depth: - mm clamping length: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 510 mm cutting diameter: 150 mm capacity 90 degrees: flat: 450 x 150 mm capacity 90 degrees: square: 150 mm turning speeds: 29 / 58 m/min. total power requirement: 4,2 kW weight: 1,55 t range L-W-H: 1,8 x 1,7 x 1,7 mm Long-cut cold circular saw, semi-automatic - with miter adjustment left 50°, right 60° - digital cutting angle display - hydraulically adjustable feed speed - hydraulic workpiece clamping - 4 spare saw blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.